Wouldnt it be better to just install the drivers as Minimal Install if you dont plan to touch your gpu's setting (or if you know 100% of the time your gpu's fans are spinning)?
yo love your vids i have a AMD Radeon Rx 6950 XT and my games would run nice until i get into like fights in game my fps drops a lot for no reason and only when i fight idk if you could help me with that. but keep up the good work
@@resonance32807 I have the same thing with Fortnite, don't know if they really patched anything from the last video you made but I'll get that stutter every now and then...on 1440p dx12, textures on epic but everything else low, I hit that 256 fps but I've seen it drop to 110 randomly
@@resonance32807 and what should i keep the anti aliasing? i have a 6950 and it’s so annoying that that i can’t make the game look good just to stop that random drop
Yeah but my gpu is already cool most of the time (max 60C) so I don’t bother for it. I’ve also undervolted in the past but no performance differences for me.
hi, i just reinstalled the drivers and my fps is locked on 30 and whatever i try i cannt get more. i cannt play games smoothly it would be ok if it was 60 but 30 .... i dont know what to do, there are no tutorials on yt with same problem that i have. could you pls help me
Make sure Radeon chill or any FPS limiter IS NOT ON. Common culprit is MSI afterburner plus Riva statistic tuner…uninstall any overclocking software and MSI after burner plus riva statistics
Does it have a similar feature like nvidia ansel where you can do freecam and take in game pictures? I love to take screenshots but not all game has photo mode
good video, here's what i might add. - if you have an "OC" card, you basically dont need to touch the power tuning settings at all since they have their own overclock config in place. you don't really have a cpu bottleneck, 6800xt's run fine with even i5/r5s. I have a 6750xt red devil and theres basically no performance difference if i manually tune the gpu frequencies. But if you want to overclock, set the max to something 100-200mhz higher than native and set the minimum to a value that is 100mhz less. You can max out vram tuning but make sure to keep it on default and not fast timing. - you may have done this already but to anyone who may read this, always make sure that you route 2 separate pcie cables to your gpu from psu if u own an rtx 3070 rx6700 and above, I didnt realise this for a while and when i did fix it, my fps in gpu bound games like cp2077 and rdr 2 went up by at least 10-15 fps. - If you use freesync, make sure to use the FRTC in the amd control panel or RTSS to set the frame rate cap to 2 or 3 frames below your monitor's refresh rate, this ensure that there is no judders or screentear. - a lot of the settings in the "advanced" section are for DX9 games only, so they basically arent even relevant. - you specify to enable "center" in the as the gpu scaling mode, but you have gpu scaling disabled, so im pretty sure it does nothing in your case correct me if im wrong.
I do indeed hAve three separate pcie cables for my gpu and I don’t use any frame cap for freesync since I do run most games above 240 fps, so when the fps is above the refresh rate freesync does not kick in, I only prefer freesync to serve as a mitigation system for when I drop frames below 240. As for the center scaling mode, I explained in my last video because if one decides to use stretched res it will ensure that the resolution is display scaled, not gpu scaled which causes some marginable input lag. Thanks for the feedback! Glad to know I’m not too cpu bottlenecked
hey i have are question for games whre you want to see Enemies on long range like hell let loose in my case whats are the best settings for visibility?
Those cannot be changed in amd except for VSR, which is virtual super resolution. In hell let loose make sure to set your view distance to the highest and turn up that 3d resolution scale. The best thing you can do is to upgrade monitor resolution, preferably to 1440p. However super virtual resolution can upscale a 1080p monitor to produce a 1440p image virtually(so not perfect). Do this only if you have a powerful powerful gpu.
I have problem. my rx 6700 xt turn off while gaming several minutes and monitor says no signal, there is no way to turn it on until I force restart the pc. any solution?
