CAR VERTICAL - Use code 'TRH' to save 10%: www.carvertica... Sorting a rusty VW Passat MY CONTACT INFO: Instagram: / trhamza_ Email: hamza_trh@hotmail.com
Part 4 should be good fun piecing everything back together! Also make sure you check out CAR VERTICAL and use my code ‘TRH’ to save 10%! www.carvertical.com/gb/landing/v3?b=1e4c9523&a=Hamza&voucher=trh
This R36 is looking better every time we see it. Well done, your under seal work looks really good. I’m looking forward to more restoration content on this car❤.
Awsome video man!! Just be sure to take some form of wax and spray it inside your panels. You can use Dinitrol ML it's the best,beacuse that rust made it's way from inside out. Now that outter side is protected inner side will start to rust unless it is protected. ML stays "oily" for a long time inside seals and between panels repels water,salt,dirt. Cheers man!!
Learning a lot with this R36 project - some shiny parts arrive next video! Also make sure to check out CAR VERTICAL using my code "TRH" to save yourself 10%! www.carvertical.com/gb/landing/v3?b=1e4c9523&a=Hamza&voucher=trh
most professionally looking unprofessional job i've ever seen. don't know if you're a mechanic, but whether you're or you're not, you've got some skill my guy 😂 love the content brother, keep it coming. i'm really hoping we can see an r30/r33 build down the line on this thing. the vr platform is so badly covered on youtube, almost no one is doing such style of video on it!
Bro, just found your channel. Thank you for these very well made videos. After watching the R36 stuff, I now want to go and binge watch all your old vids. Keep going with projects like this, I expect this channel to blow up! Excited for the next episode.
Looks good definitely a satisfying job to do, the only thing I’d suggest is getting some cavity wax in all those openings to stop the rust coming through from the inside
Certainly looks good. However, after a fair few decades of working on such things then I can gaurantee the rust will contine underneath that Raptor coating. This rust converters just don't penetrate all the way through the rust so although you may have an inert layer on top what lies underneath will still be good old rust. Best to use a rust/paint strip disc, as far quicker and better than a wire wheel, and then use a two part epoxy chassis/industrial paint before then top coating with the Raptor. It'll probably look good for a fair few years but it'll eventually bubble up under the Raptor.
Amazing work on the r36 It’s very satisfying seeing you take so much care and hard work to restore the old girl Will look superb:) looking forward to the next r36 episode Vdub:)
B6"s were plagued with surface corrosion especially the rear underside. Its wasn't for want of paint either. VAG caught on a few years after production, but tried to keep it quiet. It's a manufacturing fault call "zinc occlusions" it caused a reaction under the paint, once the surface broke then the rust set in. It was also evident on body panels and appeared like spider rust under the paint - and then soon breaking the surface. Dealers always fobbed it off as "mechanical damage" with very few rust problems being covered by warranty (anti-perforation and all that malarkey). What a load of balls🤷♂️.
Happy to see you go the extra bit and make everything look nice. I've used the full sized raptor kits and it's my favorite for bedliners or underbodies for sure. Looking good!
Great video brother, but you should have used engine degreaser, works a treat ❤ however it come out good regardless, why not get 2 cans made up of the original blue and do the wheel arches?
That looks great and thank you for being very descriptive about the process.. Love it
Год назад
it is pain, but this is not enough to stop rust, everywhere where is metal over metal spot welded, there will still be rust under it, and it will start rusting from that place and even faster when closed by paint, only way to fix permanently is to cut and weld new piece every piece that is rusted
This is my favorite VW content channel on the entire internet man u deserve wayyyyy more than 192k subs we need to get u to 1m bc ur content is excellent the camera work and the flow of the vids are great!!
Just for peace of mind you should check under the front fenders aswell for any rust spot. From my knowledge there should be 2 sponges which love to absorb water and then start to corrode the fender and the wheel arch.
Well done Hamza. Very impressive job on the underside of the R36. Well done on the top quality of the content and vids. I’m really enjoying all of the content. Regards from South Africa
Salt is terrible for cars, this is proof of that with the corrosion, even if it’s surface. Main reason I refuse to use a nice car during winter. Good work on the cleaning up.
Great works as always, it’s really good to see this step by step as it’s giving me inspiration to tackle my own car! Look forward to seeing the next instalment!
