This CNC machining center is truly awe-inspiring! It fully showcases the remarkable achievements of modern industrial technology. First and foremost, its precision machining capability is absolutely astonishing, capable of achieving complex part machining with micrometer-level accuracy, ensuring product quality and precision. Its high-speed machining capability is equally remarkable, allowing for the completion of numerous machining tasks in a short period, significantly enhancing production efficiency. Thank you for sharing!
This video was AMAZING! TY!!! You showed the entire process from bit selection to set up etc. This was very informative and beautiful to watch. great work!
Incredible seeing the quality you can get in metal with a machine that is more on the woodworking side of the CNC ecosystem. Only some, almost imperceptible, artifacts as evidence of this not being quite as rigid as a metalworking CNC. FANTASTIC job.
I was thinking if you sand blast the whole thing with a really fine grit you'll get a smooth finish, then you could polish the raised surfaces to a mirror sheen which would make it look incredible and accentuate the details in the engraving.
I don't think those are artefacts of a lack of rigidity, rather they're just the result of a lack of accuracy. Because the tooling is so small, and the engagement with the material so light, there's very little rigidity required to make something like this.
I'd also recommend moving on the x axes like you did, but changing to moving among y with the tool change. It's like coloring in both directions with crayons, it provides a more even topology.
That was an amazing work! Saint George of Cappadocia is a powerful entity here in Brazil and see he's image engraved on this medal brings good feelings! Congratulations for your very good work!
That is not Saint George, as you see it has the Ancient Hellenic meanders and the man is naked, thus it cannot be Christian, this is a more original figure. Vellerephontis was what inspired the Saint George myth. Perseus also did something similar. Horus was also in a similar position. This is in greek but you can see the images of the ancient myths and how christianity simply copied the myths. ellaniapili.blogspot.com/2017/07/blog-post_301.html
@@AlehandrosArhangelos Yes you are right! Looking slowly, I can see the naked details you mean... but at first glance I saw Saint George! And yes, you are right again about saying that other cultures have largerly copied Greek culture and that is why Greece is considered the birthplace of modern Western civilization. Thank you very much for explaining and sharing your knowledge!
Very precise job, such a great idea to color the part before you do the finish pass, you can see if it leaves a part untouched due to deformation or movement if vise gets loose from vibrations. Btw. can you share a link to that vise.
man.. that too deep in my heart affected me. I felt that I need to talk to you just to have so much explanation and so many questions on my main. Thank you for sharing this Video
Just amazin man!!! St.george is close to my heart coz I studied in st.georges grammar school and we carried that badge on our chest all the days of our school life. Wish you could make one for me.
I would like to see a close-up of a highly detailed area of the engraving at each stage of the process --- with enough magnification to see the roughness left by the last (0.2 mm) bit.
I have no firsthand CNC experience so please bear with me if it is an ignorant question. Would it be psosible to do the same last pass but make the drill go perpendicular to the first pass and thus remove even more of the tiny jagged steps left behind by the tool? Or go even further and take a pass in each diagonal too? Perhaps getting a totally smooth result?
Hello ! We are one of the leading manufacturers of metal & glass precision CNC machine for engrave metal and grinding glass, we have more than 50 patents for our machinery. You may check about it more on www.ndmachinery.com/ Contact us on: bella@nd-cnc.com Call/Whatsapp: +86 156 3451 3646
Not sure what is the best about this video. Was it the Art? Was it the Programming? Was it the idea of combing both? All I know was it was friggen awesome!!!
Question please Only saw 2 bits 2mm endmill for roughing and v-bit .5 30% Noticed v-bit is flat tip. You used it as a finish bit..how many passes to get this finish. Please Ty. Andy
This is a really detailed high relief design for St. George slaying the dragon. Where did you get it? I've searched images online but nothing is so nice looking.
