You can hook up the dash controls by connecting the KEY1 cable on the radio to Pin3 on the car. The radio has a built in app to reprogram the dash controls
Here's a link to the diagram. www.s2ki.com/forums/s2000-electronics-26/android-single-din-w-o-cutting-1186011/page3/#post24490388 Since I have an AP1 with no rear speakers, I just borrowed one of the pins for my rear speaker on my harness (Metra 70-1721) and moved it over to where Pin3 would be. Connect the Pin3 wire to the KEY1 wire. If you have rear speakers, you'll need to supply a new wire and pin to Pin3. Connect all the other wires and plug the radio into the car harness. Here's a video of the Joying controls to remap the buttons www.s2ki.com/forums/s2000-electronics-26/android-single-din-w-o-cutting-1186011/page20/#post24845578
I just checked a few weeks ago and they still had them but apparently they are no longer selling the one that I used. Here is a link to s2ki where another guy recently installed something similar. Hope this helps! www.s2ki.com/forums/s2000-electronics-26/wireless-carplay-perfection-single-din-1218955/
Yeah that’s a good idea! I thought it was going to be more of an issue as far as glares and reflections but I really have no complaints with this unit especially now since my dash controls work. If you decide to go for this in yours you will love it! Thanks for watching
Thanks! The door speakers are Boston acoustics that came with when I bought the car. Way better than stock but will be upgrading at some point. They are also being ran off an amp which helps a lot. The biggest help with sound quality was the skar audio tweeters.
I don’t know of one This is how I’ve always installed head units unless they are made specifically for a vehicle. As long as I don’t have to cut any factory wires then I just run with it.
I never hooked it up since I was going to be using android auto or CarPlay for maps. If you choose to use the antenna I would probably put it under the passenger dash so it’s not seen. It’ll more than likely work keeping it behind the stereo but may have some interference getting a good signal. Best would be on top of the dash but aesthetically that wouldn’t be pleasing imo.
@@FRS2K oh but here I thought you need the GPS antenna for CarPlay to work. I got an iPhone. So you telling me i don’t need to hook that up and Waze still work on the screen?
@stackzbundle it’ll work because it’s using the gps off your phone. If you wanted to use the standard gps that is on the stereo, you would need the antenna. Apple Maps and Waze is going to be a million times better. You’ll honestly never use the factory user interface unless you forgot your phone.
i don't get it Just insatl qualety speakers and an aux/bluetooth adabter and youll be fine. Why would you install a screen in an s2000???? Just looks awful man.
@@SevenOhFour that’s awesome! So to me it totally depends on what you want out of the car. Most people will tell you to keep it stock especially with the value continue to rise on them. The way I look at it is do you plan on keeping it or have intentions of selling it down the line….I personally do whatever it is that I truly want. If I want to widebody a car it doesn’t matter how rare it is I do it. If that makes sense. We do crazy things all the time and people question it all the time but at the end of the day it’s what we want not what they think is best
I believe there was a rubber grommet in the center below the bottom trunk latch that I fed the wires through. You’ll have the pop the plastic trim off to see it. Then I fed the wire behind the trunk liner and under the center console up to the back of the head unit. If you have led license plate lights and have the cam mounted about the plate, it’s going to wash out the image from the camera so it’ll either have to be relocated or put a little hood over it to block the light. Only an issue with the lights on.
@Jay An I don't have mine wired up yet but there is no reason why it wouldn't. Not sure if the modifry or the axxess harness would be best. Someone had commented that it can be wired up so I will look into that.
Nice vid and awesome bike. Ive been trying to boycott china and it's products so even though this unit looks decent, probably won't pick it up. Wish the USA would actually make stuff again.
Got the volume on the dash controls to work. Check out the latest video! ruclips.net/video/5FxNK1bj3Ww/видео.html
You can also modify and install rear speakers behind the seats on next to the air vents.
Yeah def looking at adding some speakers for the interior. Thanks for checking out the video!
You can hook up the dash controls by connecting the KEY1 cable on the radio to Pin3 on the car. The radio has a built in app to reprogram the dash controls
@Don Bui I'll have to check that out. Thanks for the tip!
Someone post directions how to do this I need to know ASAP
Here's a link to the diagram.
www.s2ki.com/forums/s2000-electronics-26/android-single-din-w-o-cutting-1186011/page3/#post24490388
Since I have an AP1 with no rear speakers, I just borrowed one of the pins for my rear speaker on my harness (Metra 70-1721) and moved it over to where Pin3 would be. Connect the Pin3 wire to the KEY1 wire. If you have rear speakers, you'll need to supply a new wire and pin to Pin3. Connect all the other wires and plug the radio into the car harness.
Here's a video of the Joying controls to remap the buttons
www.s2ki.com/forums/s2000-electronics-26/android-single-din-w-o-cutting-1186011/page20/#post24845578
Post a video
FYI you don't need to do holes on the stereo. I didn't make holes just put them on the sides and worked perfect lol holes are there already 😅
Got mine 2 weeks ago best s2k mod ever! 👌 great video btw
Thanks for the video been wanting this after seeing a few videos on it but no how to. Thanks keep up the great content
@dub88acc still no regrets after having this for a little bit now. Thank you for checking out the video!
Nice gota get one for my ap1 also !
