MK2 Ford Cortina 1600e! - WILL IT START? (Day 2)
HTML-код
- Опубликовано: 28 июл 2022
- In today's video we see if Marcus can get this 1970 Ford Cortina MK2 1600E running! Will it run? Let's find out!
If you want to see more videos like this then subscribe and turn on notifications for all our future uploads.
Social Media:
Website: www.baxendencarbreakers.com/
Facebook: / baxenden-car-breakers-...
Instagram: @baxenden_car_breakers 
Авто/Мото
the sounds on here remind me of so many mornings in the 80s and 90s trying to get my ancient cortinas or escorts started so i could get to work!
I can relate to this comment so much! My first car was a mk1 Cortina, my second car was a mk1 Escort, every morning, especially in Nz winter, my folks were serenaded by cranking and “start ya b%#tard!”, always when I was running late….
Tell me about it! The bain of my life was a MK1 Fiesta, totally pissed me off.
The soundtrack of my life! I have owned 1600E's continuously since 1982 , first one was an Amber Gold like this. Cold starting was never a Ford strong point so yes the sound of strained starters and slower and slower cranking and drained batteries. I've probably wasted 6 months of life sitting and turning the key in expectation!
😂 I would sit in mine at 6am turning it over sometimes it would start others it wouldn't. Go to work thinking I must sort that out when I get home in the evening. Guess what? The bloody thing would start first go. Happy those days have gone. Looking back I can laugh now 😂
Brings back memories of my old Cortina crispy guys
I remember the Kent engines. A good simple engine that was relatively easy to work on and, if serviced regularly, would give little trouble. A fair performer too for the time.
Well done for sticking with it for our entertainment 5 stars
I was willing it to start. Still can't get over the rot on that thing! Somebody's pride and joy once upon a time. Such a shame. '
Well done for getting the poor Cortina’s heat beating. The tough part is the rust. It’s so rotten bless it.
Will be fine with a new shell, it’s having the correct vin number that counts 👍👍👍
Bloody hell that was tense I was on the edge of my seat but I new old marky boy wouldn't disappoint his fans 👍Remember folks suck squeeze bang blow 😛😜🤪
Top watch tonight. Loved the close ups of Ben concentrating, and standing around. Lazy, but a leg end.. Excellent
ford crossflow engines never die
Love these start the old hen boxes up again, great to see Marcus is breathing new life into an ol hen box.
This same old OHV ford 4Cyl engine was used for years right up to end of the 90s in fiestas and escorts with electronic ignition and then single point injection. Was pretty strong and reliable
Reminds me of being an apprentice in a Ford Dealership working on the same engine OHV used in the later ford fiestas and the tappets needing set and sounding like a bag of spanners. 1 down set 8 6 down set 9. Me mechanic explaining the rule of "9" when setting valve clearences and then the engine sounding really quiet.
Customer used to think they got an new engine , only took 30 mins to do.
Good memories 27 years ago :)
Yes I agree my old 1100 fiesta had a ohv Kent engine the body went first the engine was bombproof.
Perseverance pay's off! Nice one guys, been entertaining to watch both these videos 👍
The engine lives on well worth the breakfast.
Hi from Durham guys 👋 👍 what a toppa it ran 👌 and for the fact you never opened carbon or hit Gill chamber the flaot needle and jet probe weren't even letting fuel thru so was just running on start fluid but yep it popped off👍 if you mixed a bottle of petrol with drop of 2 stroke oil and went straight down it's throat it might of been more productive under bottle feed tho great shout 👌 woohoo thanks for your time be safe and see you soon 👍 👋
Absolutely brilliant these will it run episodes are the dog's bollocks fellas
you lads make me smile keep up the good work
Good stuff guys 👊🏻 she is a runner . Always BIG RESPECT from the West Midlands 👍🏻😎👊🏻🔥
I knew Marcy's boy would get it going , excellent video boys heeeeeeee 👍
Massive Heeeeeeee boys!! 💪
Well done Marky boy, good old x-flow lives again!! Awesome 😎
Hallo 🙂! Schönen Nachmittag! Hoffentlich kommt noch ein Video von dem Ford Cortina MK2 1600E
Mit freundlichen Grüßen 😎!
Evening chaps
Just put petrol straight in the carb , that easy start won’t do much if the carb is bone dry , you think it’s got to get all the way into the inlet manifold and pistons
Great video guys it will run again for longer keep up the good work brilliant channel top bloke's ❤️👍👍👍
In its day the 1600E was the mutts nuts.
I love the way they set the garage door at five foot five so everyone can just hit theirs heads on it!
I enjoyed that lads. Thankyou.
Marky boy is the man. Good video lads thanks for the content
Well done I knew he would get it to run again!x
Well done Marky
You should do a series of Ben going round all over the country promoting baxendens car breakers to different car breakers, companies etc
I’d watch that!
Yay!!! Well done lads!!!
I live near York been too four places today for some Easy Start without finding any turns out there lads at Baxenden have cornered the world market in Easy Start great video lads
Yehaw. It's a runner good old cross flow.🤟👍
yes boys was that mcdonalds breaky done it 😂
It’s a runner…minus the body though. Well done
love the increase in production value
great tension , great result !
