I love how this truck seems "thrown together" but you can tell the owner has been building and and piecing together what seems to work best for the owner. Id add a little weight to the rear to help with it wanting to do gymnastics going down. Such a great time to be in this hobby
Glad to see you helping the guy out with a repair job. The Super8s definitely benefit from the #3flow9rc delrin skids. I don't like AL/brass housings. They tend to stick and drag more on rocks. Love the wheel/tire combo. Seems like the JConcepts Tusks work well on your PA rocks. Wide and low with good front weight bias will always be a line killer.
Trey, I think you should have people submit clips of their best lines and you watch them and rate them, I feel like it would be a good alternative to sending in their rigs in case they don't feel comfortable doing that
That looks like it has a fair amount of overdrive in the front. It's very noticeable in the video. It certainly seems to make it work well with the way the build is set up. Where my friends and I crawl, that much overdrive can be hit or miss.
Nice repair job!!! Hope you billed for tech time!!! Lol!!! This truck ripped, there's obviously a difference between scale and trail, keep it light to climb the height and a good wheelbase 👍 Rock on the wide 24th!!!
Sweet LCG chassis on this one, looking forward to building my first LCG rig, SR5 body is designed with successful prints in resin and FDM so good to get going soon. Thanks for another awesome roast, getting a ton of build ideas from ya !!!
Sometimes Loc-tite is the call.......sometimes anti-seize is. Probably not a bad idea to key a few metric taps around in common sizes. Good to chase out holes before screwing in bolts. Kinda looks like the bolt got heat anodized so that may have softened the temper of the metal, making the threads wonky.
Notice a lot of guys you know run inserts and I used to run them big time I have recently went back to foam dual stage and let me tell you it helps big time because on steep steep stuff are you getting that little bit of hop that foam calms it down also something else I know this is with the brass Super 8 gets hung up really really bad in my personal opinion I do have one but I feel like I'll probably take it off
Another thing is I believe it's a weakness on Knuckles if you both the tie rod and the steering link to the same exact you know location the new super heavy Deluxe Knuckles the 22 gram brass knuckles that I run you bolt Deeds link up to the top of the knuckle and evoke the tie rod down to the bottom side it gives you incredible steering
i know where that bolt came from lol but i’m not going to put him on blast because i like his parts.. i threw it out immediately Evan is a great kid, awesome driver and builder ! Not surprised you loved his rig
It started out fuff, however ended very well!! 💯🤙🏾😎 Great performance build and the Tusk were performing great. I guess I need to break in my Tusk more! 😝
Hello blow knuckle takes a 2 mm I Run 2 mm on all mine cuz it keeps you from snapping so easy and then up top where you got those spacers I tried to mainly run ltrp the little short screws cuz I feel like you know it's more compact you ain't putting so much Leverage on that screw you know and then it definitely keeps some turning very freely around that screw head
Well on the bright side there was something to grab onto with that screw! Lol "... i try to stay positive.. we're still positive." Nice build, i like how many different parts he used. I'm not into brass links, and that batt looks a bit big, nice rear chassis extender as i prefer more vertical shocks, performed well. I'm gonna have to try out a KillrChassis. 4/10? Ouch. He shouldve had LIGHTS to hypnotize your lady into a 10/10! That's my secret plan... LIGHTS! 😅😅😅😅
@@reprieverc thank you so much, i appreciate it! It took forever to build, seriously, way too long. I'm working on a new build, gonna try to speed up the process, but there's more fabrication by far in this new one, and so it'll take a while.
Personally I like the look l would have given it a 7.6 and I like the thought that went into building it you can tell it wasn’t just slapped together not my favorite rig but definitely up there🤘🤘
Ouch. I have most my Weight up front also. Yes we want her Honest Opinion Great little rig. Where can i get a Cheap Body for my Wrangler Jeep? The body is killing my Performance and i am Done decorating it LOL. Thinking of getting that walmart Yellow Buggy to put on it. Really would like a Dodge Pickup 80's Cummins Deisel look. Might hit the Thrift store. Mark on my arm the Wheel base width hahahah
I really need to send you a truck. I haven’t seen you do a hardpark goblin like what I got from you. Maybe I should build that up and get it sent to you for testing!
i would add just a lil bit of weight in the back... for sure... ....not much... just enough to keep it from going ass over tea kettle great kik rig though...i love how it's just a mish mash of parts but works amazing!!!