Here it is... www.google.com/imgres?imgurl=https%3A%2F%2Fupload.wikimedia.org%2Fwikipedia%2Fcommons%2F1%2F1f%2FSaint_George._Line_engraving_after_W._Wyon._Wellcome_V0032137.jpg&imgrefurl=https%3A%2F%2Fcommons.wikimedia.org%2Fwiki%2FFile%3ASaint_George._Line_engraving_after_W._Wyon._Wellcome_V0032137.jpg&docid=bXECk5A-1CIq_M&tbnid=clK6VHK-K3-QxM%3A&vet=1&w=2634&h=2658&itg=1&safe=strict&bih=605&biw=1038&ved=2ahUKEwicyrjP1ODnAhVwIzQIHTYsB9MQxiAoAXoECAEQGg&iact=c&ictx=1
Did you create the 3D model ? If not where did you get it? I have a machine shop and would like to cut some decorative brass but my cad program is not suited for that type of modeling
Hello ! We are one of the leading manufacturers of metal & glass precision CNC machine for engrave metal and grinding glass, we have more than 50 patents for our machinery. You may check about it more on www.ndmachinery.com/ Contact us on: bella@nd-cnc.com Call/Whatsapp: +86 156 3451 3646
Up to now did not have any reply for my question: (can one make a female part as well for embossing seal. what type of router is that and software do you use.) THANKS To HELP !!
luis saire martinez _ Engraving on steel material is okay, but the speed will slow down a lot and there must be water cooling for the end mill. Thanks!
This would be a great way to re-create the engraved pieces in some of the Buddhist temples that need restoring. If it could machine jade pieces then you'd have them covered.😁👍
Hi, i have a piece that needs this level of detail. Is there any way that i could hire your service? Or could you please tell me if you know someone who could do the same kind of work? Thank you.
Great work man. Incredible details glad to watch a satisfying making of this gorgeous coin. Can u please mention the machining time of the job that would have been good way to make us understand that is 8:53 minutes of footage contains hours and hours of work
@@the_jcbone Yeah I know. It probably took over a day total, but even so, for this quality it would probably take any other machine i've seen at least twice as long
Good old ArtCAM. Too bad Autodesk bought and killed it. I was able to revive a Copy of PRO with their help though. Nothing else like it out there for organic design...I have a shop near Orlando where we take on this type of work. Lotasa hours in the seat making these type designs. My hats off to you.
You are right, I used and reselled ArtCAM since version 1.1, there was no vector design yet that time! (I think since 1994-95). Like part of my life :)
I would like to know too. I’m just getting into cnc and I’m trying to machine out small letters using small v bits like you did. How long were the passes?
Hi how long did this project take take with the cnc engraver ? I am looking to get one but still chasing and deciding which one is the The fastest accurate ahd reliable one Let me know thanks
Nice work. every one throw you flowers, I hope they have the CNC similar that you used. I search more info about you, because I have interesting to know more about the used CNC eventually to buy. thanks for your answer.
Hi. What an amazing piece of work you have there and your shop as well. How would you make the engraving drawing like that? Where did the guy you bought it from learn to do that? Which software?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
you were the only person I have seen that showed what bits you used a great video thanks
Thanks, man!
This CNC machining center is truly awe-inspiring! It fully showcases the remarkable achievements of modern industrial technology. First and foremost, its precision machining capability is absolutely astonishing, capable of achieving complex part machining with micrometer-level accuracy, ensuring product quality and precision. Its high-speed machining capability is equally remarkable, allowing for the completion of numerous machining tasks in a short period, significantly enhancing production efficiency. Thank you for sharing!
This video was AMAZING! TY!!! You showed the entire process from bit selection to set up etc. This was very informative and beautiful to watch. great work!
Incredible seeing the quality you can get in metal with a machine that is more on the woodworking side of the CNC ecosystem. Only some, almost imperceptible, artifacts as evidence of this not being quite as rigid as a metalworking CNC. FANTASTIC job.
OkammakO _ Thanks!!
