I think you're very funny as well and it has nothing to do with your accent!I love when you make the "ping" sound as you're making selections. Your enthusiasm is contagious!I've watched quite a few of your videos and have learned from every one. I use MasterCam for Solidworks and most of your videos cross over very well.Thanks!
you english is fine can understand everything and not being a professional trainer is good because you go into more depth on things that gave u issues or tricks you have learned, i appreciate any in depth tutorials on mastercam software I have pretty good understanding of x1-x8 but has been a little while trying to get back into it. thank you for your posts
No problem..If I have any questions as I get moe into this I was pretty solid at up to 2.5 d and some 3d but I never became an expert and has been a little while. the problem i have is ai ma all self taught and when I have a question or something is impeding my progress i have noone to ask for help so I get stuck and Im sure there simple questions for experienced programmers. i am a full all around machinist cnc and manual but it boars me a little I like doing it all and programming can get very complicated depending on the complexity of the blueprint and the depth you have to go into the software to be able to program the part so it will work as efficiently as possible...I would appreciate if I could ask you some questions that come up as I get back into this. thank you for your videos they are truly great..
I like your video a lot. Watching your learning video, I can learn a lot from you. Thank you for making this video sharing your knowledge and experience. I have watched a couple of your video and it is getting better and better. Again i like your presentation in this video.
Very good job! Absolutely love the video. I'm a 25 year mastercam user and even I learned things from this video. Great job! Also your English is great too
Great video! very informative! 2 questions how would you include a boundary wall on the positive most Y side of the part? and what stepover % would you use for steel? thank you
Hi Dustin, sorry i don't understand the first question. Which steel are you machining, you can run around 5-15% for steel depend on the tool and material, also depth of cut.
GIANG THE TOOL hard to explain but if there was a long .5" tall wall that you want to keep that ran in the x direction at the positive Y end. thanks for reply
Chào bạn. Cảm ơn bạn đã góp ý. Nhưng hiện tại làm sub mất rất nhiều thời gian nên mình không làm được. Mình chỉ có thể hỗ trợ bằng cách dạy online thôi
Dung la nghe hoi la so voi My, nhung nhu vay minh nghi da tot hon nhieu nguoi, tham chi dan nuoc ngoai. y nghia cua video nay k phai day tieng anh, ma share kien thuc ve Mastercam. anyway, thk alot
I think you're very funny as well and it has nothing to do with your accent!I love when you make the "ping" sound as you're making selections. Your enthusiasm is contagious!I've watched quite a few of your videos and have learned from every one. I use MasterCam for Solidworks and most of your videos cross over very well.Thanks!
you english is fine can understand everything and not being a professional trainer is good because you go into more depth on things that gave u issues or tricks you have learned, i appreciate any in depth tutorials on mastercam software I have pretty good understanding of x1-x8 but has been a little while trying to get back into it. thank you for your posts
Thank you Mike ...cheer!
No problem..If I have any questions as I get moe into this I was pretty solid at up to 2.5 d and some 3d but I never became an expert and has been a little while. the problem i have is ai ma all self taught and when I have a question or something is impeding my progress i have noone to ask for help so I get stuck and Im sure there simple questions for experienced programmers. i am a full all around machinist cnc and manual but it boars me a little I like doing it all and programming can get very complicated depending on the complexity of the blueprint and the depth you have to go into the software to be able to program the part so it will work as efficiently as possible...I would appreciate if I could ask you some questions that come up as I get back into this. thank you for your videos they are truly great..
I like your video a lot. Watching your learning video, I can learn a lot from you. Thank you for making this video sharing your knowledge and experience. I have watched a couple of your video and it is getting better and better. Again i like your presentation in this video.
why do you laugh mate, because of my weird accent? :))
when did he say he laughed?
Very good job! Absolutely love the video. I'm a 25 year mastercam user and even I learned things from this video. Great job! Also your English is great too
Thank you Matthews
Việt Nam rất cần những video bổ ích này mong bạn giúp đở người Việt chúng ta cùng phát triển đi !!
