HOW TO MIX LIME MORTAR [Bricklaying for beginners e.p 6]
HTML-код
- Опубликовано: 14 окт 2019
- A quick video explaining how to mix lime mortar. This type of mortar is used very often in colleges for practising builds with. It is also used in herritage work because its the sort of mortar that was used before cement was widely used.
Bricklaying for beginners playlist - • ESSENTIAL BRICKLAYING ...
House build playlist - • DIY House Building Cha...
-------------------Find me-------------------------
Facebook - Rodian-Montague-541575062933517
Instagram - / rodian_builds
All music is from - www.epidemicsound.com
The tools i use:
Builders Bucket - amzn.to/2TNnIAk
Level - amzn.to/2D33FXw
Level - amzn.to/2S6pQqb
Trowel - amzn.to/2HTBjVm
Big Betty Bosch - amzn.to/2X541Fs
Impact Driver - amzn.to/2BgQGS2
Combi Drill - amzn.to/2S9kY3m
Hammer Drill - amzn.to/2S8mC5a
Belt Sander - amzn.to/2t1H0WG
Orbital Sander - amzn.to/2Tpjdf0
Hammer - amzn.to/2G6ytdL
Masonry Blade - amzn.to/2T1WWCS
Reciprocating Saw - amzn.to/2SY6YFb
Tape Measure - amzn.to/2Sc4rvO
Pencil - amzn.to/2Sc5agw
Screw Bits - amzn.to/2RBYhzU
Masonry Drill Bits - amzn.to/2Tsw8gk
Rawl Plugs - amzn.to/2RBSOZR
Saw - amzn.to/2G7zcv9
Belle Minimix 150 Electric - amzn.to/2IexHxj
Stand --------------------------------- amzn.to/2DIlwn0
Belle Minimix 150 Petrol - amzn.to/2DyxkI4
Filming equipment:
The camera I use - amzn.to/2TtIc0R
My main vlogging lens - amzn.to/2Rxzr44
B-roll lens - amzn.to/2TtL9yx
Tripod - amzn.to/2t1n1aV
Mic - amzn.to/2D5A7Z7
ND Filter - amzn.to/2Bhs4Z2
Action cam - amzn.to/2UTwBIw
These are all amazon affiliate links. It does not cost you any extra to purchase through these links but amazon does gives me a percentage. Хобби
Great advice. Simple, well-explained with no bla bla. I'm just off to grout my first stone wall. Thanks.
Brilliant, simple, just the info I needed.
Thanks Rodian for a well filmed and taught video training guide. I've been working with Sand and Cement for ever and, have thought about working with lime as a training guide to pursue working more with cement properly, when necessary, later. You have just persuaded me to give it a try as I tend to use small amounts for small jobs for now. I appreciate the enthusiasm and trusting assertion towards your trade skill...
I love your videos, very informative and you make it fun and interesting when you are explaining. Keep up the great work
Love what your doing, as a complete frank spencer your helping me and now im doing a weeks bricklaying course. keep up the great work.
Hmm Betty 😂👌
Brilliant video that describes each process perfectly
Exactly what i needed to see mate, very informative. Thanks
ONE OF THE BEST VIDEOS ON YOU TUBE , WELL DONE MATE
You can also use it for beam filling on older roofs where the original wall plate is on the inside of the wall and the roof extends down over the eves, it let's the walls breathe and stops condensation and dampness, alot of builders use a cement based mortar to beam fill which defeats the purpose of the lime mortar
Thanks for the great vid really helped me out
Just what I needed. The brickwork around the front door of my Victorian semi need repairing and a lime mortar mix is required. Thanks
building some stuff for my grandparents, appreciate the info
Yer on to something with this channel..👍
Great, thanks fella 🏴
I was scratching my head wondering what they used in the Masonry Heater Association anual meetings in order to do the projects and then disassemble them, so the bricks can be reused in the next year meeting. Now I know, thank you sir
Putting two parts sand in the bucket then lime then two parts sand would help stop the lime flying about.
Oi.. Greetings from AUSTRALIA. Good video Thanks Rodian.
Very nice to look! even if not buildings
Thank you for sharing this information I am about to fix up my 1st place in Portugal 😊
Great Man
That's lovely honey-coloured sand! That makes a gorgeous coloured compo for a light sandstone like the buildings in Bath for example.
I agree, where do you find sand like that?! Everything around here is gray-ish
@@Ev-eq8zn daaaaaan saaaaaaaf
Hi just done a repair to our geordian terrace house, mortar redish sand. My repair has come out white. I used a 3 sand to 1 lime mix. What I do?
Elf & safety Great video thanks.
