I made a Deathclaw floating in a Cloning Vat
HTML-код
- Опубликовано: 1 июн 2024
- Join me as I make tomorrow's problems, today!
Hey! I got a website! AND IT'S FULL OF MERCH! www.tinynerdythings.com
Want to help the channel? / northoftheborder
Want to buy me a ko-fi? ko-fi.com/northoftheborder
Follow me on instagram! / northofthebordercraftw...
And of course, ya'll know I love me my likes and comments, and if you haven't subscribed yet, now is a great time to do it!
_____________________________________________________________________________________________________
Cosclay (my clay of choice)
www.cosclay.com/
Materials -- Full disclosure: I'm an Amazon affiliate, so any of the links you follow here will help support the channel. It doesn't cost you anything, but I get a little kickback for each purchase made through these links (I like to think of it as taking money right out of Jeff Bezos's pocket)!
Usually Used Materials:
UV Resin
(UK) amzn.to/3izI0wg
(USA) amzn.to/3wreX1b
(CAN) amzn.to/3yIxEiG
Mod Podge (Gloss)
(UK) amzn.to/3ta4BBY
(USA) amzn.to/3hTBPRY
(CAN) amzn.to/3khr2Uz
Mod Podge (Matte)
(UK) amzn.to/323CGrE
(USA) amzn.to/3hTBSx8
(CAN) amzn.to/3AS3XO6
Tacky Glue
(UK) amzn.to/3tkK9OQ
(USA) amzn.to/3hT1FoZ
(CAN) amzn.to/3hS6TBC
CA Glue (Super Glue)
(UK) amzn.to/3217k51
(USA) amzn.to/3ANpAin
(CAN) amzn.to/3AR4lMs
Armature Wire
(UK) amzn.to/3s1rHtm
(USA) amzn.to/3yG1zIc
(CAN) amzn.to/3jYxcZs
Clay
(UK) amzn.to/2R5rWXL
(USA) amzn.to/3xw4bIl
(CAN) amzn.to/3hXe7Eo
Translucent Clay
(UK) amzn.to/3ajoM8P
(USA) amzn.to/3ahOURJ
(CAN) amzn.to/3v6NG5r
Paints
(UK) amzn.to/3eLsona
(USA) amzn.to/3r1eemq
(CAN) amzn.to/3hUgWWP
XPS Foam
(UK) amzn.to/3wVh2n7
(USA) amzn.to/2Vu85DF
(CAN) amzn.to/3e6dDL3
My Tools:
Sculpting Tools
(UK) amzn.to/3xw4uD9
(USA) amzn.to/36tQjCO
(CAN) amzn.to/3AMowvd
Silicon Tools
(UK) amzn.to/36vJz7n
(USA) amzn.to/3yD3mh4
(CAN) amzn.to/2UBf3Gy
Stabbing Tools
(UK) amzn.to/36vJLn7
(USA) amzn.to/3r1fJky
(CAN) amzn.to/3r0wdcE
Pasta Maker
(UK) amzn.to/3wABzwd
( - USA) amzn.to/3ANETHH
(CAN) amzn.to/3hvhGT0
Airbrush
(UK) amzn.to/3r8wqe0
(USA) amzn.to/3r2w34k
(CAN) amzn.to/3wCxlEI
Airbrush Booth
(UK) amzn.to/3l95Xfi
(USA) amzn.to/3BZfn32
(CAN) amzn.to/3fcCXQ0
Compressor
(UK) amzn.to/3wqIiZK
(USA) amzn.to/3AJKtet
(CAN) amzn.to/3r17jth
My Filming Equipment:
Camera
(UK) amzn.to/3k3LLuL
(USA) amzn.to/3hvhALd
(CAN) amzn.to/3hvi2ZQ
Lens
(UK) amzn.to/3wxJ9YL
(USA) amzn.to/3xAGezU
(CAN) amzn.to/3yK1kvC
Microphone
(UK) amzn.to/3htJqYg
(USA) amzn.to/3e5bGhJ
(CAN) amzn.to/36pvf02
Mount
(UK) amzn.to/3yOnrBn
(USA) amzn.to/3e6tXLQ
(CAN) amzn.to/3xyrqSj
_____________________________________________________________________________________________________
Chapters
00:00 - Bethesda and Amazon? What can go wrong!?
