OMG those eyes 😱Oh I LOOOVE all of your videos, they are so inspiring, and listening to your voice just makes me happy, you have such a "smiling" voice, one can only smile back while watching your content, so thank you so much ❤🥰
You should be able to use a little bit of vegetable oil spread over the resin object before you push it into the clay. This will help release the object and it will just “ cook off “ when you dry the clay out. The one problem you can get using cling wrap is it can get crinkled and ruin your image but you won’t get that with oil.
Thanks for all the great tutorials! Other options to avoid the clay sticking… Dust the piece with corn starch (corn flour in the UK). Once you bake the clay, you can just wash off any powder residue if there is any. You can also spray water on the piece, and clay will not stick. Just be sure it is dry before baking! I don’t know what the equivalent is in the UK, but in the US, some people use regular Armor All as a release. It’s to clean car dashboards/doors/etc. Kinda a creamy liquid.
Hello! I’m new to your channel and was instantly so happy to see that you were concerned about copyright. Too many people demonstrate ideas but infringe on a designer’s intellectual property/copyright. Plus I loved the tutorial which is what I was searching for. Informative, a very pleasant voice over and so helpful! You have a new subscriber!
Heyyyyyy Kelly .. thank you so much x that means a lot xx I definitely never want to upset anyone On this journey .. if I fall in love with an idea and wNt to try it then i always make sure they are tagged and I shout them out,too x I usually drop them a message also 😍😍😍
@@ClairesCraftyCorner Its so refreshing to see such honesty and simple decency from a resin artist/crafter/you tuber! I started designing cross stitch a few years ago after people liked what I had designed for myself. Firstly I only sold to friends. Then, lo and behold, one of my designs was on eBay, being sold in multiples as a paper copy, no doubt just photocopied, for more than I was asking. I printed each one on quality paper from my design software and labelled each one with a copyright notice, restrictions (and the name of the buyer if it went as a pdf as cross stitch pdfs cannot be re-sold.) They had none of this I’m sure. They had sold more of that one design than I had in total! I never found out who it was, but oddly enough one person disappeared from my life after I posted about it in the cross stitch group I was in. I still design for gifts, but just cannot face the heartbreak of trying to sell. But I’m now on my resin journey! Shop will be opened soon I hope! Looking forward to watching more of your videos. Have a great day!
I was just trying to figure this out in my head after looking at the price of some inlay shell molds I wanted but were a little pricey and I only liked 2 of the 4. Thank you so much for sharing!
LOVE LOVE LOVE this idea! Thank you so much for sharing it with us! I'd like to share a few ideas with you that helped me in the past when I tinkered with poly clay... #1...Instead of squishing the polymer clay ball directly on your tabletop, use a 4"x4" glossy wall tile as your work surface. Clean it, squish your ball, emboss it, cut final outter edge with (oiled) cookie cutter and put tile WITH clay still on it in oven to bake! This avoids warping your raw clay design you just made bc you don't have to peel it off of the worktop 😉 #2...Dab the tiniest bit of olive oil (or similar) onto your finger and run your finger along the inner edge of your cookie cutter, it will just slide RIGHT OFF of the clay shape you're cutting. ESPECIALLY if your raw clay is already stuck to the tile! Really hope this helps. I ABSOLUTELY LOVE your videos... you ALWAYS brighten my day with your energy and cheerful voice!
Hi Claire, I love your videos and I am watching from my couch in Tustin, CA in the US of A. I found your channel while watching one of Wendy’s video, you guys are my go to people for creative, enthusiasm, original ideas and just great stuff. I look forward to watching what you come up with and then doing my thing. Keep up the the great work, l really do love what you do. Paula P. ❤🎉😅
That is an awesome idea to create an inlay. I do a lot of resin shadowboxes and crab shells are not always easy for me to come by. I will get that a try 🖤🤍🖤🤍💜
You are so sweet, so glad you showed all the mishaps so your followers will make it perfectly. Now, what do I want to try to make a silicone inlay of? Hmmmm. I have so many items laying around the shop.
