OverPowering is a real thing I over Powered a bike once the Power was Awesome but at the same time it was way to much it was a job itself trying to keep the front wheel in the ground plus at high speed its very scary I could never full throttle a take oof everything had to be done careful that part wasn't fun
Bro everything is for sale for the right price question is what would you be willing to pay? I have about 8 grand in this bike and that's building it from scratch including the battery which I probably saved 2k on because I built it myself. So yes that's what I've spent with no labor. You can put the right money to that dam right I'd sell it. 😆
Its also a dirt bike stance that hits different. You can sit in a car and feel protected at 70 not even realize your going fast, Or you can sit on top of the world with a dirt bike. The only thing close is a Honda CR500AF but most can't even deal with kickstarting a bike. It's crazy to have all that power and no noise, it doesn't even make sense.
Thank you, well good luck to you Bro I think it's the best way to go. Save allot of money while learning to work on your own bike is a win. Then you feel even better about your bike. I know I talk smack but hey you build your bike from scratch you earned the right to do so and if they don't like it, oh well. It's RUclips is free when they start paying me they can complain.
we have actually been considering doing small run builds of fully alloy bomber frames,but with real linkage suspension and 3 piece bolt together swing arm rather than solid one piece would be looking at no more than 10 kilos id say
You mean those cheap frames with the bad welds? I personally haven’t had any issues with this frame at all when I say overpowered I just mean it’s way too fast lol but no problems with any of it other than me myself being worrisome of pushing it but the this frame has held up fine. I can see it snapping those cheap frames tho if they had this amount of power they were snapping from jumping I’m sure this amount of torque probably snap them too
Bypass for myself but BMS as far as Battery Monitoring system and that's me, only because this is what I did I monitor Temps and voltage and I do the managing. I'm not putting my trust in a BMS to do the right thing now I do have it on the charge side but this is supposed to be a race bike no way I'd have any bottle necks and because I also tune for low impedance that would screw up all my calculating for low resistance and max current flow. I don't recommend everyone do that unless their as anal as I am but yeah straight. I like it RAW! I wouldn't even use a breaker if this were Surron
@@ChrisCrossingWires1212 I also see you’re using the kweld for spot welding. What do you think about using the kcap? Is it powerful enough to weld the copper nickel sandwich?
@mattwp125 I myself have no experience with it but I do have a friend that uses those and he told me he had to use 2 sets of those to weld thru copper so Idk 🤷♂️. That's very expensive I've tried couple different methods first using molicel even 3s8p wasn't enough to last for a decent amount of time. It did work when I added a 16Farad car stereo stiffening capacitor. That helped allot but still doing big batteries those molicel got way to hot for my comfort. I eventually went to a marine battery with the cap that's what I use now. I love to try the glitter but this works for now just not portable
oh Chris gus mentioned that he was trying to find one of those gumarta seats i think they are but he cant find them and they not on their site .do you know if they stopped stocking them?
I heard the same thing, I happen to have one of them with no fusion as we used the fusion on the Qulbix bike. Yes I did hear people can’t get them anymore, you know there made in Ukraine so that company may went out of biz from the War possibly
ASI don't read above 80 then it goes negative. I have to use straight GPS but that don't give my all the other telemetry. As long as you been here you never heard me mention that before. I don't know why they won't fix that. It's a easy software fix. Maybe they think that's the most it should do. You never seen it doing that. goes 80 then starts going Backwards
@@ChrisCrossingWires1212 yea that makes sense but it’s very strange of them to limit it like that! I can clearly see the bike is picking up more speed and can def hit 90+ but it goes negative lol
❤❤❤❤❤The beauty of the night and the red lights
Superb
OverPowering is a real thing I over Powered a bike once the Power was Awesome but at the same time it was way to much it was a job itself trying to keep the front wheel in the ground plus at high speed its very scary I could never full throttle a take oof everything had to be done careful that part wasn't fun
Yes sir Don’t get me wrong I’d still do it the same, lol I’m just saying this thing is crazy as Ish! lol
Good vid bro.
Appreciate it
Love your Channel!
