This video from The Seat Shop will show you how to remove a 3rd row seat that is stuck in the vehicle. If you have any questions, please give us a call at 214-710-2565. Thanks.
OMG!!! I have been putting up with this for the past year. Today I went to pick up something and it wouldn't fit because I couldn't get that seat down. I said enough is enough. I was getting ready to take it to my mechanic and then I came across this video. It totally worked. It's as good as new now. I"m not even that great with tools, I'm a computer guy but I was able to do this and put it all back together in about an hour. I can't say thanks enough to you guys!!!!!!
I have an '07 Tahoe and the rear passenger side seat has been stuck in the up position for the past few years. I've been online searching for a fix about 10 times, leaving me frustrated and still with the stuck seat. After I watched your video, I had it out within 10-15 minutes - you're a lifesaver and just wanted to thank you again for posting.
Thank you so much for your patience while making this how to video. After your video, everything you said and alluded to was accurate. I will say this, make sure the small lever that is being pushed down under the plastic cover has the small spring attached on BOTH ends. In my instance, the hook that attaches to both ends of the spring had become detached on one end. Thus the lever needed to fold the seat down would not engage.
Great video. Was planning on taking the other seat apart to see where the actuators were. You saved me a ton of time and headache. Spent more time getting the plastic hinge covers off than fixing it. Wish there had been something about those.
Awesome video dude! You just saved me roughly $600. My local Chevy Dealership quoted me $600 just to take 1/2 of the 3rd Row Seat Out (the 1/2 that wouldn't fold down). After today I said enough was enough, I sharpened my knife and got the hammers ready because I was about to hammer that SOB out of there rather than pay $600. I came across your video and after about an hour and a half I had the seat out. I bet I could grease it up to fix the issue and get it put back together and even sell it now. You could have just made me money! Ha Ha Ha. Thank you so much for the video dude.
Thanks for getting me on the right track. I did what said but the seat still wouldn't fold. The folding latched was jammed in the downward position and no matter how hard I pulled up on it, it wouldn't budge. That's I got frustrated, took a knife and cut the other covering off the folding latch side. I saw the bolt thing was inside or a curved groove. Took my screw driver and manually tried to push it, wouldn't give a inch. Took my flash light and saw a crevices where that bolt looking thing was connected to. Took a flat head screw driver and placed it on the bolt thing that the latch controls, took a hammer and gave it a tap and BAM, the seat folded instantly. I fill like such a man now. Lol. (For those who are lost, tried explain it the best way I could. Had to b there).
Thank you Jamal Jamal!! Your info worked!!! I didn't cut the covering but I pulled the plastic apart as far as I could get it, used the flash light to find the bolt looking thing, hit it with the screwdriver/hammer, and IT WORKED!!!!!! It had been stuck for months! Thank you!
Thank you very much for this video, it was alot more helpful and easier than any other explanation out there. My cable came out of place and stretched, got a new one ordered. Thanks again you guys are awesome. AAAAA+++++
One of the 3rd row seats in my 2009 Tahoe LS won't latch.. The front goes into place and when I let the back of seat down the latch won't latch...After further inspection I now see the rear latch on both sides are closed and will not open so when I drop seat to latch into groove it won't latch because the latch is already in closed position.... I've tried WD-40 and prying them open with no luck... Any help/suggestions would be greatly appreciated! Thanks for your time.
We are having this exact problem, but our Tahoe is an 06. Will this work for ours? I need to go pick up a new treadmill, and now the seat suddenly doesn't want to fold down, it worked fine until now. So frustrating.
Hi Ariana, Please consider clicking the links below for the other videos that can help you. Let us know if you have additional questions. ruclips.net/video/j1Pj6k54Jsw/видео.html ruclips.net/video/Tx3a9MFlZ1o/видео.html
Hi you can try any of these other videos to see if they help. - ruclips.net/video/Tx3a9MFlZ1o/видео.html and you can try this as well - ruclips.net/video/j1Pj6k54Jsw/видео.html
i was given a used set 3rd row. only because the handle the pulls the seat completely out is broken. Q's: is there a site where i can purchase seat parts from that you might recommend me. anything ia appreciated. thanks
Hey Lindsey! Unfortunately, we are just a manufacturer of replacement leather seat covers for Trucks and SUV's. I don't have any seat here for the Villager :/. Sorry about that!