Just trying to clear some things up here since it has been quite a controversial thing and i dont know what to do at this point, Why would you never want to use vsync with freesync? Coming from nvidia just got my rx7900xtx i am on a 165hz 1440p panel, with my 3090 I would enable vsync+gsync on the driver level with 162 fps frame cap and vsync off in game "frame cap below max fps of monitor would prevent vsync from kicking on which in turn would improve frame times and make gaming smooth" how is freesync any different when i do it in adrenaline like i did with my gsync setup it doesn't feel smooth and snappy like with nvidia
Because to my knowledge vsync is never a good thing to turn on for the sake of input latency…this vid was made for more competitive gamers in mind. The idea of combining vsync and freesync is not unheard of, however I feel like it is completely unnecessary because freesync is all u reallt need. Keep your fps at 162 and ur hertz will be at max 163-164. Vsync added driver level or not will only cause possible complications.
I cant open my adrenaline software. I tried uninstalling the CN folder, run ddu and reinstalling drivers but I still cant open. does anyone know how to fix this?
Game become black screen with free sync turn on but appears after free sync turn off from amd adrenaline.. how to fix this problem ?? I need advantage of free sync turn on
Enhanced sync for me at least only goes up to around 193 hz. It’s really odd as it dosent support 240 HZ, thays why I don’t use it. But if ur using like 60hz or 75hz it’ll be good.
@@resonance32807 okay so why would you not say that in the guide? you didn't do a very good job of explaining it, you brushed over it and just said, "don't use enhanced sync." i've got a 75hz monitor, and i had to come to the comments to find out that it's good for me, but not for you when you could have taken 5 seconds extra to explain that in the video.
@@xilverknight155 enhanced sync is only optional, it’s not gonna be game changing in terms of input delay or smoothness. Free sync is much much more important and relevant.
@@xilverknight155 especially with the fact that it dosent work for me, that rules it out as universally optimal. The whole world isn’t centralized around you man…think about it
@@resonance32807 the average person is going to have a 60-75hz monitor. the average person coming to find these options and settings adjustments is probably going to benefit from it. even if it's something that doesn't work for you, you are making a guide where a ton of people could potentially benefit from that setting being turned on. you verbatim said, "don't use enhanced sync" why? why should we not? you took no time to explain it when you could have said, "enhanced sync milage may vary. with lower hz monitors, it is potentially beneficial, but with higher hz monitors you may not see much of a difference. try for yourself to see if it's right for you." instead of "don't use it" If telling someone they could potentially benefit from turning it on because they have a 60hz monitor isn't universal because not everyone has a 60hz monitor, that doesn't mean telling people not to use it because it doesn't work for YOU is. also, not everyone is gonna have a freesync monitor. The whole world isn't centralized around you man...think about it.
Install full version of drivers. Uninstall current one and reinstall new ones from AMDs website. Then when it asks you, choose install the full version.
This is more of a serious issue I would love to help to solve. You can add my discord and we can hop into a call so I can attempt to help you in a more direct and understandable way. medicine_user
@@sundarpradeep193 then that simply means either you don’t have the correct settings for your monitor or your graphics card is so bad thay it dosent support freesync.
@@resonance32807 I remember setting fps 3 below refresh long time ago and it still gave me some tearing. I've heard from many people online that freesync + vsync is good.
If i turn Freesync Premium off on Display (new drivers cause browser lag if you have it open on desktop) and keep it "AMD Optimized" in game options, will it be automatically open in games and disabled when i go in display mode?
No, that’s not how it works. The way you phrased it is confusing, but in general freesync will always stay on. It should not cause any lag or stuttering however..
@@resonance32807 Thank you for the response! I mean, there are game settings for every game indivintually in Adrenalin app. So technicaly the Gaming>Display settings are different from the Gaming>Games settings. Gaming>Games settings is for every game only.
@@cyrexxx6307 oh I get what you mean now…so I have not ever touched INDIVIDUAL game settings in the adrenaline app so I’m not sure what AMD optimized does..but yeah it should disable if you are not playing the game. However I myself won’t recommend that since you never know if it’s 100% right unless ur monitor can display current refresh rates and plus it won’t hurt having freesync on all the time…even in there regular display mode.
