A PERFECT DAMASCUS STEEL KATANA MADE FROM A LARGE BEARING
HTML-код
- Опубликовано: 6 авг 2023
- In this video, we'll be discussing the process of making a perfect Damascus steel katana using a large bearing. This katana is designed to be the perfect size and weight for anyone looking for a quality sword.
This katana is made from high quality steel and is full-tang, which means it has a long blade and a thick spine. This sword is designed for ninja and samurai warriors, and is perfect for anyone who is looking for a quality blade that will last years.
So if you're in the market for a Damascus steel katana made from a large bearing, be sure to check out this video! We'll show you all the details about how this sword is made and how to get the perfect
My Other Knife Videos:
Incredible Custom-made Knife That I Made In 1 Day: • Incredible Custom-made...
Mega Sharp Dagger Made Of Damascus Steel: • Mega Sharp Dagger Made...
Created an Incredible Dagger with a Brass Handle from an Ordinary Piece of Metal: • Created an Incredible ...
Creating an Unrealistically Sharp Knife from a Piece of Metal and Bamboo: • Creating an Unrealisti...
I Made An Incredibly Sharp Knife Out Of An Ordinary Piece Of Metal: • I Made An Incredibly S...
#knife #sharp #metal 
Хобби
You had full trust in your welding skills. If that nut had broken off @2:13 you might have stumbled right into that glowing hot bearing.
Den Kannibalen aus der Nachbarschaft hätte es gefreut Er hätte nicht extra den Grill anzünden müssen 🤣
can't believe you've gotten this far in life and still have your eyesight!
Master of the safety squint!
Not to mention no safety guard on the angle grinder, looks where his wrist is.......... amputee anyone??
Safety glass is always a good idea 😊
Nice job though.
His retinas are fried from the uv already so what's a few metal shards 😢
Ear protection too. He'll be deaf by the time he's seventy.
That was hard to watch him running that grinder. Discs don't care what you aren't wearing when they break or shed. He doesn't care for gloves either.
@@Einwetok My thoughts exactly. In the pulp mill I used to manage, guards were mandatory on all grinders.
@@edgarroste7855even safety glasses arent enough, grinder will find a way to throw shit under them and in your eyes, it happened to me and then i bought google instead to not become blind 🤣
Охрана труда вместе с техникой безопасности ушли в отпуск 😮
Это да, а я думал он обратно подшипник сделает😂
Смотря на такую технику безопасности я начинаю верить в существование ангелов-хранителей...
😅
А что не так ?! То что на болгарке не стоит защитный кожух , так из под него ничего не видно , он только мешает !
@@Phoneshop-ye5kn только утром вспомнил, что у меня есть несколько подшипников именно этого размера, и вот захожу в ютуб , а он уже подсовывает видео)))
@@Phoneshop-ye5kn я только соглашусь с вами
@@user-xm2lm2fd3c
Два глаза - роскошь !
Глазом больше , глазом меньше !
I like the use of the “safety squint” throughout the build. I use them all the time. Almost works every time.
It works great when welding too
LOL h😂😂😂😂😂😂 .so dangerous
The tang is tooo short
Collection of most dangerous tools on the planet 🤣
How do you dare to call this a katana ?!
dude, he can call it a pineapple if he wants to. why do you care?
@@MrPetrion Consider the many master-smiths who dedicated their life to make the katana one of the finest swords of the world. Respect, please.
+1. This isn't a katana in any sense of the word.
True, this is more like a tantô, used only for suicide.
.... If it's because it's a short blade why you two don't consider it a katana .... Then you're right .... The proper name is a wakizashi .... Or short blade katana .... Was worn in tandem with the actual katana at the hip .... Sooooo yes ....
Grande mestre ferreiro que Deus abençoe sempre seu trabalho muito bom excelente profissional parabéns pelo vídeo
17 минут вычеркнутые из жизни, впустую.
I just love his shop!
Lots of natural light.
👍👍
When watermelon costs more than katana. Nice job!
When a watermelon is worth more than the 'katana'...
