Good morning SeBy, just was notified today that the Vitus id offically for sale now. If ordered at a dealer it will be delivered within a week if not in stock in shop. Hope you will have yours soon too. Have a great day, Rob
Hi just purchased a wizard 220 RTF version but cannot get it to fly , I've made a short 1 min video asking for advice/Help, would be very grateful if you could have a look and offer some advice cheers Nige
Hi SeBy, next week is official introduction of the Vitus in The Netherlands. One big dealer will have a day where people can test fly the Vitus. This means soon they will be available in all shops. Most interested in the first reviews. Have a nice weekend!!
I had the same issue, if you move your drone while its connected to the PC make sure it moves the same way in betaflight as you tilt it around. I had to change the Yaw to -90 degrees in the configuration settings where the "Board and sensor alignment" inputs are. Took me a while to figure out as well...
Your video is very good and detailed for noobs like me getting into the FPV drones, however, you missed out the details needed to connect to Betaflight configurator, I had a bad time researching and downloading the needed drivers. Other than the mentioned, great video!
Got a noob question here : Why choosing 200mw instead of 600mw ? if i am correct it relate with the quality of transmitting, so why don't use the more power available ?
Do you happen to know what protocol the VTX is for this? I am having some weird signal issues and cannot troubleshoot without betaflight support. Turned the power all the way up with no change... the video just drops out every 5 to 10 seconds completely. Not sure if its the VTX or a setting.
Thank you for the video SeBy. I just got one of these, but I got the BNF version without the transmitter because I had the Eachine i6 that I got with the QX90. As I was trying to set this up, I believe I messed up the settings. Can you share the text file of the CLI dump you did so I can get my factory settings back?
Salut, super video, mais j'ai un petit probleme, j'ai tout fais avec le bouton Bind sur le drone, sur le recepteur mais ici a 36:13 avec tout les details que t'as dit, je n'arrive pas a connecter mon drone au receptur... A chaque fois quand ton drone clignotais en rouge moi aussi, quand il clignotais pas, moi non plus... tout etait bon jusqu'au moment ou je bouge les joysticks sur la telecomande et mon drone ne recoit pas le signal...Est ce que tu pourrais m'aider s'il te plait ? :/
C'est sur Betaflight que tu vois pas les mouvements des sticks ? Si oui c'est sur la partie configuration radio. Je sais pas quel est ton récepteur ? En général c'est dur FrSky ou du Flysky. Choisir un récepteur Serial based
Allo Seby, J'ai reconstruis mon X220s. J'ai suivis avec precaution votre video. Je crois que j'ai bien tout les settings comme il faut mais le Wizard ne s'arme pas. Dans Betaflight mon "Stick Low" threshold est a 1005. mon throttle stick at low est a 885. Pourquoi ca ne s'arme pas? In English in case that help. After following your video and settings everything as you showed, Ibus, centered everything, Seeing my stick reacting as expecting in Bflight. I have set my stick low threshold at 1005 and my throttle stick as low is at 885, my wizard doesn't arm. Any advice anyone? Thanks Seby for your video. it has been very helpful.
Hi man, thanks for your reply. After two days I finally worked it through! After successfully flashing Omnibus F4SD I couldn't connect to FC to do settings. In the end I installed some kind of driver patch (I'm so messed up now, I can't even remember when I got it and how it is called- tried so many). So finally I can connect to BF and do settings. I'm watching your video right now. Still have a problem, I successfully bind TX, but doesn't show in receiver tab in BF. I guess I have ports mixed up. Will worked it through. After dealing with drivers and connecting issues, every thing else looks like walk in the park...Thank you again
Hello Seby DocKy, i love you videos I enjoy watching them, I was wondering if you can help me with my x220s wizard. I did Betaflight upgrade to 4.1 last night from I think 3.5 or 7 and now I forgot what you said to do, save the dump for my wizard, now I lost all flight control Vtx everything? could you help me? do you have the dump still and will it work for mine? do you know how I can fix this as I am pretty new to this Fpv stuff ... any help is good, thanks for video it help me but i did a stupid thing by not saving the dump, i have this drone, Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 40CH 30A Dshot600 800TVL Flysky FS-i6X RTF - Mode 2 (Left Hand Throttle) let me know anything if you can, thanks in advance!!
