How to expand the CONTROLS on your HOTONE AMPERO II STOMP - 10 ideas (or more) | Deep Dive

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 112

  • @PedalPlatform
    @PedalPlatform  2 года назад

    Affiliate links:
    Hotone Ampero II Stomp: redir.love/LhDtiuUZ
    Hotone Ampero Switch: redir.love/aVzBHHj8
    Hotone Ampero Press: redir.love/VbHrcWqP
    Hotone Ampero Soul Press II: redir.love/mxUNzPBP

  • @claytoncampbell7541
    @claytoncampbell7541 11 месяцев назад +1

    I've visited this video about five times in the last month. Wanted to drop in and tell you how grateful I am for it. 🙏

  • @pjmtry7
    @pjmtry7 Год назад +2

    So this is an awesome learning video, when will you do the Ampero control video?

  • @santana2420
    @santana2420 2 года назад +4

    Great video, man! Waiting for more Ampero II videos. I hope Hotone support you

    • @PedalPlatform
      @PedalPlatform  2 года назад +1

      Thank you 🙏🏻 And yes, there will be more! 😁

  • @danguldenzopf9510
    @danguldenzopf9510 Год назад

    I may be late to the party… but …. Your videos on this and the Plethora have helped me so much I can’t even begin to say…. Priceless might be a beginning. Excellent coverage , excellent information, thoughtfully presented. Since I’ve found your channel I don’t even look elsewhere for information and the best way to use a product.
    Well done man !!! Appreciate every minute you put into these videos !!!

  • @BamTechVids
    @BamTechVids Год назад +1

    Thanks for the video. Will a factory reset of the Ampero S2 restore all factory presets? Thanks

  • @xicoescuroII
    @xicoescuroII 2 года назад +4

    What a great piece of work... 🤩
    And I mean it for both: stomp and video.
    Thank you and congrats! 👏

    • @PedalPlatform
      @PedalPlatform  2 года назад +1

      Thank you! 😃

    • @allboutthemojo
      @allboutthemojo 2 года назад

      @@PedalPlatform are most multieffects units setup like this ( complicated)? . Great video but that's a lot of steps to setup the midi and expression pedals

  • @mattwoodward3759
    @mattwoodward3759 7 месяцев назад

    What an amazing video! Thanks for figuring this out, so many ideas for the expression pedal!

  • @GianlucaBoffoli
    @GianlucaBoffoli 8 месяцев назад

    Wow! You're the man! It's absolutely amazing... you did a great job, I need to watch your video several time to understand all the settings you've made... It would be incredible if you can do the same with Ampero II press! I'm using an Ampero II Stage with Ampero II Press and I'm still trying to understand how to set it properly... I need lessons! and your guitar tones are amazing too... best video on YT! Congrats!!!

  • @cliff_makarter
    @cliff_makarter 5 месяцев назад

    Thank you for your examples and explanation! You made my routing problems solved.

  • @kaindog1007
    @kaindog1007 5 месяцев назад

    I get mine next week with the switch. Thanks so much for the info.

  • @SomethingEvergreen
    @SomethingEvergreen 3 месяца назад

    Hey brother, thanks for the video. Any chance you are gonna go over the ampero control? I have the same set up on this video and I want to use the switch and the press.

  • @hanovergreen4091
    @hanovergreen4091 Год назад

    Great Information. Own the Ampero but not Stomp and this a real service to those who do. Should have told people they can use the software to do this without the tapping :)
    Good to see the unit is more touch responsive than the Ampero which is not..for me.
    Best Regards and Best Wishes!

  • @robertdouble559
    @robertdouble559 Год назад

    GREAT video man! Super informative. Awesome tips.

  • @rembo9685
    @rembo9685 8 месяцев назад +1

    Can you use the switch together with the expression pedal?

  • @borrogove
    @borrogove Год назад

    Thanks for the useful sharing. Is there a way I could use both the exp pedal for volume and wah, and the dual switch for changing the banks.

