Lets move some equipment with the Mack and lowboy
HTML-код
- Опубликовано: 15 окт 2024
- Shop Dirt Perfect
www.dirtperfec...
Facebook / dirtperfect
speed binders
www.speedbinde...
Lets some do some trucking and move a few excavators. while trucking lets see how the battery hold up using the speed binders.
#dirtperfect
#trucking
#speedbinders
#movingequipment
I have been using speedbinders for 2 months and I love them. Our equipment is smaller but the same rules apply. I move farm equipment and bobcats for a dealer in southern Ontario. The speedbinders are just like you say. The have simplified tiring down corn heads. The batteries were only an issue when I used my older 18v dewalt no issues with the new lithium ion batteries
Awesome
Your right about the speed binders there great. thanks showing then like channel a lot Bean from VA.
No problem
Thumbs up to you mike.
Thanks Christopher
A Craigslist Bobcat loading a Craigslist side by side. You can't make this stuff up. I thought I'd seen it all. I'm in tears. Thanks for the laughs.
😂
In my days of working with Equipment we didn't have rachet binders, we didn't have good trailers, like they have these days, most Equipment was loaded on a no ramp trailers, especially loading a dozer on trailer could be very dangerous in wet weather days. Thank good are dozer had Rippers then. In the late 70 and early 80 Codaza trailers came out the first brake down trailers that I remember anyway. No moving Equipment is almost a breeze, plus lot safer, especially with folding under rear neath Hydraulic ramps. It's Amazing how trailers have changed in pass 30 years.
Thanks for the ride along Mike, wish those binders were around when I was hauling equipment!!
'Blower works great'! Shove - Push, Shove - Push - Flick!😂
I worked for Mack in cincy for years after i got out of the service very good . I also run the river from the dam above cincy to louisville in my boat. hope to see you some time. been watching you for some time . im 79 and still go////// great vids
Awesome and yes hope we cross paths somet
Reading many of the comments and it’s very clear that a lot of people don’t watch all of your videos Mike. Can’t understand why but many of their questions have been answered in previous videos.
Lol I agree 🤷♂️🤦♂️😂
Can definitely see the advantage of Rachet binders , loading equipment with the old style binders you had to be careful that it didn't hit you in the face, that's why you used a cheater extra long bar. Plus you had rap the excess chain around lever so it wouldn't pop lose some how. A plus for Rachet binders.
Loved the fine adjustment to the camera angle when loading the Volvo. Crude but effective!!!
Not gonna beat you up about the inside view of the cab... just wanted to let you know how impressed I was that you only had one Pepsi can in there.
Thnx for the ride along.
lol need to step up my Pepsi game for it 😜😂
Hi Mr dirt perfect. I got to pick on captain on here. He was not sick he was playing in the woods. He now needs to clean out both trucks. Great video as always
Thanks
awesome sound of the mack truck sweet
Thanks
Just want to say thank you for taking me along with you. Back in November I came down with a dezese I can't spell it but overnight I lost the use of my legs and my whole body went South on me. But I'm learning to walked again and doing pretty good !! I watch your vids all day and it feels like I'm out there with you. Love it Mile. Thankgou for making me feel like I'm out there putting the equipment threw it's paces and having fun. I'm glad I found your vids. God bless you and your awsome family. Peace..
Thanks appreciate all the feedback and kind words. Glade you found the channel and hope your back on your feet soon 🤔👍😁
Spydr 1 prayers for you!!!
Spydr 1, Hope you feel better soon, hang in there.
Good afternoon just wanted to thank you for keeping me entertained. I don't need a TV with you and logger wade, Chris, cotton. I love all of your guys videos,and a few more
Thanks appreciate that
@40:00
Look. Your dump truck made it back from the trailer park dump site on its own.
Magic.
I know right 😁
thanks for the video i was looking at that blower again on amazon before i watched this. after my cord coming loose 5 times this weekend and catching on everything while trying to blow my shop out on a nice day I am sold. the corners will no longer be a problem
Yup loving mine
I you could also switch the wires inside the little swift inside the handle because one of them concerns that control out to it and the other wire sends it to the other side so just at switch the relay wars
I’m very surprised that you leave your binders out like that. You must continue to work in the country. Because in any size city, those, especially those would wind up sprouting legs. I have the old style. And I keep those locked up so no prying eyes to see. But, you have me sold on the new ones. Save what’s left of my back and let the 3/8’s impact do all of the work. Thanks for sharing it.
