Thanks SolarFluxx. It’s only 2 bolts to take off the front bar now. Easy for alignments also. Yes great angle and doesn’t rub on the chassis either. 0 offset wheels definitely helps with that also.
ordered my lock kit cos of this video it got delivered today. cant wait to install it. i will probably refer to video another couple of times before the weekend.
Nice, I'm prolonging the death of a 325 that I use as a daily smoker and I've literally just done my front control arms, links and suspension a couple of months ago, should have considered banging a kit like this on ay 😆
Well done mate, great to watch. I've had the same kit sitting in my ebay cart for a while now. Might have to pull the trigger. I bought one of the DS works rear braces based off your other video too, but went for a 6-point seat compatible one.
Thanks Josh 🙏. I have also confirmed they sell replacement parts for that kit which is great. I would have bought the 6-point brace but I don’t think DS had them yet. A bit jealous.☺️
@@BertusBuilds Ah that's great to hear! I'll go ahead and get a set ordered then. Yeah the 6 point was a dream to fit, DS give really comprehensive instructions and tooling to get the job done. Looking forward to the next video 🤙
I use this angle kit on my e36 vert is alright but some parts have broken on me so I’ve had to upgrade some parts to slr replacements slowly but for the price I guess it’s not terrible
@@anthonybranchflower1085 Ackerman adjusters and all the bolts are pretty weak so far I’ve bent an outer tie rod into a v shape somehow so very confusing I upgraded all those parts to slr and I’m hopefully gonna buy an slr kit here soon and just have this kit as a spare
Front 3mm toe out, 6 deg caster, all the camber, 45psi Rear 3mm toe in, 0 camber, 25-35psi I think I cover it on episode 19 but toe and tyre pressures sometimes change depending on the track.
I think I’ve watched all your videos now. I have this very car and planned to do everything you did before finding your vids and it’s been super helpful. A few questions, did you buy headlamp turning signal covers or did you paint them? You tried to paint the headlamp initially lol 😅 Can you give me the link to purchase the front bumper, angle kit and heim joints
Hi Dante, I did tint the turn signals with a paint but I wouldn’t recommend, it’s not very nice. The front bumper was a used M Tech II bumper I purchased from a local auto recyclers. It’s in the makeover episode 17. The angle kits are sold out from the store I purchased them from but they’re the same as the Fapo kit I think. I sourced the Heim joints from a local speedway supplies shop but you can get them online. Just need to make sure one is LH threaded, and one is RH threaded. Hope this was helpful.
Nice vid! Perfect for researching this option. I see a few others have asked but how many events have you put on it? Been holding up? Any highway driving with it?
Short answer Yes, but it’s not really what it’s for, this is a cheaper kit that’s good for drifting and that’s about it there is a good chance after a lot of hard driving it may snap and you have to buy a completely new kit cause they don’t sell spare parts for these cheaper kits, you’d be better off buying nice adjustable coil overs and maybe some steering adjusters for more angle
Hey mate! I was looking at getting this kit. Have u drifted much after the install? Is it good quality? Does it bend? A review on it would be sick! Im in Sydney
It's probably one of the best upgrades I've put on the car. Ive spun off the track into grass, dirt and over ripple strips and no issues. Low price and good quality don't usually go together. If you want top quality I would spend the $. They seem perfect quality for me because I'm doing a budget build. They sell replacement parts also. If you break a Heim joint they will just sell you the part. There's videos of me drifting with them. I may review them next year after I've had more hours on them.
Hello，I am the eBay seller who is selling FAPO drift kit，would you mind me add the purchase link here just for someone need🤲🏻（BTW，we have special discount these days…）
That angle is insane! Nicely done. Also you taking off the bumper gave you so much more space to work on the car. I'll have to start doing that more~
Thanks SolarFluxx. It’s only 2 bolts to take off the front bar now. Easy for alignments also. Yes great angle and doesn’t rub on the chassis either. 0 offset wheels definitely helps with that also.
ordered my lock kit cos of this video it got delivered today. cant wait to install it. i will probably refer to video another couple of times before the weekend.
Awesome. Reach out if you get stuck. 🌴🤙🏻
About to order this kit. Great video!
Keen to see this drift! tempted to get one of these now...
Can confirm it goes good🤙🏼
Another mint vid thanks heaps Bertus, frothing to see the same kit on the same car, just watched episode 19, you shred bro!
Thanks Shandy. It goes alright for a bog stock 323!
just installed the same kit, wouldn’t have been able to do it without this video 🫡
Gotta love the bulldog stance though with the extended lcas
Nice, I'm prolonging the death of a 325 that I use as a daily smoker and I've literally just done my front control arms, links and suspension a couple of months ago, should have considered banging a kit like this on ay 😆
Well done mate, great to watch. I've had the same kit sitting in my ebay cart for a while now. Might have to pull the trigger. I bought one of the DS works rear braces based off your other video too, but went for a 6-point seat compatible one.
