Homemade 50cc Trimmer SKATEBOARD !?
HTML-код
- Опубликовано: 8 апр 2022
- Homemade TRIMMER DRILL !?
• Homemade TRIMMER DRILL !?
.
Kožul (Max Tools) : www.kozul.hr/
.
Einhell: www.einhell.hr/
.
Unior Tools: www.unior.com/
.
My INSTAGRAM: / doctor_ds_youtube
.
.
.
Photo equipment
-SONY A7III
-SONY 18-70
-SONY 18-200
-2x Nikon d3200
-Nikor 18-55
-DJI Ronin SC
-RODE
-RODE NT-USB
-GoPro 7 silver
.
Za poslovne upite: dadoskrbo16@gmail.com
For business inquiries : dadoskrbo16@gmail.com 
Авто/Мото
I see a bunch of comments about turning the engine and other options to get it to run the right way, but a simpler solution is what we do with machine belts. Just make the chain into a figure 8. turns the other way and super easy. You might need a guard, but it works.
Hi brother
If you turned the engine 180 degrees with the sprocket to the right, the problem would be solved.
I love how you have beautiful edits of you cutting and tooling, and I love that you left in your mistake, instead of editing it out. Respect.
It look more fancy with one wheel in front💯
AUSOME!!!!!! Good job!💪💪💪
Всё классно👍! И новые инструменты супер. Следующий проект сделай переднеприводный двух колёсный самокат. И протестируйте его в лесу по бездорожью. 🤏✌👍. На таких колёсах должно быть супер!
yes, like Harry Burford just said, turn the rear wheel around so the sprocket is on the other side, and turn the engine around too so the sprocket is on the "right" side of the board.
Came to say the same thing
Bolje, jos malo i na starim stazama slave si, imas like
svaka čast majstore, jednostavno smišljeno, posebno skretanje, a funkcionira
I like the way you made the front axle and wheels ect.and bushing..
Hey dr ds, since we are your loyal fans from all over the world....how about you pay homage by signing our country's names on your builds....your loya fan from Kenya 🇰🇪
Am also a fan from KENYA 🇰🇪🇰🇪
Svaka čast majstore!
Sve pohvale...
Bravo!
Radical rig. My favorite part is the doctor coat.
Hahaha dobro prevozno vozilo samo nemoj jako stiskati kočnicu da nebu bilo red bull daje ti krila
Odličan waw tako da se spasite iscrpljujuće šetnje od svog doma do svoje radionice ili gdje god želite ići, dobra alternativa
Congratulations, young man. You are a very intelligent person. Between the ideas, workmanship, mistakes, and last but not least by your sense of humour shown in picking up subtle and tacit moves with the photography and the instant timing at which you depict it in order to accent your determination, as for example at 20:12.
Well done and all the best.
It's very nice that you have been working
Dr. Mad Max mini! Nicht schlecht!
Nice job . Made with the plans in your head. Imagination.
Could you do a build for a motorised wheelbarrow . If you do one that can be sold in a kit then you will probably make a few million bucks.
Cheers .😎
an excellent job, well done, yes, I would add something very small, 2 lills to the legs or two irons so that it does not fall for balance
٠😃😃
Ya need to turn your motor around so you steer with 2 wheels. More stable and no exhaust in yo face. Like your stuff brother and I love that you don't talk. Keep up the good work 💯
Odlično, svaka ti čast!! 👏👏👏👏
Nice little Fardier de Cugnot
If you look up a pivot cup on skateboard trucks it will help you tremendously
Where you attach the front axle like a skateboard truck
On an actual board there is a little cup there so your board does not sway back and forth so hard
Doing this with let you achieve full speed more safely and harder for you to turn by shifting your weight forward and back
That clutch is meant to put the engine facing the other way, since the engine turns counter clockwise the gear box makes it go the other way, so the engine goes mounted with the carb facing forward
Odličan projekt svaka čast samo naprijed
Hey, try to switch the engine pozition, and the brake disc tot make it run in the opoziție direction
as always, brilliant
Gordon from Ireland
Ajme ,Kralj 😂❤️🔥👍👏
Great job.. the only thing that you have to do is turn the engine around and wheel and sprocket and it will be in the rear... 😁
Super ideja i posao🙂
this looks like a lot of fun! i built something similar. you will want the engine mounted to a 'plate' separate from the frame. Then slotted holes in the plate front to rear. Then you can fine-tune the chain adjustment. & perhaps turn the engine & wheel around to the other side so it goes forward & it will be more stable. good luck! liked & already subscribed
Wow, it turn so nicely. Its a shame we didn't see it in the video.
brate, svaka ti čast!
