As an amateur blacksmith myself I have made a few knifes and even a scissors .. I am amazed at this .. I am not a fan of using power grinders to shape a blade.. I want to learn how to do it old school forge anvil and hammer only! but I learned from this video GREAT WORK AND A BEAUTIFUL BLADE YOU DID MAKE SIR!
This video shows the artisan and artist in this man. The hand forged tip. The hand grinded scallops and everything else for that matter. The mosaic pin. Beautiful work. Best blade I've ever seen on this channel. Thank you for sharing your craft.
Love the design of the damascus, and the handle and your profile, but I'm worried about the structural integrity of the blade. I noticed cracks and a lot of cold shuts. I strenuous testing it would break I'm certain. Should've used more flux and really caked it on. I think a canister would've been better with powdered steel to help really seal up those open spaces in the chain.
I think a Damascus is form over function, like a work of art. It's not meant for utility knives which can put up with terrible abuse while looking at best, well, utilitarian. Each has their place. The Damascus here is probably plenty strong enough for light work (especially after the twisting) but not appropriate for a SEAL to carry on missions or anything.
@@alexanderchapman2525 no. The original damask steels were used for fighting swords and frickin gun barrels. You couldnt possibly be morw wrong. This is just bad craft.
I understand your concern and I was thinking the same thing. However during the forging, he ground away at the blank to remove voids. I think that he was able to make a pretty solid blade considering that he also twisted it. This is not a blade that you take into battle and so I wouldn't really be all that worried about it.
De fato um dos damascos mais lindos que já vi. Embora a faca como todo não pareça ser boa por causa da geometria de fio excepcionalmente robusta, de fato é um empecilho para um bom desempenho de corte. Más com certeza o damasco ficou maravilhoso.
Absolutely glorious this! Not exactly the pattern I thought when I saw the chain at the beginning - thought it'd be more of a droplet pattern, but when you start twisting the billet, sir I knew we were in for a treat! Thank you for the great video. What would you say the total man-hours are here then?
The blade is a work of art. Beautiful pattern, very sharp, nice forged tip. That you were able to do this with a grinder rather than a belt sander shows your skill as a craftsman. I do think that the tang is a little thick and that you might have put a bolster on the handle. I think where the blade meets the handle is a little clunky. I did appreciate the way you increased the thickness of the handle as it went from the front to the back. That aside, a very beautiful and well made knife.
What is that ? It's really magic ! The MAN , his arms , his knowledge are on the top . Top of the 🎩🎩🎩 . Harry Potter is only the child near the Master 🎉🎉🎉
Nice blade,pattern is awsome ...handle could be/look better(shape,type of wood,to skinny maybe ...i dunno it just doesnt look right)....alot of hard work there....well done..i like it!
I couldn't agree more. I'm not a forger. But I have a 2 handed 7" angle grinder as well as a 5" 1 handed angle grinder. And when something isn't going your way, a lot of times one of those is your friend. Beautiful beautiful blade pattern by the way.
Awesome job man. I would love to see someone make a real traditional damascus knife, sward, dagar, whatever, the original way. No welders, no grinders, no chop saws, no leaf springs, no chains, no this, no that, just good old steel, a furnace and a hammer plus other tools of the trade they used to use. Not saying your work isn't bad ass because it definitely is.
You have probably been asked many times previously unfortunately I’m going to ask again, When you have quenched in the engine oil what is in the can you put it in after please? Asking because I am teaching myself blade smithing.
Love it .... what is the small piece of metal that was welded in the middle of the 2 bigger pieces that you cut into two? I missed where that one was made. Was it from a previously made piece of steel.... killer looking knife ... thanks
Orang Damaskus Jaman Dahulu Tidak Menggunakan Alat Modern Untuk Membuat Pedang ✍️ Dan Orang Jaman Sekarang, Tidak Memerlukan Pedang Damaskus Untuk Berperang 🤓
Wow evidently I am lucky enough to be reading a video post with all these knife making experts, I've learned so much with all the input from metallurgists and, historians alike ,thank you,thank you, YOU KNOWLEDGE MASTERS! Someone please write Theese wheel keelll ! P.S I will be looking for your videos of crappy knives you made LOL
Magnificent, you are the king of the grinder! But I repeat myself again, protect your ears against noise! Just by watching the video, I turn down the sound, so I imagine the noise of the grinder in real life, I use one myself sometimes, and I could never use it without my noise-canceling headphones. Otherwise, put reusable earplugs made of a sort of silicone, it costs nothing on Chinese sites, and it protects very well from noise. I always have a pair next to the bed if my neighbors make noise in the morning while doing work at home, it also saves me sleep. Really, think about it, protect your ears, because all the beautiful things you will have made during your life, they will make you deaf. And it is not pleasant not to hear, as much for the one who cannot hear as for those around you who have to speak loudly to be heard. Or like my father who turns up the volume of the television extremely loud until it hurts my ears, he manages to fall asleep with such a loud volume. But for him, it is his years as a DJ and musician that have made him deaf. When you are young, you think you are invincible, but when you are old and deaf, having to wear a hearing aid is not at all pleasant either.
