Eachine WIZARD X220S FPV - Full Review - [Unboxing / Inspection / Flight-CRASH! Test / Pros & Cons]
HTML-код
- Опубликовано: 26 дек 2017
- Enjoy my full review of the Eachine Wizard X220s Race Drone.
Get it here www.banggood.com/custlink/33G...
SkyZone and other FPV Goggles goo.gl/bGxe6R
Drone Launch Pad goo.gl/e3wbxP
The Orange RunCam 3 in video has been discontinued, here are some alternatives goo.gl/8C6cYy or amzn.to/2DjTtbu
Tattu R-Line 2.0 high performance batteries 1300 & 1500 mah amzn.to/2Dn0Vmi
Help support our channel / dustindunnill Наука
Hey guys got some comments that the links were broken to where you can get the drone.. Here you go www.banggood.com/custlink/33GmMn4nSH stay healthy and happy flyin!
How far it can fly?
@@Srvch77 Would not recommend, its kinda out of date and u can get better for ur money. Go to the intofpv forums if you have any questions.
@@jean-lucsedits4319 can you pls share the link
you have so many drones is there one I could buy from you like just a small but fast one like older just so i can say i got it from the drone king him self please ..nothing fancy just good and fast something
if you can .....God Bless keep up the amazing vids and thank you for your expertise
@@justkillingit6920 you should really not put your address on a public comment
When you’re into drones but know you’ll never be able to afford one
Yep that’s me
Same here boi 😞
Your not alone
@@ka1sen771 me asswell
Lol that was me 6 months ago then I got a job and just spent 2 grand on gear
@@mbs6585 u a drug seller now?
Looking at getting my first FPV drone, thanks!
Oh nice
I just got one, DO NOT USE THE INCLUDED CHARGER! it tried blowing mine up by charging it over 4.3v! I reccomend a venom 4s
Me too men
For your first fpv you should get something smaller like a Emax tiny hawk it comes with everything you nee
I built my first one
Hi.. You have given a start to end action analysis of this Eachine x220s quad. I have just ordered an hour before seeing this video. So b4 my quad arrives to me am very much satisfied to see your detailed and superb review. Being a beginner of this hobby I feel informative to start my hobby on fpv using eachine x220s model. Thanks.
May I ask where r u from and how did you buy it ? I'm in Asia and I plan to buy from banggood. But there are a lot bad reviews about them.
Nobody crashes more drones than +Dustin Dunnill! Thank you for risking it all to help us make a buying decision Braddah!
+russ lol. You bet Russ 🤙🍻
@@DustinDunnill does it come with the fpv goggles
No but there are very cheap options to get started 🍻
@@DustinDunnill which are best?
Try cheap Beta FPV or Eachine. Pretty good at low cost 🍻
Great video thank you. I've flown DJI stabilized drones for a couple of years and just had a Tinyhawk for a few months and this is my first "next" quad.
Learned to solder and got a receiver for my QX7 and I'm all set to go this coming weekend. Can't wait to give it a go!
Hey Dustin, I’m new to all this and this video definitely sold me and I am excited to order the thing i need and fly! Thanks for a cool video
Very nice unboxing /review and flight demo as usual! Thanks!
Ok I want to try FPV now. That was fun to watch. Thanks.
I enjoy your reviews and how you leave open the possibility you could have been at fault when something went wrong (although I think the technology failed in this case). It’s also funny (impressive) to me how you casually know every little piece and part name.
Thanks Andrew. Once you get over the learning curve it's a blast 👍
Realy nice unboxing and review 👍 And man, I love the new intro .
+Marlon S. Thanks Marlon 👍
Brutal crash propp change and still going strong ill buy this one for learning how to fly freestyle
Your review is quite professional and comprehensive
You can activate voltage display in beta flight. Don't understand why they didn't do it in factory...
You're welcome
Where can you activate it? Sorry I’m very new to fpv, literally did my second flight yesterday.
There were earlier version and released of this quad, the later version fixed the problem
N u t you can turn it on in the configurations tab and enable OSD, and the voltage display should be already setup for you, if you have this quad it should be able to have the vbat wiring done
@@creambaeggie7228 which version fixed the voltage issue ? If I understand, I don't need to
add a current sensor to check the voltage of the battery ? thx
Hi, the microsd slot is for the blackbox. An app that shows motors behavior of each flight.