Loved the video, hauling is some of my favorite part of this line of work! Keep it up
Thanks buddy
@@DirtPerfect Whats in the Mack, a Cat?
My friend I love that old truck sounds great looks great really impressed with it speed binders are the best thumbs up my friend
Thanks buddy
Always handy to have a longer thing.
Lol very true 😂
I used boomers for years until they came out with 1st gen screw binders, butt had to used old type in those tight places. Anyone should see the benefits of those speed binders you use. As for commentators, its difficult to some people not to sound condescending, when they ask a question or make a statement. They probably meant well.
Great job doing videos, and the actual work itself, my dad always said “there’s more than one way to skin a cat.”
that ol truck sound good !
Great idea on the short chains with the new style binders ! I need to do the same . To many times dragging out a 10' chain when a 3' would work . Looking good Dirt Perfect !
Yup they are working well for us much easier to work with
Like the video Mike ,keep on trucking .
Thanks Leo
I'll agree with you on the speed binders, I bought 5 and am enjoying using them. As you get older it's all about convince.
Good video moving iron.
Thanks mike
Love the sound of that MACK !
Thanks Jc
Thanks for sharing your adventures. Those speed binders sure seem to work nice, not much more you could ask for. Did see a Matt Reisinger video at a trade show today where they are integrating smart technology and gps into nail guns, I guess if you were to do that with the speed binders you could have them report if they loosened while in transport. That and add a few hundred each to the price. Have a great day, wishing you and your family the best.
No will have to go check that out
Good old Eaton Fuller 10 speed great and reliable. God bless
I absolutely love those speed binders! I work for an equipment rental company in Phoenix AZ and they bought us 10 each. I actually use the little 1/4” drive Dewalt impact. I’ll probably step up to the 3/8” once it dies but it’s going strong so far, after 8 months. I’ve communicated with Steve a few times as well, super cool dude.
Awesome and yes he is
That john deer looks like it's only good to scoop Turkey crap.
"No........were hurt in the fueling of this vehicle", only your wallet! Love the sound of that Mack.
Lol that’s about the truth and thanks
Just wanted to comment on a couple of the units loosening slightly. You have been running them every day for about 4 months, simply remove the end links and clean the threads up with a wire wheel or pressure washer. Lubricate with fluid film and you are back to new tension holding. Like any binder, they need some love from time to time! Thank you Dirt Perfect!
Thank you steve
Thank goodness for a fresh video, I was going thru wihdrawal
Lol
Straight pipes and Jake brakes!
The great thing about you posting videos in the morning is , I get to read all the comments in the evening.
Lol
Loud pipes save lives
😁
Hi Mike, you have probably thought of this , but can you not switch the wiring at the rocker switches in the joystick for the thumb.
I apologize this is probably well after the fact ,but can't help myself 😕 anyway those speed binder's definitely beat trying to lock a load binder in a awkward space. I'd say you know because you have used them . Let the others struggle old school LOL.
Have a great one my friend 😀 🇨🇦 Craig
Craig was able to switch the hoses and works good now
You would be a fool not to like them binder with a drill that makes it so much easier I really like the Mack truck it sounds real good going through the gears be safe my friend
I agree and thanks Glenn
Excellent video
Thanks
Unplug the heat is seat and the summer time plug it backup in the Winter time
Great video Mike have a great one and stay safe 👍
Thanks Greg
Really enjoyed this video...Man, you stay busy...looks like a lot of work to do....thanks for posting.
Thanks and thanks for watching Michael
That's got to hurt to admit Kleenman did good with the short chain idea. He got the idea from riding the short bus. Lol God bless
Lol
You could move equipment to an 'old' location to fix up silliness you left behind. I doubt it would be the first time. LOL
The value of the Dewalt blower is it removes the dust and stuff that could blow off on the road. A broom does not get the blowing dust, just the gravel. City slickers could grab your DOT number and take iPhone pictures of blowing dust, except when you already blew the dust off.
