M&P9 2.0 How to disassemble, reassemble, and function test.
HTML-код
- Опубликовано: 9 сен 2024
- Simple step by step procedures to walk you through how to disassemble and reassemble your M&P 2.0 pistol.
Enjoy! Hope it helps.
Please like share and subscribe!
Version as shown:
alnk.to/fawKlYk
sweet version of it.
alnk.to/4fKTxxn
Link to pick up grease.
amzn.to/2xrPuw9
link for a cool laser cartridge:
amzn.to/2G8fBw0
and the target for it:
amzn.to/3hWMqJU
a simple cleaning kit
amzn.to/35A1mKU
Thanks. Short, no-nonsense and to the point. Bonus, no stupid music or extended intros. Need more content like this!
Thank you!
Simple and effective. That’s what I was looking for. Thank you.
Happy to help! Please subscribe!
I have the exact same pistol, I avoided getting Covid19, finally got both my shots, I've got some ammo and headed out to shoot my 2.0 on Saturday, first time shooting it this year .. it's now June 2021..life is good..
Enjoy! It's a fun gun!
Absolutely brilliant video. To the point, concise, easy to understand, and simple! Thank you!
You're welcome! Please consider subscribing!
I was struggling after watching another video looking for take down lever like it said in the video and couldn’t take this gun apart. I had to rest hands because of my arthritis. After watching your video. I had it apart in seconds. I wish I found this video first ❤. It is so simple and easy to follow.
Wonderful!!!! I'm happy it helped!!
thanks man, bought my mp9 firearm about 2 months ago. i really appreciate the video! excuse me, i have homework to do!🤗
Wow, thank you. I just bought my first handgun. Same gun in this video, just a 4.25" barrel. After watching your video, I just went from being absolutely clueless and timid about disassembly. To sitting here timing myself dropping the mag, removing the slide, reinstalling the slide, resetting the action, and reinstalling the mag. Too simple.
The other day I just purchased two 9mm M2.0's in the 4.25 barrel length. Love my Glocks, but the grip and steel magazines plus $397 per gun was attractive! Also like that I have 17+1 capacity in the same general size of my Glock 19's.
I got the .40 cal 💪🏼 awesome Gun thanks for sharing
Just got the compact model recently, My first pistol thanks for the video helped me out quite a bunch.
Great!! Happy I could help. The 2.0 is currently my favorite pistol, I have a few of them, so you will see them on my channel quite often!
Thank you again for helping me out. Had to refer back to your video to disassemble and clean.
Absolutely! Happy to help!
Thanks so much!!! Right to the point I love it
Thanks!!!
This is a great tutorial! A little different from other videos I've seen. I noticed you did not use the pick from the grip to reach in the chamber and flip the takedown pin. Nice to see it can be done without "picking around" inside the chamber.
I have the version without the thumb safety, and this may have something to do with it
Nope, works on both.
Great tutorial! Appreciate the time you took to make it.
Great instructional video! Very simple, concise, and to the point. Thanks for posting!
just commenting to help the algorithm
YES. Thanks for this to the point video. Subscription earned!
Short and simple. Thank you!
I noticed comments about Grease. I use Rig universal in the white little container.Its kinda hard to find.I use a toothpick to apply. Mainly used on expensive golf clubs.
Yeah I use Tw-25 and an acid brush to apply. Definitely prefer a quality grease to oil.
Helpful!
Thank you, great video, very helpful
Happy it helped! Thanks for watching, please consider subscribing!
in the manual it says to verify that the sear deactivation lever is lowered prior to putting the slide back on, what's the reason for this?
Don't know, I never do it.
Perfect
I try.
Thank you
So there is a metal arm like piece inside of your m&p just below the chamber that you can pull out keeping you from having to pull the trigger to release the slide its actually better on your firearm dry firing it is never good
There is nothing wrong with dry firing modern guns.
It is a normal part of the maintenance that is conducted on almost every gun in the military.
Very helpful
Thank you so much
You're welcome!
thanks mate
is that a modular frame? can i change the frame like Sig M18?
Technically yes, but it is way harder than the M18.
Hey quick question - just got this pistol and my slide at the front moves laterally side to side a bit. When I am holding the grip and I shake the gun back and forth, there is an audible rattling noise. I have heard other people with this same issue and am curious if it happens on yours as well
No mine does not
beautiful gun.. I wish SW uses the new Shield Plus trigger on MP9 series.
Well apparently your wish is their command! They have changed all the triggers
@@3KindsOfGuns oh wow.. that is super nice. SW made a huge home run.
I still prefer the original trigger, but the Apex trigger is phenomenal!
I have a 40 cal version without a safety. Can a safety be added like the 9mm shown in the video?
I don't believe your grip has the space for a safety. But I could be wrong. Why do you want to add the safety? I have removed it from all of mine.
