Make a video FULLY disassembling the controller, or any other ps5 stock dualsense controller, and show us how to change the front, back cover, dpad cover, how to change triggers etc. I haven't seen many videos on how to fully mod a controller like these big custom controller companies like AIM, Battle beaver, scuf, hypr, etc.
I just got the Volcanic Red controller and Scarlet Red back shell from ExtremeRate, I think the metallic red ExtremeRate matched better better than the shitty off colored plastic red from the Volcanic Red Controller.
Just finished the Rise4Metal About to do a Warzone solos test now I worked two shifts today and still managed to do it in about a 2 hours dedicated, first time taking the controller apart, Had to take it apart twice after the first complete put together As of now it’s done Works great I own two scuf controllers and am excited to see if these last more than 3 months
I tried to install one on the ps5 controller that came with my ps5 slim and the two holes on the cable didn’t line up with the little pins had to buy a used controller and fit perfectly.
please what did you mean 12:30 "i dont care mapping analogs" ? Is that cable needed to set up the paddles with the analogs clicks ? Im sorry i ain't english native I wanna be sure thank you anyway, going to order some
as far as i know the only part that wont work is the clicky trigger kit because they updated the triggers on the 040. feel free to use my link in the description and code Bombarded to get 10% off site wide!
Hi, I wanted to know if you should also put the neoprene strip in the back button contacts? because they also provided neoprene in my kit Thank you very much for your attention and availability.
So in the offical extreme rate video that used square pads for the k3 and k4 buttons not using these, are the buttons still clicky or should i use the pads?
I followed all the steps and I watched several different videos and I know I did it right I have the same exact kit and controller you have and the light blinked but didn’t map correctly the first time and the second time I did it exactly how you showed because it was a little different and now it won’t turn on at all. Is there a fix or is it just faulty please let me know asap if you can
so you dont need the little red wire to contect ? I have also a BDM-030 but i dont want to conect the red wire. Does it mean just that tha back paddles cant be the analog R3/L3 ?
Is there a way to get a clicky kit on the 040? Mouse click triggers? I have a bdm-030 I bought the clicky kit and this back paddles. And I broke the pcb board holes trying to fix drift soldering. I need to buy a bdm30 and cant find one anywhere or a used one for the parts or pcb. I got six 040s I had to return. If i cant get a bdm30 is there a way to get the mouse click triggers on the 40? And have u tried installed the clicky kit on this
i have installed it on the 030 but not the 040. i do not believe it will work because they updated the triggers on the 040. you may be able to pick up a older controller at gamestop or even ebay.
@@xMalinowy to be honest, im not sure. im pretty sure they ship world wide tho. also if you use my link and discount code bombarded you will get 10% off.
quick question I had installed this kit and everything works perfectly, especially when connecting with Bluetooth to my laptop. The issue was that when I opened up games, no response at all and it doesn't even detect the controller. is there any way you could help think of a solution?
You have to make sure fpc cable and the extreme rate cable are making contact. That neoprene thing should spilt apart. Put that under the original fpc cable and then put the extreme rate cable on top. Or use the tape to attach it directly to the mobo where the holes align
so i dont think you can get just the cable but here is the link for the kit. the price has dropped and if you use discount code Bombarded you will get 10% off. and dont forget to subscribe! extremerate.com/products/remappable-rise-remap-kit-for-ps5-controller-bdm-030-rubberized-dark-gray
I’m late but has anybody got the orange thing with the tape that doesn’t fit onto the prongs for it ? Mine is literally too small for my controller ? Edit: they sent me the 010-020 kit instead of the 030-040 lol
im not 100% sure but i believe you may be able to. i know that the contact point on the ribbon cable to the main board is the same, but i think they may have changed something with the trigger assembly from bdm030 to 040. Lmk if it works.
no. the pins need to go in the holes to make a good contact. best way to get them to stay in is to get them in and then sandwich the main board down on to it before flipping it over. please dont forget to subscribe!
@@bombarded9579 ok one more question . Will it still work if I don’t screw the back plate motherboard down ? I lost the screws for it and I was wondering if I didn’t screw it
It may still work but you really should get some screws in it because if it moves out of places the buttons won’t line up and stop working. The kit should have come with extras.
Yes, they are pretty easy to put back in. Just make sure that you put them back in the correct way because if you flip them they wont work. The blue tab should be facing up. If you go to around the 9 min mark on the video you should be able to see what im talking about.
ok. it sounds like you are having an alignment issue. make sur you are pressing it all the way down when you close the shell and try to make sure it has the pin in place. if you have discord send me some pics of it and i will see if i can see the problem. The server link should be below the video.@@llnosama9205
it is possible but unlikely. if you are worried about it just make sure to touch something metal before you start to discharge any static that you may have.