00:19 - Lumpy Torso
01:28 - Accidental Planet of the Apes
02:20 - Getting Horny
03:05 - Legs for Days
04:05 - Arms for Weeks
04:35 - Backside for Months
05:46 - Browncoating
06:50 - Some regrets...
07:25 - Capitalization Jokes FTW
08:40 - FLAWLESS
08:50 - Science* Box
09:52 - It was boring anyways
11:30 - I don't know how electronics work
13:00 - Glamour Shots
_____________________________________________________________________________________________________
#fallout #deathclaw #resin 
Хобби
The yellow leaching into the resin actually looks awesome in my opinion.
I think so too, it makes look like its almost glowing a little in a sense
@@xX_Mentallyill_Xx or it looks like the weird radiation stink effect you get in parts of fallout 4
@@chalkietigger4650yeah like that one cabin with the ghoul doctor in it
@@chalkietigger4650 i dont actually play fallout so i have no idea what you're babbling about
agree
Could you make realistic Tom and Jerry?
Amazing idea!
AWESOME
I love that, with a wall between them with a mouse hole
Yeess!
You could also make Spike, Tom, and Jerry hitting each other. Always a classic.
The leeching actually does look good, like the chamber has been left sitting so long it's starting to fail. Whoever stumbles into that science room had best step lightly
FR
*"Pro Tip"* If you ever want to make a masterpiece but don't have the skills to do so, just squish the ever living snot out of a block of clay and you get a "one of a kind" Deathclaw!
Gotta start somewhere, why not just have fun in making something instead of trying to be perfect!
@@panjack_feel that that in art and exercise, find sumn you like making or doing and enjoy it, ya stick to it more and youll remember it as sumn that you have fun with and can become a stress relief
He’s just a little special
This project turned out nice and smooth. A fallout vault boy with power armor or fat man make a nice diorama.
Why not both? Or all? "Giant" Vault Boy statue with a power armor wearing, Fat Man wielding survivor looking all heroic with one foot on a pile of dead Ghouls and Raiders? Or one foot on the back of a dead Deathclaw.
I thought of a suit if power armor then remembered how long the space marine took and he's got roughly 1/10 the finicky little details...
@northoftheborder that's half the fun of it!
1:43 @@NorthoftheBorder
The yellow leaching out adds to it, I'd say. Like it's dead and slowly decomposing, it's not frozen in time.
Babs is gorgeous, darling. Her creepy science bath looks a little grungy though tbh. Really cool build as usual!
Rarity?? That you??
Ah yay! Yet another cursed creation for us to enjoy!
Side note,
You have truly inspired me in my paintings Adam, my imagination is more cursed than ever before and I'm very happy with the resulting paintings.
👍
Yeah he brought me back into art and I've been much happier
I think the bleeding off of the colors actually works!
Nice job!
It just works
I love your channel and I'm from Poland. I'm kinda glad these acrylic sheets don't contain any polish 😂
Or any polish remover 🤔
That melting color looks badass though, it works super well with the alien vat energy. You could take advantage of that effect in future builds!
The color leach actually looks cool, like her aura or something.
Gives of kind of an aura
I think it looks like it's old and disintegrating or a layer of skin has sort of flaked away.
@@steprockmedia I was thinking something similar. I've seen very old items in formaldehyde that had a similar subtle cloudy look around them as the objects start to dissolve in the liquid.
My stress levels when you do resin are so high. Seeing you put this beautiful creation into a mould with “resin disaster” foreshadowing is so terrifying 😂
Oh my fucking god
I’ve been a fallout fan my whole goddamn life and this, THIS is one of the COOLEST models I have ever seen, this thing is beautiful!
This is one of your best sculptures yet when it comes to the clay form you made. That is such a good anatomically relaxed gesture with a very impressive amount of detail and visual interest. It's like high end production figure quality.
Your ability do do something like this every week is astounding, just be careful not to overwork yourself.
Fallout has a special place in my heart so I was so stoked to see a deathclaw! It turned out amazing, as always! 🔥🔥🔥
Haha 111 likes
Things like the subtle pause at 2:24 is why I love your videos lol
It’s called the end of a sentence.