Gloves are a good idea. Lime really shreds skin.
Lovely drop of jollop!
👍doing great bud
Cheers buddy 🧱😁👍🏻
Love these videos, I'm a bricky labourer at the moment but heading to college next year to start an apprenticeship 😊
Would love a video showing how to add colour to a mortar like this with the pigment powders, can you actually get them coloured evenly if mixing by hand?
Too wet, lime is always stiffer and the sand needs to be less uniform, mix sharp and plastering if you can. You should try mixing it with just enough water to bind, leave it overnight and then knock it up with a lot of beating, pick it up and throw it, slap it around. Should be more like putty than brick mortar. I use a mill mixer for this bit. And add a little wood ash from your fire, at 5-10% of the lime. makes it ever so slightly hydraulic and is how it was used traditionally, bits of crap from the kiln. I use it and sell it daily.
Thx
the best way is using natural hydraulic lime (NHL 3,5 or NHL 5) not pure hydratized lime
@@niktznany8871 no it's not, as it's unpredictable and can cause problems with some types of stone, especially in damp environments. A pure lime mortar which has been made hydraulic is far easier to predict with regards to impurities like sulfates and nitrates. As well as binding the free lime better, preventing lime leaching and other minerlisation like the formation of gypsum on the surface of sandstone.
@corindoyle so you're referring to 'hydrated masons lime', correct?
I want to knock up my own repointing mortar for my home's foundation. I've come up with a materials list of:
2 parts soft sand
1 part sharp sand
1 part hydrated masons lime
For a nod to authenticity I think I shall add the 10% wood ash.
Am I on the right track?
@@jimmeh213 yeah that's the one. But I'd suggest 1 kiln dried and 5 sharp sand as soft is the wrong shape. It's round not angular. If you can swap 1 of those sharp for some crushed stone dust even better. 5mm to dust limestone, granite or slate is good and you should be able to get something like that. Good luck
Love these brick videos, have you done a vid on jointing up your brick work?
(I'm new so don't know what videos you have done) 👌👍
Cheers pal 😁👍🏻 I did one about a year ago but it is in dire need of being updated so there will be a new one coming in the next couple of weeks.
Great video, thanks. Just doing some repair work of what I think is lime mortar. Went to building merch and he suggested using yellow sand and white cement. Thoughts would be much appreciated
Dustify = powder
Make a volcano ?
= hole 😂.
Thanks, young fella, for the mix. I will use that mortar this weekend 👍
Hi Rodian, can you tell me the name of the sand that you used in this video please? Keep up the great work!
I put a layer of lime/sand plaster over a stone fire place a couple of years ago. I used my hands to smooth it, no gloves. For a week my skin was so messed up and swollen I could hardly pick up a cup of tea. I guess that's what lime does? I won't make that mistake again.
Thanks for the video. As a beginner, it's good to get a not too complicated look at how people do these things.
Could I use this mix for a slow setting internal plaster? I am currently using nhl lime but it's setting too quickly.
Could you use this mix for repointing? Thanks.
Unable to source hydrated lime in New York City. Do you have an alternative?
Ahhhhhh memories of the lumpy shite we had to use in college ! Re mixed in a pan mixer each day . I’m surprised any of us managed to get anything built with it .
You bucket mix exactly the same as me ..... opposite of the mixer , water last 👌🏼
New word of the week Dustifyed 😆👌🏼🧱👍🏼
We must have been lucky, our stuff at college was pretty good. The good ol 90° bucket mix technique👌🏼The best word of the week🤣🤣🤣
I remember the pan mixer . Happy days
Hi, i would like to know how this will work with rice soup. They used it for the great wall of china and therefore and cuz it has been proven to work...I'd like to use the chinese mortar recipe for my own house... Do you happen to know anything about it?
What NHL lime is that? Can you use the same ratio of sand to lime for render on brickwork?
Can I apply this to repoint a garden wall, using a mortar gun?
How can i use hydrated time to fix small or big cracks in concrete ceiling for exterior and interior concrete ceilings?
Can you use beach sand and wash the salt out first?
Thanks so much for the great video, sir! I really enjoyed your clear and concise explanation of everything. As a total newbie I am going to attempt a masonry cook stove. The plans call for using a 1 to 3 clay/sand mortar mix. How does clay mortar compare to lime mortar? Will lime mortar hold up to a fair amount of heat? Thanks 😊
How did the project go? I've been looking at using clay mortar for a wood oven.
