By the way thank you. Aapke fire fighting robot using Arduino mene apne final year engineering projects me banaya tha aur aapse what's app pe contact bhi kiya tha. Aapki madad se project to ban gaya tha. aur mera engineering pura hua Once again thank you.
@@ashutoshmishra1925 bhai mene project ka sara data delet mar diya. ab kuch nahi hai mere pass.jaha tak mujhe yaad hai, mene is video ke niche jo link hai wohi code istemaal kiya tha.koi change nahi kiya tha
nice work but pls I wanna know the Arduino was it programmed by u or it was an already programed one that u use.? ? am asking because a Friend told me to use an Arduino for project it must be programmed
First u need to download the code from the link in description, and paste it in arduino ide softwere ,then include librarys (servo.h and softwereserial) then click the compile, select the port and just click the upload .
@@Kiran-bl1bs Hi Kiran. I am so sorry to say this but I haven't yet get up to the coding bit (I need the PCB/ other structural system to do the code thing but I haven't yet receive the PCB). Are you also a first year uni student?
Sir i have a clarification that is in the circuit diagram you're using 3.7v*2=7.4(2 batteries at motor driver position) but i want to use in that place with three 3.7v=11v at motor driver place other than submersible pump position i can use 3.7v battery at pump...so please give me a suggestion for my problem...
Have you upload this project any website?I I saw that project a website which i unfortunately don't remember.If you upload that could you share that link.We wanna a project like that for a lesson.
Bro in flame sensor how to connect that black wire Black wire from right to front centre point.and black wire from left to leave out via hole is it correct bro
I have a doubt that if the system (computer) is off will the robot work please tell me I am going to make this for my science experiments project I ordered all the things so please tell me
I am planning to make a robot . Do you guys write your own code or copy from some references? If you do write your own how could I learn to write one by myself?
IR Sensor and Flame Sensor are two distinct types of sensors with different purposes. Here's a comparison to help you understand the differences: *IR Sensor (Infrared Sensor)* - Detects infrared radiation (heat, light) - Typically used for: - Proximity detection - Obstacle avoidance - Motion detection - Line following - Remote control signal reception - Output: Digital (0/1) or Analog (voltage) - Sensing Range: Varies (e.g., 2-50 cm) - Examples: VS1838B, TSOP4838, MLX90614 *Flame Sensor* - Detects infrared radiation specifically emitted by flames (1-10 μm wavelength) - Designed for fire detection and alarm systems - Typically used for: - Fire detection - Industrial automation - Security systems - Output: Digital (0/1) or Analog (voltage) - Sensing Range: Typically 1-5 meters (depending on sensor sensitivity) - Examples: MQ-135, YL-69, FL-06 Key differences: 1. Purpose: IR sensors detect general infrared radiation, while flame sensors focus specifically on flame detection. 2. Sensitivity: Flame sensors are more sensitive to infrared radiation emitted by flames. 3. Wavelength: Flame sensors are tuned to detect the specific wavelength range emitted by flames. 4. Range: Flame sensors typically have a longer detection range than IR sensors. What to do since you bought an IR sensor instead of a flame sensor? 1. Check the IR sensor's datasheet to see if it can detect flame-specific wavelengths (1-10 μm). 2. If possible, adjust the sensor's sensitivity or threshold to improve flame detection. 3. Consider using the IR sensor for other purposes (e.g., proximity detection, motion detection). 4. If flame detection is critical, purchase a dedicated flame sensor. Before using the IR sensor, ensure: 1. Understand its specifications and limitations. 2. Adjust the code and circuit accordingly. 3. Test the sensor thoroughly. If you're unsure or need help with implementation, provide more details about: 1. The IR sensor model you purchased. 2. Your project's requirements. 3. Your microcontroller/board (e.g., Arduino, Raspberry Pi). I'll assist you in adapting the IR sensor or recommend alternative solutions.
Hii bro does it works really we are ece students we are making this project please reply bro orelse our money willbe wasted. And please provide coding can we get msg and call plaz reply fast bro
Everything is ok but......the twist is robot goes only 1 straight direction...it not turns left or right properly... So this is disadvt. Fix it otherwise this project is ❤️👌
Sir, what should i do if i use L293D Motor Driver as the motor driver used here isnt available in my country. Pls help me. I was making this for my scince fair and later noticed the problem. Please help me sir. I would appreciate it.
i made this , but have an error with the project . its not working (i cant found the single relay module i have to fix it with 2combined relay module and motor driver with 3 ics, ) if i changed those components instead of yours i have to change the code also ?