@@resonance32807 when I have everything on low in fornite my game lags bad and when I have low settings or okay settings in dx12 it takes a long time for my game to load then usal
you can't claim this to be the most optimal settings when you don't undervolt your gpu, it makes a hugh difference to performance and efficiency, as does the powerlimit, it doesn't mean it will use more power, only if it needs, but you will use more power by raising the min freq since there is no need for it in reality, however since you play competitive games with high fps you are most likely CPU bound unless you play 4k resolution especially games like tarkov, squad, cs and all them, also you want resizable bar ON, not off, it does make a difference bro. enhanced sync is good when you got double the fps of your monitor's hz and you experience tearing or input lag, otherwise don't use it, it's made for people who run 120+ fps on 60hz monitor and that experience laaag, also free sync range depends on your monitor not whether you have premium or not. you can see the freesync range in adrenalin under display tab>display specs, range only goes as high as your monitor's hz.
I don’t undervolt my gpu because I simply do not need to, my processor is already struggling to catch up. Second, freesync does depend on its labeling. Premium allows for LFC, which many won’t use but it sets it aside from the other versions, thus changing its range of supported refresh rates.
@@resonance32807 yeah why would you want free performance at no cost. I didn't say there wasn't any difference between using free sync and free sync premium, i am saying free sync premium doesn't have a range, it's the monitor that determines the range of freesync/freesync premium. You can have a freesync premium monitor with 144 Hz, but it doesn't mean your freesync premium range is 100-300fps, it depends on the monitor and not the freesync edition.
You must be connected to your integrated graphics card….flip your computer around and make sure the HDMI or display port is plugged into the gpu slot, not the motherboard slot. The gpu slot should be below the motherboard panel.
im sorry if it sounds offensive but, ive u have an avg of fps of 250 in valorant, it couldnt be optimal settings :D i have the previous gpu model and my pc is now 3 years old. Im still getting on my 6700xt 400-500 fps. for fortnite nearly the same. also u should mention that anti lag only should be enabled if ur framerate drops a lot below ur monitors refresh rate or when ur running ur fps uncapped like me in cs2. Also disable free sync. it adds input lag and doesnt make a big difference with it off, just decreases a little bit of screen tearing so it's preference but not an performance boost. An essential note: never overclock ur fucking gpu. u can tune ur fans and raise ur power limit to max but do not overclock ur gpu. it just breaks ur gpu after time cause of the heat, nothing more. also it is useless to oc gpu for games like fortnite or valorant which are cpu intensive. just enable xmp + pbo, turn off useless bios settings, tweak ur windows and ur good to go.
Some corrections I might make: freesync makes a huge difference to mitigate for frame drops below your refresh rate, and the input delay is nearly none as tested in benchmarks. Now I run 250 fps because I cap it at 250 fps. The screen tearing is one thing, but the smoothness is what makes freesync so good. 180 fps on 240hz feels horrible compared to 180 fps on 240 hz with freesync.
This is inaccurate and not a good guide. Please learn who GPUs and CPUs interact and what individual settings actually do. If your fan is running at %80 or more, then there is a serious issue. It shouldn't be running above the high 50s - 60sfor a well optimized system. Also, timestamps.
First of all, my fan never runs above 80%. I think you are unfamiliar with the Adrenalin interface as I set my max speed to some value over 80%. This is not an accurate comment-please learn how fan speeds are actually presented. As for CPUs, this guide is for AMD gpus, not cpus, so you brought up something completely irrelevant.
Игры
I have problem that my resolution is stuck on 800x600 😢
Nice video
Wouldnt it be better to just install the drivers as Minimal Install if you dont plan to touch your gpu's setting (or if you know 100% of the time your gpu's fans are spinning)?
