Manual Cleaning Xiaomi Robot Vacuum X20+ and Station

Поделиться
HTML-код
  • Опубликовано: 17 янв 2025

Комментарии • 26

  • @shayh4485
    @shayh4485 3 месяца назад +1

    Thanks for the video!
    Very good explaination ❤

    • @jingz
      @jingz  3 месяца назад

      Thanks! 😀

  • @BestmankTv
    @BestmankTv Месяц назад

    Can't I just was the brush cover and the brush with water(3:05)? Or should I stick with the dry cloth instead?

    • @jingz
      @jingz  Месяц назад

      I think you can wash it. The cover are made of plastic.

  • @duleopasni
    @duleopasni 8 дней назад

    Should the dust bag from the station be cleaned/emptied?

    • @jingz
      @jingz  7 дней назад +1

      By right, should be disposed once full. In one of my video (ruclips.net/video/5q8E2AxHw7A/видео.html), I removed the dust from the dust bag and reuse it.

  • @merveadam4960
    @merveadam4960 2 месяца назад +1

    How to clean the filter section on the top cover of the robot, please make a video for it.

    • @jingz
      @jingz  2 месяца назад +2

      Ok. Will do after I figure out how and where the filter is. 😆

    • @merveadam4960
      @merveadam4960 2 месяца назад

      filter, there is a cover on the robot under it​ @@jingz

  • @SHAWNGOZALI
    @SHAWNGOZALI 3 месяца назад +1

    I have one and i always use the self cleaning

    • @jingz
      @jingz  3 месяца назад

      👍

  • @krystianstepien5835
    @krystianstepien5835 3 месяца назад

    Are you happy overall ?
    How`s the mopping goes ? Are the pads always wet or dry after some meters ?

    • @jingz
      @jingz  3 месяца назад

      Yes, overall I'm happy using it.
      The pads will still be wet after some meters.

  • @SherLynn-b7b
    @SherLynn-b7b 2 месяца назад

    Does hair gets tangled?

    • @jingz
      @jingz  2 месяца назад

      Ok for me as I don't have long hair.

  • @merveadam4960
    @merveadam4960 2 месяца назад

    Is the cleaning cloth you use dry or wet?

    • @jingz
      @jingz  2 месяца назад +1

      It's wet.

  • @Deniyanuar09
    @Deniyanuar09 3 месяца назад

    How to make the robot do vacume and mop some are like edge wall, seem always they skip them ?

    • @jingz
      @jingz  3 месяца назад

      There will be edge between wall and robot that robot cannot be mop.

  • @errgo2713
    @errgo2713 2 месяца назад

    Any tips if it stops releasing water when it's doing the mopping?

    • @jingz
      @jingz  2 месяца назад

      The robot wet the mop pad at the station only. Robot does not store any water.

    • @errgo2713
      @errgo2713 2 месяца назад

      @@jingz Oh wow, I didn't realise this. But I think I solved my issue. The mop pad will not stay wet if the clean water tank isn't kept almost full, as even if it isn't yet empty it may not wet the mop pad properly.

    • @jingz
      @jingz  2 месяца назад

      @@errgo2713 Is it? Mine will complain if the clean water tank is very low and it will not wash the mop pad.

    • @errgo2713
      @errgo2713 2 месяца назад

      @@jingzPerhaps there might be an issue with its water level sensor, in my case.

  • @mahen587
    @mahen587 2 месяца назад

    Do you add cleaning agents into the tank?

    • @jingz
      @jingz  2 месяца назад

      No, I don't add.