  • @joecaner
    @joecaner Год назад

    Outstanding tutorial!

  • @fsab47
    @fsab47 Год назад

    Great video ! I learned a lot
    Did you get the chance to connect the Ampero II with the "4 cable method" ! I tried but results are crappy ! You're surely more experienced than I am.
    Thanks

  • @ruperthagenauer4020
    @ruperthagenauer4020 10 месяцев назад

    Thank you for this very helpful video. But i still couldn´t find an answer for the most important question: Can i create an auto engage wah pedal? So when it is in the heel-down position - no wah at all and as soon as i use it, it starts wha-ing. Like it is in the Helix or Fractal stuff as well.
    Or the best thing i could pray for: When i play in the rhythm channel and i start using the wah, it jumps automaticly in the lead channel. AND the wah is working. But the ONLY divice i know what is able to do this, is the BOSS GT 1000. I even called Fractal Audio for this question, but they negated it.
    Thanks for your inspiration guys

  • @KCsabi
    @KCsabi 2 года назад

    Great video! You sold this metal box.

  • @12seventy8
    @12seventy8 Год назад

    Fantastic 👌
    Just a question though, is there a work around on how to toggle the on/off switch of wah using the soul press if connected in the expression input?

    • @justloopyone
      @justloopyone 6 месяцев назад

      Stomp (Exp/Ctrl) input settings, can be set only: Expression OR Single FS OR Dual FS and NOT Expression + FS! Because there is just one input jack ( no two like Stage), you CAN'T use both Expression + FS at the same time. (Soul Press II, Ampero Press II). Only Expression OR FS.

  • @lixu233
    @lixu233 2 года назад

    thank you for your sharing,it's really useful for my palying.

  • @remistgelais
    @remistgelais Год назад

    Hello Are you able to select input right for electric guitar on preset and input left for another preset for acoustic guitar thank's

  • @kevinbae5744
    @kevinbae5744 8 месяцев назад

    Thanks for the instructions! Is it possible to connect the volume pedal and the dual switch together? I only see one EXP input on Ampero 2 Stomp and it may not be possible?

    • @justloopyone
      @justloopyone 6 месяцев назад

      No. It is not possible because just one EXP input.

  • @MOAB-UT
    @MOAB-UT Год назад

    Just got mine today. Tones are great but how do I organize presets and use the footswitches to change while playing a song? I saw how to rename and move the (looks like 99) presets. I need like a folder or something with my own song names in it, then an option to toggle difference scenes when in the song for bridge, verse, chorus, etc. Can this be done? If not, I could always send it back and get the FM9. I got "the call" but this little thing does sound great and I love the tiny form factor. I did not seem to be running out of DSP on reasonable presets which included a nice drive, reverb and delay. Not sure what else I need.
    Any tips are appreciated. Looking over the online manual now as well but it is not great. I do with the very nice looper had a rhythm machine built in. My guess tells me they will bring that back and bump the DSP on the Ampero III. I would definitely get that one.

  • @pascalbourhis
    @pascalbourhis 2 месяца назад

    How to connect both an Ampero press + an Ampero switch with an Ampero 2 Stomp ? Thanks

  • @dustblowboro
    @dustblowboro 9 месяцев назад

    Is it possible to have a basisc TRS-jack 2-point switcher just to switch presets up and down? (in ampero mini...)?

  • @AlecBourneMidiMadScientist
    @AlecBourneMidiMadScientist 2 года назад +1

    You’ve done a solid job here Clooney.
    So I have questions - the sounds seem great, the moves with the multiple curves also cool and shoving all this into a built in touch screen has some pluses yes but it appears a bit cramped.
    1. How is the editor assuming there is one and what platforms is it on ? Strictly pc or Mac or can you configure this also on a tablet keeping the whole touch UX going ? Are the big editors much faster ?
    2. This thing indeed screams for midi controllers as do most stomps for that matter - hxstomp is another world entirely once midi’d up .
    How is the detail in the midi mapping ? I’d love to do a good exploration myself on this and see about running the X5 alongside for an all white midi beast of a rig.
    3. Do you know of any plans to build a bigger version of this and are the units cross compatible? This is the main allure of helix, you’ve got the same workflow across them all and can continue working on all of the physical and virtual units no matter what.
    Hotone as far as I’m concerned owe you this gear ( if you wanted to keep it ). Hell of a video my man. You’ve got my attention here and that’s saying a lot!