@@sebydocky5080 hi, I already go to ur link, but I can't find any dump file and X200S drone model, please help me master, I want to fly again.. Please 😢
SeBy DocKy No the drone doesn’t respond to my inputs on the remote. (The bars in the receiver section won’t move). I also had the problem with arming earlier and flashed the drone again. Now I have the problem with the remote.
This one should offer super range: www.banggood.com/Flysky-X6B-2_4G-6CH-i-BUS-PPM-PWM-Receiver-for-AFHDS-i6s-i6-i6x-Transmitter-p-1101513.html?p=YL2512105842201212FR
salut merci pour ta vidéo je voulais te pausé une question jai le meme quad que toi Eachine X220S par contre je suis pas en dishot 600 mais en 125 c normal?? Sinon il faut faire quoi pour le mettre en 600 ???
Hey man, i bought this drone too, i could fly it one time (didnt crash it), because my radio broke, now my new radio arrived, i intall the receiver and bind it, but when i power the drone, the tail leds are white, and the drone doesnt do anything when i move the radio sticks. I tried to see if the drone works or not on betaflight, and yes, but when i use the motors throttle on betaflight, the drone start beeping crazylie, i guess it could be an alarm, but im new at this, so dont really know. Please help, im very lost
SeBy DocKy i “fixed” the drone beeping, was a battery alarm. On betaflight the radio sticks works fine, but not al the time, sometimes i experience some interference, like if the battery drone turned off, but dont really know. White leds still, including when i only plug the usb cable on the drone, insteas of the battery.
got my tx binded to the rx. but cant get any signal at all no matter what. ive spent 2 days trying everything, i have the older fs-i6 and im almsot ready to just buy the irangex. any idea how to get my tx to work? i have a flysky x6b and also tried my lame a8s, no luck at all. switched signal to uart 3, nothing.
When binding is ok, press the bind button 2-3s until three fast flash appears. It turns the receiver in iBUS mode. then in betaflight, select iBUS instead of SBUS
SeBy DocKy I have my X6b currently installed. holding the bind doesn't so anything 🙁. leaving for vacation in 3 hours and can't bring my quad now. so sad
Thanks. After banging my head yesterday afternoon/night and today almost all day (still do), loading your dump file should be the smartest thing for me. I don't know, does every newby have to go through hours of painful typing, searching, connecting/unconnecting, some more searching, try and error-ing process, when one should be flying... Frustrating, really. Thank you
Pas de bouton bind sur le récepteur ? En principe pour du FlySky... il faut... Appuyer et laisser appuyer le bouton bind du récepteur..... et appuyer et laisser appuyer le bouton bind de la radio tout en l'allumant.... Avec 2 mains, c'est pas facile j'avoue
Mon audience est à 95% anglo-saxonne ..... :( D'où le choix de l'anglais dés le départ. Il y a pas mal de chaines francophones de drones....Je n'ai pas spécialement une à recommander .... En fait, je ne regarde que anglo-saxonnes également ...
why would you measure the battery ??? very unnecessary even if wrong size slightly it would work. you don't look smart just because you measured your battery lol. i guess if you want to pretend to be a rocket scientist youtube is the place to do it
you saved me from going insane. I watched so many other videos on this whole process and this is by far the best. thank you so so so much.
ce tuto le meilleur pour son wizard !!!je l'ai regardé 50 fois et il m en apprend toujours :) et je parle pas anglais**
The best video I have watched. Everything in it. As a noob I can tell that is very helpful. Regards and THX. The best video on RUclips about 220s.
Good morning SeBy, just was notified today that the Vitus id offically for sale now. If ordered at a dealer it will be delivered within a week if not in stock in shop. Hope you will have yours soon too.
Have a great day, Rob
Thank you for the knowledge, it was a big help
This is an amazing tutorial, but why is the microphone made out of a potato?