Bro how to make it in such a way that when it detects fire from long range ,it will go to it and even if obstacle comes between it , it will dodge it and go to extinguish the fire
Looking at the robot it seems like the first thing to catch fire will be the robot itself😂😂
Lol😂
😂😂😂😂😂😂😂😂....
By the way thank you. Aapke fire fighting robot using Arduino mene apne final year engineering projects me banaya tha aur aapse what's app pe contact bhi kiya tha. Aapki madad se project to ban gaya tha. aur mera engineering pura hua
Once again thank you.
Bro I need report of your code please
@@ashutoshmishra1925 bhai mene project ka sara data delet mar diya. ab kuch nahi hai mere pass.jaha tak mujhe yaad hai, mene is video ke niche jo link hai wohi code istemaal kiya tha.koi change nahi kiya tha
@@ashutoshmishra1925 bro i delet all the data. but mene code me koi bhi change nahi kiya tha.
Theek bhai shukriya
😂hum bhi try karenge isi se
Bro I'm making this project at national level
He listen bro I need some help
To everyone who is confused why project didn't work sim800l is an heck of an device. So learn about it properly before u do this project
Good thoughts, make a docking system hooked up to ur water supply so it can auto refill, and make he robot itself water proof
This is a great project!! Well done..
But what is the use of relay in this ? Can you please elaborate it ?
for turning the water pump on
Yes
For those who have problem with pump just change High to low and low to high
STILLN SAME PROBLEM
Bro if I connect the pump to the battery it goes on ,it's not offing
L293 motor controler What is possible with it?
please reply 😪😪
Best Deatails video and mind-blowing
Hey can I use Arduino nano instead of Uno and will it work with the same code if i do so?
Please give me code
Yes
Will the motors work with out buck converter?? Pls reply
Great work 👌🏻
Can we make this tutorial as a reference for our capstone project?
Sure
@Hobby Project
Bo motor wheel thik se kam nahi kar raha he
Automatic run ho raha he
Ye problem motor driver ka he ya program ka
Did u got the solution bro?? Same thing is happening with me
Cashu Koduthu oru Puthiya Lighter Medikkadaa 😂
Excuse me sir, I want to ask. What application or software do you use to create wiring diagrams? Thank you🙏
Great work Sir 💗💗
Hello, will the SIM module work in any country? I'm in Canada, will the SIM module work with Canadian providers? Thanks!
Noo
Mind blowing project
nice work
but pls I wanna know the Arduino was it programmed by u or it was an already programed one that u use.? ?
am asking because a Friend told me to use an Arduino for project it must be programmed
First u need to download the code from the link in description, and paste it in arduino ide softwere ,then include librarys (servo.h and softwereserial) then click the compile, select the port and just click the upload .
@@jishnu3301please give code given link in expired and not working
download using chrome.
@@hobbyproject still file not supported showing
open using ide software or change its format from .ino to .text
Hey! The lights in flame sensor glows but it doesn't work. Can you please suggest any solution on this.
What App or website did you use for making your Schematic Diagram?
tinkercard
Star UML
Sir, can you please tell me what kind of water pump and nozzle did you used? Thank you!
5v Mini water pumb and for nozzle i have used pen tip.
@@hobbyproject
Hello sir,
Thank you so much for the information and have a lovely week ahead :)
@@Kiran-bl1bs Hi Kiran. I am so sorry to say this but I haven't yet get up to the coding bit (I need the PCB/ other structural system to do the code thing but I haven't yet receive the PCB). Are you also a first year uni student?
@@hobbyproject sir can you tell me is it remote controlled or automatic
automatic
Thanks for this, this is a nice project, please why did you use a seperate battery for the microcontroller and the pump
kudos 💖
can we use this idea for our thesis project sir?
yep
Sir I have done all things you did but my sim module doesn’t blink light also motor works automatically without any sense
same problem
Kudos 👌 ❤️❤️
Can you tell the Cost of all the required product
Hello, I need help with this project
Inbox
Is it okay if I don't change the potial using potentiometer????
Coud
7to Laike wa ishtariko fel9anat
Sir i have a clarification that is in the circuit diagram you're using 3.7v*2=7.4(2 batteries at motor driver position) but i want to use in that place with three 3.7v=11v at motor driver place other than submersible pump position i can use 3.7v battery at pump...so please give me a suggestion for my problem...
