Jeep Cherokee 4 0L Thermostat Tips and Tricks
HTML-код
- Опубликовано: 21 окт 2024
- Heres a link to that gasket maker I used as an adhesive → amzn.to/28Znttw
What was that song? Here it is at the 18:14 mark of this mix. Get it free here → / le-belle-mixtape-summer
Get an “Alexa” voice controlled assitant/radio thingy here → amzn.to/28LusbC
Connect with me socially on these social media spaces
Facebook → / briansmobile1
Instagram → / briansmobile1
Twitter → / briansmobile1
BEME → briansmobile1
Who's the BOSS? Get'em to donate here! It's tax deductible! These folks help
kids like my daughter to stop having seizures so they can develop properly!
Glut1 Foundation → www.g1dfoundati...
Drop me a postcard or send me a license plate from where you are!
briansmobile1
P.O. Box 282
Cedar Valley, UT
84013
Jeep Cherokee 4 0L Thermostat Tips and Tricks
Best 4.0L thermostat replacement video on RUclips, no contest.
Unfortunately, the ZJ belt makes it harder than the XJs, but everything else is the same.
You said to mount the sticky side of the gasket to the engine block, then you proceeded to mount the sticky side of the gasket to the removable housing. Which is it?
drilling the thermostat is great on older vehicles
man I am glad I have California plates does Illinois plates really kill the gas mileage...
beautiful skiing thanks for a great video
Ha ha!
I just did mine the other day on my Cherokee. Another tip is make sure you torque it down correctly! I cannot recall the torque but it's somewhere around 17ft/lb. Alternate tightening of the two bolts or else you will crack the waterneck.
Hello.... I have been driving jeeps for the longest and I wouldn’t trade this model, the motors are great . I have a 1997 Jeep Cherokee, I believe I’m the second owner and it’s at 280,000 miles and it’s still running pretty good. 🙃Regarding your license plate are you considering having one from Puerto Rico 🇵🇷 we are not a state but we are territory of America and we are Americans... let me know... thank you for your videos.
Easy sand, the whole area down then put the gasket, then tighten. It will seal perfectly. Do not use no sealer.
Great tips and great bonus footage too! You really know how to enjoy life!
That is the biggest hole you should ever do ? So what size is it ? 1/8--1/16 ?
As usual great video content and great attitude there young man. And, Brian, we know you got here because of a great family supporting you. And on top of all that we get to see great BFATE of you going down hill and then going back up for another try downhill again. Good Ski Viking this time I guess we'll get more Sky Viking on your next production - toot your horns of plenty.
you're an awesome dude brian. thanks for takin us along on the slopes. wicked cool. rock on man.
My pleasure! I love to share what I love. It makes it even better.
use a rubber band to hold the thermostat in the housing then cut when done
Thanks for the tip!
I couldn't tell if you had one from Colorado or not very nice video very well detailed I'm an ASE Master certified automotive technician you showed the exact way I put those together and that is how I teach all of my up-and-coming technicians we have to share the wealth and we have to learn something new everyday otherwise and we're just one of The walking Dead like the rest of the world out there thank you.
I do not put stickers on my car but.......Your you tube channel played a big part in saving the riverrat.I would display it proudly.
That application gun is awesome//such control of bead width
Hey, can I ask where you ski at? Are you using blades? Man, I really want to go skiing especially seeing as how you make it look so easy. Take it easy.
I sure enjoyed the drill a hole trick, makes sense. Great footage of the slope. It must be hard to go back to work after a day like that.
It actually makes it more bearable to function at life. I'm in such a good mood by the time I come back to town that I can put up with pretty much anything.
That skiing look so fun! And so does the flying! I want to do those things so bad.
Thanks. Me too!
How big is the hole supposed to be? i think i did a 1/16 in hole anyway i enjoy your videos your the man thanks.
Hey. Thanks for the video. I actually saw this video some time ago and somehow remembered that someone somewhere at some point ..... had said to drill a little hole in the top of the thermostat if the new one doesn't have a hole. I just said "a hole " in reference to a gas hole. Anyway, it worked in my 4.0 xj recently and I happened to just stumble upon the video at HEY, it was You. Thanks for real. I also just got my antique forever licence plate (1998 model) so Ii have a Mississippi tag for you! Where do I send it (if you still want one)
Thanks Brian. I installed a new tstat and housing and the damn Jeep hasn't gotten to operating temperature since. It runs rich so not only is it guzzling gas but its probably fouling up my spark plugs! Greetings from New England
WHAT SIZE DRILL DID YOU USE BRIAN LET ME KNOW THANKS
Awesome bfate. You're such a genuine dude. Great channel!
Thanks Nick!
+briansmobile1 keep being a humble intelligent dude. The world needs more of you 👍
Wish I'd seen this first, my thermostat dropped like youd mentioned and it leaked, like you mentioned and didn't realize it because of the thermostat and gave it an extra tighten and broke the top bolt off in the motor
Brian, where oh where are you skiing in this video ???????????? Awesome ride. By the way good Jeep Video. Thanks.