@@GranttheGreat_BOTTOM_TEXT I’m crying 😂
@@GranttheGreat_BOTTOM_TEXTthe pause is just slightly longer than normal, it’s not just the end of a sentence
Perhaps the end of an era...
It's like, ok what is gonna go wrong now? Kind of pause
the yellow wash leeching into the resin looks way better in my opinion.. looks like radiation emitting from her skin. Deathclaws are usually found in the more radioactive areas of the world, so to me it's like the stars aligned for this build. 🔥
The utter surprise when I saw that you sculpted a deathclaw made me so happy!!! Fallout is one of my favorite game series!!
Imagine what an honor it would be to become a tiny nerdy thing
A horror, and yet an honor 😌
IDK, I was that in middle school and it sure didn't feel like an honor.
I would love to see a xenomorph or queen xenomorph sculpture. I think you could do some really cool lighting effects with the flamethrowers! Keep up the good work Adam👍
Me being a gen Alpha kid, I have nostalgia for Fallout 4 and Skyrim because my dad would play them. It's great that they're coming out with a new show, and your model looks terrific!
All it took was 1 video and I’ve been hooked ever since. KEEP IT UP !!!!!
I love how you make everything without drawing it out 😮💨
THATS PURE TALENT !!!!
You could say Adam "killed it" with this deathclaw
Wrixchanger3985🔛🔝
Wasn’t Adam.
The yellow leaching in looks really cool with the backstory of the piece! Great work, Adam!
Adam posting on my birthday was the best gift I could have asked for! Amazing work, as always. Can't wait for whatever nightmares come next!
Your painting skills are seriously improving. I know this is more of a sculpting/comedy channel, but there's no discounting your paint job on Babs. Top shelf, old bean!
the discoloration is kinda cool
Oh man, how much I wish you did some obscure Ben 10 aliens!
Oh ya, be super cool. My daughter is 19 now, but when she was about the ages of 6-10, Ben 10 was her thing, and green was the best colour ever. Be quite nostalgic 😌 for me, and I love to send her those videos 😅.
I eat egg
Yeeees! Fallout, particularly 4, is very special to me (pun not intended). I've been waiting for Adam to make a Fallout creation!
im so proud of how far youve come throughout the years. ive been watching you since i was a kid and its been so amazing watching you make these projects ! you inspire me man
BABS? I love her so much!
Fallout is taking everything just as atom intended
The yellow in the vat actually looks great, and makes it look more like it would in a fallout game, such as the vats in the FEV lab. Overall this is definitely a 10/10
Looks like you wired the led's in series, for low voltage you should wire in parallel
An led generally runs on 2.5-3v, though some work on lower volts, i'd say yu were lucky to get yours to light, especially as you also had resistors in series
Deathclaws!!! Awesome!
The discoloration /bleeding of the color works in this particular scenario if you ask me. Like Babs have been in that chamber so long the skin is slowly started to decompose because of the old, faulty tech not able to work any more and keep her stabilised.
Oh and that corner with the resin mark? Can't you fix it with some UV resin carefully poured into that crevice?
Sorry for any mistakes, not my first language, love your videos!
this dude is my favorite clay person maker, cause of how accurate he is and how the clay figurines look so similar to the games and stuff they come from.
That last shot of your beautiful deathclaw floating with all the lights out, and only the brightest parts of its paint job visible, made me think of something that could be pretty sick. You could make a project similar to this one, but give the monster markings using fluorescent paint rather than normal paint. Then, you could light the chamber using a blacklight (or a blacklight under some kind of grating/panel with holes in it to only let some of the blacklight shine through.) In normal conditions, you would just see this eerie, dark sea monster/lab experiment floating in the water...but when you turn on the blacklights at the bottom (and/or top) of the tank, the creature suddenly lights up with exotic neon markings. There are some fish that look like neon in real life, so just imagine what a monster with neon patterning could look like! Hats off to you! This video is very inspiring!
I got a challenge, but obscure but in Darksiders 2, when you're hit by an ice enemy you get imbedded in big shards of ice, it's cool visually, maybe you can make a model based on that, it would be challenging to make Death and the ice look like ice too
Darksiders is such a cool series
@@AedanTheGrey it really is, I'm going for the platinum on 3 now
I think a good idea is to do either something from ultrakill or pyro from tf2
(Both my favourite games)
I like the crack in the resin cast, adds to the fact that babs could emerge at any second out of this ancient test facility. Definitely plays into the wear and tear very well.
