As a proud owner of the mount and rings I can say that it's probably the best system I have ever used. I hope in the future you can release a ring cap for the match rings to take advantage of the diving board accessories.
The biggest problem I have encountered is that many of the top accessories interfere with elevation turret manipulation. Or in the case of, say a Vortex 4000, you cannot press the backlight button easily if your eye relief forces you to mount the scope forward on the rings. Spuhr and Gray Ops have relief cuts in their system to mitigate this issue.
Наука
As a proud owner of the mount and rings I can say that it's probably the best system I have ever used. I hope in the future you can release a ring cap for the match rings to take advantage of the diving board accessories.
Looking good guys!
Do you have a Pic rail for Tikkas that take advantage of the pin hole in the receiver?
The biggest problem I have encountered is that many of the top accessories interfere with elevation turret manipulation. Or in the case of, say a Vortex 4000, you cannot press the backlight button easily if your eye relief forces you to mount the scope forward on the rings. Spuhr and Gray Ops have relief cuts in their system to mitigate this issue.
Is there a way to mount a RMR on a 45 degree offset from the optic? (i.e. the 3 o'clock position on the ejection side)
dang. want.
High or low diving board for gen 3 razor 6-36. Not sure if low clears 56mm objectives
@@darrylblosser745 either will clear. Unless you have something that needs the height, the low is usually the better fit
@@area419 bummer..already ordered the standard.