Those tubs are so clean. You guys crushed it. No pun intended. It was nice to have Andrew, Joe Nate, and Pappa T. lending a hand. I can't wait til you finish this car. Loving the content. I really liked the Lightning wheel video too.
@@BREW2LFOXBODY Any time. We have probably a good 6 inches of snow here on the ground in Little Rock, Arkansas. About to take our Great Pyr out to play in it. She's a 120 lbs small horse. LOL.
@@BREW2LFOXBODY As always I’m taking notes , I sold my 67 coupe a while back and a few months ago I came across a 66 one owner coupe so I’m watching very close at what you’re doing lol …. Im finishing a build for a friend of mine but once I get busy with the 66 I’m going to try to to a build series ..
I love all your work you are a really smart guy and I explain what your doin better then any other video I watch...keep the videos coming I'm learning a thing or 2 from u....your foin great...i love your foxbodys I'm building 1 now a 89 5.0 5 speed...
Did you have to move the leaf springs inboard to gain clearance for the tire?? If so what kit did you use or how did you move them inboard?? That would be your next limitation I would imagine
You got bigger balls then me... I would be a nervous wreck cutting into a 65 fastback! That baby is going to amazing! I kinda like the idea of matching Calypso Mustangs how bad aS$ would that be to see both next to each other one 65 one 89?. . .. WOW!
Have u or will u do a top transmission for foxbodys ? I'm undecided on what transmission to get .. tremec tko 600 was my first thought but heard bad reviews lately..
Why didn't u sand plast that car before u started working on it..when u sand plast a vehicle it stops the rust and shows u eat your working with??? I just dnt no why u didnt the cars stripped....just asking ..lol
Glad you liked the mini tubs I designed. You can with the correct backspacing get a 295 to fit 👍
Nice job on the tubs. Going be a sweet ride.
That fastbacks going to be epic!
🙌🔥🔥👀
I love how this car is coming together
Those tubs are so clean. You guys crushed it. No pun intended. It was nice to have Andrew, Joe Nate, and Pappa T. lending a hand. I can't wait til you finish this car. Loving the content. I really liked the Lightning wheel video too.
Thanks bro, yeah it was great having everyone over getting involved in the build. That’s what it’s all about
@@BREW2LFOXBODY Any time. We have probably a good 6 inches of snow here on the ground in Little Rock, Arkansas. About to take our Great Pyr out to play in it. She's a 120 lbs small horse. LOL.
@@BREW2LFOXBODY As always I’m taking notes , I sold my 67 coupe a while back and a few months ago I came across a 66 one owner coupe so I’m watching very close at what you’re doing lol ….
Im finishing a build for a friend of mine but once I get busy with the 66 I’m going to try to to a build series ..
@@BREW2LFOXBODY btw you should go Holley sniper on it …
That’s a clean look
A nice big tire to handle the 363 you drop in. Lol! Looks fantastic! The fit is spot on! Ool stuff as always
Fastbacks are absolutely the best.!! Excited to follow this build.
Looking good !! After watching you almost from the beginning, you can tell you know what you are doing 👍🏻👍🏻
I’m still learning, pushing myself everyday to learn more
@@BREW2LFOXBODY Your doing a good job 👍🏻 and one thing that stands out in your video’s is that it’s a family get together to get it done ✅
Measure twice, cut once. Hell yeah, just mini tubbed mine.
Moving along nicely, looks great so far! Those tubs will be just right, not too big, but big enough to get some meats under it!
Nice project Brew2l!
Hell yeah man. That mini tub is a great idea! That's gonna look so good👍. The car is really coming along nicely!
awesome work man, love the shop setup functional, clean and organized.
I appreciate that
Nice man! I wasn’t expecting mini tubs, but I like it. I like it a lot! Looks great!
Good to see pops over there Helping out ! he seems like he knows his way around a body shop pretty well !
We definitely had some fun! He loves doing stuff like that for sure.
Yea most tubs I have done have been big ones and you end up notching into the frame in the back looks great buddy !!!
Thanks brother
That is so relaxing working on your car some people don't get that! Stay safe and happy!
Thanks Maurice! I’ve enjoyed this build more than I thought 😎
Looking great. Only one way to learn is doing it yourself I always say lol. Keep those great videos coming. They been VERY HELPFUL. THANK YOU
Hell yeah bro. Coming right along with it.
Tubs look awesome. I used the Raptor Liner on my Foxbody. It was really easy to use and I was happy with the end results.