𝗔𝗺𝗮𝘇𝗶𝗻𝗴𝗴𝗴 𝗡𝗲𝘄 𝗛𝗼𝗺𝗲 𝗦𝗺𝗮𝗿𝘁-𝗦𝗮𝘄 𝗗𝗼𝗲𝘀 𝘁𝗵𝗲 𝗪𝗼𝗿𝗸 𝗢𝗳 𝟭𝟬 𝗣𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹 𝗪𝗼𝗼𝗱𝘄𝗼𝗿𝗸𝗲𝗿𝘀𝘀𝘀𝘀 > Woodcarvingmachinee.blogspot.co.uk
I was thinking if you sand blast the whole thing with a really fine grit you'll get a smooth finish, then you could polish the raised surfaces to a mirror sheen which would make it look incredible and accentuate the details in the engraving.
I don't think those are artefacts of a lack of rigidity, rather they're just the result of a lack of accuracy. Because the tooling is so small, and the engagement with the material so light, there's very little rigidity required to make something like this.
Perhaps I'm a bit late to the video but this is a truly fascinating process! It works much like a reverse 3D printer of sorts, thank you for sharing!
До чего дошел прогресс! Спасибо за видео.
This was great to watch, and what a beautiful end product. Respect and amazement!
Thanks, man!
Cho e địa chỉ xem máy
Utterly BEAUTIFUL finished product. Bravo!
For a smoother finishing; using end mill on flat surfaces and ball nose on curvatures can be a good idea
I'd also recommend moving on the x axes like you did, but changing to moving among y with the tool change. It's like coloring in both directions with crayons, it provides a more even topology.
That CNC machine is a real artist....
That was an amazing work! Saint George of Cappadocia is a powerful entity here in Brazil and see he's image engraved on this medal brings good feelings! Congratulations for your very good work!
Um corinthiano por aqui....
That is not Saint George, as you see it has the Ancient Hellenic meanders and the man is naked, thus it cannot be Christian, this is a more original figure.
Vellerephontis was what inspired the Saint George myth.
Perseus also did something similar.
Horus was also in a similar position.
This is in greek but you can see the images of the ancient myths and how christianity simply copied the myths.
ellaniapili.blogspot.com/2017/07/blog-post_301.html
@@janourzua hahaha bem fácil descobrir o time pelo padroeiro, né?! Grande abraço! =)
@@AlehandrosArhangelos Yes you are right! Looking slowly, I can see the naked details you mean... but at first glance I saw Saint George! And yes, you are right again about saying that other cultures have largerly copied Greek culture and that is why Greece is considered the birthplace of modern Western civilization.
Thank you very much for explaining and sharing your knowledge!
@@vitorraul8914 né....??
That is an amazing belt buckle. Some Texan will be proud and lucky to wear that.
Very precise job, such a great idea to color the part before you do the finish pass, you can see if it leaves a part untouched due to deformation or movement if vise gets loose from vibrations. Btw. can you share a link to that vise.
Hello! my friend plz contact us: bella@nd-cnc.com or Whatsapp: +86 156 3451 3646 for CNC machine details.
Hello bebe. Do you guys sell these kind of stuff?
Hello, I need the company name of this cnc lathe or its seller, what is the price of this machine
looked like a puddle of brass drying out when speeded up.love it.
man.. that too deep in my heart affected me. I felt that I need to talk to you just to have so much explanation and so many questions on my main.
Thank you for sharing this Video
Just amazin man!!! St.george is close to my heart coz I studied in st.georges grammar school and we carried that badge on our chest all the days of our school life. Wish you could make one for me.
هذا ابداع الحاسوب اجمل من ابداع الانسان ...بالرغم من ان الانسان هو الذي صنع الحاسوب لكنه تبين انه اذكى وادق من الانسان ...ولااجمل ولا اروع من ذلك ....
I would like to see a close-up of a highly detailed area of the engraving at each stage of the process --- with enough magnification to see the roughness left by the last (0.2 mm) bit.
@Jagger Romeo bot
@Dortha Langefels bot
Đẹp quá. Lại nhanh nữa. Chiếc máy này rất tuyệt.
It is amazing, but is there any finishing techniques that would remove those final engraving lines at all?
Thanks.
supra stone by hand with a profiler and ultra sonic .. yes possible.. but thats a other art
What type of brass is used?
The timelapse so satisfying to watch, brother!
Yeah..Càlem..Thanks bro!