Hi just purchased a wizard 220 RTF version but cannot get it to fly , I've made a short 1 min video asking for advice/Help, would be very grateful if you could have a look and offer some advice cheers Nige
Hi SeBy, next week is official introduction of the Vitus in The Netherlands. One big dealer will have a day where people can test fly the Vitus. This means soon they will be available in all shops. Most interested in the first reviews.
Have a nice weekend!!
Ho great :) so mine should be so far so :)
Sir you are great!!!
You are the boss man !!!
you saved me! thanks
Because when i press to fly up he makes a flip to left or to right and i dont know what to do
I had the same issue, if you move your drone while its connected to the PC make sure it moves the same way in betaflight as you tilt it around. I had to change the Yaw to -90 degrees in the configuration settings where the "Board and sensor alignment" inputs are. Took me a while to figure out as well...
Your video is very good and detailed for noobs like me getting into the FPV drones, however, you missed out the details needed to connect to Betaflight configurator, I had a bad time researching and downloading the needed drivers. Other than the mentioned, great video!
Got a noob question here : Why choosing 200mw instead of 600mw ? if i am correct it relate with the quality of transmitting, so why don't use the more power available ?
Je viens de voir que tu reponds en francais :p tu peux me repondre en francais donc si tu preferes :p
Hi i have not this display to change band and mw... i have a eachine wizard 220s to... why i dont have it
Yes good video!
Do you happen to know what protocol the VTX is for this? I am having some weird signal issues and cannot troubleshoot without betaflight support. Turned the power all the way up with no change... the video just drops out every 5 to 10 seconds completely. Not sure if its the VTX or a setting.
thnk you so much
Do you have to instal beatflight to take of the drone? Or can you fly without it?
How do you make it do the 3d flippy thingy, essential for any GOOD DRONE,
Hehehehehe.....What you reckon?
Just got one of these, it’s my first drone... the right stick alters the throttle though is this right or should that be the left stick?
Thank you for the video SeBy. I just got one of these, but I got the BNF version without the transmitter because I had the Eachine i6 that I got with the QX90. As I was trying to set this up, I believe I messed up the settings. Can you share the text file of the CLI dump you did so I can get my factory settings back?
You can grab it @ www.drone-maniac.com
Perfect, thx!
and the next question :D in my betaflight i dont have this... Failsafe... its the newest version
Thank you!
PLS you have setup original the x220s ? PLS
the beeper dont work in my 220s in betaflight
Hi there you don't by chance have the orginal dump you save do you? that you can send to me? thank you
is the drone ready to fly ? or do i have to use betaflight ?
betaflight, its not truly rtf
Nu drone doesnt wanna let the motors turn on what is the problem
Hello do you think can I add a condensator for delete the interference sooty for my English I speak French
Oui en // de la batterie
SeBy DocKy ah tu parle français.... et encore merccciiii beaucoup pour ton titi grave à toi mon x220s remarche !!
nice
Salut, super video, mais j'ai un petit probleme, j'ai tout fais avec le bouton Bind sur le drone, sur le recepteur mais ici a 36:13 avec tout les details que t'as dit, je n'arrive pas a connecter mon drone au receptur... A chaque fois quand ton drone clignotais en rouge moi aussi, quand il clignotais pas, moi non plus... tout etait bon jusqu'au moment ou je bouge les joysticks sur la telecomande et mon drone ne recoit pas le signal...Est ce que tu pourrais m'aider s'il te plait ? :/
C'est sur Betaflight que tu vois pas les mouvements des sticks ? Si oui c'est sur la partie configuration radio. Je sais pas quel est ton récepteur ? En général c'est dur FrSky ou du Flysky. Choisir un récepteur Serial based
I did your tutorial step by step and my drones motor broke and the board started smoking?
Allo Seby, J'ai reconstruis mon X220s. J'ai suivis avec precaution votre video. Je crois que j'ai bien tout les settings comme il faut mais le Wizard ne s'arme pas. Dans Betaflight mon "Stick Low" threshold est a 1005. mon throttle stick at low est a 885. Pourquoi ca ne s'arme pas?