Hey guy,
I think you do the best job of
Taking care of your viewers than all my other favorites. I love the rides of risk that you try, the last one hauling logs had me wondering if we were going to get swiped off by the branches. From the mirror? Anyway you keep go'in. You're doin fine as artwork.
Thanks great personality great variation. Hard work guy.
Shawn.
Thanks Shawn appreciate the feedback
truck interior is no more messy that any of my vehicles!
A messy truck is the true sign of working man who is very busy. A busy man usually is making money and keeping up with his obligations.
Great video thanks for sharing have a great day and stay safe out there
Thanks and thanks for watching
Hey put a big hook on the other side for dozer. You’ll hopefully think me later. Then we made two one hook sided chains for the blade.
I have to agree with ya! trying to tighten binders between the tracks & blade would be horrible
Haters dont like the dang binders then dont buy em. They work excellent for your use so to heck with them guys. I think im gonna check into a few of those myself
I agree and we love them
Very impressive load. Great video
Thanks mike
Maybe you can switch the plug on the electric valve that the thumb buttons control. That's what we did on the grapple rotate function on the Liebherr 934 and 944 material handlers
We swapped the hoses around working good now
*Duh ,,, why didn't i think of that*
The ratcheting mechanisms on the speed binders are nothing more than specialized air brake slack adjusters
mounted for turn buckles. Impressive, hats off to the inventor !
Yup Steave is a cool guy
Chris,what about a little bit of TLC on the poor old dozer, Left on it's own unloved.👍👍🇬🇧
Not for sure what one your talking about
Chris, isn't the little dozer parked near the excavator yours ?if not I apologise.🇬🇧
Yup but it’s in awesome shape use all the time
One thing about the cab of any of your equipment is that it is a great endorsement for Pepsi LOL.
Lol sad but true Barry
Thanks for spending part of the day with me brother Mike ❤️😎
We all watched ANDREW CAMARATA use them binders to slide 42ft sections of span create into place. Slick as snot
Yup same ones
Make that dog earn its meal. Haha sounding good driver
Lol thanks Andy
Great channel, new subscriber from England.
Thanks and welcome to the channel
Blowers nice....I hope u kept your broom tho...😁
So far that Optima battery sponsorship has paid off... Everything started!
Lol yes sir
GMC got back to the yard before you got done hauling. Magic! :)
😁
Enjoyed the video bro.
Thanks
Great video and love that Mack. I went to school for driving truck, like 30 yrs ago and one of the classes was how to secure loads. The instructor always made us go around with a bat or pipe and smack the chains 2-3 times, then re-tighten. Is that something you ever do and what's your opinion on that procedure, it seemed to work by getting any kinks out from the chains and what not. Thumbs up !
Not a bad Idea I usually recheck a few miles down the road
160 giving the Mack a nice little work out
Yes sir
Good video. Thanks
Thanks Donald
If I am ever up in Indiana I am going to record that Mac with my audio recorder and then I’m going to put it in a sound module for one of my trucks!
That would be awesome
TAKE some 3/8ths plywood and cut it to fit the floor of individual compartments of your new tool box and use liquid nails to glue them down ! It will protect the metal and absorb all the vibration from metal to metal contact !
👍
Not sure of new stuff but in my day we checked load 5 to 10 miles after starting run. After load settles.
I really like ur excavator. That front blade would come in soooo handy.
It is loving the blade
The interaction is what makes youtube great don’t take the comments to heart really bud you don’t have to defend yourself. If someone doesn’t like something so be it life is to short for the negative bologna thanks for sharing 👍🏻Enjoy your videos
Thanks buddy
The poor Captain is under water today . Hope he gets better soon.
Your battery is gonna die and your load is gonna fall off. You also cant shift and should take classes from Wade. I can’t believe i just watched 5 commercial breaks and 53 minutes of hauling equipment after i did the same stuff all day myself. Great content Mike keep them coming. You got a awesome channel sir.
Lol thanks buddy sorry I haven’t been over on your channel in a while things have been crazy
The thumb control looks right to me, it’s all what your used too.