Jack up the front axle a few inches instead of spilling the antifreeze.
Why does a jeep or any vehicle in 4 wheel drive feel like its broken on the front end when you turn?
👍⛷bonus footage rocks. I like to ski and you showing how you ski. I still have to wait 5 months for snow. You still have a snow in Utah?
There's no skiing left here unless you caught it on film or hike into a patch in a wilderness area. I'm still waiting for the snow to melt off Bomber Peaks West face so I can finally do my B-25 crash video.
Love your videos! I'm from Illinois and the newer plates are a lot lighter now. But cost more to have them.
The video I needed today.
Glad it helped!
Nice Video !great tip on the thermostat ! in process of doing waterpump and thermostat now !!
Thanks for all the great advice Brian
Welcome
You give me hope that I may be able to fix our new car one day. I've fixed my own vehicles since I got my first car back in 1986. I had to remove the engine cover to check power steering fluid the other day. WTFiddlesticks? Stoopid cars...
Awesome! What's an "engine cover?" Don't you mean idiot hood? The plastic hood the idiots require to fool other idiots that there aren't any moving parts or wires?
You're such a lucky guy to be living where you are..and making the most of it. Love your videos.
And yes, I am jelly .;)
love your videos buddy. I wonder how your videos will look if you make them 360 or 3D I'm sure they would look great as if your fan is actually there with you.
From Kevin in Colorado , new fuel pump installed by a shop ,when running the pump has a high octave whining sound any comment will help
More jeep videos! Is this the jeep that your going to be doing rebuild you mentioned in your connecting rod video?
Those built Jeeps are high budget. This one is a git'r done high school rig. I need to follow up with Kevin on that one. Thanks for the reminder!
I’ve got an “01” grand Cherokee; would you recommend drilling the same hole for that thermostat as well?
Yes
Nice video. I loved the skiing part as well!
Thanks Mike!
(Brian with the super over enthused voice ready to conquer this dang thing!) "Welcome to wild card Wednesday, i'm here with Hayden Hale say What! Hayden: (In a very underwhelming and a dull glaring voice directed at Brian for not letting him have his morning coffee before he made him apart of his catchy beginning hook) what.. LOOOL
Hayden's a stud. Good kid then and a good man now.
I very much enjoy your channel. Thank you for the knowlege
Welcome- that's a HUGE FISH John!
Do you have a Rhode Island license plate?? I have my old one that i will part with....lmk
I am just looking at getting a 1989 cherokee with 400000kms on it , going to use to plow snow.
One of these threads someone said the torque for those bolts is 15 ft/lb. Do they go into the water jacket, or are they blind holes?
Edit: This says 13 Ft/lbs www.torkspec.com/torkspecme.aspx?KI=69-4.0L-242ci-S6
Hi BriasMobile1.....greetings from Caracas/Venezuela.....this kind of tips/tricks is what I was looking for.....I own the same car here and I need to re-install the thermostat. You have hit 2 special points : the "necessary hole valve" and the "fall issue" at the moment to seat the thermostat.
BTW, it is sufficient opening only 1 hole to the thermostat ???
Thanks again....
Saludos....
If you are in HOT Weather, you can By-Pass it and SAVE $$$$... I have Video in my Channel and Test Video too, check it out. It might be useful to you :D
Hey I wanna thankyou for the EZPZ tutorial for this, my jeep thanks you, most of all! My wallet thanks you.
On these w/out jiggle pins, I'd instead drill "two" micro-sized (½ size of original presumed hole) holes on opposite ends for better/even area coverage🤔👌 "ya know how they do computer processors; cut the speed but double the cores, efficiency maybe?😉"
If you buy a good Thermostat and not after market, they have a Rubber Seal / Gasket in them already.
Always good to buy a fail safe thermostat.....so when it breaks...it breaks in the open position....
@@sojourn1544 agree. How do you know which type you get. How can you tell from one to ano? Thx
That’s fresh brands new CAMOUFLAGE duck tape 🤣😂
Beautiful shots skiing. I haven't gone in a while! I have at least one super special plate coming to you pretty soon! Not American!
hhuuiïjo
just think about how much Salt they use here in Illinois in the winter time..it's the only way these plates can hold up as much they use..I'm just a few miles away from him.
It needs to be bulletproof ; )
Hey Brian. I don't see a New Hampshire on your list. I have one I can send you. Not sure how?
You have South Carolina on both of your lists. You can remove it from the "need" list.
Thanks Erik! Georgia too!
Briansmobile bumper sticker would be awesome.
Pronunciation of Adams surname will be like - Tzabay. Originally there's a J at the end.
A subscriber from PL :-)
I may have to send you a Michigan one. They are light
Thank you!
Do you have any New Jersey tags? I am right on the Delaware boarder in NJ, I could probably obtain a DE or MD tag for you, and yes, legally lol.
I have New Jersey from when I lived in Maple Shade, NJ. I don't have any of the others on that left list though. THAT WOULD BE AWESOME!