Well, it seemed to behave similar to how the Master was showing us in the video, but I don’t think I’d use it again. I used the stove for two seasons, mainly for heat (I live in the northeast corner of the US) and I have several areas where the mortar has cracked. It is possible that I messed up some of the batches but I tried very hard to measure everything consistently. I think I might have to dismantle part of it and try resetting it with Rodian’s lime mixture 🤔. Thanks for asking 😊
where can I find information on how to use a Refina roller pan mixer to mix Calbux 90 lime bas d plasters ?
What brand is this Sand you are using
once you take it down you can knock it back up right ?
Have you ever tried using quicklime and making a hot mixed mortar? I'm trying to learn more about the properties of traditional mortars.
Can I use m sand and lime for brick making
not forgetting that lime is way better for the environment.
Can U reuse it 1s it's gone off or will U need to buy more lime and sand
Great demo Rodian.
Do you add anything to make the mortar more workable like a bit of washing up liquid or Feb Or is a lime mix very easy to work with?
Which trowel do you recommend for a 63 year old beginner?
Thanks Rodian
Don’t need to the lime is the ultimate
How long does it take to go off? A month or longer?
How many days is the curing time (watering) for lime mortar brick wall..??
HI, THERE CAN YOU ADD SBR TO THE MIX?
Thanks I’m a self employed pointer never knew it would fall out in 2 years if u didn’t use lime
Another good video mate. Hows the house coming along?
Cheers buddy. I'm getting quite a few comments asking about the house so i'm doing a video about it. Should be up in the next week or two
I'm a DIYer and have mixed a bit of mortar by hand for pointing up and filling some old vent holes with repurposed blocks cut to size, and my hand doesn't half ache, sometimes to failure.
Is this something that gets easier the more you practice mixing by hand? It made me feel like I had carpal tunnel issues or something.
You can get those paddle mixers or a cheaper alt is the drill attachment kind. Mixing by hand does get easier the more mixes you make, if that makes any sense.
Does this set hard over time? How hard?
Great video, would you use this same mix ratio to plaster internal walls or would it be different?
I would use specific plastering sand and cement with a plastering additive to plaster walls 🤙🏼🧱
@@RodianBuilds great videos, any tips for plastering with lime mortar
@@RodianBuilds no cement on solid walls lime all the way
Would barn lime work
So this isn’t a mix you would use for actual construction is it? I though hydrated lime was only just used as a plasticiser as opposed to hydraulic lime which is used in construction?
2 questions: could I use this mix to practice with my actual bricks, or will the bricks become too dirty afterwards? So, do I need practice bricks as well? Second, can you just use sand and water to practice, or would that just be too unstable? Thanks love your videos
This mix is only for teaching purposes. The lime is essential.
May mix Mud + Lime?
What is the granulation of the sand?
I am making an experimental Russian wood stove (500 bricks.) I am using 3 parts sand, 1 part lime, and 1/2 part Type N mortar so in a year or so... I can break it down and save my bricks. Each brick should scrape off in 30 seconds or so. For the 1,000 degree F firebox with refractory bricks I am using 3 parts sand, one part lime, one part wood ashes, and 1 part refractory mortar which is expensive. Lime is cheap. That should "scrape off" the yellow bricks a year from now too.
👍🏻
SO whats the difference between lime and cemet mortar?...and when to use which
did u not need to put cement in the mix???
What colour does it dry??????????
Earth may likes these things .
Hi 👋🏼 I could use this mix for repointing an old stone wall right?
Yeah if you want it to all wash out lol
Please note: this video is showing a lime-sand mix for teaching purposes, allowing the resulting structure to be dismantled after the students have left. The bricks, and even the mortar, can then be easily recycled. This is not a mortar recipe for permanent construction.
whats best bucket ratio for above dpc.. 5/1?
Depends on the brick and how soft or hard it is
Hi, good video but I have a few questions.
Is lime in this video hydraulic?
How many days does it take for your mortar to go off?
How strong this mortar is in psi?
It's hydrated mate. You shouldn't use hydrated lime as a mortar. It's only used as a plasticer. If I was building in lime I would be using an Natural Hydraulic lime 2-3.5
@@LiamGrubby definitelly yes! Another good option is using lime putty.
Funny color of sand, I had a terrible time finding something about lime mortar that just uses lime. No cement! I just white washed my little choza- (Mexican cottage lol) now I want to mortar some brick I got for free- our sand is white- I have to screen it first- they don’t sell it in bags here-
Lime ended my career on the trowel its in cement as well and some sands i think. Gloves all day long.
Without cement?
When you tear it down the next day can it be rehydrated and used again?
Yes
I'm confused. DIY brick layer here, about to build a fireplace so got some hydralime. Been told builders sand is no good it had to be sharp sand? Was going to do a 1:2:8 mix (2 lime). Advice appreciated 👌
Quite so, have a look here : www.roundtowerlime.com/post/guide-to-mixing-natural-hydrualic-lime-mortar (assuming you are using NHL 3.5).