Do you have code
Yeah i have the code ihave downloaded not opened and opened using arduino app
Have you upload this project any website?I I saw that project a website which i unfortunately don't remember.If you upload that could you share that link.We wanna a project like that for a lesson.
cool❤️
What is the counterfeit if i dont have L293 motor driver? I only have L293d motor driver
Hey can you suggest me the all product name and where you get all these andprice to
Can I know for lm2596 which one u use? Step up or step down?
step down
The L293 is different from the other L293 is it still the same?
Bro Arduino uno model konsa hain?
how long and wide is the board you are working on?
Can I used GSM 900a instead? What changes I have to make for using 900a
Bro in flame sensor how to connect that black wire
Black wire from right to front centre point.and black wire from left to leave out via hole is it correct bro
@hobbyproject
I need a Suggestion
That Can I use L293D motor driver instead of L293?? Cuz, in BD that one is not available anymore
use L298.
@@hobbyprojectsir is the code and wire placement same for it? Or are there some Changes
I have a doubt that if the system (computer) is off will the robot work please tell me I am going to make this for my science experiments project I ordered all the things so please tell me
Where did you order the L293 motor driver?
@@Kiraraa-rb5if I bought it In the nearby science project shop.
Why don't you tell about the capacitor that you used with sim800l.That the green one .😡😡
Bro can you provide this project document for better understanding?
What is the A1, A2, B1, B2 port of motor driver for?
Which type of jumper wires are used in this....
Hello bro! If I use L293D motor driver would the result be the same? Or is there need to change code?
Hello can you share the answer with me?
Will u please send me the code of this project
@@gamingindustry893 tell your number iwill send code
Brother I dont know why but it is not working , the code which shared on the website is correct na ?
Where did you connect vcc and ground of flame sensors.please reply sir🥺
Mq ke sath connect broo
hlo bro please send the full code
Did you get the full code?
Did you get the full code?
Hello we have done the connection properly twice and trice but the project is not in working
.. can you help us@@ebrahemragb696
@@shraddhapagare274he itself has the same problem
I am planning to make a robot . Do you guys write your own code or copy from some references? If you do write your own how could I learn to write one by myself?
All sensors are not working? 😥
In circuit diagram where is the Mini breadboard picture connection
Im looking for a help, I bought a IR sensor instead of Flame sensor, does this will still work?
Well done
IR Sensor and Flame Sensor are two distinct types of sensors with different purposes. Here's a comparison to help you understand the differences:
*IR Sensor (Infrared Sensor)*
- Detects infrared radiation (heat, light)
- Typically used for:
- Proximity detection
- Obstacle avoidance
- Motion detection
- Line following
- Remote control signal reception
- Output: Digital (0/1) or Analog (voltage)
- Sensing Range: Varies (e.g., 2-50 cm)
- Examples: VS1838B, TSOP4838, MLX90614
*Flame Sensor*
- Detects infrared radiation specifically emitted by flames (1-10 μm wavelength)
- Designed for fire detection and alarm systems
- Typically used for:
- Fire detection
- Industrial automation
- Security systems
- Output: Digital (0/1) or Analog (voltage)
- Sensing Range: Typically 1-5 meters (depending on sensor sensitivity)
- Examples: MQ-135, YL-69, FL-06
Key differences:
1. Purpose: IR sensors detect general infrared radiation, while flame sensors focus specifically on flame detection.
2. Sensitivity: Flame sensors are more sensitive to infrared radiation emitted by flames.
3. Wavelength: Flame sensors are tuned to detect the specific wavelength range emitted by flames.
4. Range: Flame sensors typically have a longer detection range than IR sensors.
What to do since you bought an IR sensor instead of a flame sensor?
1. Check the IR sensor's datasheet to see if it can detect flame-specific wavelengths (1-10 μm).
2. If possible, adjust the sensor's sensitivity or threshold to improve flame detection.
3. Consider using the IR sensor for other purposes (e.g., proximity detection, motion detection).
4. If flame detection is critical, purchase a dedicated flame sensor.
Before using the IR sensor, ensure:
1. Understand its specifications and limitations.
2. Adjust the code and circuit accordingly.
3. Test the sensor thoroughly.
If you're unsure or need help with implementation, provide more details about:
1. The IR sensor model you purchased.
2. Your project's requirements.
3. Your microcontroller/board (e.g., Arduino, Raspberry Pi).
I'll assist you in adapting the IR sensor or recommend alternative solutions.