I keep saying it but you keep getting better at sculpting. Babs turned out so good and it was so much fun watching her come together. :)
She's so pretty 🥺
The lack of Polish is a true tragedy
the physical reaction i got from you sanding i love everything you make though you always do a fantastic job and really give confidence for a hobby that can initially seem super overwhelming
i agree with the other comments, the leaching actually became a happy accident yielding an unintended satisfying effect. you may want to consider using strong wires made to look like those monitoring cords into the creature for when you make another floating creation instead of the nylon.
Kick ass as always!!
Now, I have been thinking. Instead of resin for projects like this, how about using a transparent container and actual liquid inside? Not water, that is too runny and too leaky, but perhaps something thicker like a thicker mineral/parafin oil, or even thicker like clear corn syrup, so it is easier to make it leak proof. I suggest those two because they are cheap and easy to get, they don't really go bad (though you can always replace if shit happens), and their index of refraction is similar to that of fishing lines and acrylic iirc, so there is a good chance that whichever you use to support the model inside the liquid would become effectively invisible.
Then he needs to deal with dehydration as the container would need to be airtight. Glycerine might work as a liquid, but that might just create too many other issues to overcome.
@@MisterGames What other issues are uou think of, besides needing to either seal it or make it refillable, which are both not much of a challenge?
@@louisvictor3473 while making air tight and or needing to refill it are not deal breakers by themselves, they add extra maintenance to the thing. Sure, doing this for one or two is no biggie. But if you have to refill 15 or 20 of them, it begins to be an ongoing chore for what was a done and dusted project. Also, as photoowl time-lapse channel shows, sugar liquids always get mold on them.
@@MisterGames You're talking as if you have to refill it frequently, which you wouldn't, it is the backup plan. How often does a lava lamp needs refilling? How long until a sealed bottle of corn syrup or glycerene or alcohol gel, or mineral oil, etc visibly go down in level? Even a terrarium doesn't require its water refilled, and that is literally just plain water. That is why you seal it, so the slightly raised pressure created by any evaporation prevents furter evaporation, as well as ensuring the liquid stays in so that when it cools down and condescenses it just joins back up.
You also seem to be thinking of sugary liquids that are mostly water rather than the other way around, and kept in an improperly sealed container that allows too much fresh oxygen in. Molds are obligated aerobes, so a completely filled and sealed container would suffocate it, as well the absurdly high concentration of sugar that is too much for them to survive in. And of course, you could use a non sugary liquid like mineral oils, clear neutral liquid dish soap, etc.
I really hope you continue the terraria bosses! Absolutely loved that series.
I enjoy all of your videos and in my opinion your brilliant. I'm also glad to see that your making your sculptures as naturally as possible....I find 3D printing awesome. Yet alot of artists seem to be relying on them more often than not. I appreciate your work immensely and applaud your talent.
One day he'll have a perfect resin project that doesn't go away in any way, one day
I see Adam is a Deathclaw enjoyer too 👌
“Tampering may lead to loss of life” bro is more honest that my mom
I’m sad to say I don’t know Fallout but this is incredible. Almost as incredible as my TERRY PLUSH I JUST GOT! Thanks Adam for giving us all a little Terry in our lives. May he continue to make appearances for a long time.
I usually hate those imperfections, but your presentation makes me love it
Adam is such a glutton for punishment doing even more resin projects 😅
You can use that color leeching effect for other things like radiation leaking into somewhere it shouldn't or algae build up on rocks underwater.
You know Adam, I just really wanted to thank you.
You may not realize this, all of it is obviously you just cracking jokes, but the way you criticize yourself and your lack of planning, incompetence, doing stuff just however you feel like doing, not how it should be etc is really helping with my weird perfectionism that's causing me a lot of anxiety while doing art and basically makes me hate doing what I am doing. Seeing how you just... do stuff without much care and getting these absolutely incredible results is seriously helping me relax and just go with the flow, your content is actually making me a better artist despite the medium we're both using being completely different. You're kinda like... Bob Ross of sculpting on crack.
So yeah, thank you!
