Great budget upgrade Troy. I've been eyeing the Ridgerock for quite a while. I may have to ask Santa for one. I just noticed that you're closing in on 40K subs. Well deserved considering all you do for the RC hobby. Many thanks.
Thanks Rick for the kind words. There are a lot of crazy deals going on with Redcat right now through 11/3....you might want to check them out before going to the Ridgerock. You can get more car for your $$$!
I cut off my bed and hood to the windshield almost, and the whole rear up to the cage. It's a rolling cab painted authentic camo paint. 6 months nothing broken. 1x9 wheels and mud terrains. It just works perfect.
I ended up dropping quite a bit of money into a Ridgerock before just upgrading to a more hobby level RC. It's on proline Swampers, Axial 380 dynamite motors(proper fitting pinion gears were hard to find), 25kg Zooskay servos, homemade aluminum lower links, Jconcepts creep body, and 3s lipo. Still have the Ridgerock for when the grandkids come over though. Gives me enough time to order parts and repair it before the next time they make it over. Parts are cheap through Redcat(parent company)
Haha I’ve been spoiled by Axials, Elements and a Trx-4, the Danshee is a pet project for me as an excuse for the “$100” crawler build 😂 It’s always fun to see the Danshee flexing 90 degrees!
I didn't like the body or tires and wheels, everything else is fine, Next one for me is Redcat Gen 7 or 8 crawler. I've seen them online at least for $229 or allot more. Plus $70 shipping probably.Seen one crawl, I want one. Something else good around $300?
@@Mark-qv4bn I have actually gone hog wild on RC crawlers over the last year and have tried many different ones out. If you want to be around the $300 mark, I suggest the Element Enduro SE. for the money it is really a good truck. You will likely want to change out the speed control (ESC) to a Hobbywing 1080 after you have driven it for a while, but it will work even in stock form
I ordered a Betu 35kg servo for my Tekno. It was supposed to be here yesterday but now they said Monday. Amazon is a good place to find a bunch of budget friendly stuff for rc cars. My 4wd, 2wd, and my son's RMX all Hobby Wing clone setups. 👍
Very worthwhile and very effective upgrade Troy! Totally make this a Budget rock crawling sleeper! Great tutorial!💯👊🏼⭐️😁 Enjoy the rest of your weekend!🙌🏽
Great info here Troy. I recently got a deal on a nice set of 2.2’s for Grayson’s but they are a bit heavier and made the steering lag even more. He’s also got a light bar to install so the tipping the tray is a great tip for accessing the electronics.. I happen to have a pair of 35kg injora servos, might have to donate them to him 😁
I was really hesitant to add more rotational weight in the tires and wheels. Seems like the ESC and motors on this are a little underpowered. How has it done?
@@RoadsideRCThat's a fair point. A part from tires/ wheels/ and servos, which is basically just this video again lol, I'd like to see upgraded metal steering linkage and heavier portal covers. Merry Christmas, Troy!
awesome but i will wait for my stick servos to die before changing. this crawler is stock already very capable, with good tires and new servos is amazing!
@@RoadsideRC yes i have the parts but mine still has the servo savers. I only use it with my kid at home traxks (pilows, cardboard boxes) or light trails at park so good servos are not a requirement. Also, have two 1/16 bashers that take most of my rc time :)
@@RoadsideRC finally ordered a 25kg servo. Just got me thinking that with no way of setting endpoints i may force the steering knuckls and brake parts often...heard of many cases...
i cant use the metal servo horn provided with the new servo because its too long and rubs the steering linkage...i have ti use stock one and loose a few degrees of steering...
Is it really different than I show in this video? I believe mine touched some, but not enough to worry about. Also - you can always grind off the very tip of the servo horn to help with clearance.
@@RoadsideRC mine seems identically to yours....yes, i will probably have to grind 2 or 3mm but dont have a grinder, maybe sime patience with sand paper would do...
Hi, you mentioned running a 3S lipo. Can the electronics handle that voltage or did you mean 2S? I cannot find anything on the electric specifications. Keep up the great how to videos!
I have the same servos on my son's and I still have a lot more travel after the steering stops. It's really flexing the steering links. So I had to use the stock plastic servo horns. I'm just wondering how yours seems to work just fine. Any ideas?
@@RoadsideRC I did and even with that hole there is too much throw. There is room above that hole, I thought about drilling another hole and tapping it.
Great budget upgrade Troy. I've been eyeing the Ridgerock for quite a while. I may have to ask Santa for one. I just noticed that you're closing in on 40K subs. Well deserved considering all you do for the RC hobby. Many thanks.
Thanks Rick for the kind words.
There are a lot of crazy deals going on with Redcat right now through 11/3....you might want to check them out before going to the Ridgerock. You can get more car for your $$$!
I cut off my bed and hood to the windshield almost, and the whole rear up to the cage. It's a rolling cab painted authentic camo paint. 6 months nothing broken. 1x9 wheels and mud terrains. It just works perfect.
Awesome! Glad to hear it is working great for you!
I ended up dropping quite a bit of money into a Ridgerock before just upgrading to a more hobby level RC. It's on proline Swampers, Axial 380 dynamite motors(proper fitting pinion gears were hard to find), 25kg Zooskay servos, homemade aluminum lower links, Jconcepts creep body, and 3s lipo. Still have the Ridgerock for when the grandkids come over though. Gives me enough time to order parts and repair it before the next time they make it over. Parts are cheap through Redcat(parent company)
I agree, it is a great starter, but I wouldn't recommend folks dump too much $$ into it.