That's a pretty short/narrow tang for that blade length
@@jtroh8195yeah, the lack of a pin (or any mechanical fastening) tells me this is a show piece rather than a functional tool.
While this is a good build, the weapon is NOT a katana and only barely falls under the description of a "shirasaya wakizashi" due to its final appearance.
If you want to make a true oriental style blade, please look up more realistic representatives online to see what I (and others) mean. 👍
Es un trabajo nada más un simple cuchillo para tener en la vitrina y listo dejen de hacerse los especialistas en katanas encima la katana la famosa katana no es más que una espada muy inferior a otras europeas así que le guste a quien le guste esto es un cuchillo para vitrina
@@mariomoyano692 Oh I have no problem with the sword friend.
I actually like it, it looks good and is functional, I'm just particular about labelling tools/swords correctly.
yes, using the proper terms for things is important, this could be called a tanto sense that seems to often apply to the tip style, but defiantly not a katana because the handle/guard and length are wrong.
@@FUBuddy I don't mind the final appearance of the handle and guard since, as I mentioned above, they fall under the shirasaya style of oriental blades (basic wood hilt with little to no guard),
In my mind, the shorter length looked to be closer to that of a wakizashi rather than the much shorter tanto, but thats just my opinion. 😁
Man I'm surprised this guy still has his vision and still has fingers, the level of unsafe practice in this video is phenomenal.
Use eye protection, and ffs use the right tools for the job
Bonus points: airborne fine particles and chemical fume inhalation ftw!
So because you wouldn't feel safe with the tools he uses you feel the need to harass him with your meaningless comments. The man is old school and feels safe with how he does things leave him be. If it bothers you so much don't watch
@@huffmanjustin87 ^ this comment. I would never have the balls to do what this smith does. I wear all kinds of protective clothing and wouldn't even touch some of his machines, but just because I wouldn't do it doesn't mean I don't respect his process. I wouldn't even think of harassing him for his choices. He does what he knows and creates beautiful one off pieces from it. I'll still watch, but I'll also admit he has more testicular fortiitude when it comes to machines than I ever had or ever will.
@@Moondog-wc4vm not using protective glasses and many times not even wearing gloves is not "having balls" , it's plain stupid. Old school or not, it's not bravery to risk your eyes or other injuries when you can simply protect yourself.
With all that already said, respect where it dues! It's still nice job even though it's not catana even remotely :)
@@huffmanjustin87 Yeah except young men might watch this and think it’s cool or okay when it’s not. By leaving a comment on his comment, you’re being a hypocrite without even knowing it. If you don’t like his comment, don’t read it. Grow the fuck up
Beau travail !!!
Nice job Safety glass is always good idea👍👍👍 Bangladesh 🇧🇩🇧🇩
Кабачки рубить пойдёт, арбуз уже не осиливает нормально. Приложенные усилия и конечный результат не особо вяжутся, ожидал на выходе совсем другое, хотя после насаживания рукоятки надежды быстро растаяли
Сувенир))
Proses pembuatan yang membutuhkan ketrampilan tingkat tinggi, di negara Indonesia menyebutnya tukang pandai besi.. 👍👍👍
Странно ,у него до сих пор все пальцы на руках!
Точно. ТБ у музчины прямо сказать, на высоте.
Trabajo lindo perfecto, es ud un profecional. Mis respeto.🇦🇷💖
Was looking forward to see you use the whole bearing
No sé si felicitarlo por la obra de artesanía o por no haber tenido un accidente con esas condiciones de seguridad.
Do not hold the angle grinder in such a way that the tool is facing you.
Glad to see that he’s finally using an actual welding helmet instead Oxy Acetylene Goggles to stick weld being safer but then get disappointed when I see him working that 52100 WAY TOO COLD even flattening out the back 2/3 of the bearing race at Black Heat taking it from round to flat at black heat for most of the length of the material, it’s likely got micro cracks in the blade because of that
Es una muy bonita espada, aunque no sea una katana y parezca mas una tanto, no deja de ser un muy buen trabajo.
