Graviflyer Testing 6 "Pushing The Field"
HTML-код
- Опубликовано: 28 апр 2024
- This video show how far the field can be pushed out at low voltage 15v on the tesla coil. One flyback connected to the rotating disc's. Coil directly connected to the #2 coil of the tesla coil.
My Graviflyer facebook group
/ 398834436300401
Graviflyer on X
x.com/OldManBuilds/status/178...
![Gunna - whatsapp (wassam) [Official Video]](http://i.ytimg.com/vi/bY1kLt4iz94/mqdefault.jpg)
if you look up "the "1952 UFOs Over Washington DC" Video " you can see the ufos have these fields that extend 100s of feet for each craft and they also pulse about ever 1/2 second.
that is very cool.
I keep having this thought pop in my head watching your updates…
The paper cones show an effect,
But the flat discs don’t… what if you tried some cone shaped spinning discs…
The cones on this device won't help. It will cause the charges to only be on the ends. Electricity finds the shortest to to make contact always.
@@nathanbunten4299 ruclips.net/video/eOT_G-1ogn4/видео.htmlsi=P7U45fslebCNTayq
Another intriguing video:)
Thanks again!
"IF YOU HAVE A PACEMAKER, STAY AWAY FROM DEVICE"😅
that's good advice.
39" = 990.6 kHz mass vibration, the energy that forms structure.
Question. If I set my high voltage coil to that same frequency. Would the effect be bigger or more powerful inside the same area? Also if I wanted the static field on the inside to be a little smaller then somewhere around 900khz would do it?
@@nathanbunten4299 You are working on new ground, I stopped working with HV back when I was blowing up magnets. I know HV has a Tempic field frequency [The A field vibration inside the wire loops] but I can relate it to low voltage. 1 volt will vibrate up at 1 mm on a SS caliper. 12 vdc will vibrate up at 12 mm, for detection. I can read the voltage on a battery using a SS caliper. I have never attempted it with High Voltages, but there would be a way to scan it using the caliper. Decide how large you want your field bubble to be and cut an aluminum tube to that length on its radius, and when you hit it then from some distance away you will feel it vibrate up in your hands without any high voltage on that element.
I actually have an aluminum tube that can tell if an AC power panel is pulling a load. 200 mm long it will vibrate up when pointing it at a power panel that is loaded, this is only for our 60 hz power however.
I have had the same kind of spark leakage in different experiments. I took my hot glue gun and liberally filled the pin side of the flyback transformer with hot glue. The over sparks stopped.
I cannot do that here.
@@nathanbunten4299 Ah, gotcha!
i am wondering looking at this 15vdc in ? amps. This could be great to measure the output to see if you have a COP plus ?
I order a new power supply that tells the volts and amps used so when I have it I will show the numbers.
Have you checked continuity between plates? As I understand it, the middle plate is not supposed to electrically connected to any of the plates, but when your experiment sparks, it seems like it sparks from top plate, to center and through the chassis to the bottom plate.. High voltage can easily jump gaps, I think there is bad insulation between the chassis and the bottom disc.
I have 2 fields pushing against each other causing spikes in voltage.
@@nathanbunten4299 are the fields... 🤔🤔🤔n/s,s/n..... s/n,n/s🤔 or in line like n/s,n/s..?
@@gypthcnuryse7611 I don't have a way to test. The static meter doesn't show it.
@@nathanbunten4299 the way you stacked the magnet when you built it they push or pull ... I kinda remember a video I think u said it was ... s- poll on bottom? So I'm guessing you have the 2 n+ polls 🤔 against the center plate. And the static charge is building up there. 😆 I think I need to rite some notes 📝 this thing so cool 😎
Is this device using the same concepts that were just supposedly discovered by NASA? Supposedly able to generate more than 1G of force without any typical chemical propulsion.
The static experiments. In some ways yes. But from what I have seen they use 1:1 on the size between plates of material.
Does the stand need to be metal? Just wondering if you’d want to promote charge transfer via discs rather than the legs
there are 2 fields. One has to be inside the other the frame helps with that at low power. So yes it needs to be metal.
