How to use the LINE 6 HX STOMP with OTHER pedals // Featuring
HTML-код
- Опубликовано: 24 авг 2024
- Link to all HX Stomp Presets HERE:
►►www.heyworship...
Link to all EXPANSE Packs HERE:
►►www.heyworship...
JET Pedals Store / Save 10% Automatically with this link!:
►► jetpedals.com/...
FREE Helix/HX Tone Secrets PDF Guide HERE:
►►jimmy-cooper.m...
FREE POD Go Tone Secrets PDF Guide HERE:
►►jimmy-cooper.m...
Get your Worship Pads Bundle HERE:
►► www.heyworship...
Get your 2022 Digital Worship Planner HERE:
►► www.heyworship...
OTHER SWEET DEALS:
JET Pedals Store / Save 10% Automatically with this link!:
►► jetpedals.com/...
Church Sound Made Simple (Course)
►► churchsoundmad...
X32 Mastery (Course)
►► x32.church/?ref...
Get Sunday Keys 2022 Edition HERE:
►► sundaysounds.c...
Westminster Effects Pedals:
►► www.westminste...
Let's hang out:
►► www.heyworship...
WATCH NEXT:
○ HX Stomp Playlist: • HX Stomp Mini Board Bu...
○ JET Pedals Playlist: / watch
v=C5kmi2c96Wo&list=PLKBqjDj5XyB6F7m2rcaKaVTN3pWA-Wq18
○ Digital Planning for Worship Leaders: • Digital Planning for W...
○ Worship Guitar Essentials Playlist: • How To Dial In Your OV...
○ Shepherd Your Congregtaion Playlist: • Our First Attempt At W...
○ Gear Up For The Weekend Playlist: • Worship Leader Vlog | ...
ALL MY GEAR:
www.heyworship...
If you're in the market to purchase some gear, use these links to support this channel at no extra cost to you! Thank you so much for your support!
COME SAY HI!
Instagram: / heyworshipleader
Facebook: / heyworshipleader
DISCLAIMER: Links might be affiliate links which help support this channel. If you purchase a product with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting HeyWorshipLeader.com so I can continue to provide you with free content each week!
And make sure you subscribe to my channel! / @heyworshipleader
JET Pedals Store: ►► jetpedals.com/discount/HEYWORSHIPLEADER?ref=19
This was very helpful.
You literally would answer every question as I was thinking if it.
that's awesome!
I just recently found your channel, love it! Really good reviews and tips. You really got some beautiful tones here!
Thanks so much!
This was exactly what I needed! One question: going out of the HX into the PA what do you do? How do you maintain the stereo image?
We have a stereo set up at our church building so I just go out the left and right with 2 cables into the 2 direct boxes. And then they can decide how much width is necessary for the FOH and I can have glorious stereo in my in-ears!
Thanks for this video man, i was almost pulling my hair out because of this volume loss using the send/return. When you mention this, thank god it’s not just me and then…daaaa…of course, that’s why they put a volume there 🤣🤣🤣
Best wishes from Brazil! God bless you!!!
Awww, thank you for using the CompIQ MINI Pro Compressor ❤🙏
I’ve had this thing for years and still love it!
@@HeyWorshipLeader thank you!
Thanks!! Helped me setup my pedals with the HX Stomp!!
the TRS splitter cable I use isn't labelled like yours on the TS ends but they're color coded the same as RCA cables. TRS out polarity can reversed in global settings if the Stomp, the cable, and the outboard gear have a disagreement. You can use those cables to add effects to recorded tracks, or channels in a live setting. If you have a mixing board and there are jacks labelled "insert," those send and return signal using the TRS end. Check your mixer's manual for the insert polarity and connect to the appropriate input/output on your effect processor (and make sure it's set to send and receive line level signal). I've used a Boss GT-1 multieffects unit but the Stomp would work too; just keep in mind with the Stomp, the effects you're working with are mostly models of irl effects units designed for guitar and bass.
Love the guitar tone of the background music !
Thanks
great tutorial! thanks for this!
Glad it was helpful!
For a stereo TRS cable, tip is Left and (R)ing is (R)ight.
I do! Dad is a carpenter. =)
Awesome!