❤️ Great job Claire. If you'd painted the dried clay with a shiny paint or varnish, those inlays would have come out with a shinier surface. Looking forward to seeing what you do with them.
Let'sResin silicone is VERY picky about what can be used with mold making. It doesn't like clays or uv resin (UNLESS you let it sit for a week or two) it doesn't like Hot Glue either. I've had quite a few molds that would not cure because of incompatible materials. When it works, it works beautifully.
Ahhhhh this will probably be what happened on my first attempt.. but I think I poured too early still ... its good to know it has its areas of downfall.
Can’t wait to see what you do with these!!! I love how easy it can be to create silicone inlays and moulds! Thanks for all the trying so we don’t have to!! 💚x
I really 💜💜💜 this idea to make my own inlays! I had tried using clear stamps (like rubber stamps, but clear - used for card-making) as inlays and although it worked, it wasn't ideal. Even with using Release spray on them, they were still very difficult to remove from the set resin. I'm still a little apprehensive about making my own silicone molds/inlays, but I'm getting closer to just giving it a shot and see what happens. I do use Air Dry clay to make other things and don't like Polymer clay... but I haven't seen anyone actually USE air dry clay to make these inlays... and not sure which air dry clay to use.
I just found your Channel. I’m so happy I did, I have been wanting to know how to make these. I’m about to look though your videos hoping that you made a video on how you made your silicon mold out of the air dry clay.I’ve just ordered liquid silicone to try to make my own molds the other day it supposed to be here tomorrow. Thank you so much for sharing!!!!💕💕💕
Love love love this. I’ve been looking at my stash of jewelry and wondering if there is a way to replicate them. Can’t wait to try it. Thank you for sharing!
💛 I heard pouring your heart out mention where she got the idea of silicone inlays and how to do them from your videos and heard her say your channel a couple other times and so I came to check you out and I am so glad I did!!
💖 Fab video Claire 😊 I love how you always tell us about your mistakes as well as your triumphs...it inspires us to carry on when we make mistakes 😍 Xx
I was wrong about the resin. Know nothing about silicone rubber, thought you were talking about resin. I am correct about Sculpey III, i have been working with polymer more than 25 years. Yes it is best to bake polymer clay longer for strength, i bake it at least an hour, i always tent it I used your link and bought the larger kit. Those molds are very beautiful and tempting
Wow wow wow, I have clay plus and this is huge!!! I went on your Amazon link and got myself some totally and utterly lush shells. So I hope that YOU get a percentage of the monies, they should because without your wonderful input I would not have got them. I am going to go buy some more, oh now I need some of that silicone liquid stuff. Then I will be having crafting fun. Thanks a zillion billion times over Claire... SO SORRY, I am waffling on. 💜 (love purple).
Heyyyy Pammi ... youre not waffling at all ❤️❤️ lol I appreciate you saying all of it xx and yes my Amazon Storefront is an affiliate so I get commission on sales 😍😍😍
@@pammipayne3334 oh Pammi thankyoooo ❤️❤️❤️ it all really helps me .. I also get commission on any sales made through the link so .. if you click the link to buy a silicone mould and decide you want a new rug ... 🤣🤣🤣 I get commission on that too if you have gone in through my link ... if that makes sense it's a very cool tool to have (not saying you need to do this by the way) 🤣🤣🤣 it's just a cool little fact that I only recently learned
💙💚💛💜♥️🖤. I like using Let's Resin to make my molds. I haven't made any inlays yet, so thank you so much for this video. I will definitely give it a try!
These are so awesome, would love to give this a try and see what I can make an inlay out of! Thank you as always Claire, you definitely have sparked my imagination 😁 xx
I’m so excited to try this! So excited!!!!! I was just looking at the let’s resin silicone! Do you know if the silicone will work with the putty mold stuff? Or is clay just better?
Hi, Claire. What a brilliant idea! I can't wait to try this one. I used your USA Let's resin link and tried the code on several items, but couldn't get it to work. Any ideas? I was just thinking that I can't wait until the next holiday, which is when you really SHINE. So what is the next holiday? July 4th, Independence Day. But I'm guessing you guys aren't into that one very much. Do I actually have to wait until Halloween, or is there anything before then? Great to see you. Take care.