I love how he just gets into the video instead of blabbing about what he's going to do👍
looking forward to the Cazadores and doctor Borous, anything big MT related would be killer though
Soonest I've come to one of these. I have mixed feelings about both the upcoming show and what the journey of watching Adam's video will do to my psyche 😂
“To give her a bit more color and to really highlight those gaps, I’ll highlight those gaps with a bit more color” had me dying 😂
Very cool. You make sculpting look effortless.
This has to be one of your best works yet 😊
Hey
Hi
Onion cultists.
Why…^^^
Lumpy chicken Cobb
I just have to add on to what everyone else is saying: the wash bleeding into the resin actually looks really cool. I had such high stress at first but the finished project looks amazing, as always. Keep it up!
watching this after 3 days of hiking and camping is cool
hey adam! i absolutely love your channel! you’ve inspired me to make characters that you make!
God, the deathclaw shape is just the Perfect Shape. You captured it so well lol, cheers!
Fallout is something special to me as it was a way to connect better with my mom since she loves the game. We were going to watch the show together when it came out ❤ I jumped in joy when I saw one of my favorite creators making one of my favorite creatures🎉
please do more resin art 🙏
I’ve been subscribed to this channel for a while and I absolutely love your videos! Funny and super impressive, keep up the awesome work :)
This looked great! But if I could give one suggestion I would recommend not forgetting to clear coat.
Babs is AMAZING, i'm always blown away by your talent! (based on the thumbnail I would have guessed it was a real Bethesta 3D print that you added resin to, but WOW!!!)
Cool idea ima start watching
I feel like your sculpting skills improve each project, insane work again dude!
I have such a soft spot for Deathclaws and Babs is no exception to the rule. Look at that cutie !
Question: If you pour the resin halfway up, let it set, then pour the rest of the resin, will it create a visible seem?
I ask because if it doesn't create a seem, then you could do that, cut away the wire supports, and the bottom dried resin would hold the model up while the top resin cures. Then there would be no wires in the final model.
It could work yes but any inpuritues like dust particles even hair could cause it to have a seem
From what i've seen from other creators, its does create a little bit of a seam and might result in the resin having bubbles or other imperfections.
The paint leeching is just her radiation floating around her.
This rules! Honestly the bleeding color works, suggests she's been in there a while and maybe the systems are starting to fail and she's beginning to decay a little
i have loved your channel for a loooong time and making a deathclaw has just made me love your channel even more. this is amazing. thank you.
I thought that said _Deathstar_ and I was so confused
hell yeah.
maybe try making the master?
itd be call
Or centaur fallout 1
Awesome job!!! ❤️❤️❤️👍🏻👍🏻👍🏻
Glad to have you back!!!
Your transitions are so clean and satisfying. They honestly make me so happy.
Who’s here in 2025
He made this in 2025
Bro came from the future
@@Oliverdixon14 no he made this in 2035
Ummmm, are we in the future now?????
No he made this in 2029
Could you please learn that you don't need to pour all the resin at once? You can half fill the mold with the model supported and then remove the supports when the bottom is cured.
Adam is like Christmas, he makes us all feel warm and fuzzy inside.
I’d say the leeching is a classic example of a happy accident. It gives Babs a sort of radioactive aura. Nicely done overall!
I absolutley love how it look's like, in the dark and when you can see all the details of the chamber!
Beautiful imperfections make art more valuable. They add character, embrace it 💙
I love how Adam's commentary is like trying to reach a word count on an essay lol, it's so amusing 😂
Adam the sculpting is amazing on this, and it turned out awesome
It has been a while since you lastly made a tiny nerdy thing instead of a medium monstrous mess.
Nicely done, man :D
Absolutely gives me an idea for something you'd see in a theoretical "Vault 001" in a new Fallout game.
Since you've entered the world of Fallout with a well done deathclaw, I now make my second request for The Master.
Your “mistake” actually adds to your sculpture. Babs looks like she died in the cloning vat from radiation poisoning. The yellow leakage just looks like a cool little effect.
After SO many hours of foraging through the wastelands, running from or zeroing in on deathclaws, it was kind of surreal to see one created from clay.
Really awesome deathclaw! It turned out beautifully. My deathclaw fell over in the oven and broke a few claws.
Ive been watching your videos with my daughter for a few months now. And because of you, she was inspired to make a M&M eating a small human from clay.