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
The guy just sent the car to the mechanic 😂😂😂😂😂😂
He knew what he was doing...
@@24Yepp lol if that's the case expect my truck soon😂
We should get a Roastin Rigs leaderboard. Score the rigs out of 20. 10 for appearance, 10 for performance.
I second this!
I love how this truck seems "thrown together" but you can tell the owner has been building and and piecing together what seems to work best for the owner. Id add a little weight to the rear to help with it wanting to do gymnastics going down. Such a great time to be in this hobby
This channel has become easily one of my favs. Great vid and great build. Greatings from Spain!
Thank you!!
same!!! i'm addicted
Kid has some serious potential in this hobby if he stays with it and keeps learning!
There's nothing like continuously building and adding on to your trails❤
That would explain why i like the paint and decal work 😂
Glad to see you helping the guy out with a repair job. The Super8s definitely benefit from the #3flow9rc delrin skids. I don't like AL/brass housings. They tend to stick and drag more on rocks. Love the wheel/tire combo. Seems like the JConcepts Tusks work well on your PA rocks. Wide and low with good front weight bias will always be a line killer.
Sitting by the fire pit, drinking ice cold monster and 24yep to end a weekend ❤❤
It’s the drunken neighbor ! Cool new line! Ugly truck …. lol it got a 4 !
LOL the drunken neighbor, love it
Trey, I think you should have people submit clips of their best lines and you watch them and rate them, I feel like it would be a good alternative to sending in their rigs in case they don't feel comfortable doing that
This rig truly feels exciting to drive
Should be Treys repair shop but after repairs the little rig came swinging 🔥🔥🔥😎👍
That looks like it has a fair amount of overdrive in the front. It's very noticeable in the video. It certainly seems to make it work well with the way the build is set up. Where my friends and I crawl, that much overdrive can be hit or miss.
That truck went really good I think. I like it. I would change the gear ratio to where the rear isn’t as much as it is.
Nice repair job!!! Hope you billed for tech time!!! Lol!!! This truck ripped, there's obviously a difference between scale and trail, keep it light to climb the height and a good wheelbase 👍 Rock on the wide 24th!!!
Sweet LCG chassis on this one, looking forward to building my first LCG rig, SR5 body is designed with successful prints in resin and FDM so good to get going soon. Thanks for another awesome roast, getting a ton of build ideas from ya !!!
Im personally a fan of the looks of this rig he made some choices I wouldn't have but its his rig not mine good work to the builder 🤙
Sometimes Loc-tite is the call.......sometimes anti-seize is. Probably not a bad idea to key a few metric taps around in common sizes. Good to chase out holes before screwing in bolts.
Kinda looks like the bolt got heat anodized so that may have softened the temper of the metal, making the threads wonky.
Did very well on the rocks the percentage of under drive is perfect, the only thing I will change will be the paint job
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Notice a lot of guys you know run inserts and I used to run them big time I have recently went back to foam dual stage and let me tell you it helps big time because on steep steep stuff are you getting that little bit of hop that foam calms it down also something else I know this is with the brass Super 8 gets hung up really really bad in my personal opinion I do have one but I feel like I'll probably take it off
Happy Sunday Boys!!!