Heyyyyy Miley ... ohhh its not working ? I will get them to check it for me ... I know you gave to cluck the affiliate link before using the code ... so I will look again at my description box to make sure its written correctly .. 4th of July is not a holiday for us so my next holiday will be Halloween although .. there is a Christmas in July collaboration coming up 😍😍😍😍😍
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
💙 Always love to see the ammonites 😍 Do you know why mermaids wear sea shells? Because B shells are too small and D shells are too big 🤣🐚🐚
😂😂😂
@resinAce I really miss seeing your videos and all of your jokes and puns! Why no more videos??
🤣🤣🤣🤣 hilarious !!
Your Ammonite moulds are totally my best friends right now 😍❤️🙌🙌
I love a good "dad joke"! LOL!!!
❤️💗💛🧡💚💙💜🤎🤍🖤
OMG those eyes 😱Oh I LOOOVE all of your videos, they are so inspiring, and listening to your voice just makes me happy, you have such a "smiling" voice, one can only smile back while watching your content, so thank you so much ❤🥰
💕🤍💕I was still here all the way through and loved it I could watch you make these all day long ❤️❤️🥰🥰
😘😘😘😘😘😘 thank yooooooo babe
I love listening to you, when you speak it sounds like your smiling.. ❤
You should be able to use a little bit of vegetable oil spread over the resin object before you push it into the clay. This will help release the object and it will just “ cook off “ when you dry the clay out. The one problem you can get using cling wrap is it can get crinkled and ruin your image but you won’t get that with oil.
💚 thank you for sharing your misfortune and your good finished product. It was nice to hear what did and didn't work.
Thanks! This is the best inlay video on RUclips!
Wow ... thankyou so so much Susan ❤️❤️ I really appreciate your support xx
Thanks for all the great tutorials!
Other options to avoid the clay sticking…
Dust the piece with corn starch (corn flour in the UK). Once you bake the clay, you can just wash off any powder residue if there is any.
You can also spray water on the piece, and clay will not stick. Just be sure it is dry before baking!
I don’t know what the equivalent is in the UK, but in the US, some people use regular Armor All as a release. It’s to clean car dashboards/doors/etc. Kinda a creamy liquid.
Hello! I’m new to your channel and was instantly so happy to see that you were concerned about copyright. Too many people demonstrate ideas but infringe on a designer’s intellectual property/copyright. Plus I loved the tutorial which is what I was searching for. Informative, a very pleasant voice over and so helpful! You have a new subscriber!
Heyyyyyy Kelly .. thank you so much x that means a lot xx I definitely never want to upset anyone On this journey .. if I fall in love with an idea and wNt to try it then i always make sure they are tagged and I shout them out,too x I usually drop them a message also 😍😍😍
@@ClairesCraftyCorner Its so refreshing to see such honesty and simple decency from a resin artist/crafter/you tuber!
I started designing cross stitch a few years ago after people liked what I had designed for myself. Firstly I only sold to friends. Then, lo and behold, one of my designs was on eBay, being sold in multiples as a paper copy, no doubt just photocopied, for more than I was asking. I printed each one on quality paper from my design software and labelled each one with a copyright notice, restrictions (and the name of the buyer if it went as a pdf as cross stitch pdfs cannot be re-sold.) They had none of this I’m sure. They had sold more of that one design than I had in total! I never found out who it was, but oddly enough one person disappeared from my life after I posted about it in the cross stitch group I was in. I still design for gifts, but just cannot face the heartbreak of trying to sell. But I’m now on my resin journey! Shop will be opened soon I hope!
Looking forward to watching more of your videos. Have a great day!
I was just trying to figure this out in my head after looking at the price of some inlay shell molds I wanted but were a little pricey and I only liked 2 of the 4. Thank you so much for sharing!
LOVE LOVE LOVE this idea! Thank you so much for sharing it with us! I'd like to share a few ideas with you that helped me in the past when I tinkered with poly clay...