    • @PedalPlatform
      @PedalPlatform  2 года назад +1

      Thanks Alec! 🙏🏻
      1. Mac and Windows only, IIRC. I haven't used it much yet other than to update firmware, so I'll come back to you on that. So far I've stuck to the touch screen / knobs, and while there are still a few things that catch me off guard (highlight colors for the big encoder could use a tweak, but that's a legacy thing from the original Ampero) and a couple of inconsistencies (FS4/5 are configured in the Global menu, FS1 to 3 + Exp Pedal on the Ctrl/Exp? 🤷🏻‍♂️), it's generally quite fast and easy to navigate. The touch screen isn't as responsive as a modern smartphone / tablet, and if you're dragging and dropping blocks you have to trust that it'll do what you want (narrator's voice: not always the case), but I'd still rate it as an overall positive experience, and you can be up and sounding great in a few mins;
      2. That's the plan for my next video, from what I've seen you have a semi-extensive MIDI implementation, with CCs for every control that moves or can be toggled on / off. So far I've tested it daisy chained into a Boss DD-200, and there were no breakups in communications, so it seems that MIDI through is also doing it's job. I'll see if I can hook up a whole bunch of stuff, including the Plethora, and see if I can get it to complain at me 🤣;
      3. No idea... I only have this on a "here you go, have a play" loan basis, just like I had the original Ampero before it, and while the UX concept is very similar, I don't think they are in any way compatible, as this thing is *a lot* more powerful. So who knows what's coming down the line...
      Thank you again for the kind comments! 🙏🏻

  • @jonsynnestvedt8475
    @jonsynnestvedt8475 2 года назад +1

    I have requested that Hotone adds a pure volume-only boost/cut as an addition to the available options for the Ampero Switch. Would be really handy for solo volume boosts instead of needing the expression pedal.

    • @PedalPlatform
      @PedalPlatform  2 года назад

      I think you might be able to achieve something very similar with a volume block, using it as a cut rather than a boost:
      1) create your preset and set the patch volume where you'd like it for the solo boost;
      2) place a volume block as the last piece in the chain;
      3) lower the position parameter to the level you'd want your rhythm parts to be;
      4) assign that volume block to one of the footswitches.
      Now when you turn the volume block OFF, you get your volume boost... which would look silly, right? Having the light on for rhythm, and off for lead? Read on for extra brownie points:
      5) Instead of assigning the footswitch to the volume block, assign it to the CTRL parameter;
      6) Assign the CTRL parameter to the volume block;
      7) Tap the CTRL parameter until the footswitch light is green;
      8) Make sure the Volume block is on when the light is green;
      9) Tap the CTRL again to turn it red, and your volume block should be off.
      Presto - Green for Rhythm, Red for Solo, as the pedal gods commanded. 😉

    • @jonsynnestvedt8475
      @jonsynnestvedt8475 2 года назад

      @@PedalPlatform Yeah you’re right. And that is an option. I actually use the volume cut block with my MIDI setup. I’m just lazy and want an adjustable global foot switch setting so I can turn it on and not have to set it up for all my patches, etc.
      Thanks for the idea though. If Hotone doesn’t come through I will probably set something up with the ctrl parameter.

    • @MOAB-UT
      @MOAB-UT Год назад

      You seem knowledgeable. May I asked you a few things. Would you get this or a FM3? I have the money but don't want to waste money- I am not a pro. Can I use a 2 button swtich and a wah pedal at the same time? Do they make a 4 or 5 button swtich too- any brand that woudl work?

