Я так искал что то подобное, я планирую постройку, но ничего аналогичного, то что мне прям понравилось и то что я хочу в голове - я не находил. До сих пор. Вы сделали то что в моей голове, именно то что я хотел, и то как я это хотел. Спасибо за это видео. Я скоро начну работу)
thanks for liking this build, please see some of my plywood build you might like it as well, keep in touch when you start working your foam kayak would love to answer all queries and please if you could subscribe to this channel that would be awesome, I will be starting my composite kayak soon
That's awesome! Question, just paint? No "poor man's fiberglass"? I'm thinking of doing one of these and almost all have it. Seems like a lot of would. I'd be good with skipping it😊
I'd be interested in how you attached and mounted the pedal drive. It's possible you may have shown that in a previous video and I just missed it. I just don't see the need to buy and Oldtown or Hobie for thousands of dollars when you can get relatively inexpensive pedal drive units from Amazon or Ebay and then either build your own kayak or adapt an aftermarket drive to a cheaper kayak like those sold at Cabelas. Just need to figure out how to mount them and make them readily removable for running in shallow water.
You can install anything, you just need to reinforce that portion you wanna attach your part like that pedal drive on this foam kayak i glued a piece of wood so i can secure them just before i lay fibre cloth and resin on it
Thanks, I just used PVA wood glue on this one. Check label when you buy should be suitable for foam bonding. Ye’ll out if you need anything I’d be happy to help..,
Great job bud!......but have an doubt, will not the expoxy resin melt the styrofoam (regular one) ? If not then can I use any type of resin that's available in the market?......... And the last question 😅, a coating of fiberglass enough (in terms of durability and waterproofing)??
Thanks man, you can only use epoxy resin on styrofoam, you also not to worry about waterproof styrofoam is already waterproof laying a fibreglass will make your boat hold its shape and making it stronger
@RokinDaCazbah that will still do just reinforce that whole deckwell erea with 6mm marine ply stick it to the foam before you glass where your seat located up to your footwell
Hey man i wanted fibreglass but got this stuff called fibreglass tissue, its like REAL thin fibreglass... do you think that will be good enough with polyester resin on cheap styrofoam
@@KustomDIY thats not the issue bro because you packaging tape over the foam first like when they make foam vietnamese fishing boats, thing is i ordered fibreglass and got 30gm tissue not 300gm mat and not sure if itll be strong enough
So its not strong enough to thin, use 225gsm or 300 gsm and use that 30gsm that you got for final layer that what it use for that will help smoothen the surface as well. You are not binding the foam and fibre glass in this process just imagine if you bump in, you will create a hollow portion on your boat and you only have very thin wall
Thanks man, I dont have templates for this one, really with foam you don’t need templates just know what size you want build it up and shape it to what you like, this one is 3600mm long, 920mm wide and 390mm deep
Haven’t tested that yet, I think its more than enough I am 75kg, the battery is 22kg, the motor is about 7kg and the water line still below to my deck line. I will try to do weight test on this one, i will let you know
I like your boat/kayak very much. Are you able to paddle it with the kayak paddle comfortably at the 880 width? I was really hoping you would finish the >VC seat as that is what I wanted to build for my kayak. What issues did you run into that made you change?
No problem at all with paddle, did you see my new kayak plywood thats 940 width and still easy to paddle. With the pvc seat I just thought its a bit weak thats why I change it, I can still make it work just reinforce that but it will just make it heavier
@@KustomDIY I'm preparing to make small styrofoam boat,so I tested wood glue.(small samples).Simple wood glue and Henkel wood glue-waterproof.Samples were in water whole night.(after drying).Result both samples were disappointing.
@@KustomDIY Thanx a stack! I'm aiming at doing exactly that size (35kg) - perhaps mount a solar panel (25kg) on a roof (extra 15kg) as well, battery (25kg), motor 10kg, accessories & kit approx 40kg's... So I'm probably looking at 150kg BEFORE I even get aboard! Any advice / warnings / cautions / do's & don'ts?
@@joatmofa0405That time when I did my float test me and my two older daughter was on that kayak with all that weight + 28kg agm battery and more/less 10kg motor we’re doing a round and still shes good so I reckon its not a big deal. What you can do as well to gain more on load displacement is increase the width of the boat by maybe 30/40mm also buy lithium battery 75% lighter than AGM
@@KustomDIY I took a piece of dock foam , used to use it for archery 🎯. Then I made into a paddle raft, camped out on it, ( it was covered in wood and epoxy, then I recut a better shape, and used tight lock spray foam with flex seal, it's now a giant nerf paddle board... photos.app.goo.gl/NYhw5HrUHTRUz4mTA.