When you say 15v on the Tesla coil what frequency is it at? Is this the input side of the Tesla coil that you’ve connected or the output? I’m surprised because in addition to high voltage used it looks like there’s sparking going on which would seem to suggest high voltage (?)
The frequency of the center plate changes the oscillation frequency of the tesla coil. It is making the voltage spike and causes the interaction of the high voltage on the disc's to amplify. 15v is what is going into my tesla coil circuit. I will run a test with just my tesla coil in the same spot as my graviflyer and show that it cannot do the same at 15v. It would take 40v to go that far.
I really want to see it with the tesla coil in the inside, like in your over unity video, that needs to be on video (but outside ofc)
I agree. I am setting up for it. I have to build holders for the florescent tubes to sit in.
🎉🎉🎉
I started a facebook group for the graviflyer facebook.com/groups/398834436300401/
BTW the reason the camera quality seemingly decrease is because of the low light conditions, I dont see anything that would suggest something different going on. To be honest I think you just have a pretty powerful spark gap transmitter here, if you get better brushes or just used a strip of metal, I bet the "field" you are experiencing would decrease significantly.
If you stop the discs spinning, does the "field" go away?
the field decreases.
your pushing way too much power. your field shouldnt be no more than on the craft itself. another words, it should only light up when you touch a bulb to it
It is only 15v. My tesla coil circuit starts working at low power of 12v. The high voltage is 12v in. This field should have never been this big. I have found a resonance point in the rotation of the discs. I have to follow where the test leads me and the power is one thing that keeps happening.
@nathanbunten4299 look into different transistors
He may look like he’s making a UFO.
Bro actually looks like he’s actually accidentally inventing a better form of wireless energy transfer.
I thought I knew what you were doing.
Now I wanna see you get rich on accident
Imagine lights just being tubes with gas. No metal. Nothing more. Nothing less. Just gas and glass.
Pop them in a holder in the ceiling near the center of the room and boom.
No wires. No extra materials.
Just a “UFO” in the middle of the room and gas in glass. Modern lighting.
I do believe the future of electricity is “teleporting” electricity across distances. The farther the more popular the brand becomes.
We’re going to get bored of batteries soon. The real next landmark in technology is getting a car to run off of the many forms of energy we swim in daily. Without a generator (engine) or batteries. You too Hydrogen.
We had radios that worked off a simple coil of copper rolled around a toilet paper roll end up as kid projects. No batteries.
I believe a Tesla can run off the same energy.
Frequency and amps will determine how well.
To set a base. A parked Tesla computer only running will be eye opening.
Capacitors might be cheating but kinda can’t avoid them in modern electronics. Just avoid a direct power source. Not RAM power source
That would not be my lunk but I will take it.
You can use Faraday cage on your camera.
That sounds like a plan.
@@nathanbunten4299 also do not put the lights near the cables to make sure its an actual field size that causes the lights to flicker and not the field from the cables.
@@raysplay2827 I know, I tested the cables for leakage. I normally use coax cables to test with. Th insolation is 10x better.
@@nathanbunten4299 that's great. i mentioned this for video footage so no one can say its a hoax due to the lights being near a cable. keep up the amazing work, i am rooting for you.
@@raysplay2827 I don't need the cables to show it bigger. I can push this field out 20 feet. In fact it is one of my next tests before I Force the fields back in to a bubble.
Is ur ultrasonic pezzo going?
no. just the HV and TC and motors.
@@nathanbunten4299 with the field the tesla coil is making ..are you able to test the magnetic strength 💪? It would be nice if it was the thrust factor ..when you turn the pezzo off it becomes a receiver and dumps ?? into TC? I need to rewatch some more and i need to watch the build .. your content is great 👍
@@gypthcnuryse7611 I am having trouble with the piezo making changes. It runs and can be seen on the oscilloscope but I do not see the change.
@@nathanbunten4299 ruclips.net/video/CncGLXxG3ZE/видео.htmlsi=fkJVAOMlKQHX2V0P this was a cool demonstration
You know this makes me think. How does the small fiber stay afloat. Like nothing but the air is effecting it 🤔. Might you see the charge within that fiber. If you want to beat gravity you must first understand magnetism. Thr bifilar coil holds many secrets. You ever check out any metamaterials??? Nice work btw
I always see it like a magnet down a aluminum pipe. The electrons are trying to form bonds but can't hang on to them for long.