Yup agree
When you made the last move, 3 of the speed binders had loosened up some. If you were stopped for inspection would the binders still pass inspection? Iam just curious . I want to know if would feel confident using the speed binders and not be unsure of their reliability ? Thanks for the video. Great idea to use the leaf blower and to have a recharger mounted in the box. Happy Trails. Hugh
One of the reasons I love the speed binders is the stay was tighter then any thing else I have ever used love them been using for over a year
If you get a chance talk about axel weights and loading. And how to position the equipment for a balanced load and DOT weight restriction.
Man the Mack sounds good!
You can change place on the buttons for the thumb.
We switched hoses and works great now
That's exactly the spot I was considering those speed binders would work great for!!!!!!! Also thought an impact might work better than the drill, glad you tried it first! Lol
Yup working good
Row them gears, I miss that! Re-tired now, great videos bud!
Thanks Gary
I like the speed binders, I have to carry a drill all the time anyway. Looking at buying some myself. The old puppy dog's tongue was hanging out when you got to the top of the hill. I had to Lol when I saw all those empty Pepsi cans in your truck. My truck looks the same way.
We are loving them
Hi Mike I have a question Why don't you have a Big shop for your equipment down by the Derby Market where you store everything ?
Would it not be easier to work and maintain everything ? Thanks Mark
If it’s there I am in trouble try to keep in on jobs where it’s making money 😁
I have a question, are those basically slack adjusters on your hold downs?, I've had those split out at the adjust bolt on brakes, just asking? When they get older..
No and all parts are replaceable have not broke one yet but nice knowing I can fix it if it does in the future
yo - DP really neat camera angles. i assume it takes much effort to do them, but thanks.
Thanks buddy
like those binders & the no slide off bars in the middle maybe i should put them on my trailer !!! hmm just sayin !
for your 120 look at the muffler common probleme on those the muffler rust out then the trotthle cable melt so your trothle motor might sitll good
Yes I have replaced that before
Occifer Hoover approved!
😁
You can now ask your local Crosby distributor for these.
Thank you for your appreciation of the binders. These are awesome binders and that is why the Crosby group decided to add them.
Yup they bought the company
WARNING: Just a thought, when you split from low to high with the splitter, too early, that wears on your synchronizers! 1972 Ford Louisville 9000 dump truck, 290 Cummins with a Fuller Road ranger thirteen speed tranny, six hundred thousand miles on it, my first real driving job. It took three months to wear those synchronizers down to where it started to jump out of thirteenth gear on the highway. I'm just saying? Wish I would of had those speed binders once I got into flat bedding and then heavy haulin'.
Not possible will it shit till you hit bridge
Please teach us more about legal requirements for weight on each axle, number and positioning of the chains, etc. You cleaned the loose dirt off the bed, what about the dirt in the tracks?
Load securement with Officer Hoover and Steve with Speed binders ruclips.net/video/46hKizooXDk/видео.html
@37:10
What’s wrong with that Eh!!!
Well. Except for the extreme amount of snow we have gotten in less than 48 hours and my afternoon shift being canceled today, not that that’s a bad thing on a Friday. 😁
That crap smells awful
I need to get me some of those speed binders.
I would recommend them we love them
I'm a year late watching and commenting, but the thumb buttons make sense to me. If you look at your right hand your thumb moves towards the left to open it, and to the right to close it.
Did you end up switching it?
Yes
I think you need to add another one of those toolboxes to the other side that would just make the trailer look sharp and I will save you a few steps of walking around with your chains also gives you a little bit more dry storage..
Love the sound of that ole' Mack. I only wish you wouldn't have sped it up when you did. LOL... I had the volume on my computer maxed out and boy did it sound good. My wife was like, "What's the matter with you". ROFLOL...
Lol awesome 😁
The light hitting the passenger seat made it look like that marine silver sparkle vinyl from days gone by.
Hmm will have to go back and look
@@DirtPerfect When you're first getting the Big Dog rolling and maneuvering.
I really love that truck nice small tidy and sounds greatttttt😂
Thanks kian
@@DirtPerfect Mike, Kian was joking when he said 'tidy'. 😉
@@TrevorDennis100 haha I dont mean clean I mean a nice small handy powerfull truck😂😂