In English in case that help. After following your video and settings everything as you showed, Ibus, centered everything, Seeing my stick reacting as expecting in Bflight. I have set my stick low threshold at 1005 and my throttle stick as low is at 885, my wizard doesn't arm. Any advice anyone? Thanks Seby for your video. it has been very helpful.
my receiver section keeps going blank in configuration even after changing it and saving....
Hi,
the yaw and roll controls are reversed, do you have any idea on how to fix it please?
Two options. Reverse these two channels from the tx i6 or in headlight
@@sebydocky5080 thanks it works :)
Can this run on 3s? or would it be slower than the regular wizard?
Shoud take off in 3S but without action cam ...
does the pagoda antena of this drone work with the antena deliver with the vr007 pro headset from eachine ?
If I am not wront the VR007 Pro antenneas are also RHCP so yes
Hi. I just flash mine, but it couldn't connect to BF. Which firmware version should be flashed to? Thanks
If you can't connect to BF it means you have some drivers problems ....
Hi man, thanks for your reply. After two days I finally worked it through! After successfully flashing Omnibus F4SD I couldn't connect to FC to do settings. In the end I installed some kind of driver patch (I'm so messed up now, I can't even remember when I got it and how it is called- tried so many). So finally I can connect to BF and do settings. I'm watching your video right now. Still have a problem, I successfully bind TX, but doesn't show in receiver tab in BF. I guess I have ports mixed up. Will worked it through. After dealing with drivers and connecting issues, every thing else looks like walk in the park...Thank you again
What is your specific receiver ? FrSky ? FlySky ?
It is Flysky
so in the configuration tab, select "serial based receiver" then "iBus" in the other field
Jeez i did all the steps... step by step... and now the FS i6 wont connect to the x220s again.. and there was no binding cable included..
appena arriva e pronto a volare ? ho ce da fare modifiche
Hello Seby DocKy, i love you videos I enjoy watching them, I was wondering if you can help me with my x220s wizard. I did Betaflight upgrade to 4.1 last night from I think 3.5 or 7 and now I forgot what you said to do, save the dump for my wizard, now I lost all flight control Vtx everything? could you help me? do you have the dump still and will it work for mine? do you know how I can fix this as I am pretty new to this Fpv stuff ... any help is good, thanks for video it help me but i did a stupid thing by not saving the dump, i have this drone, Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 40CH 30A Dshot600 800TVL Flysky FS-i6X RTF - Mode 2 (Left Hand Throttle) let me know anything if you can, thanks in advance!!
hi, the dump file can be found here: www.drone-maniac.com/test-eachine-wizzard-x220s/
@@sebydocky5080 hi, I already go to ur link, but I can't find any dump file and X200S drone model, please help me master, I want to fly again.. Please 😢
I made every thing like you but is still won't work. Help?
It's not arming ?
SeBy DocKy
No the drone doesn’t respond to my inputs on the remote. (The bars in the receiver section won’t move).
I also had the problem with arming earlier and flashed the drone again. Now I have the problem with the remote.
hello I have a remote fsi6 eachine, and I want to know what the receiver choose to x 220s wizzard. thank you.
This one should offer super range: www.banggood.com/Flysky-X6B-2_4G-6CH-i-BUS-PPM-PWM-Receiver-for-AFHDS-i6s-i6-i6x-Transmitter-p-1101513.html?p=YL2512105842201212FR
Merci beaucoup 😄😀
salut merci pour ta vidéo je voulais te pausé une question jai le meme quad que toi Eachine X220S par contre je suis pas en dishot 600 mais en 125 c normal?? Sinon il faut faire quoi pour le mettre en 600 ???
Se connecter sur betaflight, onglet configuration en haut à droite .... Tu pourras choisir Dshot600
merci de ta raiponce je n'ais rien d'autre a faire ?? Recalibré les ESC peut être ?? Sa vas changer quoi au juste ? Je connais pas grand chose hihihi!
Non en Dshot ... plus besoin de calibration des ESC....
ok je eseille sa vas changer quelque chose sur les performance ou le pilotage ??
