This is a quick video of the proper techniques for installing commercial window film by James Denton of American Standard Window Films. Sorry about the lighting.
Thanks for sharing , I've been window tinting for a fair while now and never seen anyone release the liner that way such a fantastic technique thank you
What solution do you spray ? Water ? Thank to share I heard there are three levels of light , medium and dark . For business window, should be light? Thank
Amigó: Me gustaría un vídeo de cómo se ven cada ventana con los diferentes colores y sus nombres del papel ahumado desde el exterior e interior. Para los que no conocemos de los nombre del papel principalmente el del estilo espejo de un solo lado.
The problem I've been having is the trimming. I'll try this knife card technique. Lately I've been cutting or. Ripping off a corner because of the two ends splitting from razor
that's because you are probably leaving way too much excess film on the edges when you cut it, try to leave just about one inch not more than that, it help with trimming at the end and your film dosent rip on the corners. more crease to deal with in the corners more chances to rip them out.
Hello, I have watched about five videos on installing window film and it looked like you peeled the clear backing off from your side/away from the window?? Which makes it look really easy but everyone else says the adhesive side (the side the clear pulls away from) goes against the window? Does it matter? Thank you for your video.
He first separated the liner then wet the roll so the liner would stick to the roll when the films gets unrolled the liner gets removed and is actually being transferred simultaneously to the opposite side of the film, the non sticky side. So it looks like he is removing the liner once the film is on the glass when actually the liner is already removed from the glue side so it’s just clinging to the non sticky side so he just discards it. The sticky side or glue side goes on the glass so you’re correct.
@@igormaric7866 he used a technique that meant as he dropped the roll, and it made that lovely sound, the release liner was actually removing its self and switching to the other side of the film. Next level move!
Mark Kruger I don’t disagree, and I have also tested and failed to replicate his technique. But at the 3min mark he is peeling back the film, so we know it is a standard film, then he drops the roll in one action, and then he removes the clear backing liner that is sitting towards the bottom of the window, in front of the film. At no point does he stick his arm behind and peel it back, or flip it over and remove it, then flip it back. I will work it out, and will report back :-)
Excellent tips and funny tutorial. I like the part when you bite the film, lol. I was wondering if you have any tool on your professional belt pouches. You look like a police with the gun and accessories on the belt. Also, was funny the tripod movement, I think needs a WD-40, lol
You can either precut your panes exactly with a film handler, or you could master the art of freehand cutting and not cut a bondo to guide you, or the glass could be tinted before installed in the frames.
That streaky appearance is part of the curing / drying process. After application there is a thin layer of water left under the film that needs to dry out via evaporation. Just leave it alone and it'll be all dry in 3 - 7 days.
@@Jcr8519 At approx. 2:26 you said you wet the film. Did you measure the piece you need, wet the liner side, and then roll it back up? Then you have a rolled up piece of wet window film? You said yo wet it so it will stick to the back of the window film? I don't understand what you meant when you said that..
So quick question. I’m going to adapt the window tint on cars and commercial windows to my Auto Detail business what are the best films for commercial flat windows. I’m located here in CA San Diego. Would be great if I get a response. What size is the film you use
Best residential/ commercial film is Johson window film in my opinion and many others. For automotive best film gots to be solar fx in my opinion and many others as well! Theres many great film companies out there. As long as they are life time warranty films and has good customer service its good to go!
It'll look like a mirror from the outside, that is until night time when its lighter inside than out and then the effect reverses, people will see in but from the inside you are looking at a wall of mirrors
AT 2:26 you said you wet it. What did you wet? Did you pre measure the film, spray the front... or back, and then roll it back up? That sounds like a pretty important step we've missed.
12-inch squeegee, credit card, Auto store Blue shop towels, spray bottle with a little bit of dish soap and water, make sure you soak the window and the back of the film pretty good before you lay it all the window it'll help position it better, you're going to have to get all the air bubbles out. He made it look easy, but you're going to have to go over it a few more times to get all the air bubbles out before it actually dries.
