REFINISHING Aluminum Wheels from Polished to Brushed Finish - LOOKS AMAZING!
HTML-код
- Опубликовано: 10 сен 2024
- POWERSTROKE STAGE TWO KITS HERE: bit.ly/stage_t...
POWERSTROKE STAGE ONE: bit.ly/STAGE_1
Refinishing my aluminum 24x14 wheels from polished to brushed! The process is actually very easy with the right tools.
GET YOUR POWERSTROKE PARTS HERE:
bit.ly/606whp
Follow my instagram:
bit.ly/COREYIN...
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
toyota
cars
JDM
Supra
2020 supra
mkv
a90
b58
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks
The inner hillbilly in me says put it up on jack stands, have your buddy hit the gas and use a scotch bright pad
Hell yeah
@@bwillusmc Dale yeah **
brushed on platinum looks good cause the truck already has brushed accents
This vid solidified my choice of getting brushed wheels for my black silverado:)
Where did you buy that sanding wheel for the grinder ??
Renegade has em. Bout 38 bucks a pop
You really need to clear coat or powdercoat over that. That completely raw aluminum will water spot and oxidize like no other, ask me how I know🤦🏻
I didn’t know you could sand/ polish a cast wheel
Looks great! This is what I need.
Exactly what I want to do to mine, I prefer a satin finish. Thanks!
Do you have a link for the buffing wheel you used
Wheels look sick love the brushed look on your truck
Thanks 👍
Great vid and good job on the wheels. Personally I prefer the polished look but what u did looks really good.
I think u did a damn nice job...now level up and wet sand that clear coat on the blk and u waving bro
Where to get that wheel brush?
How have they held up against oxidation etc? I’m thinking of doing mine but not sure if I can get away with maintaining them without applying some sort of clear coat
Thanks bro, this helped out a lot. Sweet platty btw👌🏾
That brush pope bro! 👌
What size tire and rim do you have I want the same size on mine and do you only have a leveling kit on it ?
+1 looking for the same info. Looks like maybe 10.5” tires on 10” rims?
What about using a clear coat to protect and finish it off?
Shoulda jacked it up put it in drive and held the scotch brite
Where did you buy the disc wheel at can't find any anywhere
Looks real good
What all products did you use? Also did you find a method that works for the inner spokes
Could I do this on brushed wheels to fix curb rash? There’s no videos anywhere about how to fix curb rash on a brushed wheel
Somebody answer this
That wouldn’t be abrasive enough to move metal you would definitely need to do sandpaper and maybe come back with a scotch brite or something like this to finish it off
Recently just sanded down my wheels, we’re chrome but switching to a brushed look
180, 220, 400, 600, 800, 1000, 1500, 2000, 3000 then 5000 for a super clean brush
@@Baggedbk1 by hand?
@@betodrk I took my wheels apart since they were three piece and used a sander but you can do it by hand, just have to find the right videos
I dig the look big time
Hi there, I want to have a brushed look on my Work VS-XX's reverse lip, will it work? or will it cause rust?
What is that wheel called?
What size wheels and tires?
You did that nice 👍
Is there a way to go from brushed to polished?
My back right wheel did this same thing with these wheels
What was the wheel called. Where can I buy one?
Yeha I figured he would put it in the comments. I want to know as well.
Looks a lot better🤙🇺🇸
Have you thought about brushing the rear applique? I have a F350 limited. I Like the paint matched bumpers. I like the brushed door handles. I hate the look of the applique.
Hello, where did you get the spike lug nuts for the rims? Thanks Louis
what size are your wheels
They make polishers on a frame with wheels. Depending on intent you can make one similar or buy into one.
A little bit of wd-40 helps hold your grit and gives a finer finish 🫶🏻
Did you clear coat them?
Can u make brushed a mirror finish
I have the same wheels but 1 wheel has a curb rash will sanding it down help?
yeah depends on how deep. Do a quick search on RUclips on repairing curb rash 👍
What size it the lip of the wheel??
what brand of wheels?
Purple Power will work also ......
Hey buddy, been wanting to run spe tunes but I read a review about having hard shifts from 4th to 5th and spe isn't correcting the issue or answering the customer ?
The shift are a little more firm in the higher gears due to less clutch packs. No harm to trans, gears locking in how they could be. I’m extremely happy with my SPE tunes.