Grande Doc!!!
Great odlican projekat
WOW!
Have you considered putting a handle on it. It would connect your upper body, like on a Segway.
Just a thought, fun content!
Cool build man
Big fan from Poland 😁
rear wheel steering is where board wobble comes from. get that motor spun round and ride it like you intended. also go with a decent plywood and you can cut that deck thicknes down by 75%. weight is not your friend
Great job dear friend wish you all the best❤
Awesome !!
Nice project!
SVAKA CAST EXELEND WTF SUPERRRRRR
Sve pohvale🏅👍👏👏👏👏👏
Dobro je ispalo 🍻
amigo.beauiful shots- catch you later.
flip the motor, sprocket on the other side, reverse direction
Kad vidiš kako drugi rade slične projekte tačno se vidi da je ovaj s Balkana.
ok so love the concept except the backwards part...also alil wobbly so could you make me one the right way and what would you charge??
Happy 2m
Svaka čast.
great job! and thanks for not playing jungle music
Very heard work great 👍
👏👏👏👨🏭
Da je malo Jace pa aj🛠️⚒️💪👌👍
To jest bardzo dobra robota
Congratulations for the 2 million followers you deserve more if God wills for the 10 million
Lux robota
I think it's better with the single wheel in the front. But all you would have to do is turn the engine and drive sprocket 180degrees to the other side of the skate
Svaka čast odličan video samo ti predlažem da složiš neko sjedalo da ti bude lakše vozit
to onda nebi bio skejtbord već neš drugo
to onda nebi bio skejtbord već neš drugo
very nice , you know you should think about putting epoxey resien on it with some cool design
Salut 👍✌🏻😎✌🏻🇫🇷🇧🇷 Cool 👍
Svaka cast
Genius.
I owned one just like this 49cc 2stroke it was fun going uphill in the mean streets of Wellington.. All the power was one ine wheel and made for mad speed wobbles when i let off the gas... Ended up going into the back of a parked van and broke my shoulder. While i wasnt using in crackheads stole it....
So perfekt
Buen video.
No basta con saber.
También hay que tener las herramientas y la platica.
Crazy Idea
Cestitam na dva miliona pratilaca
I'm not sure the gearing is right... most of the time, you can hear the engine is 4-stroking and running at a pretty low RPM, meaning the clutch is probably slipping. and hasn't fully engaged. I think you could get better performance by choosing a smaller sprocket on the engine side! Great project nonetheless! :)
Nice 👍
Turm motor and sprocket on the opposite side and it will work just fine
2M subs coming soon
😍
Hola bacán me encantó tu mono ciclo sólo para que te camine al derecho sólo borra el motor hacia el otro lado
Мастеря скейт ,не забудьте построить туалет и будку для енота...😮😢😮
It's still a lot cooler than an electric scooter 👍
Gool 🔥🔥🔥
Superrrr
You dont make small gearbox for front drive?
Buenas noches Bro solo jira el motor y cambia el disco de freno acia donde esta la estrella de transmisión para que ande como tu querías de principio
there is a huge diy electric skateboard community. i built a 35mph board with 25 miles of range. you should try it.
Good
you have to try to start the engine from the opposite direction so that he can go forward
Extra video
I would put a handle on it for better stability and a place to mount the gas and break leavers
should clean your metal a little more on the edges. mig really likes clean metal.
Thanks
nice
Use an Extra Gear? Wind the pull cord in the opposite direction, or use a drill to start it? I heard this works on two-stroke motors, but I haven't tested it. I think it is probably easier to steer "backwards": I can ride a tricycle, but I cannot ride a skateboard.
it does because the motor / engine can run either way
Muito bom...
Super 👍👍👍👍💯💯💯
Wooou pralatan sangat bagus 👍
Fajny film!!!!!!!!!!
❤
Very Nice 🤙🤙🤙
Awesme
nice you think i can do it with chainsaw engine ? has 18.000 rpm i think dont know how mutch cc
2:05 I would put in fresh fuel because it gets unmixed and can cause a piston seizure