As an amateur blacksmith myself I have made a few knifes and even a scissors .. I am amazed at this .. I am not a fan of using power grinders to shape a blade.. I want to learn how to do it old school forge anvil and hammer only! but I learned from this video GREAT WORK AND A BEAUTIFUL BLADE YOU DID MAKE SIR!
This video shows the artisan and artist in this man. The hand forged tip. The hand grinded scallops and everything else for that matter. The mosaic pin. Beautiful work. Best blade I've ever seen on this channel. Thank you for sharing your craft.
Love the design of the damascus, and the handle and your profile, but I'm worried about the structural integrity of the blade. I noticed cracks and a lot of cold shuts. I strenuous testing it would break I'm certain. Should've used more flux and really caked it on. I think a canister would've been better with powdered steel to help really seal up those open spaces in the chain.
I think a Damascus is form over function, like a work of art. It's not meant for utility knives which can put up with terrible abuse while looking at best, well, utilitarian. Each has their place. The Damascus here is probably plenty strong enough for light work (especially after the twisting) but not appropriate for a SEAL to carry on missions or anything.
@@alexanderchapman2525 no. The original damask steels were used for fighting swords and frickin gun barrels. You couldnt possibly be morw wrong. This is just bad craft.
Yeah he should have folded and forge it even more.
I didn't see no cracks or anything to indicate this thing will break off in your hand
I understand your concern and I was thinking the same thing. However during the forging, he ground away at the blank to remove voids. I think that he was able to make a pretty solid blade considering that he also twisted it. This is not a blade that you take into battle and so I wouldn't really be all that worried about it.
Unless he filled all the air gaps in the chains with powdered steal, idk how this blade is possible. Cold shunts much? I could be wrong
So relaxing to watch how this skilfull smith turns the metal into masterpiece!
The pattern looks so clean! Great job.
OMG! That looks so much like a tiger stripe pattern, I want that so much! So beautiful! Stunning work!
Beautiful blade! The handle turned out amazing as well.
The resulting pattern is amazing !
Excellent work ! 👏
An absolute work of art! Beautiful and functional.
the etching looks amazing
Absolutely beautiful!
De fato um dos damascos mais lindos que já vi. Embora a faca como todo não pareça ser boa por causa da geometria de fio excepcionalmente robusta, de fato é um empecilho para um bom desempenho de corte. Más com certeza o damasco ficou maravilhoso.
Absolutely glorious this! Not exactly the pattern I thought when I saw the chain at the beginning - thought it'd be more of a droplet pattern, but when you start twisting the billet, sir I knew we were in for a treat! Thank you for the great video. What would you say the total man-hours are here then?
The blade is a work of art. Beautiful pattern, very sharp, nice forged tip. That you were able to do this with a grinder rather than a belt sander shows your skill as a craftsman. I do think that the tang is a little thick and that you might have put a bolster on the handle. I think where the blade meets the handle is a little clunky. I did appreciate the way you increased the thickness of the handle as it went from the front to the back. That aside, a very beautiful and well made knife.
excellent Damascus pattern
most beautiful knife I've ever seen
The texture/pattern on this one is awesome! Reminds me of the lizard...
Masterfully done.
That was so good to watch.
Beautiful. ❤
That's a beautiful blade!!!
What is that ? It's really magic ! The MAN , his arms , his knowledge are on the top . Top of the 🎩🎩🎩 . Harry Potter is only the child near the Master 🎉🎉🎉
Good job Fahad from pakistan
Dope AF results, Knives Project! Now it needs an equally dope sheath to complete the package!!
Very unique blade, well done for sure.
Bellissimo il disegno dell'acciaio che si armonizza perfettamente con la sagoma della lama stessa e del manico !
WOW!!! That looks amazing!
Nicely done brother ❤
That was fun to watch. Great job.
you can hear the voids in the steel on the drill press
خوشبحال کسی که این اثر هنری فوق العاده قشنگ رو میخره❤❤❤❤
Seni Pembuatan yang luar biasa,
Wonderful job! 😍😍😍
Bel lavoro ,complimenti !!!
Absolutely amazing! Love the design.
Fantastic work
Beautiful piece of art 👍🏼👍🏼
Awesome Job!!👍
Beautiful pattern, reminds me of a Bengal cat's markings.
That is your nicest pattern yet!
Very nice 10/10
The powder is thin steel powder to help adhesive metal together....😁👍
That is absolutely beautiful!
beautiful blade. great skill
Nice blade,pattern is awsome ...handle could be/look better(shape,type of wood,to skinny maybe ...i dunno it just doesnt look right)....alot of hard work there....well done..i like it!
Awesome blade!!!
Very Awesome Damascus Knife thanks and Peace be with You
Wow gorgeous blade
Nice Sir beautiful smith
such a cool looking piece, great work!
can you do some with bicycle chains too?
$450k Returns the Lord is my saviour in times of my need!!!
wow this awesome 👏 I'm 37 and have been looking for ways to be successful, please how??
I do know Ms. Susan Jane Christy, I also have even become successful....
Absolutely! I've heard stories of people who started with little to no knowledge but made it out victoriously thanks to Ms. Susan Jane Christy.