Oru lighter oke medikam puthiyathu😁🤣
Vellom veenathanu bhaii.
Really fun!
7:44 what is the yellow thing called?
Multimeter
Can you give us the components list?
Check the description
What if we dont use gears motor and we have to install in 1 palace is it possible
How many 18650 batteries are needed for the implementation, sir?
3
انت كفوووو ❤
13:47 Which water pump is this? Could anyone please share the link which we can purchase it from?
Approximate cost of this project?
Bro i didn't understand that servo wiring can you explain i done the project completely but servo wire only is there please reply ❤❤
We are so excited😅🎉❤
Bro can i use combination of two battery give more than 4.5 volt and set ot to 4.3volt using potentiometer
use lm2596 buck converter.
Thanks bro
Hai sir I have one doubt
bro relay ka kya kam tha agar output voltage 4.5 hi rakh na tah, utn toh arduino hi provide kar sakta hai???
plz explain
Hii bro does it works really we are ece students we are making this project please reply bro orelse our money willbe wasted. And please provide coding can we get msg and call plaz reply fast bro
9400496834 WhatsApp
why is water not coming out ,sir. please tell me
Bro flame sensors are detecting for sunlight also
Bro is your project working fine if yes then can u please help me
@@RohitKumar-zi8fvbro did you make it
@@pranjal669 1 year & 9 months ago
@@RohitKumar-zi8fv can I contact you I am going to make this project if I need any help i could use
Will the kit work before inserting sim?
Same problem
bro tumne jo required components name show karne keliye text animation use kiya hoo kaise kiya
Everything is ok but......the twist is robot goes only 1 straight direction...it not turns left or right properly...
So this is disadvt. Fix it otherwise this project is ❤️👌
Hii sir
I need complete details list of making this project
Hello! I don't understand how the pump is connected 14:07 How is connected to the extra battery and hiw with the circuit? Please response
See the circut
Excuse me, can i know how the flowchart is?? Im kinda not understand, thank you
Can we connect the wires to anywhere in the breadboard?? Pls reply
Bread board separated into two in one straight line is the single connection
Ok thanks man appreciate it!!
Ok
Can this device detect in 360 degrees??
Please reply
180°
@@hobbyproject can we make it in 360 degrees
Sir maine project same banaya.par kam nahi kar raha.plz help.
Can I use L298N Motor Driver for this
Sir, what should i do if i use L293D Motor Driver as the motor driver used here isnt available in my country. Pls help me. I was making this for my scince fair and later noticed the problem. Please help me sir. I would appreciate it.
update please, i have the same prob. l293 isnt available also in my country is it okay to use l293d?
Use L298N
Sir I've removed rx and tx pins of sim 800l but still the code is not uploading. Please reply🥺
Sir,can we get the spare parts in online ....
Yes.
Will sim800l support 4g Or 5g sim card? Please reply. 🥺
You can use any sim card that have a 2g band support.
Funciona el codigo y el diagrama?
Where can i buy L293 motor driver? Badly need right now
use L298 driver.
hey listen if i want to buy this then what is the cost my budget is less than 2500 rs
What is the sms rang of this project
Hi! how can I contact you regarding this project?
Yes i have this project with complete report
What is the rpm of the bo motor
Please help
Bro I want to add extra modification like depending upon the material, the type of extinguisher should be used like co2 /water/ foam
i made this , but have an error with the project . its not working (i cant found the single relay module i have to fix it with 2combined relay module and motor driver with 3 ics, ) if i changed those components instead of yours i have to change the code also ?
Code remains the same
Brother how close the car goes to the fire ? I mean is there any way to stop it ?
yes, u can set that by adjusting the delay function in code.
Bro how to make it in such a way that when it detects fire from long range ,it will go to it and even if obstacle comes between it , it will dodge it and go to extinguish the fire
do u use any app for getting call ? how do u get the call
Sim800l is used for sms and calls
I downloaded the code from google drive, but can't open the file. Help pls
Open it using Arduino ide softwere, or change it's format to .text
What we put instead of servo.h and softwareserail.h sir??
Open the IDE and click to the "Sketch" menu and then Include Library > Manage Libraries>search for servo and software serial library>install