How much does it weigh? And what brand of epoxy resin did you use? I've been looking at total boat 5:1 epoxy resin but I would like to know what you used and how heavy is the finished product?
Thanks a lot, appreciated much., I didn’t took a drawing on this one. If you want I can give you some measurements and sketch on how I did it. I think working on this kind materials (foam) is easy you just need to shape it to what you like you don’t to worry if you make a mistake as you can always glue a new piece on it
Thanks man, The wider and the ticker you can get is much better although it doesn’t matter as its easy to join them together by glue. Just yell out if you need some help I’d be happy to help.
No hay nada en el Mundo cómo sus primer viaje en la cosa que tú ha echo. Nadie puedes entender la Gripa! Yo lo echo! Yo mé llamas Juan Palomo, yo me lo guiso, yo mé ló cómo! MÉ ALLEGRO PARA USTED! BIEN ECHO!
wondering why the epoxy doesn't attack the foam? doesn't epoxy dissolve eps and extruded foams? Obviously in your build it doesn't! Just making plans to build a light weight rowboat from extruded foam boards, but was going to avoid the epoxy route, and use cloth and titebond ll glue but epoxy is much stronger.
You can use epoxy resin to xps or eps foam with no harm I think your talking about polyester resin thats the one that you can’t use in foam as it will attack/melt the foam
No sorry, but planning to do this pattern again in my next project , just stay tuned or consider subbing this channel hit the bell so don’t miss a thing. Thanks
This kayak measures L3400mm x W880mm x D390mm Material Used: XPS foam 6mm marine ply ( for top rail and bow reinforcement) Wood/foam glue Foam cutter Sanding disc 36 grit for shaping And some basic tools
Prang eto cguro ang try q gayahin sir..,mganda kac stabilizer nya sa tubig..,tapos dami lalagyan..,sir pwede mkarequest paano nyo ginagawa ang painting?? Galing ngpgkagawa eh..,ndi aq mxado marunong sa painting..,my ngawa aq na outrigger ng kayak q pro mdaling matatanggal paint pgbumangga na..,slamat kbayan..,
This one cost me around $250 , I bought my xps foam from market place so its not really expensive. I don’t know how much this foam if you buy it new. I think if you really work on this full-time you’ll be good in 2 weeks time or less
Gracias, este es un desinyo de kayak para un solo hombre, pero ella maneja facilmente a 2 personas cuando hago la prueba y aun funciona sin problemas sin ningun problema
Sorry mate, not at the moment but I will make proper drawings once i sort out/ have the software, what I did is just draw roughly my deck layout/ plan view and side view scale it to what measurement I want and work from there
Where did you get the styrofoam that you started with? Or even what kind of foam did you use and in what form did it come? I mean in Big Blocks, or rectangles or just what I really couldn't get that figured out from the video. Although I'm very impressed, it looks better then most commercial fishing kayaks out there:-)
XPS foam its a multi-use foam sometimes they use it for insulation m. They come in different size and thickness the thicker and wider you get its better although it doesn’t really matter as it very easy to join using wood glue, sorry for my poor video, please check some of my plywood kayak build
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I want to build myself one. Fortunately youtube recomended your video. Going to steal some of your ideas! Great build!!!
Thanks man appreciate much
Wow! Very nice ang Impressive DIY kayak Boss New friend here watching from UAE good job! Well done thnx for the share
Thanks kabayan Baka pwede mo ring r share sa mga ka fishing buddies mo, ano kaya kung mag kayak diyan ang ganda ciguro
Hands down! The coolest paint job!
Thanks man , I may have to do this again on my next one
That has got to be the most beautifully lined and layed out foamies I've seen. You have an amazing eye.
Thanks, appreciated much
Absolutely a piece of art!
Nice nice....very creative
Really nice work🤗
Thanks man, check out some of my plywood build
Very nice 😍
Ang ganda nea 😊
Amazing! Very Creative 😊
Dang that is pure craftsmanship.
Thanks man
Woww nice...
Cool yak!!
Thanks man
Great work!
Thanks man, appreciated much
Cool another Aussie from WA. I use to live in Girrawheen, sure miss it. Living in South Florida now.
Cheers mate
Ito ung pinakamaganda para sken sa mga kayak nyo sir. 😍😍 Sobrang ganda neto.
nice work!