I wouldn’t, since there might be features in the future that would be great for your card
yep minimal and amernime driver is the best inputlag wise u can do 6900xt in my case more options always mean more inputlag.
yo love your vids i have a AMD Radeon Rx 6950 XT and my games would run nice until i get into like fights in game my fps drops a lot for no reason and only when i fight idk if you could help me with that. but keep up the good work
In what games? Try clearing shader cache in AMD
@@resonance32807 I have the same thing with Fortnite, don't know if they really patched anything from the last video you made but I'll get that stutter every now and then...on 1440p dx12, textures on epic but everything else low, I hit that 256 fps but I've seen it drop to 110 randomly
@@2crazy98 if ur ever gonna play dx12 keep everything on low. It gets rid of grass and grants mobile builds.
@@resonance32807 and what should i keep the anti aliasing? i have a 6950 and it’s so annoying that that i can’t make the game look good just to stop that random drop
you can undervolt for best temp and perf
Yeah but my gpu is already cool most of the time (max 60C) so I don’t bother for it. I’ve also undervolted in the past but no performance differences for me.
Anti lag works for me if I turn off adaptive sync
can i maybe get a updated tarkov settings video ?
hi, i just reinstalled the drivers and my fps is locked on 30 and whatever i try i cannt get more. i cannt play games smoothly it would be ok if it was 60 but 30 ....
i dont know what to do, there are no tutorials on yt with same problem that i have. could you pls help me
Make sure Radeon chill or any FPS limiter IS NOT ON. Common culprit is MSI afterburner plus Riva statistic tuner…uninstall any overclocking software and MSI after burner plus riva statistics
Why fps so bad in performance mode how to fix
Does it have a similar feature like nvidia ansel where you can do freecam and take in game pictures? I love to take screenshots but not all game has photo mode
Yes I believe so, go into hot keys and there should be like instant screenshot or smth like that
good video, here's what i might add.
- if you have an "OC" card, you basically dont need to touch the power tuning settings at all since they have their own overclock config in place. you don't really have a cpu bottleneck, 6800xt's run fine with even i5/r5s. I have a 6750xt red devil and theres basically no performance difference if i manually tune the gpu frequencies. But if you want to overclock, set the max to something 100-200mhz higher than native and set the minimum to a value that is 100mhz less. You can max out vram tuning but make sure to keep it on default and not fast timing.
- you may have done this already but to anyone who may read this, always make sure that you route 2 separate pcie cables to your gpu from psu if u own an rtx 3070 rx6700 and above, I didnt realise this for a while and when i did fix it, my fps in gpu bound games like cp2077 and rdr 2 went up by at least 10-15 fps.
- If you use freesync, make sure to use the FRTC in the amd control panel or RTSS to set the frame rate cap to 2 or 3 frames below your monitor's refresh rate, this ensure that there is no judders or screentear.
- a lot of the settings in the "advanced" section are for DX9 games only, so they basically arent even relevant.
- you specify to enable "center" in the as the gpu scaling mode, but you have gpu scaling disabled, so im pretty sure it does nothing in your case correct me if im wrong.
I do indeed hAve three separate pcie cables for my gpu and I don’t use any frame cap for freesync since I do run most games above 240 fps, so when the fps is above the refresh rate freesync does not kick in, I only prefer freesync to serve as a mitigation system for when I drop frames below 240. As for the center scaling mode, I explained in my last video because if one decides to use stretched res it will ensure that the resolution is display scaled, not gpu scaled which causes some marginable input lag. Thanks for the feedback! Glad to know I’m not too cpu bottlenecked
wouldnt games like valorant run at 400+ fps for you?
@@wakeupmrreiyn I cap at 260
when i change my tuning settings i keep crashing after i apply idk why.@@resonance32807
hey i have are question for games whre you want to see Enemies on long range like hell let loose in my case whats are the best settings for visibility?
Those cannot be changed in amd except for VSR, which is virtual super resolution. In hell let loose make sure to set your view distance to the highest and turn up that 3d resolution scale. The best thing you can do is to upgrade monitor resolution, preferably to 1440p. However super virtual resolution can upscale a 1080p monitor to produce a 1440p image virtually(so not perfect). Do this only if you have a powerful powerful gpu.