  • @carminebianco5106
    @carminebianco5106 Год назад

    hi, can you give me your opinion about the quality of this model? and above all would you buy it again? thank you and greetings

  • @DJZeMigL01
    @DJZeMigL01 2 года назад

    jeeeeesus. ... Giganormous Vid of Awesomeness :)

  • @jerrylee8007
    @jerrylee8007 2 года назад

    Very detailed operation explanation

  • @werner77wda
    @werner77wda 2 года назад

    Thank you for that, buddy! Very deep and instructive!

  • @StevenScholten
    @StevenScholten Год назад

    Hi, thanks for posting this. I have a question. Lets say i have 3 patches clean, crunch and lead. Could you use the Switch to turn fx on and off within the selected patch?
    When I gig that would be usefull, for instance switch a chorus on within a clean patch. Thanks !

  • @richgray5762
    @richgray5762 2 года назад

    Excellent presentation.

  • @alvarg
    @alvarg Год назад

    is there a way I can plug into my amp and use the ampero as effects in the loop if so please tell me how.

  • @dzoduyen
    @dzoduyen 8 месяцев назад

    Help pls.. I only can set one side on dual sw to do Ctrl so it can turn on and off multi blocks, but the ether sw only do a single task,.. I can set dual sw đó dual multi stack on Hotone mini..( I do use a stereo cable for dual sw)

  • @cycleproduction3527
    @cycleproduction3527 Год назад

    Thank you for video! I have a few questions:
    1) Is there a way to assign multiple pedals on one button?
    2) When switching patches does sound continue to play or there's small glitch or silence before new fully loaded, like in old Line6 HD500?
    Thank you!

  • @jordanprysmiki5361
    @jordanprysmiki5361 2 года назад

    Great video. Can't wait to try some of this.

  • @MOAB-UT
    @MOAB-UT Год назад

    Can you use the switches and also a Wah pedal at the same time? Are there any switches that are more than two A/B? How is the built in tuner?

  • @formercakid
    @formercakid Год назад +1

    What about a pedal that has a switch when you firmly depress the toe position to activate it? Can the Ampero Stomp II be programed to utilize the pedal in a dual role?

    • @PedalPlatform
      @PedalPlatform  Год назад

      That would be nice, but no... it's either one or the other.

    • @formercakid
      @formercakid Год назад

      @@PedalPlatform 😞

  • @banzlam
    @banzlam 8 месяцев назад

    hi, i just try to calibrate the press, but it so calibration fail, what should i do.

  • @synhet84
    @synhet84 Год назад

    Hi , can i plug 2 guitars in it? Without using a DAW and computer?

  • @lixu233
    @lixu233 2 года назад +1

    hotone has a very good product ---- hotone control,which is a really good controller for ampero II.

    • @PedalPlatform
      @PedalPlatform  2 года назад

      I know, I'm working on a video with the two :) I've already used it with the Plethora X3, btw: ruclips.net/video/NrsOYkBgfXg/видео.html&lc=UgxbalUa9JnOKqkMKS94AaABAg

  • @joecaner
    @joecaner Год назад

    *QUESTION:*
    Do you know if it's possible to run both a FS (Ampero Switch) and an EXP (Ampero Press) simultaneously via M-TRS to 2 F-TRS Y-cable AND then into the Ampero II STOMP's *EXP/CNTL* jack?
    Can the unit recognize and support the configuration? It would be useful when performing.

    • @justloopyone
      @justloopyone 6 месяцев назад

      No. It is no possible. Unit recognize EXP OR FS. No booth at the same time.

  • @smooth_jazz_escola
    @smooth_jazz_escola Год назад

    I have a doubt, how to use the volume pedal and the switcher at the same time??

  • @funkjunkyg
    @funkjunkyg 2 года назад

    great video. By any chsnce so you ever notice low input or out put on this .

    • @PedalPlatform
      @PedalPlatform  2 года назад

      Not really, as long as the input switch is matching what I'm using, I can usually get the levels I want from it...