I was hoping to get a digitech drop pedal for my birthday and I was wondering if it would work with the hx stomp as I bought a vox wah pedal and was disappointed to find out it was incompatible
TIP is Left / RING is Right
Please help!! I have 2 stereo pedals a reverb and delay, I also have a mono delay how many TRS cables will I need to keep the stereo image .. love your channel
Hello, I think it is the clearest video on youtube, thank you very much. I will also talk to you about something. I only use the Hx stomp as an amp and cabinet. I have a single pedal (source audio Collider) for reverb and delay on my pedalboard. It has 2 inputs and outputs. I want to use it in stereo like you did in the video. Accordingly, in which slot should I put the fx loop block? Do you have any advice on this subject or in general?
I've noticed the tone suck on the Fx Loops of the Stomp, now i just run my reverb after the HX Stomp and it sounds way better
Man, I was excited when he mentioned moving the fx loop around, but of course he didn’t get the same issue I get, i.e., my delays and reverbs sound VERY different when placed ANYWHERE after the amp block.
WTH… as I’m writing this, he’s saying his shimmer is brighter after the amp, and it is! Mine is the opposite, i.e., delay repeats become lofi when placed after the amp block.
Ugh. So annoying, since I have to use 2 amp blocks in order to keep stereo delay/reverb (fx loop) when placed before the amp block.
Btw, to keep things consistent, I can even set the fx loop to mono and move that block before and after the amp block. Difference in tone when after is obvious and not good.
@@gilguajardo7808 You have to run pedals at different settings after vs before an amp simply because the amp drastically shapes the tone and messes with the mix level of the fx as well. Have you tried running them after the amp and then adjusting the pedal settings a bunch? It's likely you're used to the sound of fx into an amp. Although I wonder if there's an actual problem with your Stomp. And are you running the global settings line out or instrument out for the fx loop?
@@SethDStanley I’ve heard people mention the same, but it doesn’t make sense to me. Especially since I can put my reverb after the HX Stomp, and it sounds fine. If it sounds different than running the reverb before the Stomp, I didn’t notice the difference.
So, why should it sound SO different (in a bad way) when I place the same reverb before or after the amp block from within the Stomp’s FX loop? It shouldn’t.
Yes, everything is set to line level and unity gain.
hey, do you think you could use Line 6 FBV Express MKII with mainstage to create worship patches?
Instead of fractions you could just use millimetres and centimetres like the rest us😭
Haha so true!
Blasphemy!
If only 😭 metric for the win
No
I'm American, and completely agree.
Thanks for this vid! Made me subscribe. I recently purchased a Helix and sent it back because I couldn't get any good overdrive tones. The amps, verbs and delays sounded great. But every time I headed in to overdrive, it sounded fizzy & buzzy to my ear. I'm thinking of going this route with an HX and pedals. I assume in this small rig, you would use the tuner on the HX. Also, would you recommend a compressor in the front? Thanks!
Welcome! yes, I use the tuner on the HX itself most of the time because I also like the tap tempo...but sometimes would rather have the 3rd FS. The comp on my board is the decos fx Comp IQ: becosfx.com/product/compiq-mini-pro-compressor-pedal-for-guitar-bass/#description
@@HeyWorshipLeader Thanks!
might be a silly question.... but in this setup, is using the tuner on the HX Stomp viable? I'm going through the pros/cons in my head, and my only concern would be a popping noise whenever I engage the tuner.
I've never heard a popping noise when engaging the tuner
I'm setting up a build revolving the hx stomp. But if I only had to choose 1, would it be best to use external drives vs. External reverbs vs. External delays?
Does the hx stomp have good drives, or is their delays and reverbs better?
I will say at the front...I don't think you can make a wrong decision. If you don't already have a 'must-have' drive, I'd say go with an external reverb. The HX Reverbs are getting way better but not as high end as some of these others ones. Te drives in the Stomp are great and so are the delays. But then again...the reverbs are great too....the differences you hear are going to only be for you....because no one will be able to tell in a live context...that's how good everything has gotten
Metric is so much better than imperial/US customary
ah man, I wish you showed us how to connect it all to an amps fx loop.
Does the stereo send actually auto sum or are you just going to lose half of the stereo effects in the stomp?