Well done! Looks solid and very stable.
Thanks mate, please check some of my plywood fishing kayak builds
Nice job.
Thanks, appreciated
Awesome boat there, makes me wish I was a bit shorter!
Good job Mate !
Thanks a lot mate, appreciated much
Nicely done
absolutely love the paint job!
Я так искал что то подобное, я планирую постройку, но ничего аналогичного, то что мне прям понравилось и то что я хочу в голове - я не находил. До сих пор. Вы сделали то что в моей голове, именно то что я хотел, и то как я это хотел. Спасибо за это видео. Я скоро начну работу)
thanks for liking this build, please see some of my plywood build you might like it as well, keep in touch when you start working your foam kayak would love to answer all queries and please if you could subscribe to this channel that would be awesome, I will be starting my composite kayak soon
@@KustomDIY Конечно же я подписался, конечно посмотрел уже несколько ваших других роликов, в будущем я посмотрю у вас все видео.
Good job
That's awesome! Question, just paint? No "poor man's fiberglass"? I'm thinking of doing one of these and almost all have it. Seems like a lot of would. I'd be good with skipping it😊
Nice job I planning to build it at my own do the plans is ready? Thanks for the sharing
thanks a lot, yell out if you need any help
@@KustomDIY if you don't mind, the plans will really help. Thanks
Bellissimo, complimenti per la realizzazione originale. Grazie per il video
Grazie per questo bellissimo commento molto apprezzato
Good job sir❤
I'd be interested in how you attached and mounted the pedal drive. It's possible you may have shown that in a previous video and I just missed it. I just don't see the need to buy and Oldtown or Hobie for thousands of dollars when you can get relatively inexpensive pedal drive units from Amazon or Ebay and then either build your own kayak or adapt an aftermarket drive to a cheaper kayak like those sold at Cabelas. Just need to figure out how to mount them and make them readily removable for running in shallow water.
You can install anything, you just need to reinforce that portion you wanna attach your part like that pedal drive on this foam kayak i glued a piece of wood so i can secure them just before i lay fibre cloth and resin on it
Great work ,you are a talented guy.Especially like the paint effect.What is the best glue to use on the foam blocks .......Thanks
Thanks, I just used PVA wood glue on this one. Check label when you buy should be suitable for foam bonding. Ye’ll out if you need anything I’d be happy to help..,
complimenti! davvero un buon lavoro e ottimo risultato
Grazie mille, per favore resta sintonizzato e prendi in considerazione l’idea di sottoporre questo canale a molto piu fai-da-te in arrivo
Great job bud!......but have an doubt, will not the expoxy resin melt the styrofoam (regular one) ? If not then can I use any type of resin that's available in the market?......... And the last question 😅, a coating of fiberglass enough (in terms of durability and waterproofing)??
Thanks man, you can only use epoxy resin on styrofoam, you also not to worry about waterproof styrofoam is already waterproof laying a fibreglass will make your boat hold its shape and making it stronger
Please have a look on some of my builds and if you could subscribe to this channel that would be great again thanks
wondering what kind of foam you used?
I’m using XPS foam on this one, insulation fiam you can also use EPS foam
Very cool build. I'm going to have to try. What's the finished weight approximately?
Thanks man, it weighs 34kg
I like that.
Thanks man
What kind of hardener you use? Sorry for my english.. But i would love to know it.. Since i know nothing about it
I used fibreglass resin and fibre cloth
One word. WOW
Thanks a lot
got some more ideas,,thanks!
very nice job by the way!
Thanks, you might like some of my plywood kayak projects please check them out
what paint did you use. is that you painted directly on the foam
I wrap the foam with fibre glass cloth and epoxy resin over it then i just paint that with cheap normal paint and couple coat of epoxy resin over it
What’s the max weight capacity for this foam kayak build?
250 kg easy
what would need to be done in order to be able to support at least 700lbs max capacity?
@RokinDaCazbah that will still do just reinforce that whole deckwell erea with 6mm marine ply stick it to the foam before you glass where your seat located up to your footwell
Hey man i wanted fibreglass but got this stuff called fibreglass tissue, its like REAL thin fibreglass... do you think that will be good enough with polyester resin on cheap styrofoam
Polyester resin will melt the foam so I don’t think u can use it as they are not match. Please check, use epoxy resin and 6 -8 once fibre cloth
@@KustomDIY thats not the issue bro because you packaging tape over the foam first like when they make foam vietnamese fishing boats, thing is i ordered fibreglass and got 30gm tissue not 300gm mat and not sure if itll be strong enough
So its not strong enough to thin, use 225gsm or 300 gsm and use that 30gsm that you got for final layer that what it use for that will help smoothen the surface as well. You are not binding the foam and fibre glass in this process just imagine if you bump in, you will create a hollow portion on your boat and you only have very thin wall
Nice one kuya..