You do know freesync requires a freesync compatible monitor right? You should probably mention it either way.
Yeah I made an entire video on freesync so I didn’t want to say too much about it…but you are right I should’ve made that clear
I have problem. my rx 6700 xt turn off while gaming several minutes and monitor says no signal, there is no way to turn it on until I force restart the pc. any solution?
Check if it is fully seated in PCIE slot
Just trying to clear some things up here since it has been quite a controversial thing and i dont know what to do at this point, Why would you never want to use vsync with freesync? Coming from nvidia just got my rx7900xtx i am on a 165hz 1440p panel, with my 3090 I would enable vsync+gsync on the driver level with 162 fps frame cap and vsync off in game "frame cap below max fps of monitor would prevent vsync from kicking on which in turn would improve frame times and make gaming smooth" how is freesync any different when i do it in adrenaline like i did with my gsync setup it doesn't feel smooth and snappy like with nvidia
Because to my knowledge vsync is never a good thing to turn on for the sake of input latency…this vid was made for more competitive gamers in mind. The idea of combining vsync and freesync is not unheard of, however I feel like it is completely unnecessary because freesync is all u reallt need. Keep your fps at 162 and ur hertz will be at max 163-164. Vsync added driver level or not will only cause possible complications.
I cant open my adrenaline software. I tried uninstalling the CN folder, run ddu and reinstalling drivers but I still cant open. does anyone know how to fix this?
Go to task manager…end every task that has the amd red logo or anything related to Adrenaline….
Game become black screen with free sync turn on but appears after free sync turn off from amd adrenaline.. how to fix this problem ?? I need advantage of free sync turn on
Are you running dual monitors? If not, then go to windows, graphics, change advanced/defsult settings, enable variable refresh rate
One questions: why Radeon Enhanced Sync off? I've read that it's quite a good option
Enhanced sync for me at least only goes up to around 193 hz. It’s really odd as it dosent support 240 HZ, thays why I don’t use it. But if ur using like 60hz or 75hz it’ll be good.
@@resonance32807 okay so why would you not say that in the guide? you didn't do a very good job of explaining it, you brushed over it and just said, "don't use enhanced sync."
i've got a 75hz monitor, and i had to come to the comments to find out that it's good for me, but not for you when you could have taken 5 seconds extra to explain that in the video.
@@xilverknight155 enhanced sync is only optional, it’s not gonna be game changing in terms of input delay or smoothness. Free sync is much much more important and relevant.
@@xilverknight155 especially with the fact that it dosent work for me, that rules it out as universally optimal. The whole world isn’t centralized around you man…think about it
@@resonance32807 the average person is going to have a 60-75hz monitor. the average person coming to find these options and settings adjustments is probably going to benefit from it. even if it's something that doesn't work for you, you are making a guide where a ton of people could potentially benefit from that setting being turned on.
you verbatim said, "don't use enhanced sync"
why? why should we not? you took no time to explain it when you could have said, "enhanced sync milage may vary. with lower hz monitors, it is potentially beneficial, but with higher hz monitors you may not see much of a difference. try for yourself to see if it's right for you."
instead of "don't use it"
If telling someone they could potentially benefit from turning it on because they have a 60hz monitor isn't universal because not everyone has a 60hz monitor, that doesn't mean telling people not to use it because it doesn't work for YOU is. also, not everyone is gonna have a freesync monitor.
The whole world isn't centralized around you man...think about it.
is this the lowest latency settings??
i have rx6400 and i don't have more settings like you, can you explain me how do i get more like Record and Streaming. and gaming?
Install full version of drivers. Uninstall current one and reinstall new ones from AMDs website. Then when it asks you, choose install the full version.
@@resonance32807 mhm alr but how do i uninstall?
Would you ever upgrade to the 7000 series gpu in the future?
Don’t think so
My adrenaline edition isn’t opening just keeps saying not compatible with the current installed driver any way to resolve this ?