Great video. was looking for a short and sweet this is it video of mini tubs. Thank you
awesome work man .....pretty cool seeing this come together!
That's going to look awesome
It’s fun watching this one come together. I just bought a 70 Torino. I’m doing something similar to mine.
Great to hear Andrew is helping! How low is your grocery supply running? 😁
I had to send Aubrey to the store yesterday to re-up after Andrew left 🥲
Cant wait to see that LS go in it😬
We don’t kiss boys over here 👈 😂
I WANNA see every piece of it haha. Keep it up. Super cool
Those are pretty much same tubs i put in my 87 coupe. Keep up the great work.
Hey Brew2l where can I buy LED lights for my fox interior and underneath the hood? Can’t find them anywhere!
Man it's looking like it's coming together great. Keep grinding. Can't wait to see it done
Love it! I have some from MTF for my 65 sitting in my garage!
Looking good bubba, are you gona restore the rear panels like on the foxes?
Yes sir 👌
Lookn clean!!👀
I love all your work you are a really smart guy and I explain what your doin better then any other video I watch...keep the videos coming I'm learning a thing or 2 from u....your foin great...i love your foxbodys I'm building 1 now a 89 5.0 5 speed...
Things are coming along great. I bet that car would be sick as a black on black fast back. Either way it’s gonna be a looker. God bless.💪🏼🇺🇸
Good stuff! I will bookshelf this for a future build!
Those fit nice! Good job man!
Looking awesome 👌
Really like the mini tubs, will look great with some wider meats on the back.
Looks good. Making progress. I finally got the core support in on my car. That was a task 😂🤣
Nice! Yeah I’m about tired of fabricating shit already 🤦♂️😂
@@BREW2LFOXBODY I understand that it dirty work.. someones gotta do it.. lol 😆
Keeping the dream alive!
I just got a deal I couldn't pass up on one of these 65 fastback man love the look of this old horse 💪🔧🐎🚗🇺🇲🔥
Did you have to move the leaf springs inboard to gain clearance for the tire?? If so what kit did you use or how did you move them inboard?? That would be your next limitation I would imagine
Lovin' the '65 build content. I can't wait to see what engine gets dropped into it.
You got bigger balls then me... I would be a nervous wreck cutting into a 65 fastback! That baby is going to amazing! I kinda like the idea of matching Calypso Mustangs how bad aS$ would that be to see both next to each other one 65 one 89?. . .. WOW!
I was definitely a little nervous I can’t lie 👀😂
Love to see this content!
285/40/18 on rear of my 01 gt with fenders rolled. Still rubs when flexed hard pulling on my street. Not bad but it looks amazing.
Nicw work man
I’m torn on what I want to do to my fox next winter new motor or mini tubs/rear coil overs... I honestly need more money lol
Love your work! Just about to tub my 65 mustang fastback, what place did you get your tubs from? I'm from Western Australia
Show cars are not as much fun. Glad you guys are building it to enjoy it!
Exactly brother 👈💯
Looks good !
Looks great
Have u or will u do a top transmission for foxbodys ? I'm undecided on what transmission to get .. tremec tko 600 was my first thought but heard bad reviews lately..
I just might shoot that video soon 👌
AWSOME 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍fantastic
All muscle cars should have big fat tires on the back..good job 👍
Exactly! Thanks
i was the first to suggest this!!! now you can put some meats on there!! nice!!
Thats a cool hat
Thanks for letting me use it 🙌
Hahaha
Do you ever take a day off? Thanks for all the hard work on video.
Not many.. my brain won’t shut off so I figure I might as well do something with it. Lol
What did you do with the whole trap door framework? You cut it out?
so are you keeping the rear suspension?
Who was the kid wearing that funky hat? Great job
Looks good, are you going to be cutting down the reared. Just wondering.
No, probably going with a 8.8 out of a fox
Oh ok I was just wondering, but the 8.8 makes sense.
What wheel tub kit is this ?
“Mustangs To Fear” is the brand
275 on a 10in!!! Do they make a 10in mag 500???🤔🤔🤔
Yes sir! 👌
Man that would look good!!! A 7 or 8 on front 10 in the back with low stance!!!!!💪💪💪💪💪
That’s the plan 👌
With a mini tub can you still use the factory back seat or does it have to be modified for use ?
You can still use every bit of your original interior
Fat tires on the back FTW.!!!
Why didn't u sand plast that car before u started working on it..when u sand plast a vehicle it stops the rust and shows u eat your working with??? I just dnt no why u didnt the cars stripped....just asking ..lol
First!
💪✊