No, it has a different ribbon cable for the bdm030 and 040. I posted a link in the description for the kit. i believe you can select the bdm010/020 kit on the amazon link if that's what you need..
amazing work! and well explained, waiting for hair triggers for bdm 040
Thank you! im glad you found it to be a good video. i apricate the support!
First person to mention the 030 works on the 040. Thank you✨🙏
you are very welcome! and thanks for the sub! you are welcome to join the discord if you like, link in the description.
thank you so much man!! I just bought a new ps5 controller and I had plenty of concerns about compatibility so thanks!!
@@jack.2c34 glad I could help! Don’t forget to subscribe!
@@bombarded9579 k
Waiting for them to come out with a full clicky set for the bmd40
Make a video FULLY disassembling the controller, or any other ps5 stock dualsense controller, and show us how to change the front, back cover, dpad cover, how to change triggers etc. I haven't seen many videos on how to fully mod a controller like these big custom controller companies like AIM, Battle beaver, scuf, hypr, etc.
thank you for the suggestion, thats a great idea!
dont forget to sub!
Thank you for this video I needed to know how to install this bad boy.
I just got the Volcanic Red controller and Scarlet Red back shell from ExtremeRate, I think the metallic red ExtremeRate matched better better than the shitty off colored plastic red from the Volcanic Red Controller.
Just finished the Rise4Metal
About to do a Warzone solos test now
I worked two shifts today and still managed to do it in about a 2 hours dedicated, first time taking the controller apart,
Had to take it apart twice after the first complete put together
As of now it’s done
Works great
I own two scuf controllers and am excited to see if these last more than 3 months
let me know how the feel for you after a few games.
@@bombarded9579 yea bro
The metal paddles feel great
Had a full day of warzone.
Extremely impressed coming from the scuf side
Very helpful. Thanks
Glad it was helpful!
I tried to install one on the ps5 controller that came with my ps5 slim and the two holes on the cable didn’t line up with the little pins had to buy a used controller and fit perfectly.
what is the model number of the controller that came with your PS5 slim? and please dont forget to sub!
You got to make sure you get the right kit for the right model number. It's really easy to tell. Just Google how to tell the different models apart
Do you know if i follow every step of your video will it work for the bdm 30 controller? My controller is bdm 30. Thanks
yes, the install will be the same. dont forget to sub!
please what did you mean 12:30 "i dont care mapping analogs" ? Is that cable needed to set up the paddles with the analogs clicks ? Im sorry i ain't english native I wanna be sure thank you anyway, going to order some
No worries. yes. so if you want to be able to map the analog clicks to the back buttons you would need to solder that cable to the main board
So will any BDM 30 work with BDM 40 cuz I want to get the g3 textured red rize4 BDM-030 but I have a BDM-40 plz reply fast I'm about to buy tomorrow🙏🙏
as far as i know the only part that wont work is the clicky trigger kit because they updated the triggers on the 040. feel free to use my link in the description and code Bombarded to get 10% off site wide!
@bombarded9579 thanks I got worried it wouldn't work 😅 the one I wanted is out of stock on websites so I'll just be getting it on Amazon
@@bombarded9579 thanks I got worried it wouldn't work 😅 the one I wanted is out of stock on websites so I'll just be getting it on Amazon
anytime! dont forget to subscribe!
Hi, I wanted to know if you should also put the neoprene strip in the back button contacts?
because they also provided neoprene in my kit
Thank you very much for your attention and availability.
it defiantly wouldnt hurt to put it on. this build was my 3rd personal controller and i didnt add it to any of mine and have never had any issues.
perfect, it was just to understand better, thank you very much.
you are very welcome!
So in the offical extreme rate video that used square pads for the k3 and k4 buttons not using these, are the buttons still clicky or should i use the pads?
mine still are, and they work fine, but if extreme rate used them it couldn't hurt to put them on.
Saw another installation guide that did one of the steps differently, would like to know if this worked and the buttons remapped no problem.
which step? and yes, it works perfectly.
Smarttrigger + the Paddel set doesn’t work together 😢
I think the clicky kit for the dpad and face buttons for the 030 should work for the 040
I think they might. i installed one on my bdm030 but didnt like it so i removed it and didnt try on the 040 controller.
@@bombarded9579 what didn’t you like about it
It was to sensitive.