Bro thats beautiful. Do you have the templates of this kayak?
Thanks man, I dont have templates for this one, really with foam you don’t need templates just know what size you want build it up and shape it to what you like, this one is 3600mm long, 920mm wide and 390mm deep
Have you tested weight cap? If so what is it
Haven’t tested that yet, I think its more than enough I am 75kg, the battery is 22kg, the motor is about 7kg and the water line still below to my deck line. I will try to do weight test on this one, i will let you know
I like your boat/kayak very much. Are you able to paddle it with the kayak paddle comfortably at the 880 width?
I was really hoping you would finish the >VC seat as that is what I wanted to build for my kayak. What issues did you run into that made you change?
No problem at all with paddle, did you see my new kayak plywood thats 940 width and still easy to paddle.
With the pvc seat I just thought its a bit weak thats why I change it, I can still make it work just reinforce that but it will just make it heavier
Very nice, but which glue is used ?
PVA wood glue
@@KustomDIY I'm preparing
to make small styrofoam boat,so I
tested wood glue.(small samples).Simple wood glue
and Henkel wood glue-waterproof.Samples were
in water whole night.(after drying).Result both samples were disappointing.
@@socamirkovic4046 find a pva glue that suit foam bonding and if you can let it dried overnight
@@KustomDIY I dried sample with "Henkel wood glue-waterproof" 24h, and then that
sample 24h in the water. Glue was
melted.(almost)
Where are you from
Did you seal the foam with something like fiberglass?
Its laminated with 270gsm fibre glass cloth and coated with epoxy resin
Looks great! Do you in sydney?
Thanks mate, I’m from Perth
VERY NICE!!!
What are the Length x Width x Height dimensions?
Thanks, 3500mm x 880mm x 390mm
@@KustomDIY Thanx a stack! I'm aiming at doing exactly that size (35kg) - perhaps mount a solar panel (25kg) on a roof (extra 15kg) as well, battery (25kg), motor 10kg, accessories & kit approx 40kg's...
So I'm probably looking at 150kg BEFORE I even get aboard!
Any advice / warnings / cautions / do's & don'ts?
@@joatmofa0405That time when I did my float test me and my two older daughter was on that kayak with all that weight + 28kg agm battery and more/less 10kg motor we’re doing a round and still shes good so I reckon its not a big deal. What you can do as well to gain more on load displacement is increase the width of the boat by maybe 30/40mm also buy lithium battery 75% lighter than AGM
@@KustomDIY Thanx - good advice!
@@joatmofa0405 no problem just yell out , I’d be happy to help
I believe about 36" wide would work for me. I also considered the outer chines to lean out a little on the bottom for stability
That’s 93 cm wide 1 inch wider to what you like
Did you fiberglass it?
Yes, I lay up 270gsm fibre cloth and epoxy resin
Nice rig!!! I'm building a camping ( giant paddle board ) I settled for flex seal to seal it, did you just spyay paint?
Good on you, I just used spray paints ( water base) and couple coat of epoxy as top coat
@@KustomDIY I took a piece of dock foam , used to use it for archery 🎯. Then I made into a paddle raft, camped out on it, ( it was covered in wood and epoxy, then I recut a better shape, and used tight lock spray foam with flex seal, it's now a giant nerf paddle board...
photos.app.goo.gl/NYhw5HrUHTRUz4mTA.
Looks good and massive, that will end up a nice fishing platform
How much does it weigh? And what brand of epoxy resin did you use? I've been looking at total boat 5:1 epoxy resin but I would like to know what you used and how heavy is the finished product?
Im been using 5:1 from Platinum epoxy resin. The whole boat weighs about 32kg w/o the accessories
genial!!! cuales son las medidas?
Thanks man
do you have plans for that bad boy?
I’m working on the proper drawing and details on this build so I can share
@@KustomDIY Great! I was about to ask the same question. Please update us once you complete it. This is truly a work of art!
I like the design a lot. I would love to duplicate it.
Would you have any designs down yet?