The stereo send retains the stereo image. If you only use one side, it's supposed to sum to mono, not lose half your signal...same is true on the out puts
If you want to use a compressor on the hx stomp can you just use the same set up but put the overdrive pedals after??
some people like a comp after an overdrive,,not my favorite in this use case...but if you want to use the internal comp, you'd have to put the drive in the fx loop..but then you'd miss any wet effects...unless you put them all in there and just run wet effects into the your amp...just remember that you'll lose the stereo imagine unless you run stereo amps
@@HeyWorshipLeader Thanks very much sir. Really appreciated.
Where are the links? I can’t seem to find them
I really want a small set up like this but want to use real amps. Can you show me how you would do that with a setup like this.
Here you go: ruclips.net/user/shortslRb-URv_TuE
Man that’s awesome stuff!! Can you use POD GO with a Jet Lamb and Revelation?
Thanks man...yes you can!
@@HeyWorshipLeader Is it more practical to use the HX Stomp instead?
Since there are 2 returns, could you have 2 separate FX loops?
In my situation I have an RC-30 looper that I want to send to, as well as an MXR Carbon Copy that I want to add into the chain.
Is there a way of me sending the Left side of the Send/Return to the RC-30, while sending the right side of the Send/Return to the MXR Carbon Copy?
That way I can add the MXR into the chain on the HX stomp, while also utilising the RC-30 looper.
Yes you can do two mono loops. Still need to come out with a stereo split why cable and go to your two different petals and come back with a single patch cable back into each return
@@HeyWorshipLeader thanks 😊 that's super helpful
I know....hahaha....now to build a pedal board with my stomp..hmm
do it!
I get putting drives before the HX Stomp but where would you put amp in a box type pedals such as the UAFX Lion or Tonex. Would you put them before the HX or in the FX loop?
No wrong answer here...It depends on where you want your wet effects. There are 3 simple options 1) run comp, drives, and AMP Box all before the HX Stomp and use HX stomp for only wet effects or whatever else you'd want after your amp 2) put the Amp Box in the FX loop so you can move it wherever you want 3) run everything into the AMP box, putting the am after the HX stomp
Can you turn off the effects loop block? And by doing so, do the external pedals signal automatically run into the front of the HX Stomp?
sorry, no
Im a steamfitter by trade and a shred-eye knight by night But that bend the tape I’ve used for years and years and years about half the time as I’ve been a shred-eye knight Use it everyday
I've watched this video and several of your others. You have great content. What pick do you use?
Thanks man! I use these: amzn.to/3LEWwkS
How do you dial in your tones on the jet pedals lamb with your stomp? I've been trying and can't seem to get a tone that doesn't sound garbled.
I like putting the tone up higher than normal. And also bringing the gain down (further than I did in this video) and boosting the volume. I feel like that is a sweet spot...it also depends on how the amp is set up for sure...maybe I should do a quick video about that!
@@HeyWorshipLeader Please do! I was sold on what this pedal could do especially via Midi but because I can't seem to tame it, I'm on the verge of selling. Help get me off the ledge! Haha.
Hey...I wanted to correct myself. On the Lamb, the volume needs to be lower for more high end to come through....I'll def make a video but wanted to update my response here!
how would I connect two stereo pedals to the stomp though? do i need 2 of these special cables?
No, you wouldn’t need two of the cables you would just need one to come out of the HX stop because it’s a single stereo jack. From there, you just use regular (left and right) patch cables all the way back into the return of the stomp.
@@HeyWorshipLeader Brody you a real one for that. I don't even follow jesus like that but you were the only one to explain this clearly. Thank you very much!
@@HeyWorshipLeader Quick follow up then I'll get out of your hair. What if I want to have my stereo delay before the stereo reverb? And the delay only has one input and the reverb is the one with two inputs. - Lice
I didn't know this guy was a worship dude when I clicked on the video. Then he said "intentional." Christianese!
haha! Caught me :)
Hey Jimmy. Just curious, I have an overdrive that is not midi. Can I use the foot switch 4/5 to add in an overdrive and have the stomp control it?