I must say this guy has great skill to make a Melon chopper 😂
Hermoso, pero debo decir que el grip es inseguro, la guarda debe ser más grande, mi humilde opinión, saludos desde chile
Катана - длина 2 сяку, 60+ см. Меньше - вакидзаси, "сбоку воткнутое". Меньше сяку - танто, айкути...
Это и не катана и не дамаск. И не перфект.
@@valentinkassimov7555 Это вообще американский танто типа)
Ещё про Кодати забыл)
@@darkside8069Ага. Ещё про нодати, цуруги и кен.
Di sarankan kalau sedang memotong atau sedang mengamplas besi harus menggunakan masker demi menjaga kesehatan tubuh kita🙏👍😀
How did you make a mistake in the way of cutting at the beginning? There should be a safety for the cutting machine. I hope you hear my advice.❤
Schon das Zusehen und das Ambiente dazu sind ein wahrer Genuss, das Endprodukt ist sowieso phantastisch. Echte gute alte Handwerkskunst. 😃👍
Надо было шарики выбить с вырезеной части подшипника и все, во себе роботы добавили) Украина смотрит)
Slava Ukraina
Слава Україні! А,може,він хотів зробити все правильно,а у нього не вийшло...😏
@@seyranmanafli4055 Героям Слава
@@user-id2ek9tn5g
Хероям сала)
Украинцы бы так гавняно не сделали
Amazing👏👏
Ótimo vídeo, agora sem falta com o respeito, óculos de proteção e máscara são itens essenciais em qualquer trabalho de funilaria ,cutelaria,o resultado é excelente agora a segurança vem em primeiro lugar 😎
Very professional.❤
Use glasses please. We got only 1 pair of eyes .
Parece una wakiszashi, tiene forma de wakiszashi, es de acero como la wakiszashi, pero ni es una katana ni una wakiszashi. El proceso para crearlas es muy distinto.
¡¿Una wakiszashi con acabado damasco y empuñadura insertada y pegada con epoxi?!.
Aparte de eso, queda una espada corta aparente.
More like a tanto
What a particularly angled bowie knife. Fun
I have just watched the process of making a Damascus knife in one of the South Korean factories, which is repeating the iron very many times, then twisting it, then repeatedly folding the iron, and in the end the result is a high-quality Damascus knife that can easily cut the iron without being affected.
не ври! дамаск красив, но он не прочен!! Сталь дамаском не режут. голова - да!
A criatividade que ele mostra para resolver os desafios que aparecem quando o material é difícil de trabalhar é incrível! Isso deixa bem evidente a experiência dele. Outra coisa que acho muito legal de ver nele é a paciência, a serenidade com que ele trabalha; parece até meditação.
@@rt.woodsteel Конечно вы правы. Я только за отсутствие очков Дизлайк ставлю. Это могут смотреть дети. И будут повторять за ним.
I'm glad to see I'm not the only one who has used a drill bit as a router.
Amazing,,,,,,,gud gud gud job..👍👍👍
Não é uma katana , e não tem montagem de uma katana , más é um grande artista , parabéns .
Parabens pelo seu talento !!
مبدع..
فيديو يستحق المشاهده❤❤
Such a great work. 👍👍
You have a option to cut bearing easily...but you take harder way
Creative
...a video worth watching❤❤❤
Jawa Tengah, Indonesia on... Succes for "Knives... "
I had a good salad for dinner, and tomorrow I’m going to have a burrito for lunch. Maybe late breakfast.
На скорую руку пойдёт!Третий сорт не брак!И,да,кстати,это не катана!
Ковач - хирург :) браво .
Still waiting for the Katana i didn't see one
Mantap bos keren samurai ny,..
I’m always worried about my eyes when someone welding in the video.
Nice work brother
Nice blade
buen trabajo, excelente como machete; `para takana le falta un algo....
what kind of oil do you use to turn the blade into damascus and how long the blade must be in the oil?
that's ferric chlorid
My God man, just asking such question shows you don´t know anything about the making of Damascus.