Pretty sure that every kit except clicky trigger is compatible as that is what was changed with the 040, the model and design of the triggers
the ribbon cable is not the same in the bdm 010-020 kit as in the 030 kit. they are NOT cross compatible. everything else is pretty much the same.
@@bombarded9579 i meant for 030 kits. im aware of the 010 and 020 being their own respective models with the trigger modules
i have a bdm-040, did you buy the one for bdm-030
yeah the one i got is linked in the video description. it's an affiliated link so if you buy it from there it will help the channel out.
@@jegii- Extremerate is developing kits for the 040, if you use the 030 kit you'll notice the trigger housing does not fit
Does this work with only the d-pad and the x o square triangle buttons? Because i saw you only put the orange strip on the d-pad side
The way i have mine setup, yes, if you solder the small strip you can map the R3/L3 and the red wire is to map the touch pad.
I followed all the steps and I watched several different videos and I know I did it right I have the same exact kit and controller you have and the light blinked but didn’t map correctly the first time and the second time I did it exactly how you showed because it was a little different and now it won’t turn on at all. Is there a fix or is it just faulty please let me know asap if you can
join the discord so it will be a bit easier to help. discord.gg/UnZejAwSWV
Does it work for ps5 slim controller? I saw that some say that the pins don't match, is it true?
im not 100% sure. i would need to know what model number the controller is
Yes just got the slim and they do not match. The model is 040
@@SirScubaSlice ok, so the console doesnt really matter. as long as the controller is a bdm 040 then the 040 kit will work
so you dont need the little red wire to contect ?
I have also a BDM-030 but i dont want to conect the red wire.
Does it mean just that tha back paddles cant be the analog R3/L3 ?
you only need it if you want to map the touch pad, and it requires it to be soldered.
if you want to map the analog sticks there is another ribbon cable that will need to be soldered to the main controller board
Is there a way to get a clicky kit on the 040? Mouse click triggers? I have a bdm-030 I bought the clicky kit and this back paddles. And I broke the pcb board holes trying to fix drift soldering. I need to buy a bdm30 and cant find one anywhere or a used one for the parts or pcb. I got six 040s I had to return. If i cant get a bdm30 is there a way to get the mouse click triggers on the 40? And have u tried installed the clicky kit on this
i have installed it on the 030 but not the 040. i do not believe it will work because they updated the triggers on the 040. you may be able to pick up a older controller at gamestop or even ebay.
Have some issues with them it turns off and on in the Game what should I do or check? I did the same but somehow it doesnt work constantly
join the discord, it will be a bit easier to help you out. discord.gg/Ku7C2pxbVZ
Hello , thanks for vid
I have to solder something with this kit? You said is only for touchpad right?
you will only need to solder if you want to map the touch pad and analog sticks
@@bombarded9579 its works with -030 and - 040?
I think i have - 040, FCC ID:AK8CFIZCT1B?
@@bombarded9579 and how long take to shipp to switzerland?
@@xMalinowy to be honest, im not sure. im pretty sure they ship world wide tho. also if you use my link and discount code bombarded you will get 10% off.
@@bombarded9579 i have FCC ID:AK8CFIZCT1B
I think its -040, from bottom R1 looks like, im right?
quick question
I had installed this kit and everything works perfectly, especially when connecting with Bluetooth to my laptop. The issue was that when I opened up games, no response at all and it doesn't even detect the controller. is there any way you could help think of a solution?
what game launcher do you use?
one of your butttons are stuck hook your controller up to a tester it will tell you which one@@bombarded9579
all of mine work fine. i have no issues at all. @@humblecreations4154
You have to make sure fpc cable and the extreme rate cable are making contact. That neoprene thing should spilt apart. Put that under the original fpc cable and then put the extreme rate cable on top. Or use the tape to attach it directly to the mobo where the holes align
What screwdriver did you use for this I hate the one it comes with?
amzn.to/4anCmFK
Where do I buy the padlles flat cable, I don't know where it is available?
so i dont think you can get just the cable but here is the link for the kit. the price has dropped and if you use discount code Bombarded you will get 10% off. and dont forget to subscribe! extremerate.com/products/remappable-rise-remap-kit-for-ps5-controller-bdm-030-rubberized-dark-gray
I’m late but has anybody got the orange thing with the tape that doesn’t fit onto the prongs for it ? Mine is literally too small for my controller ?