Thanks a lot, appreciated much., I didn’t took a drawing on this one. If you want I can give you some measurements and sketch on how I did it. I think working on this kind materials (foam) is easy you just need to shape it to what you like you don’t to worry if you make a mistake as you can always glue a new piece on it
@@KustomDIY I'm more than interested.
I think I can get 240cm but 120 cm xps boards, is that the size you used roughly ? looks lovely fella, good work !
Thanks man, The wider and the ticker you can get is much better although it doesn’t matter as its easy to join them together by glue. Just yell out if you need some help I’d be happy to help.
Mantap mas.....
Terima kasih sobat
No hay nada en el Mundo cómo sus primer viaje en la cosa que tú ha echo. Nadie puedes entender la Gripa! Yo lo echo! Yo mé llamas Juan Palomo, yo me lo guiso, yo mé ló cómo! MÉ ALLEGRO PARA USTED! BIEN ECHO!
Thanks a lot appreciated much
wondering why the epoxy doesn't attack the foam? doesn't epoxy dissolve eps and extruded foams? Obviously in your build it doesn't! Just making plans to build a light weight rowboat from extruded foam boards, but was going to avoid the epoxy route, and use cloth and titebond ll glue but epoxy is much stronger.
You can use epoxy resin to xps or eps foam with no harm I think your talking about polyester resin thats the one that you can’t use in foam as it will attack/melt the foam
Do you have video to show how you painted plz?
No sorry, but planning to do this pattern again in my next project , just stay tuned or consider subbing this channel hit the bell so don’t miss a thing. Thanks
Could you watch transformation video its the same process when I do that blue waves pattern over black
hello i want to make a kayak for the sea with styrofoam and wood can you tell me dimensions and what materials you used
This kayak measures L3400mm x W880mm x D390mm
Material Used:
XPS foam
6mm marine ply ( for top rail and bow reinforcement)
Wood/foam glue
Foam cutter
Sanding disc 36 grit for shaping
And some basic tools
Prang eto cguro ang try q gayahin sir..,mganda kac stabilizer nya sa tubig..,tapos dami lalagyan..,sir pwede mkarequest paano nyo ginagawa ang painting?? Galing ngpgkagawa eh..,ndi aq mxado marunong sa painting..,my ngawa aq na outrigger ng kayak q pro mdaling matatanggal paint pgbumangga na..,slamat kbayan..,
I apply 2 coats of clear epoxy resin after painting
Do you mind giving an estimate of how much this project cost you and how much time you invested. This is a truly impressive build
This one cost me around $250 , I bought my xps foam from market place so its not really expensive. I don’t know how much this foam if you buy it new. I think if you really work on this full-time you’ll be good in 2 weeks time or less
Wowooowww gandaaaaa.....foam Lang ba Yan?hehe galing galing nmn po...keep it up po...god bless amazing talent.....
#palistaPo
QUERÍA SABER COMO NAVEGABA CON PESO DENTRO, FROM PANAMÁ SALUDOS Y GRACIAS POR SU VÍDEO. 🤗🤗🇵🇦🇵🇦🇵🇦
Gracias, este es un desinyo de kayak para un solo hombre, pero ella maneja facilmente a 2 personas cuando hago la prueba y aun funciona sin problemas sin ningun problema
do you have the plane ¿
Just stay tuned I might give the plan to the lucky subscriber
Wow
Thanks man
Another aussie!!! Where are you based?
WA mate
@@KustomDIY thoughts I saw WA PLATES. did you have plans to follow for the plyak?
Sorry mate, not at the moment but I will make proper drawings once i sort out/ have the software, what I did is just draw roughly my deck layout/ plan view and side view scale it to what measurement I want and work from there
Awesome!!! 😍
Where did you get the styrofoam that you started with? Or even what kind of foam did you use and in what form did it come? I mean in Big Blocks, or rectangles or just what I really couldn't get that figured out from the video. Although I'm very impressed, it looks better then most commercial fishing kayaks out there:-)
XPS foam its a multi-use foam sometimes they use it for insulation m. They come in different size and thickness the thicker and wider you get its better although it doesn’t really matter as it very easy to join using wood glue, sorry for my poor video, please check some of my plywood kayak build
Google "sawfish kayak" for the basics of the build.
I think I’ll just buy my own kayak
👍🏼
lo agarra una ola y lo parte en dos
cada vez que atrapa las olas solo juega y cabalga sin problemas
You don't show the making!
cheon cheon nhi
Seodulleo ilhaleoga
Kayak? Boat.
Well It’s a boat in the kayak category
This video does not explain anything.
👍🏼