@@IntajarRostomThere is her line!!!! under this comment!!!!👍🏻👍🏻👍🏻
Nice artwork, it cuts, yet will it crack on bone when skinning and carving??
VERY nice work!
الله ينور يا جميل ❤
Pattern is very beautiful. Thought I didnt like the process very much using angle grinder all the time.
Amazing looking blade
Браво мастеру, молодец.Золотые руки.👍👍👍👍🔥🔥🔥
Awesome job 👏
very cool, very nice!!
Very nice and no pattern all bye eye well done
VERY BEAUTIFUL , I WOULD BY !!!
One like on your hard work
I like this one. Very nice work.
Nice work thank you
Not bad i love this one❤❤❤❤
Well done dude
This guy has the same handling and control with the grinder that Jimi Hendrix had with his Fender Stratocaster.
I couldn't agree more. I'm not a forger. But I have a 2 handed 7" angle grinder as well as a 5" 1 handed angle grinder. And when something isn't going your way, a lot of times one of those is your friend. Beautiful beautiful blade pattern by the way.
Magnifique couteau j'adore
Awesome job man. I would love to see someone make a real traditional damascus knife, sward, dagar, whatever, the original way. No welders, no grinders, no chop saws, no leaf springs, no chains, no this, no that, just good old steel, a furnace and a hammer plus other tools of the trade they used to use. Not saying your work isn't bad ass because it definitely is.
if you want to see someone do it the traditional way that would take hours maybe even days
@@Demom_King_Azura-alt obviously
@@DumbCarGuy not everyone has time for that is my point so you probably wont get a video of that anywhere
@@Demom_King_Azura-alt all I said how it would be cool to see it
Привет молодец хорошо 🎉🎉🙏🤝💯👏👏
A faça ficou muito linda merecia um cabo melhor a altura da qualidade da faça
Exactly
감사합니다.
Quedó muy bien pela.
Sigo aprendiendo de usted.
❤❤mantap bagus.jika dekat dengan si tukang besi saya mau dibuat kan pisau juga dari bahan baja hss dmo5.yg lebih tebal nya 5mm.❤❤❤❤
Nice job!!!
Nice looking Blade wOw 🤠👍💯🔥
Very good...
Call of duty black ops 3 zombie Bowie knife. You make.
Beautiful
Tony stark did it in a cave! WITH A BOX OF SCRAPS!
Hayırlı günler emeginize saglık
Ottimo 👍
What does the white powder do in the forging process?
It creates a barrier from oxygen, keeping the steel clean and from oxidizing so the welds stick better.
@@mernymernesto9775 thank you
Borax
Cocaine
It’s sugar. It makes the metal sweet😆
You have probably been asked many times previously unfortunately I’m going to ask again,
When you have quenched in the engine oil what is in the can you put it in after please?
Asking because I am teaching myself blade smithing.
Bu sadə qum və taxta tozudur.Soyuması və yağın təmizlənməsi üçün
Great⚡♥
Nice
Shame to loose the pattern on the tang. Could you make handle out of clear acrylic?
Love it .... what is the small piece of metal that was welded in the middle of the 2 bigger pieces that you cut into two? I missed where that one was made. Was it from a previously made piece of steel.... killer looking knife ... thanks
Самое главное, чтобы бумагу резал, остальное не важно.😂
Orang Damaskus Jaman Dahulu Tidak Menggunakan Alat Modern Untuk Membuat Pedang ✍️
Dan Orang Jaman Sekarang, Tidak Memerlukan Pedang Damaskus Untuk Berperang 🤓
Wow evidently I am lucky enough to be reading a video post with all these knife making experts, I've learned so much with all the input from metallurgists and, historians alike ,thank you,thank you, YOU KNOWLEDGE MASTERS! Someone please write Theese wheel keelll ! P.S I will be looking for your videos of crappy knives you made LOL
Excellent
hard work 👍
Cuando podría costar ese cuchillo?
Wat will be the price. Looking fabulous.
Yess❤❤❤❤❤
Мастер👍
Magnificent, you are the king of the grinder!
But I repeat myself again, protect your ears against noise! Just by watching the video, I turn down the sound, so I imagine the noise of the grinder in real life, I use one myself sometimes, and I could never use it without my noise-canceling headphones.
Otherwise, put reusable earplugs made of a sort of silicone, it costs nothing on Chinese sites, and it protects very well from noise. I always have a pair next to the bed if my neighbors make noise in the morning while doing work at home, it also saves me sleep.
Really, think about it, protect your ears, because all the beautiful things you will have made during your life, they will make you deaf. And it is not pleasant not to hear, as much for the one who cannot hear as for those around you who have to speak loudly to be heard. Or like my father who turns up the volume of the television extremely loud until it hurts my ears, he manages to fall asleep with such a loud volume. But for him, it is his years as a DJ and musician that have made him deaf. When you are young, you think you are invincible, but when you are old and deaf, having to wear a hearing aid is not at all pleasant either.
That's a good point and look at the work shop, it's poorly ventilated. He should be wearing a mask with a good air filter as well.
Amazing
Schon erstaunlich aus was man alle Messer machen kann^^.