  • @Fabrice-Blanchet
    @Fabrice-Blanchet Год назад

    Excellent, thank you very much

  • @LordCrushBrasil
    @LordCrushBrasil 2 года назад

    Great tips. Wow! Thank you so much!

  • @gerardvirgo5755
    @gerardvirgo5755 2 года назад +1

    Hi! Just want to ask because my soul press 2 is not calibrating on my ampero 2 stomp and i cant use it as an volume pedal only? Pls thanks

    • @Dr_Bounty_guitar
      @Dr_Bounty_guitar 2 года назад

      Same here. Connected the soul press exp out with stomp 2 exp/ctrl. Trying to calibrate. Calibration failed, it says.

    • @Mark-kc7zi
      @Mark-kc7zi 2 года назад +1

      @@Dr_Bounty_guitar I had to connect it to the stomp from the output (below the EXP out) to calibrate mine.

    • @Dr_Bounty_guitar
      @Dr_Bounty_guitar 2 года назад

      @@Mark-kc7zi i tryed that too. for it worked over the half way of the pedal. so 0% check, 50% check. But it says calibration "failed" when I try to check it von 0% and 100%.

    • @Mark-kc7zi
      @Mark-kc7zi 2 года назад +1

      @@Dr_Bounty_guitar The stomp and EXP pedal is new to me so I can only suggest the obvious, factory reset, firmware update , contact Hotone route , if you haven't already sent it back .

  • @foxgordonwoo1
    @foxgordonwoo1 Год назад

    any video for midi controller ?

  • @MikaelLewisify
    @MikaelLewisify 2 года назад

    How do I create the join (little gold circle) between amp models?

  • @DanCeese
    @DanCeese 2 года назад

    Nice vid! My take away from this vid other than the great ideas you've given us viewers is that: if you want to connect both the dual switch AND also have a volume pedal, just use the pedal that is compatible with the Ampero's FX Loop, am I correct?

    • @PedalPlatform
      @PedalPlatform  2 года назад +2

      Basically yes - and you can use any volume pedal that's designed for audio signals (not an expression pedal). Though keep in mind if you have stereo FX running and want to keep them that way, while placing a volume pedal at the end of the chain, you'll need a stereo volume pedal plugged in with Y-cables (the Ampero's FX loop can be configured to run in stereo, which is nice 😁).
      There is another option, though: use a MIDI controller, such as the Ampero Control. I'm desperately trying to release that video asap, but it has so much content it's proving to be a bit of a challenge. Either way, if you want to see the Ampero Control + Expression Pedal in action, albeit with a TC Electronic Plethora, here you go: ruclips.net/video/NrsOYkBgfXg/видео.html&lc=UgyL0khNQuczHRtbnER4AaABAg. The principles are roughly the same, so...

    • @DanCeese
      @DanCeese 2 года назад

      @@PedalPlatform Thanks again for your advice, and I'll be looking forward to your video with the ampero control!

  • @michaellocke5263
    @michaellocke5263 2 года назад

    Thanks so much for the awesome video!.....love my A2Stomp I got a couple months ago....decided I had to have the switch & APress & took the leap and got the A Control also!....I'm a noob at this midi thing so my brain is mush trying to figure out how I want to organize all the choices for switching...so I'll definitely be watching for your video on the Control....
    One problem I need to resolve is my computer (PC) doesn't recognize my stomp, so I haven't been able to use the editor except I was able to update the firmware...I get a no device connected msg.....any thoughts?