Une dernier question je doit mettre aussi dans onglet system configuration (Gyro updat frequence 8 et PID loop frequence a 8 comme toi ???
Hey man, i bought this drone too, i could fly it one time (didnt crash it), because my radio broke, now my new radio arrived, i intall the receiver and bind it, but when i power the drone, the tail leds are white, and the drone doesnt do anything when i move the radio sticks. I tried to see if the drone works or not on betaflight, and yes, but when i use the motors throttle on betaflight, the drone start beeping crazylie, i guess it could be an alarm, but im new at this, so dont really know.
Please help, im very lost
So can confirm than you can see sticks mouvements of your radio in betaflight in the receiver tab ?
SeBy DocKy i “fixed” the drone beeping, was a battery alarm. On betaflight the radio sticks works fine, but not al the time, sometimes i experience some interference, like if the battery drone turned off, but dont really know. White leds still, including when i only plug the usb cable on the drone, insteas of the battery.
got my tx binded to the rx. but cant get any signal at all no matter what. ive spent 2 days trying everything, i have the older fs-i6 and im almsot ready to just buy the irangex. any idea how to get my tx to work? i have a flysky x6b and also tried my lame a8s, no luck at all. switched signal to uart 3, nothing.
DId you try the "i-BUS" settings ? as I showed in the video ?
When binding is ok, press the bind button 2-3s until three fast flash appears. It turns the receiver in iBUS mode. then in betaflight, select iBUS instead of SBUS
SeBy DocKy also I have the fs-i6 not the irangex but I will try now. Been dealing with this forever now. I just wanna fly lol
SeBy DocKy I have my X6b currently installed. holding the bind doesn't so anything 🙁. leaving for vacation in 3 hours and can't bring my quad now. so sad
Ha it's the X6B receiver ... I believed you were using the A8S receiver shipped with the RTF version
Hi. Do you think you could share dump file? Thanks
you can find it at www.drone-maniac.com
Thanks. After banging my head yesterday afternoon/night and today almost all day (still do), loading your dump file should be the smartest thing for me. I don't know, does every newby have to go through hours of painful typing, searching, connecting/unconnecting, some more searching, try and error-ing process, when one should be flying... Frustrating, really. Thank you
Hi. I load your dump file and now I again can't connect to FC... back on the beginning...
Salut, bonne vidéo !'
Perso j'ai un 220s arf et une manette flysky i6, je n'arrive pas a relier mon récepteur a la carte, comment faire stp?
Pas de bouton bind sur le récepteur ? En principe pour du FlySky... il faut... Appuyer et laisser appuyer le bouton bind du récepteur..... et appuyer et laisser appuyer le bouton bind de la radio tout en l'allumant.... Avec 2 mains, c'est pas facile j'avoue
SeBy DocKy non, je n'arrive pas a trouver le cable qu'il me faut!
pas besoin de cable ...
SeBy DocKy salut, merci de la réponse mais il faut forcément un cable entre la carte de vol et le récepteur non?'
ha pardon je croyais que tu parlais de Bind ....
hello, can you send me the original cli-file from the wizard x220s?
you should find it in the corresponding review page @ www.drone-maniac.com
so I've got all the way up to beta flight and nothing i can get anything to connect!!! help me please someone
Did you install correctly both drivers ?
My fs i6 d’Oeste bind To its reciever
can you send me that text file? i messed up and lost it and everything is ruined!
Boa
You are breaking the prope you're supposed to turn it
hehehehehe
Because my drone is weird
Too bad that Drone's reach is too low
certain que tu es français pas possible des revue en français ????????
Mon audience est à 95% anglo-saxonne ..... :( D'où le choix de l'anglais dés le départ. Il y a pas mal de chaines francophones de drones....Je n'ai pas spécialement une à recommander .... En fait, je ne regarde que anglo-saxonnes également ...
why would you measure the battery ??? very unnecessary even if wrong size slightly it would work. you don't look smart just because you measured your battery lol.
i guess if you want to pretend to be a rocket scientist youtube is the place to do it
It can be usefull for brainless guy as you are to find a compatible spare one directly while ordering....
its two twenty not twenty twenty