#1...Instead of squishing the polymer clay ball directly on your tabletop, use a 4"x4" glossy wall tile as your work surface. Clean it, squish your ball, emboss it, cut final outter edge with (oiled) cookie cutter and put tile WITH clay still on it in oven to bake! This avoids warping your raw clay design you just made bc you don't have to peel it off of the worktop 😉
#2...Dab the tiniest bit of olive oil (or similar) onto your finger and run your finger along the inner edge of your cookie cutter, it will just slide RIGHT OFF of the clay shape you're cutting. ESPECIALLY if your raw clay is already stuck to the tile!
Really hope this helps. I ABSOLUTELY LOVE your videos... you ALWAYS brighten my day with your energy and cheerful voice!
Hi Claire,
I love your videos and I am watching from my couch in Tustin, CA in the US of A. I found your channel while watching one of Wendy’s video, you guys are my go to people for creative, enthusiasm, original ideas and just great stuff. I look forward to watching what you come up with and then doing my thing. Keep up the the great work, l really do love what you do. Paula P. ❤🎉😅
Awesome Tutorial it helped me immensely, if I decide to make any I've marked and kept this video to watch ❤❤❤😊😊
💜 Thank you for the video and the tips 🙏 I could refeel your frustration when it was not working ☺ Have a wonderful day 🙋🏼♀️🤩
Thank yooo x it certainly was lol x
Love this idea! Thanks for sharing!! Happy Creating!!!!!!💖
Absolutely love the seaside theme to this x Beautiful
Thank you for making things easier
That is an awesome idea to create an inlay. I do a lot of resin shadowboxes and crab shells are not always easy for me to come by. I will get that a try 🖤🤍🖤🤍💜
Great video Claire. Love the result
Love your enthusiasm as always Claire 😊
You are so sweet, so glad you showed all the mishaps so your followers will make it perfectly. Now, what do I want to try to make a silicone inlay of? Hmmmm. I have so many items laying around the shop.
❤. I’ve made several druzy inlays but using other items never crossed my mind 😮! Thanks for sharing!
Thankyooo Pam .. yes that is the beauty of this .. you can put whatever you want in the clay 😍😍
❤️ Great job Claire. If you'd painted the dried clay with a shiny paint or varnish, those inlays would have come out with a shinier surface. Looking forward to seeing what you do with them.
Thankyoooo Yvonne .. yes I was thinking of it .. but also I knew I would mostly be using Chameleon powder on them so wouldn't need them shiny 😍😍😍
@@ClairesCraftyCorner good point, never thought about that!
Just found you from a mention in pouring your heart out❤️ loved it! Can’t wait to watch more, love your energy!
Let'sResin silicone is VERY picky about what can be used with mold making. It doesn't like clays or uv resin (UNLESS you let it sit for a week or two) it doesn't like Hot Glue either. I've had quite a few molds that would not cure because of incompatible materials. When it works, it works beautifully.
Ahhhhh this will probably be what happened on my first attempt.. but I think I poured too early still ... its good to know it has its areas of downfall.
❤ So helpful. Cant wait to start. Thanks Claire ❤
Can’t wait to see what you do with these!!! I love how easy it can be to create silicone inlays and moulds! Thanks for all the trying so we don’t have to!! 💚x
I really 💜💜💜 this idea to make my own inlays! I had tried using clear stamps (like rubber stamps, but clear - used for card-making) as inlays and although it worked, it wasn't ideal. Even with using Release spray on them, they were still very difficult to remove from the set resin. I'm still a little apprehensive about making my own silicone molds/inlays, but I'm getting closer to just giving it a shot and see what happens. I do use Air Dry clay to make other things and don't like Polymer clay... but I haven't seen anyone actually USE air dry clay to make these inlays... and not sure which air dry clay to use.
💕💕💕 Thanks for your tips. I have some tiny terracotta molds I have had for years I might try using them. 💖
I just found your Channel. I’m so happy I did, I have been wanting to know how to make these. I’m about to look though your videos hoping that you made a video on how you made your silicon mold out of the air dry clay.I’ve just ordered liquid silicone to try to make my own molds the other day it supposed to be here tomorrow. Thank you so much for sharing!!!!💕💕💕
great video Claire. Silicone is so much fun when it goes right lol. love them . Brilliant 🥰
Love love love this. I’ve been looking at my stash of jewelry and wondering if there is a way to replicate them. Can’t wait to try it. Thank you for sharing!