@@nathanbunten4299 interesting proposal. you do realize no electron has even been recorded in history correct? It's neutral to the medium how I see it. It's quality is high due to it's lack of quantity. A magnet is the same before and after it's been magnetized. It's quality is a different story. Nikola Tesla was no atomist or materialist. he didn't say electrons rather the Æther. Steinmetz and Maxwell had good ideas for it as well
@@michaelmyrick6973 Tesla was also said to magnetize wood. To everyone this would look like that. ruclips.net/video/XRfYpcyDoLg/видео.htmlsi=lTf5ukiZo5GZTLrc
What is really going on is polarization. I believe it is what make up our magnetosphere. The same test done on my graviflyer where it is connected to the center plate also shows this effect wood sticks to it by a polarized bond. It is aluminum. No magnet can do this.
What I am saying is the field is already everywhere. We always want to know what to solve for in antigravity. This would be our first clue. A mix of polarized fields that will react like static charge.
It is why I am testing my Graviflyer with this field on the outside or whole frame. There is a lot there to figure out.
@@nathanbunten4299 everything is a Æther modality natural everything has a frequency and capacitance.
@@nathanbunten4299 agree the field is everywhere. The greatest minds called it the Æther. Illumination isn't a duality or a particle it's the modulation of the medium.
The magnet arrangement need a thorough reconfiguration
Veritasium channel has a video on magnetic levitation that will surely help
I am also curious if you feel anything in your body while near to it.
no not this time the power is way down.
Did you know that spiders can fly using high voltage static electricity ?? Should be researching that instead of this ....
I do research static electricity. In this device.
Nathan, it is not the camera going bonkers. You are affecting the universe in the area of your device. The universe flashes on and off. It is first matter and then antimatter that leads to the conservation laws. The black hole particle in my spectrum gets red shifted by the big bang gravity field to make all other particles and waves. By producing gravity waves with your device, you are affecting this flashing on and off to a different frequency, so you see the camera flashing. I know this from working with my science colleague Christopher. With the flashing on and off of the universe you see reality as a stable picture in the matter part of the universe where you reside. It is the hologram. The universe flashes on and off at the Planck time but you are upsetting this.
It’s producing electrical interference not “gravity waves”.
LIGO goons would probably be knocking on his door.
If the fantastical, standard model worked, we would have had these things flying 100 years ago.
The simple explanation is, æther.
Black holes dark matter etc are fudge factors for a model that doesn’t fit reality. Like a folded up napkin under a wobbly table.
If your science friend Christopher is telling you this, he is well indoctrinated into the confusion cult that is Scientism.
Antigravity is impossible in the standard model.
It is frustrating to see so many people trying to make it fit with ridiculous vocabulary.
So, I’m sorry if this sounds harsh.
I don’t blame you we are all expected to believe in it. “Shut up and calculate” right?
The Electric Universe model predicts antigravity. Take a look see which makes more sense to you.
Bro stop feeding this man's decision
@@RoboArc ?????
Richard I don't think this has anything to do with gravity waves or antimatter. To get quantum like effects the field would have to be over 10^18 v/m, and to produce gravity waves at a microwave frequency you would need an energy equivalent = to 100 masses of Jupiter. Jack sarfatti talks about this with his meta material idea, in that if you want usable gravity waves you need to overcome the weakness of the gravity coupling 8piG/C^4 which is on the order of 10^-41. I don't think we are overcoming 41 orders of magnitude with some scrap parts and a tesla coil tbh.
@James-wk1ym bro thank you for posting the math, I didn't want to get into it and post a huge long rant about it.
But yeah just having some knowledge of the math here it's not going to happen 😄 doesn't have the power and he doesn't understand how the charge needs to be applied to a surface of an object to produce lift.
Why not try the high voltage test without rotating, you will find it has nothing to do with rotation!