Bro don't give yourself all that grief next time with the drill and wire brush. Just use a angle grinder with a 60 grit sanding flap disc. You're going down to bare metal anyway so might as well. You might not get in everywhere though.
Well this vid triggered my PSTD. One winter I decided to renew all the rear bushes on my 1986 190E 2.3-16. A couple hundred quid's worth of arms and balljoints. Dropped the rear subframe off and then fell down the rabbit hole - diff rebuild, subframe refurb, new hubs/brakes/bearings/halfshafts/pipes/cables.... and totally stripped and resealed the floorpan from the arches backwards. Was under that damn thing for months and I stopped counting the cost at £4000 🤣
If you could get hold of some prepsol it would've helped quite a bit. eats through grime, oil everything except for paint. super satisfying to watch though.
Also that mask isn't going to be much use to extended exposure to the isocyantes within that bed liner. Get some ventilation or an air fed mask if you are working in confined spaces with it. Occupational asthma is no fun.
Hate to say it but that's going to come straight back. I've dealt with rust enough to times to know that you haven't taken it back enough and it will bubble back through. That needed blasting with garnet or at the very least treating with bilt hamber deox gel first.
I’m doing the same thing with my e46. So satisfying when you get that primer on! Bit late now but a wire knot wheel on a grinder makes super light work of the rust. Great vid!
W Polsce jakbys chlopie zrobil taka robote to kazdy by powiedzial ze spierdolona. Wydrapac drutami korozje i to jeszcze nie do konca i zapsiukac Raptorem :D A wszystko malowane z puchy :D
Part 4 should be good fun piecing everything back together! Also make sure you check out CAR VERTICAL and use my code ‘TRH’ to save 10%! www.carvertical.com/gb/landing/v3?b=1e4c9523&a=Hamza&voucher=trh
This R36 is looking better every time we see it.
Well done, your under seal work looks really good.
I’m looking forward to more restoration content on this car❤.
Thank you 😁
Well impressed with the work you're putting into this! Definitely preserved it for a long time to come.
Am I the only one who gets sad when de video is ending?🥲
Knowing that you’ll see the next one after 6 weeks?🙂🥲you’re not the only one my friends
@@lindokuhlejwente5225got it down to 2 weeks this time 😂👌🏼
Me to 😢
Rewind
Hamza you are a high quality worker you will make every car guy sleep good at night. Keep up the hard work .
Awsome video man!! Just be sure to take some form of wax and spray it inside your panels. You can use Dinitrol ML it's the best,beacuse that rust made it's way from inside out. Now that outter side is protected inner side will start to rust unless it is protected. ML stays "oily" for a long time inside seals and between panels repels water,salt,dirt.
Cheers man!!
Thanks man! Yes definitely will be applying some cavity wax
mate this is such a sick series, best ive watched on youtube in many years. Keep it up 💪
Thank you mate, appreciated 👌🏼
Enjoy all the other builds. But fast wagons just hit different. Really enjoying this series mate.
Smashed it Masha’Allah! 🙌🏼
Keep up the hard work my brotha! 👏
Thank you brother 🙏🏼
This is the best, been waiting so long for some one to work on this car.... can't wait to get mine out of retirement
Love the fact you went through the trouble to clean and remove all the rust. Kudos to such great work!
Learning a lot with this R36 project - some shiny parts arrive next video! Also make sure to check out CAR VERTICAL using my code "TRH" to save yourself 10%! www.carvertical.com/gb/landing/v3?b=1e4c9523&a=Hamza&voucher=trh
Anything will be appreciated
most professionally looking unprofessional job i've ever seen. don't know if you're a mechanic, but whether you're or you're not, you've got some skill my guy 😂
love the content brother, keep it coming. i'm really hoping we can see an r30/r33 build down the line on this thing. the vr platform is so badly covered on youtube, almost no one is doing such style of video on it!
Thank you brother 😂 Yeah id love to do a VRT build at some point, whether it’s on it this or something else
You done a good job on that DIY. Always better when u don't have to deal with no one but yourself it's all about the learning curve brother 👌🏽
Agreed, can’t beat learning in your own time 👌🏼
Bro, just found your channel. Thank you for these very well made videos. After watching the R36 stuff, I now want to go and binge watch all your old vids. Keep going with projects like this, I expect this channel to blow up! Excited for the next episode.