💛 I heard pouring your heart out mention where she got the idea of silicone inlays and how to do them from your videos and heard her say your channel a couple other times and so I came to check you out and I am so glad I did!!
Heyyyyyy Heather ... wow thank you xx That is so cool for her to shout me out ❤️❤️❤️
💖 Wonderful tutorial, thank you for sharing.
💖 Fab video Claire 😊 I love how you always tell us about your mistakes as well as your triumphs...it inspires us to carry on when we make mistakes 😍 Xx
I'm there till the end of every one of your videos 💙💜❤️
Thank yooooo so much ❤️❤️❤️
💜 So glad I found this tutorial! I have been wondering how to make an inlay. Thank you!
Thanks Claire 💙
I was wrong about the resin. Know nothing about silicone rubber, thought you were talking about resin. I am correct about Sculpey III, i have been working with polymer more than 25 years. Yes it is best to bake polymer clay longer for strength, i bake it at least an hour, i always tent it I used your link and bought the larger kit. Those molds are very beautiful and tempting
Wow wow wow, I have clay plus and this is huge!!! I went on your Amazon link and got myself some totally and utterly lush shells. So I hope that YOU get a percentage of the monies, they should because without your wonderful input I would not have got them. I am going to go buy some more, oh now I need some of that silicone liquid stuff. Then I will be having crafting fun. Thanks a zillion billion times over Claire... SO SORRY, I am waffling on. 💜 (love purple).
Heyyyy Pammi ... youre not waffling at all ❤️❤️ lol I appreciate you saying all of it xx and yes my Amazon Storefront is an affiliate so I get commission on sales 😍😍😍
@@ClairesCraftyCorner You are so kind. Oh that is so great. In that case I will be buying more things. ❤️❤️ 😍 Have a great day talented lady xxx
@@pammipayne3334 oh Pammi thankyoooo ❤️❤️❤️ it all really helps me .. I also get commission on any sales made through the link so .. if you click the link to buy a silicone mould and decide you want a new rug ... 🤣🤣🤣 I get commission on that too if you have gone in through my link ... if that makes sense it's a very cool tool to have (not saying you need to do this by the way) 🤣🤣🤣 it's just a cool little fact that I only recently learned
@@ClairesCraftyCorner Well I didn't know that. That is great news. Anything to help out. Resin is not cheap, so yeah all for it. xxx ❤️
@@pammipayne3334 ahhh yeh its all so helpful ❤️❤️❤️
Love it Claire! ❤💕
great to watch 💜
Thank you so much for this tutorial!!!🩷
💓💓💓 Love it glad you kept pushing!
Thank you so much ❤️❤️❤️
💙💚💛💜♥️🖤. I like using Let's Resin to make my molds. I haven't made any inlays yet, so thank you so much for this video. I will definitely give it a try!
So much information and inspiration that my head is buzzing with it! 💙
So happy to hear that Mizz xxx Enjoy ❤️❤️❤️
Awesome!! Thank you for this amazing tutorial!!!
Thankyooo Julie .. so glad you enjoyed it xx
Thanks Claire for ALL you do for us!! This was terrific!!!💕💕🧜♀️
Thankyooooo Kathy ❤️❤️❤️❤️
Those turned out so very nice.
💜
Thankyoooo Sheri ❤️❤️❤️
You've inspired me to go ahead with making molds! Thank you ❤️ 💙 💜 💖 💗 💘
💜💚💙 Brilliant. Just looking around now for something to cast for a silicone mould 😁
❤ love you videos Claire
Yet another great video Claire 💗
Such a fabulous idea. They are brilliant 🤩
Thank yooooo my lovely 😍😍😍😍
💙💙💙💙💙💙 love this!! Well done, Claire!