In Delaware and I think Maryland the tags go with the car, in NJ they go with the person. Next time I'm in a junk yard in Delaware or Maryland I'll look for some for you.
saw the firebull hat on top from hush i wearing mine right now lol
Can I pass the air through the left upper antifreeze tube? Mine is an 04.in line 6 do I need the hole in the the thermostat?
Do you collect license plates, Brian? I'm from Nova Scotia, Canada and I'm sure I have one or two laying around. Have a Quebec one but I don't want to part with it and you have one anyway ;)
Also...I probably wouldn't put a sticker on my car but I'd certainly put one on my toolbox at work.
I would LOVE a Nova Scotia tag! Make sure to have a return address.
Will do. Where do I send the plate?
Hey Mr. Brian! wheres those BMob hoodies?!?! I want 2!
Did this earlier and fucked it all up 😂🤝 I’ll be sure to use your tips
Are you missing FL? I may have one I can send your way
I need to dig, but I am pretty sure I have a New York plate I can send to you!
another awesome video keep it up
Illinois has new plates now
LOL you were still missing Colorado from your list, I'll have to send you one of my old sets
Me too, but 32 plus 18 is 50 and I counted. How can it be? Ahh, he must have same one in both lists somewhere. Was only looking for colorado and not repeats.
Fifty nifty United States from 13 original colonies..... Thanks!
94 cherokee country running without the tstat. well ya know, don't get too cold in virginia!
The Québec license is from me. My name is Gabriel Nadeau from Brossard. I saw confusion and an star on the bord🤔. haha. I hope to receive your pliers. keep up your good job. -Gab
THANK YOU! The star means it's outside the US. (bonus awesome hence the star) I sent the push pin pliers out about four days ago. Hopefully you'll get them this week if customs goes well. : )
I received yesterday. Thank you very much , it will help me for sure. Wait to see your next video.
I have a jeep grand cheroke 97.ing 5.2 do I need to do the hole on termostat?
Removing the fan shroud will make it a little bit easier as well
Thanks
How tight do you tighten the bolts?
Thanks for that skiing footage at the end! Very cool-
I never went skiing before, now I am too old, but I sure feel like I have gone. Thanks.
Glad to share!
I need change my thermshat its lazy.
If at first glance you have to take half the engine apart to change the thermo what advice do you have, hints and tips for buried thermo housings.
I use the loctite stuff which works well as its a anaerobic setting compound so that which squeezes get diluted.
Utah is just a lightweight lol
If you buy a good Thermostat and not after market, they have the Hole and a Rubber Seal / Gasket in them already.
You could always buy a mityvac siphon there 35 bucks
Not one mention of the hole size, or did I miss something?
nice video... im watching fro Mexico
You should never use rtv gasket on anything water, water pump or thermostat if ya ain’t steady enuf or don’t have enuf patience you shouldn’t be doing it anyways rtv will ruin your radiator little pieces will squeeze out and go through the block to radiator and clog it up. Kinda the whole reason for a gasket shouldn’t use gasket maker if it comes with one
I hear you. If you're using it as an adhesive or sealant (sparingly) you won't have it stray. Good point to make, but with the P.R.S. it sticks like hell and it's tough. It's not going anywhere. I'm just getting good at this. Just over 30 years of experience/success doing it this way with this product. I just wish it wasn't so dang expensive now.
Woaaah you crazy viking, thats cool, man! :)
Thanks! = : )
What do you use so it dont move
Couldn’t the same thing he accomplished by using petroleum jelly to hold the thermostat in place? I feel like silicone would be a PITA to clean
what thermostat did you use?
Great Vid!
Which Permatex product?
Get a MD plate yet?
What size hole do i drill into the thermostat? Drill bit size?
3/16" or less
@@briansmobile1 i appreciate the reply back. I actually got the vehicle all back together two days ago. The thermostat had a vent hole already in it. It's running great.
Man you rock!
Thank you for real
I'll send ya an Oregon one
Well I already know what kind of sticker LOL Cheers buddy...
Thanks Steve!
Like that tip!! Thanks!!
Holy smokes, that's talent on the skis!!!!
I have a Vermont plate
Hey Brian. Got a (possible) challenge for you'all. Check your buddy's 2000 Jeep XJ 4.0 cuz he might have what appears to be a minor rear main seal leak (most 4.0's do), but in fact it could be coming from the oil filter adapter "o" rings. Fun part? I believe on '97-'01 XJ's, Jeep used a T60 torx bolt to secure the adapter to the engine block and the passenger side motor mount is in the way. So if you know of, or can figure out a Tip & Trick, that'd be awesome!
Great videos btw - thanks!
Did you ever figure out what to do to get to get the oil filter adapter out with the T60 torx?
Awesome!
Mechanics love working in dirty, rusty engine compartments. Shiny red paint doesn't help keep a car running.
I'll give u mass and Maine tags and ri if u don't have I'm a mechanic in mass right now
Warning. I did it this way and the gadget maker squished out into the thermostat and stopped it from opening, causing my Jeep to overheat!
How do I send you a tag? I can cross off sc for you lol
u want a TN one??
I can send you a Delaware plate if you don't have one