After years of jerking around modding mics, i fianally came to my senses and bought a used rode nt1. Paid 100 bucks for it, and have never looked back!!!
i owned a c10 about 15 years ago. it was fine on its own, but i wasn't expecting it to be a U87 clone. but it's nice that the mod you did makes it come close. i ended up selling it and getting a c-414 instead. maybe i'll look around for one that already has the mod. that's way above my pay grade as far as diy work goes.
I just did a build of a line level to mic level board that someone had online, and it worked great, but with this removal of parts business I fear I may end up losing my arse doing this one, so I can't risk it.
It is tricky. It's not to hard if you have a desoldering pump. and any damage to the board can be repaired in a couple of ways. I've messed a board up before. not too hard to fix!
I picked a SP C1 up for £50 about five years ago, with the intention of doing the Mic Parts mod (except I had some NOS Wima TFF Gold to stick in). I opened it up and the mod had already been done, just a case of swapping out the caps). Bargain! Great mic, that I've recorded many vocal/acoustic guitar takes on.
I Though Studio Projects is division of the PMI Audio Group. I have a B1, C1 and C3 models from Studio Projects an love then BUT, they are an America Company
I made one T12 and one T47, the S87 and the C1 mod.. They all get their use in my studio. Love how easy the builds are and how detailed the instructions. The T series has a transformer which gives a bit of harmonic distortion, very musical. :)
It isn't a clone of a U87, though. I've had this mic for 10+ years, and the mod indeed helps to mimic the U87's on-axis frequency response better. But creating a frequency chart is not "using the mic" for anything but taking a reading and printing the result. It has nothing to do with how the mic behaves in session use. A U87 is transformer-based w/ multiple pickup patterns. The circuit is something else, and everything about the case and build is different - even the grill is specific to Neumann for how it filters harmonics. Only the K67 capsule was _attempted_ to be cloned for the C1 - and they _still_ subbed a plastic backplate instead of using brass. It's nowhere near a clone; people called it such because they had little else to go on and it was a new segment opening up at the time. It's a good mic, but it is what it is.
@@diyrecordingstudio Yes, I’m in Australia also and as Ben Sutcliffe mentioned previously the owner is in Au but working from Asia. 3U Audio is very popular on Gear Space. 👌
I'll have a video comparison soon of this vs the real thing. You might be shocked how close it actually is. I've tested it in my classes. The only difference in the off axis rejection is much better on the real thing, apart from that, so, so close!
Yeah the C1 clone mod results in a really nice sounding mic. I have a comparison video with a real Neumann u87 coming soon. I have already done some testing and it is very close. Surprisingly.
Yes definitely. If you want that u87 vibe that high quality pro streamers have then yes! This mic comes with its own shock mount. If you find a C1 it should have a shock mount with it.
So did this Mic come stock with the Wimas? Man, I would have just spent another 30-40 bucks, and upgraded all the components while I was at it, or at least the coupling caps at the very least.
Yeah I could have done that for sure. The only problem is I’m trying to show what this specific upgrade kit does though. So any further upgrades or adjustments might change the results. Would be good to hear what else could be done to push the quality further though.
@@diyrecordingstudio Ohhh right, ya that makes sense for sure. Thanks for the reply! So, I guess thinking about it now, I guess it does come with Wima's stock which is cool to see actually. Do you find yourself actually reaching for this mic much or?
Interesting take. It’s actually a complete re-voicing of the circuit you can see the mods I made here DIY a $300 Neumann U87 "Clone" - Studio Projects C1 u87 Mod ruclips.net/video/kvdpmzrduq4/видео.html
After years of jerking around modding mics, i fianally came to my senses and bought a used rode nt1. Paid 100 bucks for it, and have never looked back!!!
I like it that you don't sugar coat and PG grade your script! subscribed
Great vid .. finally a new one
Thanks. Yeah more build vids on the way too!
I modded a Behringer B1 without buying a kit. Still waiting to buy an original one so I can make a video comparison.
i owned a c10 about 15 years ago. it was fine on its own, but i wasn't expecting it to be a U87 clone. but it's nice that the mod you did makes it come close.
i ended up selling it and getting a c-414 instead. maybe i'll look around for one that already has the mod.
that's way above my pay grade as far as diy work goes.
Cant wait to hear the comparison with the u87. Definitely would buy this microphone if it sounds great.
I'll have that video coming really soon. It takes a while to get all the parts recorded for a shootout and keep everything scientific as possible.
@@diyrecordingstudio
Yes definitely sir, keep making those great videos. I keep learning a lot from you.
It does sound great. I've had one for many many years, and don't usually reach for any other mic for my voice.
I did do this Upgrade and its a very very Clean Mic..
Yeah it’s definitely a mic I am going to use more regularly since doing the upgrade
I just did a build of a line level to mic level board that someone had online, and it worked great, but with this removal of parts business I fear I may end up losing my arse doing this one, so I can't risk it.
It is tricky. It's not to hard if you have a desoldering pump. and any damage to the board can be repaired in a couple of ways. I've messed a board up before. not too hard to fix!
I picked a SP C1 up for £50 about five years ago, with the intention of doing the Mic Parts mod (except I had some NOS Wima TFF Gold to stick in). I opened it up and the mod had already been done, just a case of swapping out the caps). Bargain! Great mic, that I've recorded many vocal/acoustic guitar takes on.
Oh man, so lucky!
Studio Projects Audio is swedish brand from a town called Alingsås outside Gothenburg.
