They look really promising for all users except XP Deus.who have been doing the wireless business for well over 5 years. Well done to the Chinese yet again as they have beaten the USA and Aussies to the punch again. Well done Tony for getting them into the market place. Jerry.
Booleys Hello, very good question and one I unfortunately cannot answer, I have just contacted the manufacturer and will update you with an answer asap, best regards..mrix
Booleys Hello again, I have received information back from Deteknix which states that because the battery is just around 400mah It's takes less than 1 hour to refresh the battery by a 1A output USB adapter like iPhone charger etc, hope this helps, cheers mrix
Mike Owen Yes you are correct Mike, these will work with almost all Garrett machines unless they have a slightly different headphone socket like the AT Pro or the ATX etc.
Mike Owen Yes I was told there would have to be another connection for the ace250 but I have now found out its only on the Garrett machines that use a different socket like the AT Pro and the ATX etc, best regards....mrix
Ok cool thanks for the reply. 6 hours isn't enough battery life for me on a 7 to 8 hour club dig, is there any others u could recommend (cheap as possible as don't have much money). Thanks
Mike Owen Many wireless headphones run using bluetooth which will have signal delays etc, there are various wireless headphones around the net which can be had for very cheap prices but you get what you pay for and generally they have not very good feedbacks / reviews etc.
John Turner hello John this specific video is showing the Quest general heads which can be used on any make of machine....you obviously have the version dedicated for the Quest 40.... are you completely sure the headphones are fully charged? You should be getting easily 6 hours + of use.
Hello John, I have found out there is the odd occasion when this happens, when it does simply switch the headphones back on... this should happen not that often and only on the odd occasion, they put it down to outside interference, maybe a mobile phone or other electrical device or other breaking the wireless connection... this is really a fault and simply can happen at times, if its something that`s happening very frequently then I suppose you may have a problem.... best regards mrix
Babbel Bobbel They should be compatible with all makes of metal detector as long as they have the standard headphone jack plug fitting which the Deus does have so all should be fine.
Babbel Bobbel Hello I cannot be 100% sure, I did have the Deus here and could of checked but these headphones are no longer with me at the moment, as I say they should work fine, send of an email to Deteknix who could give you better confirmation, cheers mrix
NEW Updated version for 2018 here - www.metaldetectingauction.com/listing/quest-new-2018-wirefree-metal-detector-headphone-kit/104454
Great demo straight to the point and well explained , thank you
Interesting bit of kit and would be a great alternative to bulky headphones and all fits into a nice carry case. I like it.
Thanks for showing i'am getting for the AT gold soon as they come out. Sweet!!
These work great and thanks for the instructional video! Our customers like the WA's for the AT Pro. We are showing your video in our store.
+Metal Detecting Stuff Hello and thanks for your kind words, its very much appreciated, cheers mrix
Good review. Tried different wireless set ups . Main thing what the damage for this set up.
david hopper Hello David, I am not sure at the moment but dealers should start selling them within the next couple of weeks.
How much are they and are they FM? They look good thanks for the video! Craig
well done mate
Can i use the transmitter with any Bluetooth headphones?
Hello they are 2.4Ghz Wireless so they may work on headphones that are the same, I am uncertain which though, best regards mrix
@@metaldetectingforum thanks.
They look really promising for all users except XP Deus.who have been doing the wireless business for well over 5 years.
Well done to the Chinese yet again as they have beaten the USA and Aussies to the punch again.
Well done Tony for getting them into the market place. Jerry.
Hi, nice review. How much time does it take to fully load the headphones and transmitter?
Booleys Hello and thanks, it only really takes seconds, the pairing is so quick.
Metal Detecting Forum I mean charge the battery
Booleys Hello, very good question and one I unfortunately cannot answer, I have just contacted the manufacturer and will update you with an answer asap, best regards..mrix
Booleys Hello again, I have received information back from Deteknix which states that because the battery is just around 400mah It's takes less than 1 hour to refresh the battery by a 1A output USB adapter
like iPhone charger etc, hope this helps, cheers mrix
+Metal Detecting Forum Great video, well explained and the construction and design look sound, Liam
hi thanks for that , I will put it on my Santa's present list.lol lol hh.👌 😂
nice one
will these work with a garrett euro ace?
So what's going to be different that it fits the ace 250/ looks like it already fits it ?
Mike Owen Yes you are correct Mike, these will work with almost all Garrett machines unless they have a slightly different headphone socket like the AT Pro or the ATX etc.
Oh ok, was.bit confused as u said there bringing it out for the ace 250?
Mike Owen Yes I was told there would have to be another connection for the ace250 but I have now found out its only on the Garrett machines that use a different socket like the AT Pro and the ATX etc, best regards....mrix
Ok cool thanks for the reply. 6 hours isn't enough battery life for me on a 7 to 8 hour club dig, is there any others u could recommend (cheap as possible as don't have much money).
Thanks
Mike Owen Many wireless headphones run using bluetooth which will have signal delays etc, there are various wireless headphones around the net which can be had for very cheap prices but you get what you pay for and generally they have not very good feedbacks / reviews etc.
I've not long bought a Quest 40. After about half hours use.the wireless headphones switches off.why??? Thanks
John Turner hello John this specific video is showing the Quest general heads which can be used on any make of machine....you obviously have the version dedicated for the Quest 40.... are you completely sure the headphones are fully charged? You should be getting easily 6 hours + of use.
mrix what happens is they go off and you half to switch back on again.even when fully charged..
Hello John, I have found out there is the odd occasion when this happens, when it does simply switch the headphones back on... this should happen not that often and only on the odd occasion, they put it down to outside interference, maybe a mobile phone or other electrical device or other breaking the wireless connection... this is really a fault and simply can happen at times, if its something that`s happening very frequently then I suppose you may have a problem.... best regards mrix
Metal Detecting Forum many thanks.
Do they support A2DP do you know?
whats the retail price?
brad ford Hello Brad they are GBP 89.95
any delay ?
brad ford Hi Brad, no delay at all.
are they xp deus compatible??
Babbel Bobbel They should be compatible with all makes of metal detector as long as they have the standard headphone jack plug fitting which the Deus does have so all should be fine.
Ok, thx for the answer.. But its not 100 % sure if they work with the deus, right?
Babbel Bobbel Hello I cannot be 100% sure, I did have the Deus here and could of checked but these headphones are no longer with me at the moment, as I say they should work fine, send of an email to Deteknix who could give you better confirmation, cheers mrix
Babbel Bobbel Hello Babbel Bobbel, I can now confirm these headphones have today been checked with the Deus and they work totally fine.
Okay, thank you very much :)
Will this work with a Minelab GPZ7000?
If it got a jack stick output then yes I'm sure they will.