Many thanks for doing this video. The instructions that came with the machine were not useful. This video saved me! Greatly appreciate the time you take to provide this valuable education.
May God bless you tenfolds!!! Thankfully I found this video before my class 26 was delivered. Followed him step by step so easy!!!! When I looked at the instructions manual after I was done, I knew He was an angel sent by God! Thank u
Realize this an older video, but I ran across it at good time.. I'm wanting to purchase good sewing machine. Just watched Don vid, from your shop, in the future from this vid..lol. Anyway, I'll no doubt end up with the Class 18- flatbed, but may opt for this model.. I'm little north of Plano, so not to far from your shop. Gotta get down there and check them out.. and your hides!! Thanks, Aaron
I found that if you bolt down the head to the table you can "open" the machine at the hinge and put on the belt and simply stand the machine back up and the belt goes on with no problems. Hope this helps.
I'm not quite ready but getting close to getting a sewing machine. I got a shake from a combo of medication and time in the army, this the need for meds. Stitching by hand is very frustrating sometimes. I've tried to find best bang for my limited buck. If I can convince myself, and the wife, to spend that much on one I'll give it a shot
whoever pre drills the holes on these machines shouldnt quit their day job. for 3000. the machine itself sits cockeyed on the table and if you get the table attachment its not even close! pretty much unusable! definitely regretting the purchase!
I've put together a few hundred of these and probably sold a few hundred more... nobody else has had this issue to my knowledge. Call the LMC, It is possible that the wrong pedestal came with your machine in which case they'd be happy to replace it. As far as regretting your purchase, if you really don't like it you can pretty much name your price because they're almost impossible to find right now.
Many thanks for doing this video. The instructions that came with the machine were not useful. This video saved me! Greatly appreciate the time you take to provide this valuable education.
May God bless you tenfolds!!!
Thankfully I found this video before my class 26 was delivered. Followed him step by step so easy!!!! When I looked at the instructions manual after I was done, I knew He was an angel sent by God!
Thank u
You are a hero man. Just got my class 26 in today and was completely lost from the instructions. Thanks a lot for the content
Thanks for the tip about the light plug on the back of the switch! I never knew and was a pain to find an extra plug.
Oh man, you just saved me on installing the belt! Couldn't get that going. And a sweet tip on the light switch. Thank you!
This video was incredibly helpful and informative. Thanks so much! Thrilled to begin working with my new machine!
Put mine together , I pick up from you all on Saturday. You took my fear away with the step by step instructions
Thanks man! Just built up the 26 I ordered from you watching this video!
That was super helpful! Out of all of the views on this you should have more likes! You just saved my sanity and hours worth of chaos.
Thanks for the video Aaron! I'm putting my class 26 together as I type this.
Good luck!
@@makersleathersupply1220 Done, East Peasy!
You do have a nice clean work shop.
Sometimes. Ha ha ha
Realize this an older video, but I ran across it at good time.. I'm wanting to purchase good sewing machine. Just watched Don vid, from your shop, in the future from this vid..lol. Anyway, I'll no doubt end up with the Class 18- flatbed, but may opt for this model.. I'm little north of Plano, so not to far from your shop. Gotta get down there and check them out.. and your hides!! Thanks, Aaron
I found that if you bolt down the head to the table you can "open" the machine at the hinge and put on the belt and simply stand the machine back up and the belt goes on with no problems. Hope this helps.
Thank you. We could kick it.
Awesome video, it made assembling my machine a breeze! Many thanks!
Excellent and clear demo. Thanks, Aaron. This one's on my wish list.
This was huge, thank you!
I'm not quite ready but getting close to getting a sewing machine. I got a shake from a combo of medication and time in the army, this the need for meds. Stitching by hand is very frustrating sometimes. I've tried to find best bang for my limited buck. If I can convince myself, and the wife, to spend that much on one I'll give it a shot
Thank you for this! Made my night way easier.
Thanks! Great video. Very helpful !
Awesome! Thank you for posting this. It really helped me out.
thinking about getting one Thank You1!!
Super cool
It's here! Yay!
Can the class 26 cobra sow leather and heavy material and do have to use different neddles and settings for heavy material and leathers
It will sew through about 3/8" of leather. No settings needed, just adjust the stitch length and tension appropriately.
thanks
Does this machine have the option of adding a flatbed attachment?
Yes it does
For wallets and bags. Will this work or class 3 would be better all round? Why are they silver now not brown anymore :(
I have a cobra 4 and for three years now. great machine and yes it will work on wallets etc. practice first on scrap leather.
Whats the max leather thickness capacity?
Almost 1/2"
But I want to see the video on the hardest way... lol
Yeah, we want to see the wrong way…bwahaha
Я конечно всё понимаю, но неужели в вашей стране так опасно, что даже в личной мастерской пистолет нужно держать при себе?
I wii at least install one mounted bolt. Not a smarty idea. One fall and machine done. 😊😊😊
IS THAT A GUN ON YOUR WAIST. WHAT FOR. I AM CALLING THE MARSHAL,,,,😂😮😮😮
That's probably what it is. Do you need their number? Ha ha ha
whoever pre drills the holes on these machines shouldnt quit their day job. for 3000. the machine itself sits cockeyed on the table and if you get the table attachment
its not even close! pretty much unusable! definitely regretting the purchase!
Have you contacted Leather Machine Co?
I've put together a few hundred of these and probably sold a few hundred more... nobody else has had this issue to my knowledge. Call the LMC, It is possible that the wrong pedestal came with your machine in which case they'd be happy to replace it. As far as regretting your purchase, if you really don't like it you can pretty much name your price because they're almost impossible to find right now.