Hello, unfortunately, we have not finished our R&D on the Mazda as of yet, we would suggest taking it to an upholstery shop to see if they can try and help you out. If you would like to use one of the shops in our network please use this link and search with your zip-code - www.theseatshop.com/resources/install-locator/
@@chefd9002 most likely there is something in the bracket like a coin or something that is blocking the bracket channel, you can also try this video which is more in depth of how they work, let us know if this helps - ruclips.net/video/Tx3a9MFlZ1o/видео.html
Thanks for the questions, try watching this video explanation at 4:56 on this video it should be time-stamped already but just in case - ruclips.net/video/Tx3a9MFlZ1o/видео.html
OMG!!! I have been putting up with this for the past year. Today I went to pick up something and it wouldn't fit because I couldn't get that seat down. I said enough is enough. I was getting ready to take it to my mechanic and then I came across this video. It totally worked. It's as good as new now. I"m not even that great with tools, I'm a computer guy but I was able to do this and put it all back together in about an hour. I can't say thanks enough to you guys!!!!!!
I have an '07 Tahoe and the rear passenger side seat has been stuck in the up position for the past few years. I've been online searching for a fix about 10 times, leaving me frustrated and still with the stuck seat. After I watched your video, I had it out within 10-15 minutes - you're a lifesaver and just wanted to thank you again for posting.
Thank you so much for your patience while making this how to video. After your video, everything you said and alluded to was accurate. I will say this, make sure the small lever that is being pushed down under the plastic cover has the small spring attached on BOTH ends. In my instance, the hook that attaches to both ends of the spring had become detached on one end. Thus the lever needed to fold the seat down would not engage.
First video I found that could help me get my stuck seat out. Thank you
Happy to help!
Great video. Was planning on taking the other seat apart to see where the actuators were. You saved me a ton of time and headache. Spent more time getting the plastic hinge covers off than fixing it. Wish there had been something about those.
Awesome video dude! You just saved me roughly $600. My local Chevy Dealership quoted me $600 just to take 1/2 of the 3rd Row Seat Out (the 1/2 that wouldn't fold down). After today I said enough was enough, I sharpened my knife and got the hammers ready because I was about to hammer that SOB out of there rather than pay $600. I came across your video and after about an hour and a half I had the seat out. I bet I could grease it up to fix the issue and get it put back together and even sell it now. You could have just made me money! Ha Ha Ha. Thank you so much for the video dude.
You are the man!! Thank you. Helped me with the '08 Yukon I recently purchased.
You're welcome, glad we could help out!
I have an 07 tahoe and this video totally helped me. All it was was the pin that folds down was jammed. Love you guys !!! Thanks.
Thanks for getting me on the right track. I did what said but the seat still wouldn't fold. The folding latched was jammed in the downward position and no matter how hard I pulled up on it, it wouldn't budge. That's I got frustrated, took a knife and cut the other covering off the folding latch side. I saw the bolt thing was inside or a curved groove. Took my screw driver and manually tried to push it, wouldn't give a inch. Took my flash light and saw a crevices where that bolt looking thing was connected to. Took a flat head screw driver and placed it on the bolt thing that the latch controls, took a hammer and gave it a tap and BAM, the seat folded instantly. I fill like such a man now. Lol. (For those who are lost, tried explain it the best way I could. Had to b there).
Thank you Jamal Jamal!! Your info worked!!! I didn't cut the covering but I pulled the plastic apart as far as I could get it, used the flash light to find the bolt looking thing, hit it with the screwdriver/hammer, and IT WORKED!!!!!! It had been stuck for months! Thank you!
Thank you so much. After hours of frustration I watched your video and I fixed it :)
+Renee Reyes Absolutely! No problem!
Got my seat fixed .... Thank u so much bro appreciated
Thank you! Had a stuck seat on ‘13 Yukon. Finally out! And great beard 👍🏼😁
Thank you sooooo much, after a yr of thinking of what it could be, we fixed the problem!!!! GREATLY APPRICIATRED!!!!
Thank you very much for this video, it was alot more helpful and easier than any other explanation out there. My cable came out of place and stretched, got a new one ordered. Thanks again you guys are awesome. AAAAA+++++
Got my seat fixed. Thanks for the video!
No problem!