I have no firsthand CNC experience so please bear with me if it is an ignorant question. Would it be psosible to do the same last pass but make the drill go perpendicular to the first pass and thus remove even more of the tiny jagged steps left behind by the tool? Or go even further and take a pass in each diagonal too? Perhaps getting a totally smooth result?
Hello ! We are one of the leading manufacturers of metal & glass precision CNC machine for engrave metal and grinding glass, we have more than 50 patents for our machinery.
You may check about it more on www.ndmachinery.com/
Contact us on: bella@nd-cnc.com
Call/Whatsapp: +86 156 3451 3646
Not sure what is the best about this video. Was it the Art? Was it the Programming? Was it the idea of combing both? All I know was it was friggen awesome!!!
Question please
Only saw 2 bits 2mm endmill for roughing and v-bit .5 30%
Noticed v-bit is flat tip. You used it as a finish bit..how many passes to get this finish. Please
Ty. Andy
Andy. Arroff01@gmail.com
andy roff _ Three passes to get this finish. Thanks for watching!!
*"Dear Santa, I need this engraver"*
pls contact us for buying this machine
@@woodpeckercncrouter What's the website address?
@@woodpeckercncrouter what the name of this machine?and available places?
@@GopiNath-dv7bs this is cnc router with very high precision, casting table
this is cast table cnc router @@GopiNath-dv7bs
What was the purple stuff on the brass before being cut the third time? Loved the video, THANKS !
Wonderful work ! really Nice in working in both working on CNC and timelapse editing and photographing , good job
Mosaddak Helwani _ Thank you.. man!!
Beautiful work.... Do you sell these items ??????
Estudio ingeniería y estas cosas me apasionan, como el diseño en 3d en monedas, los logos de algunas marcas como versace, etc.....
Imagine todo lo que se podría con un diseño único...
Very interesting. I want to know if one make a female part as well for embossing seal. what type of router is that and software do you use.
This is a really detailed high relief design for St. George slaying the dragon. Where did you get it? I've searched images online but nothing is so nice looking.
Here it is... www.google.com/imgres?imgurl=https%3A%2F%2Fupload.wikimedia.org%2Fwikipedia%2Fcommons%2F1%2F1f%2FSaint_George._Line_engraving_after_W._Wyon._Wellcome_V0032137.jpg&imgrefurl=https%3A%2F%2Fcommons.wikimedia.org%2Fwiki%2FFile%3ASaint_George._Line_engraving_after_W._Wyon._Wellcome_V0032137.jpg&docid=bXECk5A-1CIq_M&tbnid=clK6VHK-K3-QxM%3A&vet=1&w=2634&h=2658&itg=1&safe=strict&bih=605&biw=1038&ved=2ahUKEwicyrjP1ODnAhVwIzQIHTYsB9MQxiAoAXoECAEQGg&iact=c&ictx=1
Hello! my friend plz contact us: bella@nd-cnc.com or Whatsapp: +86 156 3451 3646 for CNC machine details.
Did you create the 3D model ? If not where did you get it? I have a machine shop and would like to cut some decorative brass but my cad program is not suited for that type of modeling
iexlrate1 you can find these for sale on Etsy..just look up 3d stl model for cnc router
Wow! Very precise machining. It's a pleasure to watch! :-)
Mindblowing precision... Wow ! Amazing work !
Prefeito! Um grande abraço da brasileira aqui! 🇧🇷
Thank you, for sharing your knowledge with us. Great Video!
Thanks!
do you do custom couins like family crest and last names if yes how much i like a family crest coin made
Enkelt og lage penger og veksle inn i automatiske banker?
That is a beautiful piece. Is there a hd picture of the finished design?
ruclips.net/video/Tx-KH_hRAms/видео.html
The project is truly extraordinary, hopefully it can provide input for beginners like us here, always greetings of success from Indonesia
Hello ! We are one of the leading manufacturers of metal & glass precision CNC machine for engrave metal and grinding glass, we have more than 50 patents for our machinery.
You may check about it more on www.ndmachinery.com/
Contact us on: bella@nd-cnc.com
Call/Whatsapp: +86 156 3451 3646
Have you ever tried to engrave hard metal like stainless steel with this machine?
possible but you'll need to replace the needle very often.