Made me want to put on some Modest Mouse… “positive and negative, positive and negative” 😂
Quite the roller coaster of emotions
@@24Yepp 😂
Every simple job is one broken bolt from a all day nightmare!. 😄
But it was surprisingly good after initial impressions.👍🏻
Another thing is I believe it's a weakness on Knuckles if you both the tie rod and the steering link to the same exact you know location the new super heavy Deluxe Knuckles the 22 gram brass knuckles that I run you bolt Deeds link up to the top of the knuckle and evoke the tie rod down to the bottom side it gives you incredible steering
i know where that bolt came from lol but i’m not going to put him on blast because i like his parts.. i threw it out immediately
Evan is a great kid, awesome driver and builder ! Not surprised you loved his rig
remain positive boys
It started out fuff, however ended very well!! 💯🤙🏾😎
Great performance build and the Tusk were performing great. I guess I need to break in my Tusk more! 😝
Hello blow knuckle takes a 2 mm I Run 2 mm on all mine cuz it keeps you from snapping so easy and then up top where you got those spacers I tried to mainly run ltrp the little short screws cuz I feel like you know it's more compact you ain't putting so much Leverage on that screw you know and then it definitely keeps some turning very freely around that screw head
Great work Evan!!
@12:31 This line makes my rc manhood articulate! I want to see that line with some 6x6 action :)
That’s the screws that come with the hard park knuckles. They’re generally pretty strong.
@@NovemberFoxtrotRC The rainbow colored ones are the included ones?? I had no idea
@@24Yepp Yessir. Two sets ive gotten from him have had them.
Add a spare tire on the rear deck of the bed. Should be spot on then . And definitely 1.3s for when you are that wide
The only thing I'd add to this thing is a rear skid to the diff. Definitely a cool build
Well on the bright side there was something to grab onto with that screw!
Lol "... i try to stay positive.. we're still positive."
Nice build, i like how many different parts he used. I'm not into brass links, and that batt looks a bit big, nice rear chassis extender as i prefer more vertical shocks, performed well.
I'm gonna have to try out a KillrChassis.
4/10? Ouch.
He shouldve had LIGHTS to hypnotize your lady into a 10/10!
That's my secret plan... LIGHTS!
😅😅😅😅
🤭
I just watched yours I freaking love your build phenomenal execution of looks, performance and unique 🙏
@@reprieverc thank you so much, i appreciate it! It took forever to build, seriously, way too long.
I'm working on a new build, gonna try to speed up the process, but there's more fabrication by far in this new one, and so it'll take a while.
I think Josey the Hair Clipper sent you that rig!!!
Personally I like the look l would have given it a 7.6 and I like the thought that went into building it you can tell it wasn’t just slapped together not my favorite rig but definitely up there🤘🤘
What’s up Trey? Another awesome video!
@23:59 nuff said!
a long time wait for
I want to copy this design. At first it seemed like a spare parts build but wow
Ouch. I have most my Weight up front also. Yes we want her Honest Opinion Great little rig. Where can i get a Cheap Body for my Wrangler Jeep? The body is killing my Performance and i am Done decorating it LOL. Thinking of getting that walmart Yellow Buggy to put on it. Really would like a Dodge Pickup 80's Cummins Deisel look. Might hit the Thrift store. Mark on my arm the Wheel base width hahahah
Maybe a bigger tire and definitely a touch of rear weight for the descents.
I really need to send you a truck. I haven’t seen you do a hardpark goblin like what I got from you. Maybe I should build that up and get it sent to you for testing!
Yes!! I'm down!
Micro LCG builds, for when you want to waste the same amount of money as a 10th scale LCG without having any of the capabilities.
@@creekcreeperrc7972 i prefer to waste even more money on them
i would add just a lil bit of weight in the back... for sure... ....not much... just enough to keep it from going ass over tea kettle
great kik rig though...i love how it's just a mish mash of parts but works amazing!!!
What’s the battery in there? Trying to find one that size
I mean, if you wanna drive an scx6 for the channel I have one. I’d like to throw the Jurassic park livery on it first tho.
Question... best links for cr18p rock van ? Thanks
Ah man I really have no idea
I need to send trucks for testing! Is instagram the only way to get them to you?
Yeah or email me bikebraah@gmail
i know where that bolt came from lol but i’m not going to put him on blast because i like his parts.. i threw it out immediately
Mmm is it just me or am I noticing that you’ve said that every killr chassis you’ve tried so far have been killr good lol?
They've been built well 🤷🏼♂️
Stopped watching after wife rating of 4 😂😂😂