Cracking old sewing machine ,Kent’s are so strong shame it didn’t run properly,I had 2 out of the box E’s in the late seventies and early eighties they are best cortina except for heavy steering ❤
Brilliant boys it ran next video will it pass its mot
This Cortina will sure need a alot of work and time to have it looking new again ..... I'd look for a donor shell and take what's good and useable to build a useable mk 2 Cortina ....etc 🤩😃😁
It's a lot. There's no such word as alot.
Guten Abend! Hallo! Super Videos! Ich habe auch so einen Ford Cortina MK2 1600E ! Gruß aus Austria! Macht weiter so!
Guten Abend! Vielen, vielen Dank! Ich freue mich immer über Videos von einem Ford Cortina MK2! Mit freundlichen Grüßen!
These are so much fun. Makes me wish I was from up north rather than being a soft rich southerner😄
Well done boys 🚘🚙🚗👍👍👍👍👍👍👍
Nice one lads personally I would of put fuel down the carb it would of ran longer 👍
It's would have , not would of.
@@davidcameron7597 No space before the comma mate, for shame! 😉
Cant wait to see what old crock you pick up next.Did you get any others of that old guys collection beside this one and the escort?
never doubted marky boy
Those twin-choke Webbers were a bastard when they deicided to play up.
Not really nice straight forward set up and sounded and performed lovely
Its heartbreaking to see this 1600E in this state
Had a mk2 replica GT back in the day with 1600, a twin choke Weber, extractors and don't know what cam it had but it ran nicely.
omg Dizzy cap f*ckin pristine pity ford didn't bother making the rest of the car as good I mean it only been sat in a garden for 40 years and most of it is still in the garden 😂
Well done boys
Keep Good job boy 😊
I think we can say she’s a runner so let’s do those stone chips and get it down the road for an MOT! 😎
I was shouting get SOMR FUEL IN THE BAS:@:D THING
Oh yes it will be a runner
Yes it will 💪
Bril!. Nuff said
Yesssss!
The picture shown is a MK ll cortina guys
Get a starting kit together at the ready boys get these started faster ... come on boys
Brake cleaner or juice down the hole. Nice one marky boi 😄😄😄😄😄😄
Well done boyos
That’s nice to go then after revision is good what you got to do now then and will it run let’s see what eventually got to see if it even sounds pretty good actually Marky boy should have a brekkie pension
A cortina video in 4k...just the job........
down here in Bury,, we still got some around... 😮😮😉😉
N x
good job yet again who needs topdon when you got top marky boy knoiws his biz heee
fires just but now addicted to tractor crack ! yeeeehaaa
É pena esse carro estar nesse estado!!bom trabalho
Give you 10 out 10 I wish I had friends like your lot fun
🤣🤣🤣🤣🤣 I'll give it 👍👍👍 did run nano seconds lol
Hey John likes been on camera now 🤭
that's it Cowboy's, burn the starter out
its mint and just needs a Good buffing and side light bulb replaced for mot test
Ben is no 1
Hope to see part 3 restotraion cortina
Good fun that , my granddad had one , where are you from? cheers Matt
Yep. A dash of fuel would have got it going sooner
Brilliant lads I loved your guts and determination too get it going 👏 👏😃
What are doing with all the scrap pallets? I know a lad who will take them all of you👍 One thing I don’t understand🤷 why don’t you pipe a proper petrol supply up, rather than spraying easystart into the engine, I was under the impression Easy start is not good for engines🤔
My Dad use to have a Cortina Mark 2 in the 80's, i can't beleive the State of this vehicle, Has this vehicle been in some sort of fire??
I'll bet that engine has loads of back pressure.you really need a 12v electric fuel pump also on your pipe and can.
Yee haa down the carb 😍
You need a moggy minor electric pump and little lawnmower tank for your 'will it starts'
1600 yeE-haaaa !
We don,t care, crush the blinkin thing. Cheers
You guys are not listening to the engine. When its going to start dont spray it. Over spraying is the same as flooding it. Your supposed to add more spray/ fuel when it sounds like its losing power/ going to cut off to keep it running. Cheers!
I stuck a 1600E engine in our old series 1 Transit, put a diesel bonnet and front on it.
WAY better than the 1700 V4, crap engine!!!
Never really heard that engine run though, bit disappointing tbh.
What pomade does ben use?👀
I thought Marcus would get it running.
yeehaa in the carb lol your all bonkers
oh brilliant musical interlude
shes a runner
Chuck that fukin easy start over the nearest hedge AMATEURS
Pay rise for marky ?
It’s got to rev to be a runner 😅
🤙🤙🤙🤙🤙
should of put petrol in carb and had a bottle with a pipe straight to carb would av went alot sooner AMATEURS!!!
Sort yourselves a boat tank and fuel pump and forget about the easy start, you’ll have more success
Fucx me I remember being only 15 learning to rebuild cross flow engine
No no no start my cup tea if you start it
Could you guys help me get a car for my son he not in work at this present moment he is my carer takes two hours to get to me before it took him 20 mins when his car was ok but it failed mot he had to scrap it i am a pensioner
god i hate those inertia starters
she lives
First 💪
😂💪🏻
Lol.😂😂
After all that didn't get it running fuk about!jokes !!!!!!! For real
Nice one boys , well peachy 🍑
Its a minter