09 suburban and this is the best place to find my problem fixed
This helped a lot thanks for making this.
Fantastic Video, best one out there. Thanks!
THANK YOU THANK YOU THANK YOU!
Great video, thank you very much!!!!!
gonna give this a shot. think my problem is the aftermarket plastic mats that I bought from the gm store causing some kind of interference.
Paul. That sometimes happens. You could simple cut those mats to fit around the mounts for your third row. Just a thought. Thanks for watching.
One of the 3rd row seats in my 2009 Tahoe LS won't latch.. The front goes into place and when I let the back of seat down the latch won't latch...After further inspection I now see the rear latch on both sides are closed and will not open so when I drop seat to latch into groove it won't latch because the latch is already in closed position.... I've tried WD-40 and prying them open with no luck... Any help/suggestions would be greatly appreciated! Thanks for your time.
We are having this exact problem, but our Tahoe is an 06. Will this work for ours? I need to go pick up a new treadmill, and now the seat suddenly doesn't want to fold down, it worked fine until now. So frustrating.
I'm removing 3rd row seats from 2016 explorer; removed 4 bolts under neath seats; what else do I have to take loose?
Have a Ford 2003 EXCURSION middle roll sit is stuck please help, one hot big 🐻
What if your seat won’t come back up? What can you do in that situation. I have a 2007 suburban and the third row seat won’t come back up at all now.
Hi Ariana,
Please consider clicking the links below for the other videos that can help you. Let us know if you have additional questions.
ruclips.net/video/j1Pj6k54Jsw/видео.html
ruclips.net/video/Tx3a9MFlZ1o/видео.html
I am unable to even remove the seat and its in the down position same problem in both my 2014"s ! Any suggestions
Hi you can try any of these other videos to see if they help. - ruclips.net/video/Tx3a9MFlZ1o/видео.html and you can try this as well - ruclips.net/video/j1Pj6k54Jsw/видео.html
What I need is to get my seat totally out ! It’s been stuck for months
You can try this other video to see if it might help you out - ruclips.net/video/Tx3a9MFlZ1o/видео.html
i was given a used set 3rd row. only because the handle the pulls the seat completely out is broken. Q's: is there a site where i can purchase seat parts from that you might recommend me. anything ia appreciated. thanks
Check a company called LKQ. We order seats and parts from them all the time. Thanks!
TheSeatShop thanks. really appreciate it.
I have a 1999 Mercury Villager and I can not remove my seats. They fold down but won't unlatch and come out. Can you trouble shoot for me?
Hey Lindsey! Unfortunately, we are just a manufacturer of replacement leather seat covers for Trucks and SUV's. I don't have any seat here for the Villager :/. Sorry about that!
What about that second lever that flips the whole seat up that's what I'm having problems with mine won't budge
Thanks for reaching out, try this other video we have explaining the 2nd lever - ruclips.net/video/Tx3a9MFlZ1o/видео.html
Have a 2000 Suburban with a third row bench seat. Have tried absolutely everything!!! Nothing is working.
Hey LC Bacon the 2000 Suburban is a totally different seat, please give us a call and ask for Brian 214-710-2565
Hi All, I have Mazda cx9 2008, and its third raw seats do NOT fold dawn in order to get more trunk space, so how can I fix it?
Hello, unfortunately, we have not finished our R&D on the Mazda as of yet, we would suggest taking it to an upholstery shop to see if they can try and help you out. If you would like to use one of the shops in our network please use this link and search with your zip-code - www.theseatshop.com/resources/install-locator/
what if you are trying to remove it entirely from the truck but it is stuck
So there are some year ranges where you cannot remove the seat, what Year/Make/Model are you trying to remove the 3rd-row seats from?
@@TheSeatShop 07 Chevy Tahoe. The other one came out, but the lever to take it out is stuck
@@chefd9002 most likely there is something in the bracket like a coin or something that is blocking the bracket channel, you can also try this video which is more in depth of how they work, let us know if this helps - ruclips.net/video/Tx3a9MFlZ1o/видео.html
my corolla 2015. xli no have rear seat folding option so any idea ?
Mines jus don’t stay up.....Could this be the same problem????
Thanks for the questions, try watching this video explanation at 4:56 on this video it should be time-stamped already but just in case - ruclips.net/video/Tx3a9MFlZ1o/видео.html