    • @PedalPlatform
      @PedalPlatform  2 года назад

      Hi Michael, thank you for the kind comments! 🙏🏻 I went through the same issue with connection, but at the time didn't document it on video. There's another piece of firmware you need to install to fix that, but it's hiding in the support pages rather than the main A2S page. Try this link: www.hotoneaudio.com/support/2. If it doesn't take you there, follow the Support link at the top of the page, then MultiEffects, Ampero II Stomp, and look for a "Solution of Ampero II Stomp Hardware & Software Connection Problem". The readme for that only talks about USB Audio, but it's a general connection fix. Get that, install it, and that should do it for you. 😃

    • @michaellocke5263
      @michaellocke5263 2 года назад

      @@PedalPlatform hey thanks for the tip...but I tried the Solution firmware update & still no luck....so I uninstalled & reinstalled the driver & editor...still "no device connected?....I've gotta figure this out so I can download & upload patches and backup my stuff...any other ideas?"...thanks again.....

    • @richgray5762
      @richgray5762 2 года назад +1

      @@michaellocke5263 had same issues. Fix for me was downloading recommended doc which was a zip with a 1.10 bin file that then worked to connect to software and then updating latest firmware 1.0.5 through the regular software that was previously never recognizing by the unit.

    • @MaTTheWish
      @MaTTheWish 2 года назад

      I had the same problem and had to fiddle around with the support page, that had an additional download. Once I did that it worked on Windows.

  • @MikaelLewisify
    @MikaelLewisify 2 года назад

    Is it possible to use the Ampero switch and an expression pedal at the same time? There’s only one input.

    • @justloopyone
      @justloopyone 6 месяцев назад

      Because there is just one input, it is NO possible.

  • @НикитаС-ч8к
    @НикитаС-ч8к 2 года назад

    Great video, thanks!

  • @brammanck
    @brammanck 2 года назад

    Is there a way to use the switcher and the expression pedal at the same time? Or is the hotone control the only way?

    • @PedalPlatform
      @PedalPlatform  2 года назад +1

      Only via MIDI, yes...

    • @allanknight7528
      @allanknight7528 Год назад

      @@PedalPlatform I'd also like to use both at the same time. Any chance you have done a video on hooking them up with MIDI? If this method is used would I need the Ampero Control as well?

  • @ADC.Guitar
    @ADC.Guitar 3 месяца назад

    Bravo!!!!

  • @chrisfit
    @chrisfit 2 года назад

    How is the dsp limit? I’ve heard it runs out of space quickly.

    • @PedalPlatform
      @PedalPlatform  2 года назад

      I haven't tried to break it yet, but I've had some relatively complex chains running for this video and it worked. I'd say that for 95% of common guitar sounds it's perfectly fine, but one of these days I'll go chase the other 5% 😄

  • @MaTTheWish
    @MaTTheWish 2 года назад

    Very good video,my expression, volume pedal stopped working suddenly. Anyone ever had that problem? Was working fine.

    • @PedalPlatform
      @PedalPlatform  2 года назад

      Thank you 🙏🏻 Have you checked the cables, and that it is active in the Ampero menus? 🤔

  • @divar1511
    @divar1511 8 месяцев назад

    SUPER !!! :)))

  • @les7118
    @les7118 6 месяцев назад

    BUT this thing has only one input and if you connect footswitch you may forget about exp pedal

  • @spiritzweispirit1st638
    @spiritzweispirit1st638 2 года назад

    Hotone' needs to send a 'Software UpDate' for an on screen 'Looper On' notification! 🎼

  • @MikaelLewisify
    @MikaelLewisify 2 года назад

    Just bought the Astomp but don’t have possession of it yet. I already have a hotone volume/wah. Any idea if I can use that as an expression control with Astomp?

    • @PedalPlatform
      @PedalPlatform  2 года назад +1

      If it has an expression pedal out (not the audio in / out), yes. If not, then you can only use it for audio. 🫤

  • @jurepecnik9054
    @jurepecnik9054 Год назад

    we still wait for the MIDI controler review :D

    • @PedalPlatform
      @PedalPlatform  Год назад

      I know... 🤦🏻‍♂️ I filmed a good chunk of it, but still need a bit more work. It'll come! 😬

  • @freshmusicinc9408
    @freshmusicinc9408 2 года назад

    👌

  • @poucasnotas4349
    @poucasnotas4349 7 месяцев назад

    ☕☕

  • @robertdouble559
    @robertdouble559 Год назад

    ....volume knobs....😆

  • @madsam7582
    @madsam7582 10 месяцев назад

    "HoT Tone" has 2 "Tees"
    It must be pronounced either Ho-Tone, or Hot-One.
    I like Ho-tone.
    It sounds more musical.