Please help
This is more of a serious issue I would love to help to solve. You can add my discord and we can hop into a call so I can attempt to help you in a more direct and understandable way. medicine_user
I have a freesync monitor but in amd control panel it shows not supported (23.10.2)but in the previous adrenalin version it shows on like (23.9.2, 3)
Because your monitor does not have it on. Toggle freesync ON on your monitor first.
@@resonance32807 no bro it turned on in monitor also
@@sundarpradeep193 then that simply means either you don’t have the correct settings for your monitor or your graphics card is so bad thay it dosent support freesync.
@@resonance32807 but my card Is sapphire pulse rx 6700xt and it's brand new
It supports free sync premium my monitor is Acer Nitro vg240ys it also supports freesync premium
Never use V-sync? Vsync works differently when you have Freesync monitor. Doesn't give much input lag and removes tearing.
But it still shouldn’t be used when using feesync
@@resonance32807 But if you don't use Vsync and FPS goes above refresh rate, there will be tearing? Like I do. :/
@@AdrianMuslim just set fps 3 below refresh rate so fps will never go above refresh rate?
@@resonance32807 I remember setting fps 3 below refresh long time ago and it still gave me some tearing. I've heard from many people online that freesync + vsync is good.
If i turn Freesync Premium off on Display (new drivers cause browser lag if you have it open on desktop) and keep it "AMD Optimized" in game options, will it be automatically open in games and disabled when i go in display mode?
No, that’s not how it works. The way you phrased it is confusing, but in general freesync will always stay on. It should not cause any lag or stuttering however..
@@resonance32807 Thank you for the response! I mean, there are game settings for every game indivintually in Adrenalin app. So technicaly the Gaming>Display settings are different from the Gaming>Games settings. Gaming>Games settings is for every game only.
@@cyrexxx6307 oh I get what you mean now…so I have not ever touched INDIVIDUAL game settings in the adrenaline app so I’m not sure what AMD optimized does..but yeah it should disable if you are not playing the game. However I myself won’t recommend that since you never know if it’s 100% right unless ur monitor can display current refresh rates and plus it won’t hurt having freesync on all the time…even in there regular display mode.
But I see what you mean about browser lag so I guess what you have set up SHOULD work. However don’t take my word on it
@@resonance32807 New update 23.10.1 fixed my problem! Freesync is fine now 👌👌
Which will be best driver for 6600xt for gaming
Most recent ones.
Assume I havent watched the other videos in this series... does half of what you say make any sense?
What makes you say that
@@resonance32807 3:15 Apparently, you've already explained why it's "centre"
I have a 6600 amd graphics card and ryzen 3 what do you recomned me for fornite settings and amd settings
Eveyrhting low try perf mode if not then use dx12. Follow amd settings in video
@@resonance32807 when I have everything on low in fornite my game lags bad and when I have low settings or okay settings in dx12 it takes a long time for my game to load then usal
@@resonance32807when I use dx when I try to get in a game it takes longer then usual and if I use all low settings on perf my games lags badly
Is the setting good if i have a rx7700xt with a 144hz monitor
Yes
Can this be Solid settings for a 7900xt i want to have the best performance at all time, but i cant find a vid for my gpu :(
Yes it will be
@@resonance32807 thanka boss 💪🏻
for games like dark souls, elden ring, what is the best min mhz?
Depends on your card. I would look up the SPECIFIC model and set it at its core clock
@@resonance32807 rx 6650xt xfx swft 210
what app do you use to cap fps?
In game settings
amd FreeSync is not available for me and idk why
Probably because your monitor does not have it
you can't claim this to be the most optimal settings when you don't undervolt your gpu, it makes a hugh difference to performance and efficiency, as does the powerlimit, it doesn't mean it will use more power, only if it needs, but you will use more power by raising the min freq since there is no need for it in reality, however since you play competitive games with high fps you are most likely CPU bound unless you play 4k resolution especially games like tarkov, squad, cs and all them, also you want resizable bar ON, not off, it does make a difference bro. enhanced sync is good when you got double the fps of your monitor's hz and you experience tearing or input lag, otherwise don't use it, it's made for people who run 120+ fps on 60hz monitor and that experience laaag, also free sync range depends on your monitor not whether you have premium or not. you can see the freesync range in adrenalin under display tab>display specs, range only goes as high as your monitor's hz.