Can I use a drill to mix lime and sand?
No. drill is for making holes. But you can use a mixer attachment to fix stuff.
Mixes have to be more accurate when using lime so shovel quantities should not be used! Use a container measure. Mix was too wet too.
Do you happen to know the right ratio when using lime putty (stored under water)
Hmmmm what's the difference if you use ratio of 3:1 instead of 4:1...? Can anyone tell
“Mix it like cake.” Actually, I would rather have the cake. Chocolate cake and a glass of milk would be perfect!
All day long 🥮🍽🤣
stfu
Hi, I've bought bnq hydraulic lime and building sand is this all I need for re pointing my chimney stone work?
Hydrated lime
B&Q don't sell hydraulic lime as far as I am aware 😀.
I've read sharp sand is better, but having pointed my front wall, I think a mix of sharp and building sand would be easier for pointing. I did 2.5 sharp to hydraulic lime, it was quite coarse
Am i correct in thinking mortar lime in shops already has sand mixed in ?? If so, where do i get just bags of lime and what brand names are recommended ??
Hardware stores
I’m confused. Is the mortar used in this video just for demonstration purposes or is it what would be used for a real job? It sounds like this mortar takes a long time to go hard but that it is more appropriate for the type of job I am facing (repointing some areas of my Victorian era house). Can anyone advise, please?
This vid is practice mortar. I.e never sets.
The lime used to do building work is differe t to the lime in this vid
Lime terms are confusing. Air lime is high calcium (low natural impurities to act as pozzolan) and comes as a putty or hydrated lime powder. I have successfully used hydrated lime powder slaked it as a putty for several days or weeks, and then used it with sand to render a cob oven for weatherproofing. Such hi calcium lime hardens through carbonation as it reabsorbs carbon dioxide from the atmosphere, so it needs to be protected from weather for several weeks and does not reach full hardness for months or years.
Natural hydraulic lime (NHL) comes from limestone containing clay impurities and has a hydraulic set similar in some ways to Portland cement. NHL also frequently comes as a hydrated lime powder, is still vapor permiable (breathable) and more flexible than Portland cement, but goes off faster than air lime. Either high calcium air lime or NHL is often used as the binder in mortars when repairing historic buildings.
I find lime mortar, with only a sand/natural hydraulic mix to be horrendous. Slaked lime is a must, that putty is essential. NHL is ok but it’s nothing in comparison, especially for rendering and conservation purposes
is that lime stone
How long can I use one mix , how many time can i reuse one mix ?
It depends how hot of a day it is, just add water if it starts to go off while you're using it. I re use mine as many times as I can as long as it doesnt get to hard
How can you make sure that every mixing lime mortar will be in the similar color when dried , please ?
Consistent ratios
Adding cement would you just put 4.1.1 sand cement lime
Hi rodian, what is NHL? Thanks for the video
Natural Hydraulic Lime. It is made from limestone that naturally contains impurities that act as a pozzolan. The higher the number the more hydraulic it is. NHL 2 behaves closer to lime putty, NHL 5 behaves closer to cement.
Hi Rodian and other experiencec builders in here.
So when working on period built properties, I hear folk speaking about not using cement based products, use lime instead... Is this the method they are referring to?
Lime based plasters and mortars etc?
I'm not a builder by the way, just a very interested painter 😁🍻
They're referring to NHL (natural hydraulic lime) which should always be used on old buildings because it allows the walls to breathe preventing damp. Hydrated lime is a different thing, it won't set if you make mortar from it so it's good for practice work.
@@AM-lf2iw thanks A M. I've listened in on a few conversations but kept my nose out from asking questions! So they use that instead of cement? A surveyor was mentioning the other week to the customer about their plasterer using lime... makes more sense now
From what i've read i believe you should use whatever the original muck was made of.
I have a Victorian, sandstone building that's previously been pointed (ouch - big-time) using sand and cement. I recently contacted 'Hanson' (Cements, Concretes, Aggregates, Limes etc) and they provided me with the information I'd not had a direct answer to in around 3 years, namely, what type of lime should I be using to re-point my crumbling sandstone building? 'Not had a direct answer to', is predominantly down to suppliers still running in 'builders-use-cement' mode - they simply weren't positive or just didn't know.
Quick history: Tradesmen stopped using original building materials (limes etc) around 100 years ago when cement became widely available, preferring the new, 'with-it' 'cool' stuff to carry out repairs, and when buildings like mine needed re-pointing, guess what they used?