What's the link to buy the stereo?
DUDE THANK YOU FOR THIS VIDEO AND LINKS
No problem!
Sweet, I've been looking into this
No issues here so far! Going to be doing an update video on it here soon
Magnet can caused your LCD display colors to distorted overtime.
@Be Good Thats a good point. After using it for a while now, I am perfectly fine with where it sits but I might get creative with it.
You can lay a anti glare/print film on it
Bro please help, iv been trying to find that headunit everywhere Amazon, Ebay, even the JOYING site but I cant find it anywhere. Please help me 🙏🙏
I just checked a few weeks ago and they still had them but apparently they are no longer selling the one that I used. Here is a link to s2ki where another guy recently installed something similar. Hope this helps! www.s2ki.com/forums/s2000-electronics-26/wireless-carplay-perfection-single-din-1218955/
You could get an anti-glare screen protector! Nice vid!!!! Can't wait to do this to my ap1!!!!
Yeah that’s a good idea! I thought it was going to be more of an issue as far as glares and reflections but I really have no complaints with this unit especially now since my dash controls work. If you decide to go for this in yours you will love it! Thanks for watching
I bought an S2k specifically because it doesn’t have any screens 🙂.
I do love the simplicity and driver focus that s2000’s have but when you drive 15k+ a year in one, CarPlay and a backup camera are real nice!
What kind of speakers and tweeters are you running?
What door speakers do you have? Sounds really good!
Thanks! The door speakers are Boston acoustics that came with when I bought the car. Way better than stock but will be upgrading at some point. They are also being ran off an amp which helps a lot. The biggest help with sound quality was the skar audio tweeters.
im finally getting my s2000😁
That’s awesome!
Everything worked as designd... EXCEPT my sub out... wondering if you had issue with your sub out?
Update video is up if you want to see how this is holding up and my thoughts on it! m.ruclips.net/video/zCOBLbaZYR8/видео.html
the carbon dash looks fire, where did you get yours?
Thank you! It was hydro dipped in carbon
Can you link a iso connector I can use for this install instead of cutting the one provided!?
I don’t know of one This is how I’ve always installed head units unless they are made specifically for a vehicle. As long as I don’t have to cut any factory wires then I just run with it.
Hello, where did you mount your GPS antenna? I didn’t see you saw it in the video.
I never hooked it up since I was going to be using android auto or CarPlay for maps. If you choose to use the antenna I would probably put it under the passenger dash so it’s not seen. It’ll more than likely work keeping it behind the stereo but may have some interference getting a good signal. Best would be on top of the dash but aesthetically that wouldn’t be pleasing imo.
@@FRS2K oh but here I thought you need the GPS antenna for CarPlay to work. I got an iPhone. So you telling me i don’t need to hook that up and Waze still work on the screen?
@stackzbundle it’ll work because it’s using the gps off your phone. If you wanted to use the standard gps that is on the stereo, you would need the antenna. Apple Maps and Waze is going to be a million times better. You’ll honestly never use the factory user interface unless you forgot your phone.
@@FRS2K thanks for the help. Much appreciated. Love your contents
@stackzbundle absolutely! Thank you!
If I add the reverse camera, will it come with the din?
Yes when you go to order the stereo it gives you the option to add a reverse camera.
i don't get it
Just insatl qualety speakers and an aux/bluetooth adabter and youll be fine. Why would you install a screen in an s2000???? Just looks awful man.
About to get a S2K
Do it!
@@FRS2KI’m buying it from my uncle it’s a 2003 fully stock it’s in amazing shape do you think I should keep it stock ?
@@SevenOhFour that’s awesome! So to me it totally depends on what you want out of the car. Most people will tell you to keep it stock especially with the value continue to rise on them. The way I look at it is do you plan on keeping it or have intentions of selling it down the line….I personally do whatever it is that I truly want. If I want to widebody a car it doesn’t matter how rare it is I do it. If that makes sense. We do crazy things all the time and people question it all the time but at the end of the day it’s what we want not what they think is best
@@FRS2K I definitely plan on keeping it thank you for the advice because I wasn’t sure but now I’ll do what I truly want to do with it
@@SevenOhFour good luck with the build! Hope to see what you end up doing with it!
Hey, where did you wire the backup camera wire through?
I believe there was a rubber grommet in the center below the bottom trunk latch that I fed the wires through. You’ll have the pop the plastic trim off to see it. Then I fed the wire behind the trunk liner and under the center console up to the back of the head unit. If you have led license plate lights and have the cam mounted about the plate, it’s going to wash out the image from the camera so it’ll either have to be relocated or put a little hood over it to block the light. Only an issue with the lights on.
does this work with your steering wheel controls?
@Jay An I don't have mine wired up yet but there is no reason why it wouldn't. Not sure if the modifry or the axxess harness would be best. Someone had commented that it can be wired up so I will look into that.
Mine won’t turn on when I turn the key😢 bought it 2 years ago just been sitting in the garage
What roll bar do you have?
It was custom made but it’s designed similar to the spoon roll bar
Nice vid and awesome bike. Ive been trying to boycott china and it's products so even though this unit looks decent, probably won't pick it up. Wish the USA would actually make stuff again.
Thank you! I totally get that for sure! Fingers crossed the US will eventually get on board.
Remove before flight!
lol