Great video. I also like a lot of your other videos. They are so helpful! Please keep posting new videos on how to use Mastercam!
Thnks for share you knowledge........help me a lot.
Bạn có thể giúp cơ khí ViệtNam phát triển thêm một chút nếu có ngôn ngữ Việt. Tôi thích video này
Your name should be Giang the Man...Thank you for all your tutorials.
Thank you. You are good.
Great video! very informative! 2 questions how would you include a boundary wall on the positive most Y side of the part? and what stepover % would you use for steel? thank you
Hi Dustin, sorry i don't understand the first question.
Which steel are you machining, you can run around 5-15% for steel depend on the tool and material, also depth of cut.
GIANG THE TOOL hard to explain but if there was a long .5" tall wall that you want to keep that ran in the x direction at the positive Y end. thanks for reply
If you can provide me a picture or hand sketch, I think I can help, my English is not good :D
I'll see if I can make a rough model. I'm away from the computer at the moment
imgur.com/a/loO0E
Hello anh, anh có thể làm video cho feed and speed for HSM ko?
bạn có thể cho mình hỏi :mình mới học mastercam nên thấy lẫn lộn giữa phay 2d và 3d có phải phay hay 3d dều được bạn giống nhau không bạn ?
mình chưa hiểu ý bạn lắm, hai cái khác nhau bạn nhé
how to delet boundary if you have did wrong something or you want to modify?
Great video! Thank you
bạn có thể nói cho mình bết khi nào dùng 2D hay 3D ko vậy?
Last vedio right angle head how to use. I'm very useful thank you
Thanks!
a hướng dẫn rất cụ thể và chi tiết còn hơn trường lớp và 1 số trung tâm..nhưng tiếc là tiếng anh
Thank you so much very helpful
doing great job dear
Thank you Lalji
great tutorial thanks!,
So need CNC double coloumn 5 face auto rotate tool paths
GOOD JOB THANKS
can u please provide the dimensions of part or part file itself.. Thanks... great job ☺
I just included it in the video description, thank you!
can you upload a CAD part?
phay contual hay poket điều như nhau bạn
Why autocad solid import to mastercam is not solid.
Thank u..
Làm sao liên lạc Giang
Nice
A giang có vietsub k. :(
anh Giang có thể sub tiếng việt được ko ạ
cho ae quê nhà học hỏi với
chứ bọn e đi mua tài liệu mà toàn vớ vẩn ko học được
Chào bạn. Cảm ơn bạn đã góp ý. Nhưng hiện tại làm sub mất rất nhiều thời gian nên mình không làm được. Mình chỉ có thể hỗ trợ bằng cách dạy online thôi
GIANG THE TOOL những video trước a làm đó ạ
e có xem những clip tiếng việt của a thấy rất bổ ích
mong a làm thêm những clip như vậy ạ
mình muốn học online có đc không bạn??????/
Hi Giang, Could you please show me how to do the toolpaths for the part i have. I already send to your email. thank you
Tiếng việt ko nói đi ban
well done,,,,e
i want you peak VietNam :)))
Hi
khó nghe vl , tiếng anh quả là vkl
speaks a lot and moves a lot and explains a little
xin cái file thực hành đi a ơi , minhvu@gmail.com
cheers 6 UTF d u XT l
tieng anh nhu ga ma con bay dat.
Cảm ơn bạn đã góp ý :D
Dung la nghe hoi la so voi My, nhung nhu vay minh nghi da tot hon nhieu nguoi, tham chi dan nuoc ngoai. y nghia cua video nay k phai day tieng anh, ma share kien thuc ve Mastercam. anyway, thk alot
You have a poor soul my friend. We don't need such comments like yours on this positive learning forum.
Lỗ Chí Thâm nguoi ta bo cong ra de lam video cho ban xem ma ban con che la sao vay dai ca?