I Though Studio Projects is division of the PMI Audio Group. I have a B1, C1 and C3 models from Studio Projects an love then BUT, they are an America Company
I did the Studio Project C1 mod and also bought the S87 kit. I like the S87 better.. (worth the price difference) ;)
I was looking at those. I’ve built the s12 already, and have a pair. I’m pretty set on letting the t67 next I think.
I made one T12 and one T47, the S87 and the C1 mod.. They all get their use in my studio. Love how easy the builds are and how detailed the instructions. The T series has a transformer which gives a bit of harmonic distortion, very musical. :)
Yeah theyre great products for sure. I'm very keen to hear the T67 for sure. Might be a couple of months before I take a swing at it though.
It isn't a clone of a U87, though.
I've had this mic for 10+ years, and the mod indeed helps to mimic the U87's on-axis frequency response better.
But creating a frequency chart is not "using the mic" for anything but taking a reading and printing the result. It has nothing to do with how the mic behaves in session use.
A U87 is transformer-based w/ multiple pickup patterns. The circuit is something else, and everything about the case and build is different - even the grill is specific to Neumann for how it filters harmonics.
Only the K67 capsule was _attempted_ to be cloned for the C1 - and they _still_ subbed a plastic backplate instead of using brass.
It's nowhere near a clone; people called it such because they had little else to go on and it was a new segment opening up at the time. It's a good mic, but it is what it is.
Tell us you own a u87 without telling us 🤣
Yes there are many clones, i’ve tried the 3U Audio MK1D and it’s multi pattern under $600Au . It’s reminiscent & unique of the 87.
Yeah wow, it looks legit. I wasnt familiar with that company at all, theyre australian!
Are you from Oz too?
3U are fantastic. Owned by an Australian but the factory is in China. They make the capsules for other companies, including Warm Audio
@@diyrecordingstudio Yes, I’m in Australia also and as Ben Sutcliffe mentioned previously the owner is in Au but working from Asia. 3U Audio is very popular on Gear Space. 👌
Can you do a DIY video of the next mic too? I have fear to do something like this but i could follow along with a video i reckon.
Like a step by step instructional video?
yeah I was about to ask for the same thing as you just mentioned@@diyrecordingstudio
@@diyrecordingstudio yeah please man that would be amazing.
I definitely will do a build video very soon.
@@diyrecordingstudio looking forward to it man. Thanks again.
I’ve done a few similar mods to the akg 100 n they turned out pretty great
Oh that's awesome, did you use any particular kit or 100% DIY it?
no but i bought I sourced out capsules and capacitors and did my own mods that got me the tonal sound i was looking for@@diyrecordingstudio
Very cool, also very clever to do that on your own.
Very cool ❤
Cheers man. Congrats on the neve! That’s so awesome. You’ll have to get em to send you a real Neumann u87 next 😂
Nice review !!
The mic doesn't sound like a U87 but it sounds good LOL.👍
I'll have a video comparison soon of this vs the real thing. You might be shocked how close it actually is. I've tested it in my classes. The only difference in the off axis rejection is much better on the real thing, apart from that, so, so close!
@@diyrecordingstudio That's awesome man. What about the presence and the sibilance?
Temu ad is crazy lol
I wrote that b4 the end... lol its the mic.. wow, its close!
Yeah the C1 clone mod results in a really nice sounding mic. I have a comparison video with a real Neumann u87 coming soon. I have already done some testing and it is very close. Surprisingly.
@@diyrecordingstudio I can't find the direct comparison video. Did it post?
Would you recommend this microphone for livestreaming and what boom arm and shock mount would you use for it?
Yes definitely. If you want that u87 vibe that high quality pro streamers have then yes!
This mic comes with its own shock mount. If you find a C1 it should have a shock mount with it.
So did this Mic come stock with the Wimas? Man, I would have just spent another 30-40 bucks, and upgraded all the components while I was at it, or at least the coupling caps at the very least.
Yeah I could have done that for sure. The only problem is I’m trying to show what this specific upgrade kit does though. So any further upgrades or adjustments might change the results.
Would be good to hear what else could be done to push the quality further though.
@@diyrecordingstudio Ohhh right, ya that makes sense for sure. Thanks for the reply! So, I guess thinking about it now, I guess it does come with Wima's stock which is cool to see actually. Do you find yourself actually reaching for this mic much or?
Yup. Love it for vocals, punk rock gtrs, drums, snare bottom, kick out, overheads. Work horse kinda mic.
@@diyrecordingstudio Sick man! Thanks!
Is it better than the behringer C1 mic ?
yeah i would say so especially once it's had the mod!
the modded one is just more compressed
Interesting take. It’s actually a complete re-voicing of the circuit you can see the mods I made here
DIY a $300 Neumann U87 "Clone" - Studio Projects C1 u87 Mod
ruclips.net/video/kvdpmzrduq4/видео.html
haha i love you
Hahah you too man
Uh, the boxy mid range on most RUclips video speaking and stuff is extremely irritating to me. Lol 😅 bright and clean is great, let the mic breathe
It's harsh and shrill or is it me
Real cms have boxy mid range. This helps in recording clean songs.
Will it work with a Studio Projects B1?
Unfortunately I dont think so. microphone-parts.com/pages/studio-projects-b1-mods
Apart from a capsule change, mic part do not have one.
Mic doest sound like U 87. GTZ U 87 sounds close to Naumann U 87.
the link doesn't work... :(
What link are you referring to there?
You bashed Caleb Pike?
What mic are you talking on here. i like sound of it!
Hey it's the studio projects C1 mic. Theyre discontinued but you can find em 2nd hand online!
Cant beat the slate vms. Catch em on sale for 500