Thanks bro love watching your channel very informative
This is probably the best looking drone for me. Carbon fibre with the purple contrast 😍
Love the Tattu and R-line batteries. I have a bunch of them👍
Insanely smooth with stock pids great roll rates I absolutely love it, the only thing are the props are too hard and don’t flex that much with stress after flights
Thanks for all your great reviews! I'm getting into fpv flying now after messing with micro drones. I'm over here in Hilo on the Big Island. Love what you are doing!
Thanks Matthew. Make sure you check it the drone racing club over there. Going the Facebook site if you haven't already 😅🤙
Dustin Dunnill Yeah met some of the folks. Cool peeps!
just ordered hs720e drone and now i want this fpv drone,thanks for your review
Merry Christmas Dustin
Great review man.
Really like your channel
Thanks ✌️
Another Great Review!! The Sad Thing Is, Your "Rusty" Flying Skills, Are Way Better Than I Am In My Newbie State Just Getting Into FPV Racers.. My DJI Phantom 4, And Other GPS Quads Sure Make Us Overly Reliant .. Keep Up The Good Work, And Happy New Year!!
+Mark Adamson Thanks Mark. Took me a few years of occasional FPV flying to get here. It really helps with flight confidence when you have a good flying racer.
I got the wizard, and I setup the AUX switches so i have arming, flight modes and beeper. And i have fully setup the drone and i have charged the battery and im ready to go :-) Great Video
How is it now?
Right on
this video is the reason im into fpv to this day
Nice review and demo . The flying was very good also . I like it the video that is .
Nice review, was interested in getting one when they first came out but saw that the arms were not fully carbon fiber and were breaking in the reviews i saw it's nice to see they have changed it back to full carbon fiber arms, I believe that SD card slot on the side might be for the black box recording.
Thanks for this review. I’ve been eyeing this one for a while. I believe the voltage on OSD is configurable in betaflight. Also for the beeper
One of the best drone reviewer
+ROBES CHANEL 🙏😅🤙
Keep all the great work up you are my favourite youtuber love absolutely love your videos I want a fpv drone but don't have the money I want the lizard95
💗
it looks great, i think this one is going to be my first drone
Hey, did you buy it? :)
Just watched your video of your hosim rc truck, buying that Now imma get this. THANKS!
That quad looks insanely fun! I have got to get my hands on one of those! I need that. I have just flown some hobby quadcopters, been flying for about 5 years and never tried anything like that, but it looks amazing! I am gonna save up
u r happy with this drone right? i m checking this out. i m thinking to buy a racing drone. but i couldnt decide
Top gun flyer Dustin 👍man I only wish I could fly as good as you..I need a hell off alot more practice 😉
Excellent review as always....subbed and really enjoy your video 👍🛫
Yeah Dustin I thought it had low voltage beeper too, and my battery swelled up more than my wife after 10 years of marriage on my first run :(
Mr. Mike wow lol
+Mr. Mike Yikes! I wish they would have set it up properly since it is an RTF 😕
hahahaha
Lol!
I just have a 5 min timer everytime I fly
thats the best runcam footage I have seen
Wow this was a great informative review, I've learnt a lot, thanks, you have a new sub
got it today, broke 2 props already. Great start xd
EDIT: I also cut myself with it... hurts
and fuck it just broke..
That sucks man hope you get another one
Thanks guys but the battery and motors broke
Bruh
@@KeenuYT did they just stop working or did you crash it?
Allways wanted one but cant afford it so this really helps thanks so i will start saving
Not sure if the fall was due to propwash or a bad prop, but when coming down from a "punch up", I always come down doing a funnel or just apply forward pitch and throttle to avoid propwash(free fall due to turbulent air below) . That transmitter is very good, has a 1+ mile range with a good Flysky receiver. Easy to configure in Betaflight too. Great review as always!
using the common flysky ia6b receiver is the good one?
Would this make a good first fpv dude ? Watching god knows how many videos on builds a rtf's and still can't make my mind up 🤔
i was the same way, honestly the best route is to buy the parts and build it yourself so in the event of a hard crash(which is very common) youll have a good understanding of how to repair. dont cheap out. spend the extra money and get quality parts. i wouldnt recommend the wizard to be hoenst
How to solve all Wizard X220S Problems!