I don’t undervolt my gpu because I simply do not need to, my processor is already struggling to catch up. Second, freesync does depend on its labeling. Premium allows for LFC, which many won’t use but it sets it aside from the other versions, thus changing its range of supported refresh rates.
@@resonance32807 yeah why would you want free performance at no cost. I didn't say there wasn't any difference between using free sync and free sync premium, i am saying free sync premium doesn't have a range, it's the monitor that determines the range of freesync/freesync premium. You can have a freesync premium monitor with 144 Hz, but it doesn't mean your freesync premium range is 100-300fps, it depends on the monitor and not the freesync edition.
@@resonance32807 That's not how it works lol. Undervolting gives better performance when done properly, freeing up CPU resources as well.
bro please help me i cant see the display option in the software in the latest version ..... plsss help meee brooo
You must be connected to your integrated graphics card….flip your computer around and make sure the HDMI or display port is plugged into the gpu slot, not the motherboard slot. The gpu slot should be below the motherboard panel.
Also go to gaming and there should be display.
@@resonance32807 thank you bro you earned a subscriber and also thanks again 😃
If you have freesync on you don’t need anti lag on
Does it matter if it is set to optimized?
im sorry if it sounds offensive but, ive u have an avg of fps of 250 in valorant, it couldnt be optimal settings :D i have the previous gpu model and my pc is now 3 years old. Im still getting on my 6700xt 400-500 fps. for fortnite nearly the same. also u should mention that anti lag only should be enabled if ur framerate drops a lot below ur monitors refresh rate or when ur running ur fps uncapped like me in cs2.
Also disable free sync. it adds input lag and doesnt make a big difference with it off, just decreases a little bit of screen tearing so it's preference but not an performance boost.
An essential note: never overclock ur fucking gpu. u can tune ur fans and raise ur power limit to max but do not overclock ur gpu. it just breaks ur gpu after time cause of the heat, nothing more. also it is useless to oc gpu for games like fortnite or valorant which are cpu intensive. just enable xmp + pbo, turn off useless bios settings, tweak ur windows and ur good to go.
Some corrections I might make: freesync makes a huge difference to mitigate for frame drops below your refresh rate, and the input delay is nearly none as tested in benchmarks. Now I run 250 fps because I cap it at 250 fps. The screen tearing is one thing, but the smoothness is what makes freesync so good. 180 fps on 240hz feels horrible compared to 180 fps on 240 hz with freesync.
@@resonance32807 agree! fps below 240hz is unplayable. feels like playing on a 90s monitor
@@resonance32807why do I get the same fps as on with my old PC help please.
@@techplayzthis what game?
idk if any watches ur shit, but i do and i salute u!
hi what is your cpu?
12700k
your mic is too high volume you need to lower u volume a little bit lol
Anti lag ADDS input lag if you are not GPU bottleneck (95-99% utilisation)
This is inaccurate and not a good guide. Please learn who GPUs and CPUs interact and what individual settings actually do. If your fan is running at %80 or more, then there is a serious issue. It shouldn't be running above the high 50s - 60sfor a well optimized system. Also, timestamps.
First of all, my fan never runs above 80%. I think you are unfamiliar with the Adrenalin interface as I set my max speed to some value over 80%. This is not an accurate comment-please learn how fan speeds are actually presented. As for CPUs, this guide is for AMD gpus, not cpus, so you brought up something completely irrelevant.
you are VERY quiet. And the video is very blurry.. why?
Sorry mic was messed up yday
Video should not be blurry….check ur quality settings on youtube
yep quiet and there is a hmmm @@resonance32807