Diagnosing Pump Failure
HTML-код
- Опубликовано: 22 авг 2024
- As we get deeper into our tech tips, we will start exploring more complicated topics. Today Ryan will explain how to diagnose pump failure--if your vehicle drove a few miles and stopped, this is a video for you!
#performabuilt #performabuilttransmissions #techtiptuesday #techtipthursday #4l60 #4l60e #4l80 #4l80e #pump #diagnosis #transmission #transmissionbuildersoftiktok
The flex plate part of this topic was for me… I needed to hear it 😂😂😭
There there 🫂
Been waiting on you to do diagnostics videos!!🔥🔥🔥
Lockup is next week
@@PerformaBuiltTransmissions🔥🔥🔥🔥
I have a 4l60e that blew the front pump seal out of it. The truck was turned off quickly afterwards. I can turn the trans shaft by hand, but can’t turn the front pump shaft by hand, should I be able to turn it? I am curious if the pump siezed up after blowing the seal.
No that shaft is the stator and its stationary all the time.
@@PerformaBuiltTransmissions thanks so much!
If your converter doesn't spin freely before you bolt it up just pull it out and replace the pump, you're screwed.
Always good videos but please don't record in the vertical position. Turn your phone.
We only do short videos like this so they work on multiple platforms. Videos over 10mins we use full on equipment in a full frame. Sorry
Sounds like poor spacing people not reading the instructions
Not lately. But a educational video ahead is only good
Ever had one totally quit pumping for a few trys, rev it til it pulled again working perfectly maybe 10 times til you think it’s good then no warning fire it up no gears? Rev it and it will ease in to pulling but normal driving no gears..
Is it full? Is the filter clogged? thats all it sounds like unless you have a severe wiring issue in the vehicle.
Yes full, fluid is clean, haven’t checked filter yet. Wiring?! Why yes I have had some issues lately was troubleshooting an intermittent miss, and other random things. Occasionally the battery light comes on, voltage is steady and good with a meter but gauge shows 20v..thought was unrelated.. maybe I’ll stare at the wires some more..thanks!
Transmission just joined the chat out of the blue!😂
@@turdpolisher1466 20v is bad! you need to correct that voltage issue asap or you will never keep a trans in the vehicle.