Stainless steel is more tough then hard
Up to now did not have any reply for my question: (can one make a female part as well for embossing seal. what type of router is that and software do you use.) THANKS To HELP !!
That's pretty amazing. My only issue is that you can cast this design with a similar effect. Why not make it in wood?
ruclips.net/video/6vuCz30OTVU/видео.html kindly check this 3D laser machine
One question, can you do the same but engraved on steel material? If this is not possible, would you explain why it is not possible?
luis saire martinez _ Engraving on steel material is okay, but the speed will slow down a lot and there must be water cooling for the end mill. Thanks!
amazing work! ART i would say.... even it is a machine. looks like a liquid substance at one point of the video.
COOLSTUFF
You dont need to cool the bit with water?
St. George slaying the dragon is my favorite image on a coin.
Do you have this for sale somewhere?
Hey quick question what type of router is that and software do you use
how good would a cnc do on a piece of silver? this looks amazing!
Have you tried other toolpath strategies? I'm curious if a spiral strategy for finishing would be nicer on the round part.
dimman77 _ Oh yes. Thank you!!
WOW, this was really incredible! What was the total time for the three machine operations?
I guess him not replying was almost like saying...._"Phuc...you..."_ ?
#micdrop
I cut exact same design in hard maple 8" diameter; took 12 hours.
Used 0.25" EM for rough pass and 0.03125" tapered ball nose for finish pass.
Could you tell me please what is the most important specs for a cnc machine to be able to do a clean and accurate work like you did
This would be a great way to re-create the engraved pieces in some of the Buddhist temples that need restoring. If it could machine jade pieces then you'd have them covered.😁👍
Powdered jade is a carcinogen. Gotta be careful with that stuff
It depicts the thracian knight killing the dragon. A picture that later St. George was depicted in. Very beautiful design and sculpture!
Mishu Grosu _ Thank you!!!
Just amazing! How long did the whole CNC process take?
Hi, i have a piece that needs this level of detail. Is there any way that i could hire your service? Or could you please tell me if you know someone who could do the same kind of work? Thank you.
Great work man. Incredible details glad to watch a satisfying making of this gorgeous coin. Can u please mention the machining time of the job that would have been good way to make us understand that is 8:53 minutes of footage contains hours and hours of work
Hello! my friend plz contact us: bella@nd-cnc.com or Whatsapp: +86 156 3451 3646 for CNC machine details.
Do you make custom pieces if a drawing can be sent to you
muito bom cara da hora não acredito em são jorge mas o trabalho em si é da hora parabens
Foda se o Curintxa....!! kkkkkkkkkkkkkkkkkkk
what bit are you using?
Superb work. Awesome edition
Thanks! Mirock
phucnguyen CNC sir machine rate
@@phucnguyenCNC would you like to sell that, can it be designed as locket to chain
Have you do dial watch ?
I have two questions, would it be possible to create a reverse design with ease? Secondly, what would the price be for 2 of those?
1: yes
2: too much
..re price; you know what they say '..if you have to ask..'
How many folks turned the sound down or off?...I did but damn it was very cool though....
What was the total machine time?
Mishn0 no doubt at least two days of constant run
Where can i buy v bit tool, and whats the full name of that tool?
I found some in my country but is all for paper /gypsum /mdf boards. Is there any for hard metal like inox?
Hello! my friend plz contact us: bella@nd-cnc.com or Whatsapp: +86 156 3451 3646 for CNC machine details.
Did u have a STEP file of this coin??
it's amazing!
A chạy bằng dao gì đó.Giới thiệu em biết với
Can we create on gold too?
It would likely be much cheaper to produce this in brass, then have it gold plated.
Can you fine sandblast it to smooth out the ridges?
What the hell, I had no idea a cnc machine could be so precise, so fast.
You know that's mostly not real time?
@@the_jcbone Yeah I know. It probably took over a day total, but even so, for this quality it would probably take any other machine i've seen at least twice as long
1.6mm per min is excruciatingly slow.