Pattern way too big. Never press up… gravity works. Never press all the way to the edge when film is not trimmed…. Really? Card trimming? What are we? Rookies? psh smh
Nice well done video but No to cheap, low end Silver mirror film, & no to cheap low balling cutt throat pricing, it has killed the industry & my business !
![College Football 25 Road To Glory - Transfer Portal & First Team All-American [FRESHMAN YEAR]](http://i.ytimg.com/vi/U8UYgoKneCo/mqdefault.jpg)
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Best no-nonsense tint vid I've ever seen. 👍👍
Thanks for sharing , I've been window tinting for a fair while now and never seen anyone release the liner that way such a fantastic technique thank you
Solid. Thank you. Knowledge is power.
This was so relaxing and satisfying to watch. Thank you!
I thought the film you took off covered the side you were suppose to stick on the window.
Hey isn't the adhesive in between the liner and the tint? that was backwards the way he just installed it.
Thank you very much for sharing your trade with us
I did my first window tint .... thanks and God Bless you for share your knowledge and God Give you health and Happiness.
Great tips! Very useful for a beginner installer like me. Thank you sir!
My brain: Get it!
My hands: no, you don't.
Thanks so much for taking the time to do that. Had done one already fairly disastrously and as it is so expensive, would like to do a good job
Same.. the pressure of a fail job is crazy this is a good video
best video ive seen on this, with use of smart techniques..
The best video I have ever seen, Thank you!
Best of the Best Techniques thx for sharing !!
Thanks for posting much appreciated!
Wow nice job. Thanks for sharing!
Great video! Thanks for sharing!
Nice.. place just installed sliding doors to my house .. definitely going to follow this way
what tint do you recommend to use in a house that has south-facing windows and turns the house into an oven in summer?
Thanks for share your knowledge.
what width should the roll be for commercial windows?
Thank you! Very helpful!
Gosh you’re good at that. I wish you’d do my windows.
great job there,thank you
Thnk u...super clear tutorial...
Great video!
Thanks I guess this will be something new 4 me too. Retired 👨🏻🚒 but still working.
But what does the outside look like when you finished?
What solution do you spray ? Water ? Thank to share
I heard there are three levels of light , medium and dark . For business window, should be light? Thank
DAYUM! You're good!
Great video
I have some from last year.. But light is bright from outside and i can see right through
can you install on the inside when a window says clear/loE on it?
Amigó:
Me gustaría un vídeo de cómo se ven cada ventana con los diferentes colores y sus nombres del papel ahumado desde el exterior e interior.
Para los que no conocemos de los nombre del papel principalmente el del estilo espejo de un solo lado.
Even James got that tint
Very nice job
Where can I get an extra wide film like this for my big sliding glass doors?!
nice one James
The problem I've been having is the trimming. I'll try this knife card technique.
Lately I've been cutting or. Ripping off a corner because of the two ends splitting from razor
that's because you are probably leaving way too much excess film on the edges when you cut it, try to leave just about one inch not more than that, it help with trimming at the end and your film dosent rip on the corners. more crease to deal with in the corners more chances to rip them out.
Do you need a special kind of window tint for double pane glass?
No you need good quality film
Where did you purchase this film my friend?
I've been tinting for 20 years and want you to explain to me how you got a factory edge on top and not the side
Roll size
Hello, I have watched about five videos on installing window film and it looked like you peeled the clear backing off from your side/away from the window?? Which makes it look really easy but everyone else says the adhesive side (the side the clear pulls away from) goes against the window? Does it matter? Thank you for your video.
He first separated the liner then wet the roll so the liner would stick to the roll when the films gets unrolled the liner gets removed and is actually being transferred simultaneously to the opposite side of the film, the non sticky side. So it looks like he is removing the liner once the film is on the glass when actually the liner is already removed from the glue side so it’s just clinging to the non sticky side so he just discards it. The sticky side or glue side goes on the glass so you’re correct.
Great video thanks for sharing I was wondering if you can show how to do it from the outside window please
Thank you sir
what film did you use
Probably 3M or Lumar.
Good job :)
👍
First time a saw this way to install window film ,
Dosen’t matter which side we use outside or inside ?!
Old video but very helpful
Are the films pressure sensitive? The liner was removed, i thought that was the side with the adhesives in between the tint and liner.