I thought it was cocomelon😂😂😂
Exelent job
Good job sir...nice katana
Hay que colocarse los elementos de protección cuando este trabajando con la pulidora o amoladora porque ojos naturales de repuesto existen pero todavía no hay trasplante de los mismos así que cuida los suyos EDICHO
Браво, добра работа! Само една забележка... Японците не са правили мечове от дамаска стомана, технологията е подобна, но има разлика, освен това японските мечове нямат дървени дръжки... До колкото знам в Дамаск не са имали такива модерни инструменти...
Препоръка! Изучи добре как се парави дамаска стомана и направи една сабя дамаскиня! Жокер! Работи се само с чук!
Osmanlı imparatorlugu bu teknigi ve üretimi șam da yaptıgı için adı șam çeligi kaldı. Dünyaya tanıtan ve ögreten Türklerdir. Ama 7 defa dövülüp açılması gerekiyor ve su vermekte önemli. Saygılar kardesim
@@Levent-to1jz Sizi hayal kırıklığına uğratmak zorundayım... Türkler bu teknolojiyi hiç kullanmadılar, demir eksikliğinden doğan tamamen Arap teknolojisi! Türkler bu teknolojiyi kullanmadılar. Türklerin demir cevheri vardı ve kalay hurdası toplamadan pala yapabiliyorlardı!
Şimdi bugünkü olaylara geri dönelim! Kremlin ağabeyimiz bir Türk gemisini tutukladı ve mürettebatı taciz edildi. Mürettebat muhtemelen Türk değildi ama gemi Türk'e aitti! Komünistlere daha ne kadar tahammül edeceğiz? Karadeniz'i kapatın ki hiçbir Rus gemisi Karadeniz sularına girmesin!
가열 작업 같은데는 장갑도 안 쓰시는 성님의 포스
2:40 형 지금 오는거지? 오는거야? 아니 오고 있어? 아니 나 죽겠거든!!
Great kitchen sword
6:26 Batman in retirement
new katana for hobbit's ;) jak zwykle filmik wypas 🥰
Where are you located?
I would kill to have a rapier made by this guy
Good job👏👏👏👏
Hai fatto un grande coltello bravo
Podziwiam takich ludzi ,chciałbym takie coś
Do you do this for fun or may order one
de donde sera este maestro en los cuchillos
Amazing
Love your work..but you should put safety glass on when cutting or grinding. Accidents happen quick. Be safe
Excellent work!
“Por mais simples que seja, todo trabalho é uma fonte de realização pessoal.”🍷🗿
👍👍👍💪
What a waste of two perfectly good watermelons.
Ojos a prueba de chispas tiene este artesano
😅😅😅😅
one iron is a bearing the other iron what kind is it?
MAESTRO. QUE DIOS TE BENDIGA. ESE AMOR Y CONCENTRACION PARA HACER ESA OBRA DE ARTE PERFECTA SE MERECE UN 10.5.
❤❤
Meh
Приветствую вас , Мастер ! 👍🙏😍
Мастер? Кому и кобыла невеста, да?
@@user-nz7mt8qm6h , а ты то чьё беспокоишься ? Я его знаю не один год , только вчера видел , что у него есть свой канал . Как ты можешь судить о человеке не зная его ?
Tem esconder o fogo na hora da solda não parceiro?
Так вот чем Мага в свободное время занимается😃
🎉🎉🎉appreciate your hard work.❤❤❤
beautiful videos, sir
forged in fire first rounder award
( please leave the forge )
شكرا لك ياصاديق عمل جميل ورائع
Пилить без защитного кожуха это очень смело
Well done 👏👍👋
А на полочке, сода из Стерлитамака стоит)))).
Perfecto.
ông thợ này cũng giỏi đó .... gần bằng tớ
amazing❤
peroses semakin sulit. maka semakin bagus hasil nya
what is the white powdery stuff you sprinkle on the metal?
Flux
@@jonmcgaw2353 borex.
Very nice axe
Adoro o cabo é simplesmente linda
For what he has available for tools and stock, I would say it is not bad.
I would buy that made by him over one made I china
Неужели нужно расковать подшипник, чтобы разрезать арбуз?! 😅
судя по резу, сперва он его проломал