Bro everything is for sale for the right price question is what would you be willing to pay? I have about 8 grand in this bike and that's building it from scratch including the battery which I probably saved 2k on because I built it myself. So yes that's what I've spent with no labor. You can put the right money to that dam right I'd sell it. 😆
I ain’t gone lie… I wanna buy it. I’m in Los Angeles
Its also a dirt bike stance that hits different. You can sit in a car and feel protected at 70 not even realize your going fast, Or you can sit on top of the world with a dirt bike. The only thing close is a Honda CR500AF but most can't even deal with kickstarting a bike. It's crazy to have all that power and no noise, it doesn't even make sense.
True that, it doesn't but look at how many people are trying their best to not make sense, go figure!
I only want power and go 30 LOL
its because of your amazing videos... i also want to build a 72V ebike
Thank you, well good luck to you Bro I think it's the best way to go. Save allot of money while learning to work on your own bike is a win. Then you feel even better about your bike. I know I talk smack but hey you build your bike from scratch you earned the right to do so and if they don't like it, oh well. It's RUclips is free when they start paying me they can complain.
I like scary fast, 🥰😄
yeah always worried me that qs 273 with those thin swing arms .id love to get some fracture scans done on the swing arm ,
we have actually been considering doing small run builds of fully alloy bomber frames,but with real linkage suspension and 3 piece bolt together swing arm rather than solid one piece would be looking at no more than 10 kilos id say
definatly would put the pedals and cranks into the main frame not the swing arm aswell ,i tryly hate that
unfortunatly they are going to a couple of thousand id think but thats pretty much what quilbix frame costs aswell
we found someone thats happy to weld them all up in exchange for one of the finished bikes
You mean those cheap frames with the bad welds? I personally haven’t had any issues with this frame at all when I say overpowered I just mean it’s way too fast lol but no problems with any of it other than me myself being worrisome of pushing it but the this frame has held up fine. I can see it snapping those cheap frames tho if they had this amount of power they were snapping from jumping I’m sure this amount of torque probably snap them too
will you sale it? i like it
Do you have a 500A BMS or are you bypassing the discharge on the BMS?
Bypass for myself but BMS as far as Battery Monitoring system and that's me, only because this is what I did I monitor Temps and voltage and I do the managing. I'm not putting my trust in a BMS to do the right thing now I do have it on the charge side but this is supposed to be a race bike no way I'd have any bottle necks and because I also tune for low impedance that would screw up all my calculating for low resistance and max current flow. I don't recommend everyone do that unless their as anal as I am but yeah straight. I like it RAW! I wouldn't even use a breaker if this were Surron
@@ChrisCrossingWires1212 I also see you’re using the kweld for spot welding. What do you think about using the kcap? Is it powerful enough to weld the copper nickel sandwich?
@mattwp125 I myself have no experience with it but I do have a friend that uses those and he told me he had to use 2 sets of those to weld thru copper so Idk 🤷♂️. That's very expensive I've tried couple different methods first using molicel even 3s8p wasn't enough to last for a decent amount of time. It did work when I added a 16Farad car stereo stiffening capacitor. That helped allot but still doing big batteries those molicel got way to hot for my comfort. I eventually went to a marine battery with the cap that's what I use now. I love to try the glitter but this works for now just not portable
@@ChrisCrossingWires1212 One more question for now lol. Do you have access to the BACDoor app or does Kilowatt give you everything you need?
oh Chris gus mentioned that he was trying to find one of those gumarta seats i think they are but he cant find them and they not on their site .do you know if they stopped stocking them?
the bomber seats on ali express with the frame look abit cheap
I heard the same thing, I happen to have one of them with no fusion as we used the fusion on the Qulbix bike. Yes I did hear people can’t get them anymore, you know there made in Ukraine so that company may went out of biz from the War possibly
most of the war is over Russia smashed everyone ,but the west media is still promoting it ,so the cabal can siphin more cash from the west
this is why the worlds like it is,they are taking revenge on us all
What size are your rims Chris
19s
Your Speedo never goes above 79 , how come ? It down but you accelerating
ASI don't read above 80 then it goes negative. I have to use straight GPS but that don't give my all the other telemetry. As long as you been here you never heard me mention that before. I don't know why they won't fix that. It's a easy software fix. Maybe they think that's the most it should do. You never seen it doing that. goes 80 then starts going Backwards
@@ChrisCrossingWires1212 yea that makes sense but it’s very strange of them to limit it like that!
I can clearly see the bike is picking up more speed and can def hit 90+ but it goes negative lol