Thanks Josh 🙏. I have also confirmed they sell replacement parts for that kit which is great. I would have bought the 6-point brace but I don’t think DS had them yet. A bit jealous.☺️
@@BertusBuilds Ah that's great to hear! I'll go ahead and get a set ordered then.
Yeah the 6 point was a dream to fit, DS give really comprehensive instructions and tooling to get the job done.
Looking forward to the next video 🤙
Great vid. Think I’m going to try and find a similar kit as well
Great video!!
Thank you. Hope you got value out of it. 🙏
Could you tell me what wheel and tire specs work without trimming thank you great guide
16x8. +6 offset with 205/50 Is what I’m running. Barely any scrubbing on the chassis rail. They do clip the front edge of the guard and bumper though.
Hey mate how did you get the hein joint to the k frame to align straight rather then being maxed out on itself?
You’re the fuckn man! I love the video helped me with my e46. I tell you man those dang apprentices 😅🤣 much love!
I use this angle kit on my e36 vert is alright but some parts have broken on me so I’ve had to upgrade some parts to slr replacements slowly but for the price I guess it’s not terrible
What parts broke mate
@@anthonybranchflower1085 Ackerman adjusters and all the bolts are pretty weak so far I’ve bent an outer tie rod into a v shape somehow so very confusing I upgraded all those parts to slr and I’m hopefully gonna buy an slr kit here soon and just have this kit as a spare
Can you share your alignment set up ? Toe , camber , caster ?
Front 3mm toe out, 6 deg caster, all the camber, 45psi
Rear 3mm toe in, 0 camber, 25-35psi
I think I cover it on episode 19 but toe and tyre pressures sometimes change depending on the track.
@BertusBuilds thanks man 💯 , I just installed the same angle kit so far so good just needed some alignment tips thanks alot man 😁👍
@@franciscodominguez4347 alignment results may vary ☺️ but they work as good base settings for me. Good luck. 🤙🏻
Nice vid!
I think I’ve watched all your videos now. I have this very car and planned to do everything you did before finding your vids and it’s been super helpful.
A few questions, did you buy headlamp turning signal covers or did you paint them? You tried to paint the headlamp initially lol 😅
Can you give me the link to purchase the front bumper, angle kit and heim joints
Hi Dante, I did tint the turn signals with a paint but I wouldn’t recommend, it’s not very nice.
The front bumper was a used M Tech II bumper I purchased from a local auto recyclers. It’s in the makeover episode 17. The angle kits are sold out from the store I purchased them from but they’re the same as the Fapo kit I think. I sourced the Heim joints from a local speedway supplies shop but you can get them online. Just need to make sure one is LH threaded, and one is RH threaded. Hope this was helpful.
Nice vid! Perfect for researching this option. I see a few others have asked but how many events have you put on it? Been holding up? Any highway driving with it?
Thanks mate. I have done about 6 track days and no issues.
Did you run some spacers?
No spacers.
How did you go about the caster adjustment? What did u need to do to the part? I have this kit for my e30 just installed it
Did you ever figure this out?
you reckon you could dial this kit in for hill carving instead of drifting?
Short answer Yes, but it’s not really what it’s for, this is a cheaper kit that’s good for drifting and that’s about it there is a good chance after a lot of hard driving it may snap and you have to buy a completely new kit cause they don’t sell spare parts for these cheaper kits, you’d be better off buying nice adjustable coil overs and maybe some steering adjusters for more angle
What kit is this?
How has this kit held up? Long term
Good. I’ll do a review soon. I get asked this a lot.
Hey mate! I was looking at getting this kit. Have u drifted much after the install? Is it good quality? Does it bend? A review on it would be sick! Im in Sydney
It's probably one of the best upgrades I've put on the car. Ive spun off the track into grass, dirt and over ripple strips and no issues. Low price and good quality don't usually go together. If you want top quality I would spend the $. They seem perfect quality for me because I'm doing a budget build. They sell replacement parts also. If you break a Heim joint they will just sell you the part. There's videos of me drifting with them. I may review them next year after I've had more hours on them.
How has this kit held up?
Great 👍🏻
hey man, what type of grease r u using
Just plain old bearing grease.
@@BertusBuilds thx, probanly a dumb question but i just wanna get the right shit lol
@@corvo46 no not at all 🙂. Standard grease only bad on rubber components.
@@BertusBuilds 👍how’s this kit held up? thinking of getting it when i get my next paycheck lol
@@corvo46 zero dramas.
no swaybar?
no swaybar 👍🏻
Any particular reason why not, or just preference?
Angle kit name ?
if you google fapo lock kit you will find it
Hello，I am the eBay seller who is selling FAPO drift kit，would you mind me add the purchase link here just for someone need🤲🏻（BTW，we have special discount these days…）
This is the ebay fapo kit?
I think it is yes
Nice! drive bare foot 😊
super or ultra??