Out of 10's video on the ytube, only video with the guys providing some protection to interior and rear seat. Kudos. Otherwise, just dripping soapy water all over the seats and even on the speakers, without any care!
knightgangsta Johnson and Johnson. lol. any baby powder will work but its always messy, other methods to dry shrink that work jus the same if not better.
great video ! looks very difficult. i think your video is reference until i saw 10:14. that looks way more difficult than the roll together method from artisticwd here on youtube. other than that, i like your technique better.
Totally cool - The tint looked far from flat yet it installed great. I've been trying to shrink on a curved rear window on a big Ford Crown Vic and have been making the mistake of trying to get it perfectly flat.
Susan Vue I was thinking the same thing, bet some fingers crept up after the video stop rec. Lol. even though those are pretty flat windows I would always hard card the film flat. like to see him do that on Saturn or jaguar rear. 😂😂😂
there was alot of things, can't really say wrong cause obviously the install worked but way better ways to dry shrink and this guy did and didn't do things that should be taught. I've worked many times with sun gaurd films, it's not bad film but can be quirky when shrinking if your not paying attention. good video but like i said definitely things that should have been taught that are good knowledge and can make things easier, but all in all good install and good vid.
Hi Talisman. Can you please fill out this form? It will help me identify the correct person here at Madico that will be able to get you pricing information. Thank you. madico.com/contact
hi sir i am from india wen i was tinting the film there is a lot off air babools coming wat will i do please tel me and i need by those tools wer did i wii get it
You want that on high .. the hottest setting u got ... I use the Milwaukee digital heat gun I think it was 300$ been a few years since i had it .. I only use Milwaukee guns because the heat is consistent all others I have used suck they are not consistent at all ... Buy a good gun you will see the difference ... I also shrink using a torch with mapgas .. can shrink a back window in 2 minutes lol... any way hope this helps ....
At least this guy tries to protect the interior. I've seen other tutorials where they are throwing water about all over the place.
+SlowerMindsKeepRight seen that one owner looked upset but didn't say a word
Out of 10's video on the ytube, only video with the guys providing some protection to interior and rear seat. Kudos.
Otherwise, just dripping soapy water all over the seats and even on the speakers, without any care!
It’s not a big deal, that’s why
best tuturial i've ever seen thnx
good to know that the tunt doesn't have to be completely flat. just get the fingers out, but I'm still having trouble with mirrored tint
This music inbetweeen the breaks is so annoying
Thanks for your time to show a Training video.
Where can I purchase some of the tools used in this video?
Please Reply.
great job!
Sempre limpar bem antes de colocar o Insulfilm para recortar e moldar no vidro,
Dude you need to use the reverse roll on these big windows. I'd do this one in 10 minutes
How did you prep the dot matrix on top so the film lays down nice?
very nice tutorialwhat is the name of the powder?
knightgangsta Johnson and Johnson. lol. any baby powder will work but its always messy, other methods to dry shrink that work jus the same if not better.
Gracias 👍🇲🇽
10.14 the classic " Frankenstein " install !!
what film easy for renault megane 2: shadow or black pearl
How much soap solution do I put in my five gallon keg
2 squirts per litre.
great video ! looks very difficult. i think your video is reference until i saw 10:14. that looks way more difficult than the roll together method from artisticwd here on youtube. other than that, i like your technique better.
Cuando quieran les doy clases sobre eso!
where do you buy the big squeegee
tool catalog from your film supplier they should have it in the listing ...
You shouldn't squeegee vertical through the Defrost Lines ! ! ! That can cause a Break in the Lines.
Plz give me trening
Demasiado tiempo
I can install more than easy
Contact me if you need a worker
main problem is air babools wat will i do
you mean bubbles. you didnt shrink with heat gun first, or you didnt clean inside proper, then squeegee all air out to set, in cool shady place.
You have to shrink the film well.clean the glass from inside
Sungard is not the greatest film in the world.
Now I know y 9 years later most dodge windows are all bad lol film sounds like tin foil as well lol
aprendi como polarizar pero no te entendi niuna wea jajaajaja gracias igual
I hope you don't actually tint like this? I can blowtorch this and have it installed in ten minutes
facepalm
U don't know tinting
Totally cool - The tint looked far from flat yet it installed great. I've been trying to shrink on a curved rear window on a big Ford Crown Vic and have been making the mistake of trying to get it perfectly flat.
Susan Vue I was thinking the same thing, bet some fingers crept up after the video stop rec. Lol. even though those are pretty flat windows I would always hard card the film flat. like to see him do that on Saturn or jaguar rear. 😂😂😂
Bet it'd have peanuts on the defrosters of a Dodge Challenger!
what does Madico have to do with crappy sungard films?
That license plate technique.. Amazing!!
what size did you use for the rear window? 20 inch x 6ft?
there was alot of things, can't really say wrong cause obviously the install worked but way better ways to dry shrink and this guy did and didn't do things that should be taught. I've worked many times with sun gaurd films, it's not bad film but can be quirky when shrinking if your not paying attention. good video but like i said definitely things that should have been taught that are good knowledge and can make things easier, but all in all good install and good vid.
I do better work
I like your squeegee when can I buy one that long
Não mostrou a chancela da % do filme
Price pls
Hi Talisman. Can you please fill out this form? It will help me identify the correct person here at Madico that will be able to get you pricing information. Thank you. madico.com/contact
G35 bem claro,
hi sir i am from india wen i was tinting the film there is a lot off air babools coming wat will i do please tel me and i need by those tools wer did i wii get it
sridhar thati hey man use can use a credit card if you have one that is thick and not sharp or the'yre called squeegees if you want to buy one online
online in india please
What temp does the heat gun need to be to shrink the film the best?
You want that on high .. the hottest setting u got ... I use the Milwaukee digital heat gun I think it was 300$ been a few years since i had it .. I only use Milwaukee guns because the heat is consistent all others I have used suck they are not consistent at all ... Buy a good gun you will see the difference ... I also shrink using a torch with mapgas .. can shrink a back window in 2 minutes lol... any way hope this helps ....