Edit: they sent me the 010-020 kit instead of the 030-040 lol
that will deff do it. lol. glad you were able to figure it out! please dont forget to subscribe! and join the discord. discord.gg/CWetNfPQGS
quick question, can i use the bdm-030 clicky trigger kit on a bdm-040 controller?
im not 100% sure but i believe you may be able to. i know that the contact point on the ribbon cable to the main board is the same, but i think they may have changed something with the trigger assembly from bdm030 to 040. Lmk if it works.
Thanks for the reply, will do!
W Brodie
Hey i did everything it looks the same do u know why it wouldn’t work?
what isn't working specifically?
@fnbcryzz5908 Send me a pic of the inside of your controller on discord Bombarded_17
Same problem, can u help me😢
@@AlessandroDezzi sure, what isn't working specifically?
How would I know if my controller is the right model for the kit I’m getting?
If you open the controller it will be printed on the board.
The 2 holes on my ribbon won’t stay put on the outside. Can I put them in the inside of the plastic piece then close it ?
no. the pins need to go in the holes to make a good contact. best way to get them to stay in is to get them in and then sandwich the main board down on to it before flipping it over. please dont forget to subscribe!
@@bombarded9579 ok one more question . Will it still work if I don’t screw the back plate motherboard down ? I lost the screws for it and I was wondering if I didn’t screw it
It may still work but you really should get some screws in it because if it moves out of places the buttons won’t line up and stop working. The kit should have come with extras.
@@bombarded9579 ok . Thanks
You’re welcome!
for the ribbons on the triggers I took them out cause I got the wrong extreme rate kit, can I put them back in easily ?
Yes, they are pretty easy to put back in. Just make sure that you put them back in the correct way because if you flip them they wont work. The blue tab should be facing up. If you go to around the 9 min mark on the video you should be able to see what im talking about.
@@bombarded9579 alright thank u
You are very welcome. if you need the correct kit i put a link in the description. Don't forget to like and sub! 😁
@@bombarded9579hello do I need to put the ribbon in the white square little box ?
yes. make sure to not put it in the wrong way. if you go to the 9:30 min mark in the video you will be able to see how it goes.
Does it work kit bdm 020 on dualsense bdm 040
no. there is a specific kit for the 020.
Is the response time still good?
yup. the back buttons work just as well as all the other ones.
one of my bottons wont work plz help i got every thing together like yours and it wont click its like its stuck
pop the cover off and make sure its lined up. also there are some pins for the inner buttons. make sure they are in.
@@bombarded9579 it looks the same like nothing is wrong
does the button click with the cover off?@@llnosama9205
@@bombarded9579 Yeah, it's the metal button itself That doesn't click.
ok. it sounds like you are having an alignment issue. make sur you are pressing it all the way down when you close the shell and try to make sure it has the pin in place. if you have discord send me some pics of it and i will see if i can see the problem. The server link should be below the video.@@llnosama9205
Is the grip Nice?
yes, they feel really good. They aren't to sfot but the have nice grip.
So i can use this on bdm 040 without any worries?
yes. the link for the one i used is in the video description.
@@bombarded9579 thx, last question tho can i damage the motherboard of the controller with static electricity?
it is possible but unlikely. if you are worried about it just make sure to touch something metal before you start to discharge any static that you may have.
If I follow this exact steps with all the right materials I should be fine and not break my controller?
Just take your time and make sure the ribbons are inserted all the way, you should be fine.
Hey bro, I have the BDM 40 with this 2.0 kit and the 2 prongs on my controller don’t match the holes on the connection, do you know why?
send me a pic of it on discord bombarded_17
It doesnt want to map you know why
i have a video on how to map it, check it out and dont forget to subscribe! ruclips.net/video/GffAJQrtZkM/видео.html
it it still doesnt work let me know.
What's difference between bdm 030 and 040?
Something with the triggers not exactly sure
However if you bought the paddles for the 030 and have the 040 it will work.
I just finished mine
i believe they updated the triggers. but not sure of the exact change.
@@bombarded9579you might be right about the triggers
yea, they wernt for me.. i like the stock triggers much better.
@@bombarded9579 stock triggers means? Bdm 010?
Can you use the bdm20?
No, it has a different ribbon cable for the bdm030 and 040. I posted a link in the description for the kit. i believe you can select the bdm010/020 kit on the amazon link if that's what you need..
My controller is a CFI- does it work?
what is the first numerical digit of the number that starts with a G on the back above the FCC ID?
@@bombarded9579 i don't find a G there
Ok. There should be a long number that starts with a letter and the second digit should be a 1,2,3 or a 4. Let me know which one it has.
@@bombarded9579 do you mean f32900 this
U have a bdm-30 then
Bruh u didnt take the tape off the dtrip to make it stick