- Replace the Receiver with an XM+ Receiver (Assembly them Horizontal in a 90° Degree on the Frame ABOVE the propellers), Your Receiver is faulty, starting from the first 1000 sell outs they selling the shitty receiver, wich like in mine and your case causes the VTX to drop Randomly....
- Solder to + - a Capacitator from Phillips FM Series 1000µf, this will fix your Battery Voltage flipping between 0.0 - 1.0 to 0.0 - 0.3 and prevent sudden Fail Safe + it makes your drone fly so much smoother mate!
- Flash above Betaflight 2.* vor the FPV drops
Cheers
@@RC_Aviator not everyone can build a drone man
Awesome, hi from Brazil!!
Great review, nice quad.
I realize this video is 2 and a half years old, but the reason it didn't auto-level when you let it fall @ 16:44 was because you have it set to stop the motors when no throttle is present. So after your punchout when you brought the throttle to 0, it started tumbling because no air mode was active to keep it upright. Since you were blipping the throttle instead of holding it, the FC didn't have a chance to correct its orientation before you cut throttle again. My wizard was doing this when I first started using it, but once I figured out the issue I changed the STOP MOTORS to off in Betaflight and now I can go 0 throttle while in Stability without tumbling! You do have to deal with props always spinning when armed though! :)
Your GoPro video footage looks great!
Not to much wrong with your flying, great review.
Great video , thanks !
I recently found your channel and have watched a bunch of your videos. I've really liked them all.. Needless to say the weather makes me jealous.. It's 5 in Ohio.
That thing really screams.. Any way good video
If I had a drone like Brother Dustin, it would have been fun playing with Brother Dustin's drone.
Pretty decent starter kit not bad. Thanks
Really enjoy your calm demeanor, have you been in the military? I'm sure you're a guy who keeps his head cool when shit goes down lol. Thanks for the free content! I own the older x220 and was curious what changed
Not US military but I have served Vader in the past 😁
Nice review and quad. Cheers buddy 👍✈️😊
+Georgewrigley Thanks man. Lots of fun and flys good out of the box 👍
How long is the fight time on one battery?
Hey everyone, i have problems with my new drone wizardx220s on punch with 4 cell battery. drone starting shaking and loosing control..! any suggestions??
Unfortunatelly it doesn’t ship to Indonesia. The aux switches is at the last of Menu System then it should set on aux channels from Menu Function. Anyway nice complete review as always.
Nice drone review sir
Thanks for the review bro
+thafactor24 👍🍻
Please can you review the Eachine Novice 3. Just ordered it and find your reviews awesome. Would really appreciate it!
Hey man i just wanted to chime in....you can get some blue locktite and apply it to the screw threads....that will hold them if you use the red one itll be harder to take off.
Hi Dustin dunnill. Did you buy it from banggood? Because on banggood they say that it is only the drone or did you buy the controller and the battery separately from the drone? really cool video!
nice one thanks man👍
You had me at "grippy sticky pad." Cheers. :)
airmode and already installed by default settings?
What are some cheaper goggles that can connect with that drone
im gonna order this in 2 days, cant wait to get it
@Marceroni 02 no i orderd something else.
I sit back, relax and finish my new drone videos, while I watch your review about a drone :D
😅
It's done in around 10 minutes...than I can go to sleep. It's around 1am in germany :D
kool buddy...good work....I hope to get one some time
You have to do a part II, I want acro lol. But great review man, sounds like that f4 board isn't bad.
+ab_ vevo air mode is basically acro 👍
Lookin forward to getting this fpv drone
What goggles should I be going with for this drone? Nothing over the top just a well rounded one. Thanks
I had that mount in a tyro bild and now it's pursanaly attached to a bang god berry versatile
Love the drone
Snagged me a brand new one gonna do some mods on it and gonna be my daily for bandos and bashing Vrap on
in self level mode, if you zero the throttle at the end of the punch the props will stop, if it rotates beyond the control axis with zero prop control it is very difficult to recover. the self leveling does not deal with that so well.
When you were trying to take control and you said you "punched it" when trying to take control. Well would that not create a vortex with the increased speed of the props and actually drag you down quicker?
