3:02 Ah yes the problem that troubles all who restore old cars.. of having no bling. Once again Kris, your work is excellent and not only on the bus. The video quality, the seamless editing, the humor just a joy to watch. Always a pleasure to watch. Thanks to you and Mallory for making it happen.
Awesome job! I have one to do on my 80 westi, love how yours turned out! But what i like most is how your self taught and now your the teacher! Ive done some fab work in mine, front inner and outer windshield channel, and like you im self taught and learned as i went along. doing the corners were the toughest part but also the most rewarding. Thanks for your inspiration as well as your skills and approach to doing the job at hand! Charlie, 43 yr westi owner, and 72 Beatle owner, (not bought new)
you make pretty good content, i also think to start publishing my works in the near future. So far i have worked with old mercedes and opels, future goal is owning and restaurating also some vw van. I wanted to suggest you, when you get too much gap between the panels, try next time use a caper material such as caper tube. let the parrtner press from the other side of the panel to the place where you weld, or fix it on the place, it will help to weld the panels together, belive me. You can combine it with the metod you showed- using wire.
PS: Not sure where the drilled holes along the inner lip of the new panel are spot-welded to? At the end of the video I didn’t see you weld under the new lip.
Tyler has a beautiful bus
The bus also has a beautiful Tyler.🤨
I have to do this on my ‘71. Thanks for all you do! I now have a bit less fear. Dude, if you can make klokkerwhiz look that good you’re doing well!
Cardboard Aided Design …skill level 100!
3:02 Ah yes the problem that troubles all who restore old cars.. of having no bling. Once again Kris, your work is excellent and not only on the bus. The video quality, the seamless editing, the humor just a joy to watch. Always a pleasure to watch. Thanks to you and Mallory for making it happen.
HI KRIS, GREAT VIDEO, LOVE N PEACE FROM SCOTLAND
Excellent work. Always good to have buddies to help out with the project.
G'day,
Give the obstacles you had to overcome along the way I think you did an awesome job. This should paint up nicely.
Peace ✌️
im really glad that youre here learning and doing stuff for us to see because i know that it'll be useful for when i get my own bus and work on it.
Very well
Done. Your a highly experienced VW bus rebuilder now
Awesome job! I have one to do on my 80 westi, love how yours turned out! But what i like most is how your self taught and now your the teacher! Ive done some fab work in mine, front inner and outer windshield channel, and like you im self taught and learned as i went along. doing the corners were the toughest part but also the most rewarding. Thanks for your inspiration as well as your skills and approach to doing the job at hand! Charlie, 43 yr westi owner, and 72 Beatle owner, (not bought new)
Great coat hangar tip !
You do great work
Very nice job ! Looks amazing !
Great vid, again boys!!
Watched all the videos you have you’ve been a great help in helping me figure out what my bus will need
Hello, I have the same T2, with the same rust problem. Your videos are top. 👍👍👍Greetings from Germany.
Great video
Love your work. 🤙
awesome, txs for sharing...
wonderful!
Sharing your skills ❤
I try
you make pretty good content, i also think to start publishing my works in the near future. So far i have worked with old mercedes and opels, future goal is owning and restaurating also some vw van. I wanted to suggest you, when you get too much gap between the panels, try next time use a caper material such as caper tube. let the parrtner press from the other side of the panel to the place where you weld, or fix it on the place, it will help to weld the panels together, belive me. You can combine it with the metod you showed- using wire.
good video
I'm doing the same repair and I'm considering using some thick butyl sealant tape to replace the original foam in the channel
I need your videos!!
Parabéns
Nice 🤙🤙🤙🤙🤙
Thank you! Cheers!
You're getting really proficient at this! You ever think about opening a shop?
Whooo hooo 😎 you could have done the "cut and butt" across the top you know :p
👍👍👍
PS: Not sure where the drilled holes along the inner lip of the new panel are spot-welded to? At the end of the video I didn’t see you weld under the new lip.
Whole panel up to down renew , now you have a lot of sanding work .
That’s the fanciest welding stool I’ve ever seen. Wonder what Charles Eames would make of that? 😂🤣😂☘️
Was Tyler not bothered about stripping the shipping primer on the inside of the panel and coating with epoxy primer instead? Great video as usual!
How's York bus coming on kris? Not seen any more post's
Hey mate
Can you pls send me a pic of the welder you use for the panel work
And do you use gas?
Watch fritzee fabrication…. Show you a lot of great tips for rust repair
Like the Cut And Butt 😁
All about that tool flex. Too bad most of my specialty bus restoring tools are chinesium specials .😅😅
🤗👍👌💯
Kris how van is see your patron videos
Butter finger ppl