@@iancrossley6637 What do you mean 1.6mm per min? the tip is moving more like 5cm per second.
These cnc was accurate and precise as the day u were born back in 1970 and 80s .only thing differ is better software .
hello sir i would like to buy one of these big coins how much would it cost in brass?
Wow, that was fantastic ! Nice job !
Fletcher Handcrafted Guitars _ Thank you sir!
Cool time lapse of your project. I've read comments and watched your other videos. For this or the Lion in brass, how long is the run time for this?
I love your work. What spray paint do you use? And for what that paint?
I think to show the resolution of the last drill
Auto
Should be red steel marker
is that some kind of paint or lubricant that has been applied to the final pass?
Good old ArtCAM. Too bad Autodesk bought and killed it. I was able to revive a Copy of PRO with their help though. Nothing else like it out there for organic design...I have a shop near Orlando where we take on this type of work. Lotasa hours in the seat making these type designs. My hats off to you.
28
You are right, I used and reselled ArtCAM since version 1.1, there was no vector design yet that time! (I think since 1994-95). Like part of my life :)
maybe you should look up the austrialiian guy roger he uses both maybe he can give you some tps
How loud are these machines? Can I put one in my basement and not be bothered by the noise on the main floor of my house?
Hi,
Great video. I was wondering why you used a V bit rather than a ball end mill? Wouldn’t it give you a smoother finish?
V bits give better finish on flat parts, balls on curved surfaces. I guess he wanted the flat parts to be shinier.
Manfred Knorr _ Because the details of this model are too small, can't be engraved with ball end mill.
How long it takes to finish that job? How many hours it takes ?
Very nice work. I have a 7 Oz. Silver round I want to change. I haven't decided to what yet.
Very nice. I would like to see you import the image and how you convert it to 3d for engraving. Is that brass or copper? Copper is so hard to cut.
That's brass. I mistakenly recorded. Thank you, Paul Devey!
How do you grip the brass piece on the base at 0:29, what is the mechanism please?
How long did it take to finish ?
cel puțin 18 ore
Ilie Zota 😂😂😂😂
@@tomasthesinner1080 it's not funny. If you use a mill of 0.1 for cleaner details take longer
Sounds like you got some nice speeds and feeds. Bravo
Nice! How many hours did it run total? Thanks
I would like to know too. I’m just getting into cnc and I’m trying to machine out small letters using small v bits like you did. How long were the passes?
Hi how long did this project take take with the cnc engraver ?
I am looking to get one but still chasing and deciding which one is the The fastest accurate ahd reliable one
Let me know thanks
I am surprised that you didn’t use a small ball end mill on the finishing pass. Anyways looks good.
Nice work. every one throw you flowers, I hope they have the CNC similar that you used. I search more info about you, because I have interesting to know more about the used CNC eventually to buy. thanks for your answer.
?
Hi. What an amazing piece of work you have there and your shop as well. How would you make the engraving drawing like that? Where did the guy you bought it from learn to do that? Which software?
Nice project and video. How did you secure the brass plate to the vise as it doesn't seem to be between the vise jaws? Are jaws magnetic?
Josh Lopez _ Oh no. It is clamped very little (1.5mm), at the bottom. Thanks for watching!
nice what you didn't use ball nose bit
anh cho em hỏi đoạn anh phải sơn phủ một lớp đỏ rồi tiện tiếp lên trên để làm j ạ
Để dễ kiểm tra lỗi gãy dao e.
@@phucnguyenCNC em cảm ơn
how long it took?
Pawel Olek _ About 6 hours. Thanks for watching!
Which camera are you using ?
jisu park _ Sony A6500 and RX100iii.
Класс! Поделитесь 3д моделью пожалуйста...👍
Мне тоже ! можно прям очень надо ! Can you share 3d model please i really need it ! my instagram - inkovstefan
How long it took ????
It would have been neat to see it with a high polish..
St. George >> Hats off for choosing the sculpture, Well done
Есть возможность изготовить клише для кожи под заказ??
ตักแตน
How long did it take to do this cnc/cad program? What would it cost me if i wanted to special order something similar