It's worth to buy this Drone in 2021 or there are better drones for the the same range of price?
I got arming on most right switch, and the modes on the second right 3 switch. Up is angle middle is horizon down is acro. You have to sign the aux channels to that particular switches. In the menu of the tx. And then sign that aux channels to the modes in betaflight.
4th hahaha great review man love the channel
Want to get into this sport/hobby. Looking for one I could build on. Would this be a great drone to start with? Or any I should look into?
Hey Dustin great review thanks. Do you know if I would be able to get my DX9 working with the x220s using the Spm4649t serial telemetry receiver? Cheers Jake
Do you need to buy the googels and the drone separately?
I had no idea! these things are mental!!!
I believe the SD card slot is for black box recording the flight data not the fpv feed.
I may buy a set of blades just to be sure, but I still gonna use the stock blades, I don't expect any more to let loose, there is no reason for them to.I will take her out again tomorrow, I think the winter really SUCKS. I end up with me head up me arse, it really effect's me bad winter.
Still go flying like on nice sunny days, but spring and summer way,way better.
Rob
Amazing Wow 👌👍👏👏👏👏
This is actually my first fpv drone and to be honest I don't care if I have to screw or tighten some stuff, what matters is that I own it
How fast do they go I want one the launch is so quick 🏌🏽♂️
Hey man hope you see this. Crashed my wizzard yesterday and the motors decided to start right up and not turn off had to unplug the battery. Any suggestions? Rebind it oh yes I'll be in Hawaii Monday lol
Very good video!
What did you think of the drone?
What is the transmission distance?
Impressive Review and Drone! Any updates so far?
Thank you for sharing
You need to enable the seperate 4 extra channels in your FlySky under SETUP I belive.
did you flip any switches at the top of the controller? Im having some troubles trying to start flying
Is this the best drone for me to get for my first decent drone if not what would be
Hey is the drone still ok like did it maybe Frye something or it’s still good cause I was thinking of getting it!
I’d recommend the RISE Vusion V2 or V1 over this. It’s RTF and it is very good. They are hard to find though.
Help?! TX is bound to Rx, everything works in betaflight (model rotation, TX controls, motors). The quad arms when switching the arm switch, but then the TX throttle doesn't have any effect of the quad. Motors spin up by themselves.
Good Shit, Subscribed baby
+Vahe Megerdoonian Thank you. Glad you enjoyed it 👍
Hey man! Love the video! I have been flying mavic for a few years and want to step it up. I’ve tried searching google but there is just too much info out there to keep the fpv game simple for beginners. Do you mind replying to this comment with some links for everything I would need from the receivers, transmitters, cables etc...... I can get a pair of fatsharks and be done needing goggles for a long time, but as far as connecting it all together with the drone and controller that this kit comes with, I don’t know what else I need. I want to try and run everything without a monitor if that’s at all possible. Thanks a lot man!!
Isnt the google screen flashing annoying if you fly? Want to get into this :) and is there any delay?
Hey Austin, first of all great video I've watch it to the end, I found out about this hobby lately and after I watched A LOT of fpv video, I felt like I need to get to this hobby, putting the goggles on gives you the feeling of flying and being up in the sky (and I like heights I've always wished to have wings 🤣) so I've already downloaded a simulator 2 weeks and I'm starting to get the hang of it, so I was looking through RUclips videos also in aliexpress and amazon to find the cheapest best fpv drone that I can get (I live in Morocco so investing more than 300usd is a big deal for me) I found some really cheap set for between 60-100euros but I guess they wont give me the feeling I'm looking for in this hobby. So maybe I've found the right one in your video, with 150euros I can get a decent fpv drone and a remote control, so I'm wondering here if you can recommend me a not expensive goggles that can record and don't harm my eyes?! Anyway keep up the good work 👌🏽👌🏽👌🏽✌🏼
Eachine EV800DM. A great starter kit is the Tinyhawk II RTF kit, and comes with everything you need. Just remember, this is a very expensive hobby, just because you can buy things doesn't mean you can afford it. It's also worth investing in decent gear. If you have questions do ask me. Best of luck!
@@nosky_ hey im also trying to get into fpv and im thinking about buying this drone is it good? do you have to tinker with it or can you just fly it out of the box ?