@@Dieselnm101 great! I have some more questions lol, in stage 1 and 2 does it smoke? Also hows the drone? Lastly what year powerstroke r u running?
ACanela85 my trucks a 2012. I do smoke, only on heavy throttle once in higher RPM it clean 🧼. It’s mostly due to stock gears 3.53 with 38’s. Once I regear it’ll be much cleaner. I’m running 5 inch full straight pipe, surprisingly I don’t notice any drone, again my 38’s Toyo M/T could be muffling the drone.
@@Dieselnm101 nice, I have 15 and will soon hopefully run mt as well. But 37's
@dieselnm101 for the win 💪 but yeah if you are experiencing hard shifts then perform the trans relearn prodecure. theres a few steps ill paste it in here
The 6R140 automatic transmission on the 2011 - 2018 6.7L Powerstroke has what is called Adaptive Memory and is constantly learning and adapting to different horsepower levels, temperatures, driving habits, etc. If you selected to tune the transmission during the Install Download process, the Transmission Adaptive Memory is automatically reset when the download completes. We highly recommend performing a Transmission Relearn procedure after installing transmission tuning to help the transmission perform correctly with the added horsepower.
The 6R140 automatic transmission will eventually learn over time on its own, but the relearn procedure gives a good baseline for the adaptive learning and helps to speed up the learning process. To perform the relearn procedure, please follow these instructions:
After tuning is installed, perform each of the following 0-80 MPH runs while in the HOT power level. During this relearn process, you may experience hesitation during shifts, hard shifts, or defuel patterns, all of which are normal:
0-80 MPH @ 25% throttle position, then slow down and come to a complete stop.
0-80 MPH @ 50% throttle position, then slow down and come to a complete stop.
0-80 MPH @ 100% throttle position, then slow down and come to a complete stop.
The Transmission Relearn procedure is complete.
Use a dreamed tool, with a fine barrel sand paper for your spokes, my dremmel has a variable speed setting, and after you finish them buy a tub of where wax from chemical guys to protect them, or hit me up if you wanna try some of mine first, im pretty close to you...
good call darren!
Have someone spin the wheel for you..
Why would you do that to a truck???
Wait.. you went from polished wheels to brushed buy using this wheel brush?
yes its like a red scotch-brite pad wheel, works nice!
Do they require same maintenance care? Being in the oilfield my AF are f*Ed. Stained from the mud. I got them ceramic coated, but it didn't do anything.
Biggest question i have is how do you have 24x14 summit cali offroad wheels? I called a dealer and they dont even make them
🤷♂️
Tell me pleaseee @topcorey
Yes they do? In polished and brushed from multiple places. Google is an amazing new thing..
Ceramic coat it to protect it?
I'd love to know myself....I have a lot of beautiful brushed aluminum on my motorcycles, They are only 2 years old and only ridden in good weather. However, I live next to the ocean and the salt air destroys everything. I've been wiping down the bike with Turtle Wx ceramic and none of the raw aluminum has changed or oxidized. Maybe it is the turtle wax.
Whyyy😭
How do you like the amp tires?
This guy never efin responds!
full honestly i love them, i know they are a cheaper mud tire but they ride great and have been wearing awesome. I havent even rotated them yet!
I know your right and im working on that ✌
ACanela85 he has responded! Lol. And that’s good to hear Corey!
Aye man it would look sick if you powder coat the small cutouts in the spokes with the rest polished
I guess I’m old school. This makes no sense to me. Looks like someone screwed up the finish and hit it with scotchbrite to cover it up. Buy chrome and wipe them off once a week. Easy.
Chrome way better
only a ford driver would buy polished wheels and microscratch them intentionally
😂😂
Solution: Don't buy bare aluminum forged wheels.
But they aren’t forged wheels
@@dirtymacmotorsports Well....bare aluminum.
They were chrome plated not just bare, forged wheels are polished bare aluminum, cast wheels like these either are powdercoated or chrome plated of some sort 👍🏻
Blake McGourty not all the time. These specific Cali Summits are a raw aluminum, no chrome plating. Just like forces you have to polish these to get that “chrome” finish.
Wheels are to wide for the tires. ford lovers are jokes.
Says Miata driver. 😂 man fuck off with your childish bs.