  • @wolvesandguitars
    @wolvesandguitars 2 года назад

    your easy to read when you dislike stuff. for someone that paid actual money for the Stomp 2 its disheartening. As your opinions should be somewhat un biased when a company sends you gear. Even your playing is lacking due to you not being into the gear.

    • @PedalPlatform
      @PedalPlatform  2 года назад +3

      Thank you for that comment, that made me stop and think for a minute. There's quite a bit to unpack here, so let me try in some random order that hopefully will make sense in the end:
      On reviewer's bias:
      - I *should*, and definitely try to, be as unbiased as possible with gear that is sent to me "for free". In fact, not having dropped money on that gear allows me to see it for what it is, without buyer's remorse or confirmation bias;
      - That said, being "unbiased" doesn't mean I have to like something just because it was "free". If I did that, I would be accused by others (and myself...) of being a paid shill - which I definitely try not to be;
      - Being "unbiased" also doesn't mean not having an opinion on something - it means giving it a fair shake before making my mind up;
      - But an integral part of that "unbiasedness" (is that a word?... oh well, it is now) is pointing out things that I consider to be shortcomings / failures / plainly idiotic, and preferably any potential workarounds. If I didn't, I'd be remiss. Or biased...
      On my being easy to read:
      - (the following is for context only, not for the sobs or tiny violins): I have a full time job, a family, and I'm a one-man production crew operating from a tiny room in an apartment in a relatively noisy building; every time you see me on camera in one of these tutorial videos I will have already spent at least 20/30 hours (over several days) in pre-production, and probably at least a couple of hours on the day itself setting up cameras, mics, guitars, gear, and *after* a full day's work, because I can only record at night after most people have gone to bed and it's quiet enough to hit the big red button with an open microphone;
      - Sometimes I will look a bit fed up, or my breathing will sound a bit labored, and my playing will sound like crap - and it will probably have *nothing* to do with the gear I'm demo'ing, and everything to do with the camera that just overheated, or the recording software that just crashed in the middle of the 3rd take, or the effing neighbor's dog barking for 2 straight hours, or... 🤷🏻‍♂️
      But I do understand that sometimes that might be a disservice to the gear, and I struggle with that thought. I'm learning to stay away from the cameras when I'm not feeling up to speed, because I want the energy in the videos to be positive; on the other hand, sometimes I also just want to put out the videos asap, because the information I want to convey might be more important than me looking all smiley and happy. It's a fine line I'm still learning to thread.
      But lastly - and more importantly: please don't let any RUclips Random Reviewer such as myself dictate how *you* feel about your gear. We don't have that right.
      As an example: there are reviewers for whom nothing but a Fender Custom Shop will do, and consider my Player Strat a "decent beginner's guitar" (if they're feeling generous...) because it costs less than $1000 and it's not made in the USA. Turns out it's my most expensive guitar, and I have shitloads of fun with it. If I were to listen to them, I'd throw it in the fireplace and quit music altogether. My Marshalls aren't even handwired... 🤷🏻‍♂️
      I do like the Stomp. I'm still working on a follow-up to this video, using the Ampero Control, but life got it in the way. I'm hoping to get it out in the next few weeks, but at this point I can't make any promises. I will have to send it back at some point, as it's only on loan, and the only reason I probably won't buy it is because I have other amp modellers / effects units that are more suited for my current needs. But if I were in the market for a compact, expandable, great sounding all-in-one unit with a decent price, I'd certainly be thinking about buying it.

  • @marceli155
    @marceli155 9 месяцев назад

    do you need gloves ?? I give you one !