2021 Can Am Outlander 850 Oil Change and Grease
HTML-код
- Опубликовано: 29 дек 2020
- Oil filter can be a bit tricky to access be sure to check it out! ;O)
The initial oil change and greasing the chassis on my 2021 Can Am Outlander 850 xt. Oil filter can be a bit tricky to access be sure to check it out! Subscribe for more!
GET AN OIL CHANGE KIT: amzn.to/3rCCGKF (affiliate link)
BLUE TORX BIT DRIVER I USED: amzn.to/2XRlVho (affiliate link)
Orange panel / plastic rivet removal tool : amzn.to/3yrzOnk (affiliate link)
As an Amazon Affiliate I earn commissions from my links these small commissions help me to produce the helpful content on my channel
If you found this video helpful and would like to show your appreciation hit the ($Thanks) button to leave a tip! :) 
Авто/Мото
great video but its way less trouble if you go on the underside of your front right wheel, just pop that inner fende well and thats it
I think this is the most professional how to video I've seen. Thanks for taking the time to have stable and up close shots and for sharing your knowledge. Subd
Thank you for the view, sub, and kind words! 👍 There will be more content on this machine in the future!
Excellent! I’m new to atv’s and their maintenance, this video is very helpful and easy to understand. Something as simple as showing which way the filter goes in is great for us newbies! 👍👍
Thanks Kris!!!! you're comment is the whole reason I started my channel its always nice to hear I'm helping people enjoy their passions!
Doing my 1st change on My 21 outlander 650 XT Mossy oak edition once the kit comes in. This video earned a thumbs up and subscription. Thank u.
Nice machine, I really like the wheels and seat on that edition! Thanks!
Great video. Best I've seen so far showing the grease points and the oil change is great too.
Thanks! Appreciate the feedback, I plan on making more videos with this quad in the future!
@@bikermike please do. I'd love to see all the regular maintenance. I'm handy enough to do it myself once watching a video or two.
Liked, subscribed and following btw
Great video. Thank you so much for taking the time to do this.
Absolutely perfect video for me thank you so much! I knew there had to be a way to oil change without taking off the foot well!
Glad ya found it helpful! It’s a bit of a chore to do the oil change for sure!
Thank you so much for this video! I purchased a 2020 1000 xt and this was so very helpful with finding all the grease points etc. Please make more videos :-)
I Gotta do my brake pads next lol ;-)
Thanks Stacey! Glad to hear you found it helpful! I will be making more videos in the future as it needs more maintenance/repairs. Brake pads shouldn’t be too hard to do and I did hear they can wear out fast too!
This is some very good information because I have a 2021 outlander 1000
Thank you for taking the time to make this video
:)
Glad to help
Thanks so much
I bought the exact same machine back in October and I was wondering how to get all this done.
Thanks for this. You definitely saved me a massive headache.
Not the easiest oil change I’ve done, lol.
NP
Not as bad as my snowmobile believe it or not!
This was good straight to the point..thanks
Good video. Very detailed. Enjoyed watching.
I have a 2020 outlander xmr1000r. Great video, easy to follow. I dont do this often, but I am gonna like and subscribe. Thanks!
Thanks! I’m no big entertainer but I do try and make useful content for people!
It's for the gearbox plug
My 2021 XT-P 850 and I thank you. Tackling this myself this week.
Glad you found it helpful!
@@bikermike got it done today. Thanks again. Had a bit of an oil leak at the drain plug so hit it with engine degreaser and the power washer, put some more torque on the plug and all is good now.
Great video. Wow, a lot more involved than I hoped. Gone are the good old days where there was no trim to remove and the engine was in plain sight.
Thanks, and yes it is more involved then I’d like it to be as well! Believe it or not it is way simpler than the oil change process on my 4stroke snowmobile!
The good old days are not gone, that's just Can- Am. I don't think most are that involved. I know 3 that aren't.
This is a very informative video….thanks!
just a tip says screw oil filler stick in to check full level if u just let it sit there not screwed in if its at bottom mark it will e full when screwed in
Not necessarily "difficult" but there is no excuse for making basic maintenance this much of an endeavor. I mean I can see having to do some of this to change gear oil a couple times in the machines life, but something as basic as changing the oil should be easy to do. Clearly designed to scare most owners into towing it to the dealer each time.
yep, and to keep me from buying one despite thinking its the superior quad overall. I like being able to do a quick refresh after aggressive riding especially in mud
You don't have to remove all the stuff he did. You remove one panel in the right hand wheel well and you have access to the oil filter cap. This is NOT the way to do it.
Got to be easier then that ??!?? My 2011 650 Outlander takes ONE BEER to change the oil
Absolutely crazy to have to do all shown to change oil/filter. Polaris is simple and easy to get to. Why would anybody buy a Can Am?
dobry film ! dzięki pomogłeś mi !
Bravo excellent video
Thanks very helpful
BIKER MIKE, THANK YOU. That's just so f*ck*ng helpful.
Awesome video! I've subd.
Thanks for the sub!
Awesome
I have a 2015 outlander 850 bought it New and never used it...only had 200 miles on it but now I started riding every weekend
Just brought it for my first service they changed oil plus the transmission oil and spark plugs.....I wonder if they actually did everything
The panels were not installed back correctly they were not not aligned
They charged me $398
ThanKS for this video
It's alot for a oil change. I wish there was some way Can Am could make it easier.
How difficult do you want to make the oil change for the customer?
Yes.
They did make it easier…..it’s called a Renegade haha
Thanks for the video! Mine has been shipped.. Good God, something else to maintain.. Well can't be worse then a boat! lol
Hahaha I totally hear ya... its all worth it though! Enjoy the new ride!
