Now say you wanted to change your start point, to a specific point where your tool starts off of the job. How would you do that? I have been running a job at my work, it has a 1.5mm crown with a 55.624mm rad being cut in G19, But for some reason when I use surface parallel even giving it an extra 20mm total offset in the parameters the 12.7mm ball end mill starts on the part. Also I am coming from the bottom up, so it is wanting to bury into a massive amount of stock. I have tweeked the Program manually to give a few more cuts in the Y axis before it does so, but would be nice if I could figure out how to do it right in mastercam lol. Thank you for the video, and for any feedback given. I also can send pictures if needed!
I enjoy watching your tutorials.. I have a question, I programmed a part that has a large "chamfer" if you will, along a radius, I used finish flow line, and have checked all settings but the chamfer appears to do small linear cuts creating facets.. how would I correct this? Thanks in advance!
@@TomStikkelman 2018.. I did research, found the filtering area, but only got it to make smaller line segments, meaning more lines of code.. would be nice to just have it create an arc..
Question. How would you go from a block of steel to that finished shape with mastercam? I have the steel and the finished design but don't have the information in between
Thank you. This was easy to follow and to the point. As for the comments on your accent... The maturity of the commenters matched their icons.
Now say you wanted to change your start point, to a specific point where your tool starts off of the job. How would you do that?
I have been running a job at my work, it has a 1.5mm crown with a 55.624mm rad being cut in G19, But for some reason when I use surface parallel even giving it an extra 20mm total offset in the parameters the 12.7mm ball end mill starts on the part. Also I am coming from the bottom up, so it is wanting to bury into a massive amount of stock. I have tweeked the Program manually to give a few more cuts in the Y axis before it does so, but would be nice if I could figure out how to do it right in mastercam lol. Thank you for the video, and for any feedback given. I also can send pictures if needed!
you are a legend mate cleared some of the main errors I make
Can you change milling direction to rune tool pass in "Y direction and how do you do that
I enjoy watching your tutorials.. I have a question, I programmed a part that has a large "chamfer" if you will, along a radius, I used finish flow line, and have checked all settings but the chamfer appears to do small linear cuts creating facets.. how would I correct this? Thanks in advance!
2WN_2RBO
What version Mastercam are you using?
2WN_2RBO
What version Mastercam are you using?
@@TomStikkelman 2018.. I did research, found the filtering area, but only got it to make smaller line segments, meaning more lines of code.. would be nice to just have it create an arc..
How do you use subprograms with this pls?
Nice vid. Easy to understand. Ignore negative comments if they knew how to do this they would have made their own videos.
Maurice Richard
Thanks Maurice.
Question. How would you go from a block of steel to that finished shape with mastercam? I have the steel and the finished design but don't have the information in between
Email me your file and I can do a video on it
Ok! What's your email? Thanks
The Halls of Valhalla
tstikkelman@gmail.com
@@TomStikkelman what the barrel of the gun be made using a lathe
Hi I know that it won’t be same , but can a normal flat bottom end mill with say .5 mm corner radius be used, ?
mariano diaz Yes it can. The software will use whatever tool you pick
NICE VIDEO PUT SOME MORE VIDEOS ON SURFACE MACHINING
Now this is how you get the boys interested !!!
Thank you very much sir 🙏👍 😊
Great Vids....
How to change metric to inch
Sir please
2d and 3d tool path tutorial please...
I want to change your start point
Thanks nice vid.
thanks
Sir please 2d 3d tool path
good
now we click on survice..
Step files these days.