Ok best way to ask me any questions is to email me @ backyardbuilttrucks1@gmail.com , I will be posting a video this week showing all the part numbers for the headers , steering shaft , control arms and so on. thanks so much .
i am doin same on a 92 s10 with a 468bbc , ima try and use fender well headers for a 57 chevy as i will not be runn wheel tubs , i think theyll fit wats ur opinion
Nice double jointed finger there!! ha ha ha OK, but where do we find these headers? I mean, who is selling them, and what are these called? You said we need to buy two sets, I'm assuming one set is for some other vehicle, and the other set a different vehicle? Just "buy headers off of eBay" isn't helping me. Thanks. Thanks for this video, there is some good info in here!
@@backyardbuilttrucks1 what year Chevelle works the best do you know? Are familiar with airbox door Holley offers is it enough for BBC even though designed for SBC
This is the only video that actually has good information all of the other S10 454 vids are just guys starting and reving the engine who gives a shit the 454 sounds the same in in a full size truck as in and S-10 those videos are worthless yours is really good I'm getting ready to do a 427 S-10 swap I think I'm just gona go with fender well headers
Myvintageiron7512 thank you, i wanted to show it can be done without hacking up the truck to fit engine in the truck. and on the cheaper side of things. i would recommend using a 1994 and up chassis as they had a narrower engine crossmember and boxed back to rear spring mounts. my truck has a 1998 chassis under it. i am building a new set of over the frame headers now for this truck as it is getting a blueprint engines 540 over the winter. my son is taking the 496 for his truck.
Kaylie Keller here is steering shaft I use off amazon. APDTY 105841 Steering Column Lower Intermediate Shaft Assembly Complete With Both Universal U-Joints Fits 1984-1994 Jeep Cherokee w/Power Steering (Replaces Mopar 4713943)
drivers side header set New Quantity10 available Almost gone BrandRacing Innovation and Supply WarrantyYes Manufacturer Part NumberRIS.10054 Item Number161945020324 CategoryExhaust Manifolds & Headers in eBay Motors
Love the s 10 can u email me I want to do the same thing pben831@gmail.com thank you
Yes I can
Just went back thru to find you email . Sorry.
Backyard-Built-Trucks it’s ok
Excellent video bro! One of the most informative videos I have ever seen. thank you for taking the time and making the effort!
I'm thinking about doing this in a 91 blazer, your video might have made my mind up on pulling the trigger
What type of headers are they for what years on both sides ?
Great job and great information I bet the s10 is very fast 496 cool build✔What are the cylinder heads??
Head on this engine are 820 castings
Do you have the part number for the passenger side?
Good video. Thank you
Ok best way to ask me any questions is to email me @ backyardbuilttrucks1@gmail.com , I will be posting a video this week showing all the part numbers for the headers , steering shaft , control arms and so on. thanks so much .
For the control arms do I go with both right or both left or a right In a left
Joahua Farve
use 2 left side arms , flip one over for right side .
manual if on street , use a high flow . electric is good at track cause you can let it run between races
i am doin same on a 92 s10 with a 468bbc , ima try and use fender well headers for a 57 chevy as i will not be runn wheel tubs , i think theyll fit wats ur opinion
wats ur opition on water pumps electric or manual
What year model jeep steering shaft do you need
I love your video Could you Please give me the part number to the Drivers side Header
Okay sounds good
Nice double jointed finger there!! ha ha ha
OK, but where do we find these headers? I mean, who is selling them, and what are these called? You said we need to buy two sets, I'm assuming one set is for some other vehicle, and the other set a different vehicle? Just "buy headers off of eBay" isn't helping me. Thanks.
Thanks for this video, there is some good info in here!
Do you have enough room in the frame to run stock manifolds
Tracy Pettibon
Yes chevelle manifolds work best
Would there still be clearance issues with steering shaft
Can you give me the part number for the driver side header
I have a 98 s10 blazer with all s10 4x4 supposition and and 10 inch lift and I'm about to put a 454 BBC in it oh ya I do have a 8 inch body lift also
Can I get part #'s for both sides headers?
can a person use cast iron manifolds? what are they out of you know? Is it required to remove blower box completely?
Chevelle manifolds works best and yes heater box needs removed or modified to clear cylinder head.
@@backyardbuilttrucks1 what year Chevelle works the best do you know? Are familiar with airbox door Holley offers is it enough for BBC even though designed for SBC
@@teal61762
We have used 68 to 72 manifolds where driver exits in front of oil filter straight down and passenger exit and a angle back and down .
@@backyardbuilttrucks1 TY
Might s well. These evaders so perform any better than stock manifolds
This is the only video that actually has good information all of the other S10 454 vids are just guys starting and reving the engine who gives a shit the 454 sounds the same in in a full size truck as in and S-10 those videos are worthless yours is really good I'm getting ready to do a 427 S-10 swap I think I'm just gona go with fender well headers
Myvintageiron7512
thank you, i wanted to show it can be done without hacking up the truck to fit engine in the truck. and on the cheaper side of things. i would recommend using a 1994 and up chassis as they had a narrower engine crossmember and boxed back to rear spring mounts. my truck has a 1998 chassis under it. i am building a new set of over the frame headers now for this truck as it is getting a blueprint engines 540 over the winter. my son is taking the 496 for his truck.
What size tubes are those headers
Camaro Rick
1-7/8 primaries
racing innovations , Olathe ks. is where I got my headers from
What kind of steering did you use
Kaylie Keller
manual s10 box and a steering shaft from a jeep Cherokee with u-joints on each end 3/4 30 spline at gear box 1 inch double D at firewall
Ok
Kaylie Keller
here is steering shaft I use off amazon.
APDTY 105841 Steering Column Lower Intermediate Shaft Assembly Complete With Both Universal U-Joints Fits 1984-1994 Jeep Cherokee w/Power Steering (Replaces Mopar 4713943)
not forgot about calling you , just been busy
This video you have is a life saver bud thanks for all the help
Whats the part number on driver side buddy
Joahua Farve
part # 91031134-L
What would I search for to get the headers thank you
Did you listen to the video? This is why uploaders hate to review and respond to comments bc of these type questions.
I got it thanks
Hay can u help me with part numbers on headers please
I'm trying to figure this out I just order on side of headers don't no what to get for the other if I dint answer leave a voice man thanks
Box the frame or it will twist like a mf, bust out the windshield, & DESTROY the entire, truck. Inside & out, i promise.
Steering box,
drivers side header set
New
Quantity10 available
Almost gone
BrandRacing Innovation and Supply
WarrantyYes
Manufacturer Part NumberRIS.10054
Item Number161945020324
CategoryExhaust Manifolds & Headers
in eBay Motors
Bb