Watch some more video's
Only panel that needed to be removed is the one under the front fender
Any chance you can get t the oil filter just buy removing the side plastic only? When I change the oil on a 2010 Outlander I can still get to it, just take my time.
I’m very curious is this the same procedure on the 2020 models also?
Awesome vid.
Just a question what was the copper metal washer for in the kit? About to do mine. It looks like you didn’t use yours. Is it possible for a side by side?
Thanks! Ya likely a different model..
Very informative video very helpful I have a 650. I noticed on your handlebars you have a mount for a GoPro where did you get that?
Thanks! I appreciate that! 🙂
650 would be great engine as well! Lots of power!
The mount is for my phone. It’s made by RAM.
If canam made maintenance more reasonable I'd buy one tomorrow... I can change diff and oil on my grizzly before you get all your plastics off :(
Awesome video ..
Here in Perth dealer want nearly $1000 fir that service
Thanks appreciate the feedback!
Wow! seems pretty rich $$
I cannot understand why Can-Am makes its so difficult to change the oil and has so many grease fittings!
You don’t have to do all the things he’s doing, you can take the panels in the wheel well out to access the filter cover. Takes me half he to change the oil.
It is not difficult 😜
Awesome job thanks. How many liters of oil come in the kit do you need to buy extra ?
Kit came with 2 liters (quarts) and a little extra bottle. It was more than enough for my 850.
What is the other washer for?
What is the orange tool to take pin points out called? Great explanation on the video btw helps a lot 💯
Thanks, I'm glad to hear you found my video helpful!
It is an automotive panel and plastic rivet removal tool.
Here is a link to one at amazon amzn.to/3yrzOnk if you choose to get one there I'll get a small commission if not no worries you can get them at almost any auto parts store.
Removing the cover one screw at a time will surely warp it. Better to back each screw out a quarter to have a turn, the same way when tightening the cover down.
Thanks for the video. The oil filter housing didn't come from the factor with the gasket on my 2021 Outlander 850 Max... Do you know why that might be? Should I have not used the gasket?
Seems odd for sure, did it get stuck to motor? Was it leaking at all?
@@bikermike I looked closely at the motor, filter housing, and the ground… didn’t see one. It wasn’t leaking. Strange.
Oil change interval ate a 1000km, I’m asking??
Mike, Dan here from Saint John NB. I have a 21 Outlander Max XT 650. (1st ever Bombi wheeler.. always a Yammi guy before this one). Where did you get your service manual? The stock owner’s manual is pretty week lol..doesn’t even give oil capacity. Great vids btw, I’ll be doing a few more on this bike on my channel soon (GnarlyChicken). I’ve only got 104 KLM’s on mine and decided to check the oil level….had to suck out over a 1/4 litre of oil!!!!Dealer musta got a little overzealous when doing the psi…And this is why we do our own maintenance!
Thanks Dan,
My owners manual came with Quad, it is ok but its not a service manual either..lol..
Im a Yamaha fan myself too!
Yes need to run bike for a while and check when warm to get proper oil level.
Im pretty sure you'll be extremely happy with the machine and its performance. It will have some big shoes to fill compared to the yammies reliability but time will tell, and so far so good with mine!
@@bikermike Thx for replying bud. My owners’s man says to check oil level when cold….you check yours when motor has warmed up?
@@GnarlyChicken Actually I think you're right, Its my sled that needs to be warmed up when checking it. got that mixed up.
@@bikermike Yes, my Nytro was the same
@@GnarlyChicken Great sleds though!🤙
Hey did you get one or two keys with your 850 I just got my 2021 850 XT my dealer said they come with just one key but people tell me they come with two thanks
I just got one. I think they said the use to come with two..
What did you tourque the drain plug to?? 22ft/lbs sounds high
I honestly just did it by feel. If that is whats spec'd by the manual it doesn't seem too far off. 8mm bolts on triple clamps are 15-17 ft lbs if I recall correctly. I'd just do it by feel if your comfortable with that.
Where did u get the blue screwdriver from
My Dad got me that for Christmas one year! :)
You can get one on Amazon! I just put a link in the description if you would like to use it. If not no worries just get on amazon! ;)
It is a quality item too! Happy wrenching!
Thank u
What is that front rack bag? I dont see it in the accessories catalog
SKU 715003759
@@bikermike thank you, great video too
I have a 2020 450 outlander, should be the same eh?
Not sure, tbh. I’ve never worked on one.
No need to even remove the gauge from the cluster . I always just pop the entire gauge housing off
Early in video... but removing display for oil change?!
Why didn’t you choose full synthetic?
Still kinda breaking it in, probably next oil change.
@@bikermike I was just curious I’m doing an oil change at 25 hours cause I figure it can’t hurt and I bought full synth from dealer to do it and was looking things up and had to ask what made you do the 5w-40 over the full 0w-40
@@punkywood3037 Full synthetic isn't as good for break in. You want just a hint of wear to get everything seated just right. When breaking in small engines like my generators, I use regular dinosaur oil for the first 4 oil changes but change super frequently. I've got a 2021 XT-P 850 and I'm changing oil this week at 19.6 hours. Semi synthetic this time for me as well. Next change will be around 50 hours and I'll go full synthetic at that point.
@@punkywood3037 ow-40 for winter😉
You definitely weren't early. First service is at 250km or 10 hours
Wow! I wish I didn’t sell my 2014 grizz 700
It is kinda involved.... the grizzly is a great machine for sure!
I sold it yesterday and bought a 2021 650 xt, nice machine though 👍👍
@@masedadsgamingadventures6556 very nice! I’m pretty sure you’ll like the v twin power a lot more!
It's a pain in the a$$, I think I'll just send mine to the dealer.
Sometimes it’s worth it!