Replacing front BRAKE PADS and ROTORS in Suzuki Grand Vitara 2005-2015

Поделиться
HTML-код
  • Опубликовано: 6 фев 2025
  • Replacing front Brake Pads and Rotors in Suzuki Grand Vitara 2005-2015
    How to Replace front Brake Pads and Rotors in Suzuki Grand Vitara
    Deals & my Gears on Amazon: www.amazon.com...
    Disclosure: As an Amazon Associate I earn from qualifying purchases
    Disclaimer: This video is for entertainment purpose only! NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician

Комментарии • 15

  • @NewRoad
    @NewRoad  5 лет назад +1

    Visit our Adventures Store: www.amazon.com/shop/hummansunson

  • @javatar1900
    @javatar1900 8 месяцев назад +3

    what size is the bolt to remove the rotor?

    • @NewRoad
      @NewRoad  8 месяцев назад

      If I remember correctly it was M8 X 1.25 bolt

  • @chrishopkinson3614
    @chrishopkinson3614 Год назад +1

    Never should push the piston back in with a screw driver. Can cause leak from rubber seal.
    When undoing caliper the brakes are not touching disc.
    I use a g clamp and old brake pad to push piston in flat then when reinstalled pump the brake a few times. Other then that good video

  • @achourbelmahdi1027
    @achourbelmahdi1027 6 месяцев назад

    Thank you verry much, you saved me👍👍👍👍

    • @NewRoad
      @NewRoad  6 месяцев назад

      Happy to help

  • @redshirt-scotty
    @redshirt-scotty 4 года назад +2

    what size are the seized rotor extraction bolts? probably 8mm but what is the thread pitch?

    • @cupcakesansfrontier
      @cupcakesansfrontier 3 года назад

      Yeah seriously. Dude doesn’t sweat the details for the home audience

    • @issiakalinimi8722
      @issiakalinimi8722 3 года назад

      Svp le disque de frein coût combien'

    • @paperg
      @paperg 2 года назад

      just had the same issue...obviously I don't have 23 different size bolts in my garage...so I stuck a flat head screwdriver in the rotor slots, used some oil penetrant to work its magic. and with some "love" from my mallet/hammer I got it to loosen up...and took out a little anger on that thing at the same time. saved a trip to the store.

  • @adriankjnn3890
    @adriankjnn3890 2 года назад

    hi pal, nice video,. i can see my has the same caliper (18E advics) but is it akebono or tokico? which size pads do i need i mean for this procedure? 138mm?

    • @NewRoad
      @NewRoad  2 года назад

      Go to rockauto.com and select your vehicle - it will give you all option that will fit your vehicle

  • @eugenekalashnikov9331
    @eugenekalashnikov9331 4 года назад

    Thank you

  • @joeryan2299
    @joeryan2299 3 года назад

    Didn’t show the reinstalling