I did try it. Rotation is absolutely needed to push out the field.
Black & White TV was built first and then it had several stages, from round screen to semi-round screen, and then rectangular screen, and then flat screen. With these three achievements the Yoke coil, and vertical and horizontal sweep were modified, then in order to increase the picture quality the sweep rates were changed and then inter-laced techniques were used. In all that there was one definite principle and that was when electrons hit the phosphorus coated glass in vacuum it shines. That very property of electron in vacuum an flourascent material coating gave is television. Then comes the color TV using three electron guns, and then high definition paper thing LED type. Soon we will have true 3D halogram projection to watch television with a totally different prospect.
Now, coming to your experiment, I have watched several of yours I don't see a proven fact: Such as Gravity and its definition? The most important thing is the unified field theory. There is only one force in the universe; that we need to find out. How? Well, Gravity is one, Magnetism is second, Electric is third, and weak and strong force of attraction and repulsion of electron is fourth. Now scientist found out that Magnet and Electric forces are interchangeable: meaning electric makes magnetic force and magnet makes electrical forces: that reduced to o ne as Electro-Magnetic force. Then we had witnessed the Z-particle spin in the atomic structure, beginning of quantum theory, and we figured out that Nuclear force is nothing but electro-magnitism. A Noble Prize was awarded to three scientists in proving that. Now we have identified two forces, Electro-Nucleo_magnetic force, and second is Gravity force. How did we do it? BY finding the properties that these three forces interchange each other. Now four forces have been reduced to two. The million dollars question is how to find out if Gravity and Electro_Nucleo_Magnetic force can be arrange to form a Gravitic force or vice versa. There has to be a THEORY and PRINCIPLE. You don't have either. Someone showed a flying graviflyer does not mean anything because there has been no such evidences yet that gravitic force is an off-shoot of the other force (it must be but not discovered yet). So you are assuming a lot of things here in these experiment. One of your assumption is to create electromagnetic force in a toroidal form, just like the gravitic force around the Earth or any other satellite out in the space. So far we have seen how atmosphere ATMOSPHERE gives a lift when stream of electromagnetic radiation shoots in the atmosphere; See Tim Ventura's lifter. NASA also has been working on Ionization thrust but to no avail. The bottom line is this that you are assuming some effects without proper and pragmatic reasoning. You can arrange capacitors, inductors, magnetic in one million different ways and one of the set up may produce ANTI-GRAVITIC FORCE. We don't know what gravitic force is; just as we did not know what magnetic force was. One thing to notice, when a magnetic is moved in a coil it causes magnetic flux to influence the coil and if it is a closed loop the electric current flows through the coil. There are no additional electron entring the system and as long as the magnet is moving, the current flows through the load, neither the wire nor the magnet looses its weight or quantity? So whatever electrons are within the closed loop are producing the power proportional to the movement of magnet and mass of the coil? Think about it.I would like to see your response. I am a scientist and this is the longest comment I wrote after my five pages thesis five years ago on the same subject.
Thank you for sharing your work. I do admire it and by no means discouraging you. Please continue your march.
I had an outline given by the creator of this device. The problem is that it is not showing that it works this way. I am not doing random tests. I am following the fields to find common spots where they can tell me something. I have a working theory on how it works. I will write it in detail and post it this week.
The biggest problem I have is that the test for what I want to know directly has not been discovered yet. I have to invent it to even find out if I am close to achieving it.
@@nathanbunten4299 Thanks for your reply. When I watch your videos I do not see a principle behind each variations you performed. The hv hf emitting from Tesla coil has to be in resonance. Tesla is nothing but a great magic of resonance. When an electromagnetic wave generator resonates at its resonance frequency the electromagnetic properties or induction transfer diminishes and transforms completely into magnetic flux field that behves differently than electromagnetic field which is perpendicular to each other. To maximize the magnetic flux field the current and voltage must be in phase for max effect, and that is only possible when the system is in resonance. Even if your Tesla Coil radiating electromagnetic field must be in resonance and then when you bend the field with the spinning disc it might affect the gravitic force. It is something not too complex but it seems so. Good luck. Thanks for your reply.