Yes! You could put the drive in the FX Loop and control the FX loop the way
Yep sooooo I see you got the lamb pedal but is it a LAMB OF GOD pedal ?
haha! might be
Thank you for the video. Please tell me how to specify only the final amplifier in the effects chain (if I connect the preamp to the stomp) I can’t find one, how to create the chain correctly then? If you put just AMP, then you get one preamp + the second ... will this give unnecessary distortion / noise?
Do you run two cables on left and right output to stereo di to get fx to stay in stereo, or can you still get stereo with mono output?
I like the drive going in the input on hx stomp, question do i have to make a block to make the external drive work with hx? Cause i have tried the external drive tru the fxloop of the hxstomp, made a block but then it seems like there’s some volume loss..
You know...I've never actually put an overdrive in the FX Loop....I have always just gone straight through the front. sounds like an experiment for another video! Maybe with the LION.
@@HeyWorshipLeader ahhh, so how did you make the Lamb sound with hx stomp? Just a regular chain? Or does your Fxloop block includes your external reverb&drive?
Use the metric system, so much easier to
haha...have you seen this? ruclips.net/video/JYqfVE-fykk/видео.html
Can you purchase that split cable anywhere??
I believe so. Here’s a link: amzn.to/3ZgROyp
Hi! In my fx loop I have some overdrive and distortion that goes into my delay, which then goes out in stereo. But the problem is that I cant seem to get any stereo in doing it this way. Do you have anything to help with this? Thank you!
Greetings Jimmy thank you for sharing your knowledge and insight, your videos have helped me tremendously. I am thinking about using the HX Stomp on a pedal board with Strymon big sky and delay. Do you think these pedals would be compatible running them together, and does it make difference in tone running them in mono with a mono amplifier.
Thanks man...I think any effect will sound better in stereo when listening through headphones...for I've use, mono is great. No problem at all...also, some people have noted that they have had problems with strymon stuff in the FX loop of the Stomp...I tried it the other day with my friends sermon pedals, and it worked flawlessly
@@HeyWorshipLeader Thanks for responding and for sharing your knowledge. I have heard mixed reviews as well however, I will be purchasing a strymon big sky and will see what happens thanks again I appreciate it God bless.
Hey Jimmy, good video. Will the daisy chain be good to power the other pedals?
Does CIOKS enough to power all 3 pedals? Can’t understand HX using 3A, 1 slot gives 660mA… how it works 😮?
This a question I was wondering but if my brain isn’t wrapping around it but Ik you answered but if you’re running a compressor in the stomp (I’m using the David Hislop Patch) I wanna start using my Morning Glory and later get a Superbolt. Do I run it after the stomp? Just asking seeing as the stomp will also be my amp
use the fx loop to have the morning glory and superbolt, that way you do hx stomp compressor, FX loop (contains external drives), then stomp amps
Would love to know what amp and cab you’re running on the Hx
I'm using my own Blues Junior Tone matched preset: www.heyworshipleader.com/tone-match-presets
Hey guys wpuld be so thankfull if you can help me out. I have an HX STOMP with 2 extra swiches plus a Volume pedal. Thing is i want to use all of that stuff but can only use the 2 extra swiches or the volume pedal at once. I know tjat you kan buy a cable to use both at the same time but can only use either footswich 4 or 5 in that case. Do i need to buy another pedal to conect with my volume pedal with the HX stomp.
Thanks for reading this and hope you can help me. Have a nive day😁
How about putting the drive in the loop with delay or reverb can I still keep a stereo spread on the delay?
I'd like to know this to haha
Te quiero mucho
Does anyone know what the TYJ on his hat is?
I’ve gathered a hint of christianity in the video. That and the throat coat comment…maybe it’s for “Throat Your Johnson”?
“Thank You Jesus” it was a hat they gave away at a camp. I played the last few years.
are you using Christian pedals? LOL
The Lord sent him a vision to not give his money to the needy, but to spend it on pedals and gear. Praise heeeemmm,!
Another way to make those awkward measurements easier to handle is to use millimetres like people in the 21st century 😜
So much that could've been edited out from this video, I'm out 3 min.
You cans scrub through any video on RUclips. Helps if you're pressed for time :)
You lost me at throat coat ..
haha
if I have a delay pedal how should I connect to the hx stomp? Through the fx loop or infront of the stomp input?
I would go thru the fx loop just like the reverb in this video