@@3KindsOfGuns Because if I ever get into a confrontation and someone gets my gun if the safety is on it may give me the time to get the gun back and take control of the situation. It is said that one of the reasons for police to get shot when wrestling with a criminal is the criminal gets their gun and if no safety the police officer gets shot by his own gun.
I would recommend training weapons retention, as opposed to trusting the bad guy doesn't know how to use a safety.
@@3KindsOfGuns That is a good recommendation. I know this issue about whether to have a safety or not has positives and negatives. Massad Ayoob on his channel favors a safety and shows studies to support his argument. The gentleman on the Warrior Poet Society channel favors not having a safety. I think both are valid points. It is up the the gun owner to choose.
And he just said that red dots and wmls were dumb.....
What if your mp9 2.0 full dose not have a safety
Same, just minus the safety steps
Hello, curious what type of grease is it that you use?
Tw-25
amzn.to/2xrPuw9
how do you get the slide to release after cocking it? Mine gets stuck and stays open. thanks
I don't understand your question. At what point is it getting stuck?
Do you have the magazine in? If so you will have to pull back the slide while pushing down the slide release.
If you are referring to doing it with an empty magazine in, it's going to lock to the rear, by design.
Why do you have to rack the slide while holding the trigger??
It verifies that your disconnectors and sear are working properly.
What does the button right next to the slide release button do?
Are you referring to the area forward of the slide catch/slide release?
@@3KindsOfGuns Yeah, is that just a part of it?
It's a piece designed to make the slide catch release when you slam a mag in.
And it doesn’t mess up the firing pin?
Nope.
How do you reassemble the lower parts
I will do a video on that in a few months. Unfortunately, duty has taken me away from my tools for a while.
I don't hav a safety tab on the back like that😮
Yup, the firearm is available with or without the manual safety.
1st time gun owner, and I just bought a 4" barrel compact version of this handgun. Haven't fired it yet. I practiced disassembling and reassembling per the instructions, and have a really hard time pulling off the first inch or pulling on the last inch of the slide from the frame. I'm not sure what's causing it. I removed the barrel and spring, and the slide is so much easier to pull off and on, although there is still slight resistance in that 1 inch at the rear of the frame/slide. I don't have cleaning tools yet, but I did add a drop of oil to each lube point per instructions, but it didn't seem to help. I'm pretty sure the barrel and spring is seated correctly. I think I'll have to take it to the store and see if they can look at it.
Yup that sounds odd. Sorry I can't really recommend anything without seeing it. let us know what happens!
@@3KindsOfGuns I took it back to the gun store, and the staff said he thought the slide being hard to remove and install is a common problem with the M&P. He said it should get better after I start using the gun. Guess I'll just see what happens after shooting it a while. If it still bothers me, I'll contact S&W customer support.
How did it go?
Don't use grease guys. That's way overkill and a place for stuff to collect and maybe cause a problem. Cleaning and lubrication are way overdone these days, in fact carbon is a natural lubricant itself. I'm not saying don't clean, just that a totally uncleaned gun would run longer if put to the test than one with grease in it.
This has been disproven by the US Army.
And the grease that I'm using isn't bearing grease.
1. don't pull the trigger when taking apart the gun, unnecessary on this model. 2. don't press down on the slide lock after pulling the takedown lever or your slide COULD go flying. Instead, close the slide manually by racking. 3. Not sure where you learned to 'clear' firearms but that scared me. REALLY.
Hey first time gun owner hear I just took apart my m&p by pulling the trigger is this gonna ruin my gun for good?
@@henrydenry9508 no, you can press the trigger, or use the little piece on the inside. As you saw, I verified the gun was clear, so pressing the trigger is a none issue.
You absolutely can press the trigger, or use the bar on the inside. Either works, you'll notice that I didn't let the slide slam forward, but used my hand to keep it from slamming forward.
I don't know what about how I cleared it scared you.
I'm an active duty firearms instructor, and have been for a while.
I'm a new gun owner...
If you guys don't mind can anyone recommend me a good gun cleaning I have a Smith & Wesson 2.0 9mm.
Thank you
Also great vid.
All you really need is a decent bore brush, a toothbrush, and some grease, I like tw-25.
All can be found on amazon.
I added a link in the description for a cheap cleaning kit. I also recommend using the link to pick up the tw-25 as well. Thanks for watching!
@@3KindsOfGuns really appreciate the response thank you!
@@R.aza21 no problem, please consider subscribing for more!
@@3KindsOfGuns of course you made me learn something new man. Your video taught me how to take apart my weapon.
I've been having my firearm since the beginning of September so I wanted to do some checking
And now I'm taking your advice on the gun cleaning kit!
I got to keep my weapon clean really thank you so much!
Thanks for the excellent tutorial.
thank you