Thankyoooo Nancy ❤️❤️❤️
❤️ brilliant as always
Thankyoooo Alison ❤️❤️❤️
These are so awesome, would love to give this a try and see what I can make an inlay out of! Thank you as always Claire, you definitely have sparked my imagination 😁 xx
This video is just what I needed!! ❤
Yayyyyy ❤️❤️❤️
💙. Fabulous! Can’t wait to see what you create with them.
Thankyooooo Robin 😍😍😍
Gorgeous and I love your presence. Found myself happy with you 😂❤
Heyyyyy Portia .. that really does mean everything to me xxx thankyooooo ❤️❤️❤️❤️❤️
Can’t wait to try this! Thanks Claire!
Ooh they are great Claire. Given me some ideas. Thanks 😊 x
Thank yoooo Jane xxx
💜 great information. Thanks
You can also use cornstarch to prevent the thing form sticking to the clay
Ohhhh thankyou so much ❤️❤️
Fantastic!
💖 Thank you, I really wanted to know how to do that.
Purple 💜
💙🙋🏻♂️ Great idea Claire! 👏👏👏👍
Thank yoooo Gabrielle ❤️
💜💜💜Beautiful!💜💜💜
Yet again brilliant video, love your videos💕
Thank you so much ❤️ really glad you do xx
They look awesome Claire. Thanks for sharing. 💜💜
Thankyoooo Patricia ❤️❤️❤️
Great job 💞
Which quick set resin do you use please hun? These are awesome and I didn't realise Resin Ace sold molds too.
Another beautiful project hun 💜
Heyyyyyy lovely ... I used the Polycraft Black ... got it from I love mixed media. Its the MBFibreglass one
@@ClairesCraftyCorner awesome thanks hun
Thank you hon. Gave me ideas! Crafts are so fun. ❤️ 💙 💜
That's great thankyooooo Cara ❤️❤️
💜 thank you so much xx
Very cool ❤
Love this 😍
Super cute 🥰💙
Thank yoooo ❤️❤️❤️
I have to try this!! Thank you
💚, nice work! thank you
❤ Great video. Thanks.
🦋I like butterflies more than hearts
Ahhhhh lovely 😍😍😍
Can’t wait to try!! 💜
That you so much for sharing.
Thank you! Thank you! Thank you! Thank you! 😊
omg this is awesome now you have me wanting to run and get some clay
So glad you like them Kathy 😍😍😍
Claire, how would you make a coaster mould with a live druzy edge (as used in the resin Larimar effect). Thanks❤
Brilliant thank you ❤
Amazing video Thank you for sharing 😊
Thankyou so much ❤️❤️❤️
Pink heart💕
Great video thanks. I have the same ammonite mould so I'm going to try it.💛
Thankyoooo Nelly ❤️ oh amazing
❤ Thank you. 😊
❤ love these
Thankyooooo ❤️❤️❤️
💞 Thanks for this tutorial Claire.
It is so pitty that I can not buy the molds
I’m so excited to try this! So excited!!!!! I was just looking at the let’s resin silicone! Do you know if the silicone will work with the putty mold stuff? Or is clay just better?
Hi, Claire. What a brilliant idea! I can't wait to try this one. I used your USA Let's resin link and tried the code on several items, but couldn't get it to work. Any ideas?
I was just thinking that I can't wait until the next holiday, which is when you really SHINE. So what is the next holiday? July 4th, Independence Day. But I'm guessing you guys aren't into that one very much. Do I actually have to wait until Halloween, or is there anything before then?
Great to see you. Take care.
Heyyyyy Miley ... ohhh its not working ? I will get them to check it for me ... I know you gave to cluck the affiliate link before using the code ... so I will look again at my description box to make sure its written correctly ..
4th of July is not a holiday for us so my next holiday will be Halloween although .. there is a Christmas in July collaboration coming up 😍😍😍😍😍
Bonjour et merci pour votre partage 🥳🥰
So welcome thank yoooooo ❤️❤️
💜💙💖 thank you love your vids
Thank You for sharing this
So welcome ❤️❤️❤️❤️
Can you put the rubber silicone in the original mould? And then still use the mould after?