These uploads Hamza. Hands on & educational 🤌🏼😎
Thank you mate - learning a lot myself too making these so glad I can share it with others 👌🏼
Looks good definitely a satisfying job to do, the only thing I’d suggest is getting some cavity wax in all those openings to stop the rust coming through from the inside
Certainly looks good. However, after a fair few decades of working on such things then I can gaurantee the rust will contine underneath that Raptor coating. This rust converters just don't penetrate all the way through the rust so although you may have an inert layer on top what lies underneath will still be good old rust.
Best to use a rust/paint strip disc, as far quicker and better than a wire wheel, and then use a two part epoxy chassis/industrial paint before then top coating with the Raptor.
It'll probably look good for a fair few years but it'll eventually bubble up under the Raptor.
Amazing work on the r36
It’s very satisfying seeing you take so much care and hard work to restore the old girl
Will look superb:) looking forward to the next r36 episode Vdub:)
B6"s were plagued with surface corrosion especially the rear underside. Its wasn't for want of paint either. VAG caught on a few years after production, but tried to keep it quiet. It's a manufacturing fault call "zinc occlusions" it caused a reaction under the paint, once the surface broke then the rust set in. It was also evident on body panels and appeared like spider rust under the paint - and then soon breaking the surface. Dealers always fobbed it off as "mechanical damage" with very few rust problems being covered by warranty (anti-perforation and all that malarkey). What a load of balls🤷♂️.
Happy to see you go the extra bit and make everything look nice. I've used the full sized raptor kits and it's my favorite for bedliners or underbodies for sure. Looking good!
Loving the progress on the build
Great video brother, but you should have used engine degreaser, works a treat ❤ however it come out good regardless, why not get 2 cans made up of the original blue and do the wheel arches?
That looks great and thank you for being very descriptive about the process.. Love it
it is pain, but this is not enough to stop rust, everywhere where is metal over metal spot welded, there will still be rust under it, and it will start rusting from that place and even faster when closed by paint, only way to fix permanently is to cut and weld new piece every piece that is rusted
Great work on a tough job - super satisfying and that finish does look nice!
Great job under sealing looks good
You should of got a drill brush attachment to do the work for you with the water clean aswel pal
Nice 1 mate, love the projects you have on at the mo, just need more vids 😂
Cant wait for the next episodes, be interesting which way you'll go for the exhaust ;) Thats probably the hardest decision as a VR6 owner.
Man this passat look super fresh✔️✔️
Looks good mate. New subscriber from here in Australia.
Loving the progress! Great vid! 👍🏻
Nice job so far buddy. Really enjoying it. 😎👍
This is my favorite VW content channel on the entire internet man u deserve wayyyyy more than 192k subs we need to get u to 1m bc ur content is excellent the camera work and the flow of the vids are great!!
U seem to be enjoying yourself, great work bro
that looks nice. cant wait to see you drive it again
Absolutely beautiful job, matey. What's your plan when it's done? Keep it or sell it 😎🤙🏽
And I thought I had OCD 😂 this is definitely the sort of thing I’d do and then panic about putting it back right 🤣🤣
Mash'Allah bro you've come a long way. Keep up the great work 🙏🏼💯
Just for peace of mind you should check under the front fenders aswell for any rust spot. From my knowledge there should be 2 sponges which love to absorb water and then start to corrode the fender and the wheel arch.
Quality job Mate well done 👍
Well done Hamza. Very impressive job on the underside of the R36. Well done on the top quality of the content and vids. I’m really enjoying all of the content. Regards from South Africa
Salt is terrible for cars, this is proof of that with the corrosion, even if it’s surface. Main reason I refuse to use a nice car during winter. Good work on the cleaning up.
You should do more videos Hamza we love your content 😊
Not bad at all. Well done mate
what a car ! hug from brasil!
Great job always waiting for ur videos hamza
All the way from South Africa watch your video an I have my bell on
Legend thank you
Excellent job mate. Really enjoy seeing your projects coming on. Roll on 200k subs
Doing exactly the same thing to my blue mk5 R32
Great works as always, it’s really good to see this step by step as it’s giving me inspiration to tackle my own car! Look forward to seeing the next instalment!
Use an angle grinder for the rust removal. Lot quicker.
Loving the content bro, keep it going 💯
I had to laugh when you said that’s why these things take so long.
As you fly through your videos at full speed.
Thank you for saving this Legendary R36, brilliant work. I am looking forward to your future vids brother. Hello from Canada!