In fairness to these tradesmen, they couldn't possibly know back then that using cement to point old properties was in fact damaging them, extensively. It's my guess that had they known what horrors they were handing down for future home owners they'd never have used the destructive cement mortar.
Destructive - why? Well, it seems the old limes would allow rain water OUT of the brick/stone whereby maintaining the integrity of the stone, where cement mortar was actually holding the water IN - boom. Only after a few decades passed (or less) would you see the results of these destructive cement mortars - the stone in these fine old buildings spalling and crumbling - while the rock-hard cement remained, in pretty little squares on your wall. You'll probably see graphic pics online showing someone's hand gripping a strap of cement mortar while the actual stone it's been fixed to has decayed into the background - mine isn't quite at that stage, but hold my beer..
Anyway, the guy in Hanson emailed me back and advised I needed a Natural Hydraulic Lime (NHL) 3.5 (better check your own, personal requirements).
In the 3 or so years I've been promising to repair my Victorian building, there's been a fairly dramatic increase in very useful and helpful information around the 'mystery' of lime. There's now much more knowledge, more websites and of course a growing resource of RUclips people offering fantastic advice. Among my favs, I've been watching a relatively recent channel 'GMT Pointing Specialists Ltd' who's very passionate about the use of correct materials on building repairs - limes - and damn scathing of those persisting with cement mortars on traditional buildings. GMT (Glenn) is informative and willing to offer advice - just like Rodian in his excellent videos. I have no affiliation with GMT or Rodian but have gleaned so much from these people that I feel it will benefit both them, and us, by promoting their work.
Do the research before embarking on major stuff , you'll be enlightened, enriched and will most likely be the guy/girl responsible - in the last 50 years - for saving your property, with the additional benefit of increasing, considerably, the selling price of your property.
Is this the type of mix you can use for concrete blocks?
Wondering the same
Training mix yes. Proper building mix will be NHL and sand. Hydrated bag lime will never set
From what I understand the NHL will even set under water?
Stihl 38 would the mix you mentioned be fine for ‘plastering’ over bare brickwork as well as re-pointing?
I use NHL for building with reclaimed brick.About 3 times the cost of cement but is more eco friendly so is a big hit with some customers.
@@brethrenphil how long could it take to set this time of year? And what kind of paint could I use on it once cured? Cheers
Hi, any pointers for best mix and tips for reporting a chimney?
NHL5, plaster and sharp sand, and not too much water is what I've picked up on videos on the net.
Watching just 2 hours before exam😢
Can you use this mix for re pointing brickwork?
You shouldn't use hydrated lime for pointing. Hotlime, lime putty or NHL2-3.5. The lime he is using should only be used as an additive for cement. If your building was built before 1919 then avoid cement as it destroys buildings
Can this mix be re-used ?
We used to at college hydrated lime is basically a plasterciser and needs Portland cement to make it go off it’s hydronic like that will go off on its own
I use a Portland Lime mix on my basement walls. 2 to 1 mix with a Acryl bonding agent. You knock all the Spaulding down, steel brush the walls and sweep any remaining dust off. Spray the part of the walls your going to skim with Acryl 60 bonding agent then mix your 2 to 1 mix and start chucking.
Do not take grinded lime stone or powdered lime. Take lime stone big blocks and put that in water, it will be more stronger.
Only use Hydrated Lime, not Agricultural (Garden) Lime, for teaching students bricklaying skills. This mix is not for permanent construction. Use Hydraulic NHL limes for permanent applications ( NHL 2, 3.5, and 5).
Can u mix lime with cement to make the mortar a lighter colour?
Yes u can .just on what spec of the job, ratio of mix u do i usually do 6 sand 1 cement 1 lime . .but iv never mixed cement with in french lime
Anthony said it 👍🏻 I've mostly done 5 sand, 1 cement and 1 lime. Dont have to use plastersizer when using lime 👍🏻😁🧱
@@RodianBuilds it's only how ive been taught
You can do, with natural stone we tend to go for a 6 sand 1 lime 1 cement mix or you could use a hydraulic lime such as a nhl 3.5 at a 3:1 mix with no cement, that will give you a bright coloured mix.
Using old reclaimed bricks or stone i prefer mix 3 sand 3 sharp sand 1 cement 1 lime mix too
I have a 5 gallon container of premixed white lime mortar. I only used a small amount of the lime mortar for a repair job on the interior of my stone basement wall. My exterior wall has ribbon joints that are tan in color. Is it possible to add pigment to the lime mortar to match the color so I can use it on the exterior ribbon joints? I am concerned that any pigmentation I add to the mortar will bleed out over time.