Haha I’ve been spoiled by Axials, Elements and a Trx-4, the Danshee is a pet project for me as an excuse for the “$100” crawler build 😂 It’s always fun to see the Danshee flexing 90 degrees!
I didn't like the body or tires and wheels, everything else is fine, Next one for me is Redcat Gen 7 or 8 crawler. I've seen them online at least for $229 or allot more. Plus $70 shipping probably.Seen one crawl, I want one. Something else good around $300?
@@Mark-qv4bn I have actually gone hog wild on RC crawlers over the last year and have tried many different ones out. If you want to be around the $300 mark, I suggest the Element Enduro SE. for the money it is really a good truck. You will likely want to change out the speed control (ESC) to a Hobbywing 1080 after you have driven it for a while, but it will work even in stock form
Cool backyard course 🔥👍🏽💯💪🏾
Thanks 👍
I ordered a Betu 35kg servo for my Tekno. It was supposed to be here yesterday but now they said Monday. Amazon is a good place to find a bunch of budget friendly stuff for rc cars. My 4wd, 2wd, and my son's RMX all Hobby Wing clone setups. 👍
Very worthwhile and very effective upgrade Troy! Totally make this a Budget rock crawling sleeper! Great tutorial!💯👊🏼⭐️😁
Enjoy the rest of your weekend!🙌🏽
Thanks for the support!
Have a good weekend!
Side note, I love the ZOSKAY servos. Best value for the money out there. I’m putting the 35kg in the clodbuster we’re gonna be building in a few weeks
They have done really well for me!
Great info here Troy. I recently got a deal on a nice set of 2.2’s for Grayson’s but they are a bit heavier and made the steering lag even more. He’s also got a light bar to install so the tipping the tray is a great tip for accessing the electronics.. I happen to have a pair of 35kg injora servos, might have to donate them to him 😁
I was really hesitant to add more rotational weight in the tires and wheels. Seems like the ESC and motors on this are a little underpowered.
How has it done?
Love it.
Love that course you built!
Thanks! It is good to have!
Troy, please do a series on the Ridgerunner!
I just might!
Looking at it though, it appears VERY similar to this truck. Not sure how different the mod approach would be.
What do you think?
@@RoadsideRCThat's a fair point. A part from tires/ wheels/ and servos, which is basically just this video again lol, I'd like to see upgraded metal steering linkage and heavier portal covers. Merry Christmas, Troy!
Great upgrade and how to video
Thanks!
awesome but i will wait for my stick servos to die before changing. this crawler is stock already very capable, with good tires and new servos is amazing!
That is a good idea also - have you see the servo-saver delete servo horns in the box? Would be a good help!
@@RoadsideRC yes i have the parts but mine still has the servo savers. I only use it with my kid at home traxks (pilows, cardboard boxes) or light trails at park so good servos are not a requirement. Also, have two 1/16 bashers that take most of my rc time :)
@@RoadsideRC finally ordered a 25kg servo. Just got me thinking that with no way of setting endpoints i may force the steering knuckls and brake parts often...heard of many cases...
upgrading the servo looks to be a good thing mate
*full watched👺Au👹big like too👍*
It sure is!
Could have used the extra non-saver horns that came in the box. Free and big improvement.
Yes! But, they are still plastic, so I don't trust them. I guess I should have noted that in the video.
@@RoadsideRC cool i hear you👍🏽
i cant use the metal servo horn provided with the new servo because its too long and rubs the steering linkage...i have ti use stock one and loose a few degrees of steering...
Is it really different than I show in this video?
I believe mine touched some, but not enough to worry about.
Also - you can always grind off the very tip of the servo horn to help with clearance.
@@RoadsideRC mine seems identically to yours....yes, i will probably have to grind 2 or 3mm but dont have a grinder, maybe sime patience with sand paper would do...
😁😁👍👍
Hi, you mentioned running a 3S lipo. Can the electronics handle that voltage or did you mean 2S? I cannot find anything on the electric specifications. Keep up the great how to videos!
Yes! The factory electronics will handle a 3S.
Great video. What kind of wheels are you using on the Danchee?
Thanks!
It is these wheels: amzn.to/3DpmjrD
Does anyone know why after I hooked up the new servo that my remote is now flashing red and green? And won't engage the car at all?
That is very odd. Are you sure you hooked everything up correctly?
What size wrench did you use to remove ball nut??
I am sorry - I do not remember. It was one of the tools I had laying around.
I have the same servos on my son's and I still have a lot more travel after the steering stops. It's really flexing the steering links. So I had to use the stock plastic servo horns. I'm just wondering how yours seems to work just fine. Any ideas?
Did you see around 4:28 when I talked about which hole to use on the servo horn? That makes a big difference.
@@RoadsideRC I did and even with that hole there is too much throw. There is room above that hole, I thought about drilling another hole and tapping it.
@@andrewgross635 That would work!
Is that the bully comp tires
Similar! They are the Injora version. These: amzn.to/3odENqY
You need a new steering light
Which steering light are you talking about?
What kind of tires?
I used these: amzn.to/43EGkG1
those are 90 degree servos right?
These are listed as 180*
@@RoadsideRC thanks for the info, but dont they overturn and bend the sterring bar? the original servo moves only 90*, 45* in each direction.
I have to put a word in for INJORA, here. Their servo just feels beefier for the same price.
Interesting! Maybe I need to check it out.