I was wandering the same thing. This is probably one of those static cling film. I could be wrong, though.
@@igormaric7866 he used a technique that meant as he dropped the roll, and it made that lovely sound, the release liner was actually removing its self and switching to the other side of the film. Next level move!
Zoli Rutter still not getting it. Liner he removed was the back side???
Zoli Rutter that makes no sense
Mark Kruger I don’t disagree, and I have also tested and failed to replicate his technique. But at the 3min mark he is peeling back the film, so we know it is a standard film, then he drops the roll in one action, and then he removes the clear backing liner that is sitting towards the bottom of the window, in front of the film. At no point does he stick his arm behind and peel it back, or flip it over and remove it, then flip it back. I will work it out, and will report back :-)
Excellent tips and funny tutorial. I like the part when you bite the film, lol. I was wondering if you have any tool on your professional belt pouches. You look like a police with the gun and accessories on the belt. Also, was funny the tripod movement, I think needs a WD-40, lol
What if customers ask for no gap at all?
You can either precut your panes exactly with a film handler, or you could master the art of freehand cutting and not cut a bondo to guide you, or the glass could be tinted before installed in the frames.
film applied..looks flawless....but then streaks appeared hours later...what did I do wrong?
That streaky appearance is part of the curing / drying process. After application there is a thin layer of water left under the film that needs to dry out via evaporation. Just leave it alone and it'll be all dry in 3 - 7 days.
@@ianbreeze5309 yes...realized that later - after tearing out an earlier install. Live & learn! Thanks for replying.
@@earthcomedy ha ha right on 🤙🏼
What would be the price of a winder like this and what would his margin be?
Lol apparently already watched this. Im an installer now
how heavy are these windows?
Heavy?
Nice work sir!
What's in your soap solution??
It's just water and soap you can use dish soap as well
@@Jcr8519 At approx. 2:26 you said you wet the film. Did you measure the piece you need, wet the liner side, and then roll it back up? Then you have a rolled up piece of wet window film? You said yo wet it so it will stick to the back of the window film? I don't understand what you meant when you said that..
Anyone saw what happened over there?
What kind of paper towels do you use???
@SaltyBrains i lol'ed
How many kilometres has that Nissan outside travelled? Plz need to know before starting my windows.
So quick question. I’m going to adapt the window tint on cars and commercial windows to my Auto Detail business what are the best films for commercial flat windows. I’m located here in CA San Diego. Would be great if I get a response. What size is the film you use
Best residential/ commercial film is Johson window film in my opinion and many others. For automotive best film gots to be solar fx in my opinion and many others as well! Theres many great film companies out there. As long as they are life time warranty films and has good customer service its good to go!
How much would you charge for that window ?
Normally people in charge by square feet depending on the cost of your roll but normally it's like $7 per square feet
He just showed how to DIY so you can keep that money in your wallet.
Like a pro.
U alive?!!
tnx u sir.. for your video
You forgot to show us from the outside.
It'll look like a mirror from the outside, that is until night time when its lighter inside than out and then the effect reverses, people will see in but from the inside you are looking at a wall of mirrors
I believe your tripod is too tight. Is always good to practice before recording.😉
AT 2:26 you said you wet it. What did you wet? Did you pre measure the film, spray the front... or back, and then roll it back up?
That sounds like a pretty important step we've missed.
And that how it's not done boys.
I would like to know the tools needed...
12-inch squeegee, credit card, Auto store Blue shop towels, spray bottle with a little bit of dish soap and water, make sure you soak the window and the back of the film pretty good before you lay it all the window it'll help position it better, you're going to have to get all the air bubbles out. He made it look easy, but you're going to have to go over it a few more times to get all the air bubbles out before it actually dries.
Noisy chair! Lol
Pattern way too big. Never press up… gravity works. Never press all the way to the edge when film is not trimmed…. Really? Card trimming? What are we? Rookies? psh smh
not any more sir... keep on tinting baby...
Nice well done video but No to cheap, low end Silver mirror film, & no to cheap low balling cutt throat pricing, it has killed the industry & my business !
That’s not how you clean windows