How to Download & Install Betaflight Configurator
HTML-код
- Опубликовано: 8 фев 2025
- Let's Fly RC is here to show you how to download and install the Betaflight configurator. Also walks you through connecting your flight controller and common troubleshooting issues.
Download the latest version of Betaflight and Impulse Driver Fixer here - rotorriot.com/...
0:00 - Intro
0:14 - Download Betaflight
0:56 - Install Betaflight
1:33 - Configure Configurator Settings
1:50 - Connect your FC and Common Connection Issues
2:42 - Using the Impulse Driver Fixer
3:41 - Check your USB cable
4:13 - Outro
Hosted by Let's Fly RC
/ @letsflyrc
Shawn, just wanted to say “THANKYOU” for this. Got a new computer and had to start from “step one”.. normally I just update when prompted..
Felt like a new pilot loading all the stuff we take fro granted..
This will help a lot of new pilots, even old ones.. thanks again
U bloody legend, life saver, go treat ur self and buy something nice you deserve, your help and advice is superb, have a good one 👍👍
thx man afther 4 hours of try to connect to beta fligth it worked thx for the good tutorial keep up the good work
Can you do this on a lap top and if so how special of computer
@ you can do this on any laptop running windows 10 or 11 no special laptop needed
Thank you for that precise explanation 👍👍
Thank you very much !
Thank you!
Thank you for your help
Hey mate, I have tried all of the options that you have listed above and no success. I was able to connect my drone maybe 1 year ago but now betaflight doesn't recognize it. I don't know what to do anymore ??
After that, it says download for just me one user it says that it’s there’s an error and that it needs elevation what is elevation
Mine is Crazybee F4DX Pro V2. I Installed BetaFlight 10.10.0 Configuration, but I don’t know why it shows “Initiating reboot to bootloader “ more than 30 minutes. May you tell what is going on? What should I do? Do I need to put the boot button before I connect to the USB port for flashing? Thank you
Can I flash receiver on beta flight configurator
Thank for your Site. I am new to Drones. Would you please one question? Ive istalled Betaflight Configurator 10.09 I have a FLYSKY FS-i6S and a HolyStone HS720G. Will Beta Configurator work with what I have?
Thanks.
I still can't seem to connect to Betaflight. I downloaded the most recent version, clicked connect, and it failed to open Serial Port. I did this on I variety of cables as mentioned in the video and it still didn't work. I also downloaded the Impulse RC and it didn't connect either! It was a great video, I just don't know what the heck I'm doing.
If your FC has a boot button, try holding that down while plugging in the USB cable. This should put the FC into bootloader mode and allow you to run the Impulse Driver Fixer.
Is not reading my mobula7 hd drone when i plugin, i also download impulse driver fixer nothing.
Are you still having the problem? Cuz I have a solution
Cheers mate!!
good and to the pont
Trying to download betaflight for my tinyhawk rtf and I got an Error message. This firmware version is not supported. upgrade firmware thats supports api version 1.41.0 or higher. how do I do this? Help and Thanks
Did you ever fix it? I’m having this exact issue
No, I ended up getting my old laptop out that has it on still and used it. Sorry not to be any help.
Thanks for the helpful vid.
I'm subb'n ya bro! 😉