Cracking job fella 👍
Good work! Looking fresh. Little auction on it when it’s completed?
Awesome work man, looks epic well done!
Well worth the efforts looks fantastic
This is coming along really well bro, loving this series of the r36😀🙌🙌🔥🔥🔥
Lovely job, hope to see it stage 3 with 1000 hp one day it gone be the rarest car ever .. 💜
Glad I’m subscribed to someone who takes as much care underneath the car than what is visual to the eye everyday respect g👌🏻
Bro don't give yourself all that grief next time with the drill and wire brush. Just use a angle grinder with a 60 grit sanding flap disc. You're going down to bare metal anyway so might as well. You might not get in everywhere though.
Awesome job on this mate!! Love watching you show this R36 some well-needed/deserved TLC. Can't wait for the end result!
Excellent job well done
Absolutely loving the videos on this R36.
What a cracking job with the rust looks spot on!
For someone who's never done it that is a very tidy job Hamza, I plan to do this at some point too, good job!
Thank you!
these videos are great
Well this vid triggered my PSTD. One winter I decided to renew all the rear bushes on my 1986 190E 2.3-16. A couple hundred quid's worth of arms and balljoints. Dropped the rear subframe off and then fell down the rabbit hole - diff rebuild, subframe refurb, new hubs/brakes/bearings/halfshafts/pipes/cables.... and totally stripped and resealed the floorpan from the arches backwards. Was under that damn thing for months and I stopped counting the cost at £4000 🤣
looks awesome
Do you think a stage 2 is “safe” for a high miler like this? Great series
The R36 and VR6’s generally are pretty solid at high miles
I’ve got a b6 (2.0tdi thou 😢) think this is a common problem on the rear. My could do with being done. You’re done a cracking job there!!!!
You never miss Hamza💪
Thanks man! 👌🏼
Bilt Hamber Deox gel would help massively with some of this, along with Hydrate 80 and then electrox and their Epoxy mastic
340i next project ✈️✈️✈️✈️
If you could get hold of some prepsol it would've helped quite a bit. eats through grime, oil everything except for paint. super satisfying to watch though.
Dude please get a compressor and some spray guns/air tools.
A 60 grit on little DA would've been so much quicker than the drill.😊
Great work! Enjoying the series very much!
Looks fantastic mate, great job. I’ve got an r36 in Aus, very cool seeing what you’re doing
Also that mask isn't going to be much use to extended exposure to the isocyantes within that bed liner. Get some ventilation or an air fed mask if you are working in confined spaces with it. Occupational asthma is no fun.
Been watching from day one, always top tier content. Upload frequency is questionable.. lol
Hate to say it but that's going to come straight back. I've dealt with rust enough to times to know that you haven't taken it back enough and it will bubble back through. That needed blasting with garnet or at the very least treating with bilt hamber deox gel first.
I’m doing the same thing with my e46. So satisfying when you get that primer on! Bit late now but a wire knot wheel on a grinder makes super light work of the rust. Great vid!
Really enjoying your work Hamza, great to see you restore and upgrade perfectly good cars. Makes me want to keep and upgrade my S4 Avant 👍
TRH Zooooom
Keep going. It will be so good to see a restoration from beginning to end.
W Polsce jakbys chlopie zrobil taka robote to kazdy by powiedzial ze spierdolona. Wydrapac drutami korozje i to jeszcze nie do konca i zapsiukac Raptorem :D A wszystko malowane z puchy :D
I’m curious to know has anyone had it where it was prepped properly like this and had rust form underneath it?
using that raptor paint is a huge difference. but i would have opted for the non spraycan version....
Such good videos.
Great work 👏👏
Not relevant to this video but do you still have your classic Subaru Impreza ??
I'm thinking of landolyn coating the back axle on my 19 plate polo gti as its only done 9k when i recently got it
Hamza went from amateur to pro, reeeel quick. Respect brother 👌🏽
Vw has a 10yr rust warranty btw? Also if you are going to clean rust use a grinder with a wire wheel.
Get some bilt hamber surfex hd next time. It would do that clean in one pass and it has rust inhibitors
Next time you'd find it easier with an angle grinder much cleaner and easier to do than that drill.
hamza,quad turbo this thing and send it to mars my brudda trust miiiiiii
9:00 better to use angle grinder with wire wheels. MUCH faster and better results!