Window regulator broke on Friday night. Could hear what were the cables breaking. On removal found to be frayed and rusted through, bought replacement window regulator kit from car europarts for £105 discounted to £65! Black Friday deal! Then 4 hours on Sunday morning did this with the panel and the other video to fit the new regulator. Thanks so much. Was fiddly to put back together but went slow and steady and taking pictures as I went all went back perfectly. Saved me a couple of hundred £££ labour alone without doubt. Anyone fairly competent can do this following these steps.
Thanks so much for this video, and your window regulator one. Just done the whole job this evening and everything was clear using these. I now have a window which closes, and opens again... and it saved me a small fortune. Thanks again
Cheers for your video, I want to take the door cards off to strengthen them for aftermarket speakers as well as deaden the door skins. This is about the only RUclips vid that shows you all you need to take them off fully. Useful hints on the airbag sensor, saves a trip to the Seat garage!Thank you.
Thanks for the two helpful videos! Thought my car breaks before I also have to change the other window regulator - but after all the years car is still running but the window came down and I had to change it. It's quite tricky and takes longer as one thinks, esp. when heavy rain make you stop. Second person can help bringin it back in the right place.
Thanks so much for this. I have a Toledo 3, same design doors. Just lubed the regulator cables and guides with silicone spray, window now working fine. The electric windows are a weak point on these cars.
There's several important parts you left out or edited out. One of the screws that holds the panel also holds that metallic track where the window rides. So, there's 3 things being titghened: door panel, door frame and metallic track...all by one screw. They need to be align. Use a flaslight. Near the lock there's a plastic part that's weirdly placed and needs some special care. After removing all screws you really need to pull up and the all panel....almost seems you have to push too hard. The "putting it all together" is even worse. You need finger strenght to fix manually sone tabs sonthe others don't come out. The top part near the window need to be fist-hammered. I swear. Make sure the screw holes are align before putting them. Don't force them. The best mind set is both: be confident and have a friend you can call as a plan B. Now i understand why mechanics complain about cat design and engineering. Jesus!
Thanks, Mate it was very helpful. I would never ever find it myself how to get to this damned side window and pull it up, until some pro fixes the broken mechanism. Piece of crap, which is, btw. Thanks again!
Hi! That's not really how this was designed to be done. This is a door trim module, which means that the door trim comes with all the mechanisms attached to it. You don't need to do that much. You need to loosen the screws to the body in white and the glass from the window lifting mechanism and then you need to pull up for the hooks on the perimeter to be free. Afterwards it takes a bit of coming up and down and out to allow the window lifter mechanism to come oir of the hole of the body in white. Once you have it all out in one piece, you can repair any of the mechanisms. Btw. The strange attachment is a buffer for crash. The cones collapse in a way that your spine isn't broken during a side crash. I hope that helps.
Thanks for the video, can you tell me maybe if you know how I can block the window? Since the crane stopped working and the mechanic that should replace it has time only in a few weeks. Thank you!
Hello. Is it necessary to disconnect the battery before disassembling the upholstery, so that when unplugging the airbag sensor it does not report a fault in the airbag system, is it enough to not turn on the ignition when the sensor is open ???
Thanks for the vid. One question, in order to change de front speaker ¿Do i have to strip all the door, or can it be done just by pulling the speaker cover?
Hej Michael. Jeg tager den lige på Dansk. Tak for dit svar. Du når 6.45 minutter hen i din video og vups, så er panelet monteret. Min bil er en 2005 Altea. Jeg kan se at kablet til dørhåndtaget er monteret lidt anderledes i min. Som du også nævner det, kan jeg heller ikke se formålet med den apendix der sidder ved låsen, og hvordan den skal sidde. I bunden sidder der 2 løse beslag som jeg ikke har styr på. Kan du huske hvad du gjorde ved apendixen og beslagene i bunden.
+Mughal Piru There are two screws, the other is underneath the window contacts panel. You can se this video it should be the same as the Altea. ruclips.net/video/l9we1IA_zS8/видео.html
Hej Michael Ved du om det er samme princip på en alm Altea? Skal hva skiftet min tweeter til et med komponent sæt, men har hørt at ruden sidder fast i dør beklædningen, eller noget i den still. Håber du Ka hjælpe
+Michael Krøse Hej Michael & Lamin. Nu er det godt nok 2 mdr siden i har skrevet, men jeg sidder med samme udfordring. Jeg skal skifte tweeter på min Altea. Og forsøgte at tage beklædningen af, men løb ind i det problem som Lamin beskriver med at døren sidder fast i vindues rammen, har i erfaring med at skifte tweeter? Jeg kan sagtens se at højtalleren nede i bunden er nem, men tweeteren er ikke nem. Hjælp ? :-) Og tak Michael for en super flot guide !
+Thomas ilsø Hej Thomas Lad vær med at skifte diskanten dem er limet fast til dørbeklædningen, såfremt du vælger at pille den af, så skal du finde en i samme størrelse som org, tweeter og denne skal så limes fast eller monteres ovenpå den gamles placering og det tror jeg bliver noget lort, det jeg har gjort efter at have ødelagt den ene, er at afmontere det stik der sidder til tweeteren og så har jeg fået lavet en løsning hvor de sidder i rude trekanten til sidespejlet, så sidder de lydmæssigt rigtig og peger i lytter retning. Hvilket komponet sæt har du købt?
+lamin camara Jeg har fået fat i JL Audio cs3 650 komponent, som i mine ører lyder suverent ! :-) Men jeg har nu ikke fået dørbeklædningen af endnu. Fordi som du beskrev, så sidder der 4 arme fra vindues ophænget direkte ind i beklædningen, og det besværlig gjorde det så meget at jeg opgav til sidst. Så nu er jeg lidt på herrens mark, til jeg lige finder lidt hjælp :-)
Hi Michael, Thank you so much for doing this video, I followed it to do my drivers door and it made it a lot less daunting a job! I found I could leave a lot of the wiring in place to make it easier and would recommend the same for others. Did you find it tricky to the get the left regulator arm screwed in place? Doing it through the panel I found the screw holes needed to be forced higher up than they wanted to be?
+Jason Blay You are welcome. It depends on whether you need to remove the door panel completely how many wiring you must remove. I do not know what you mean by regulator arm, I had no problems with screws holes.
+Michael Krøse I changed the regulator for the window and it was one of the metal guide rails that was the problem. It was difficult to get it to line up for the long screw on the bottom of the door! Thanks again.
disassembling is easy. assembling is horror. I have done many audi, vw, skoda, and when I did altea/leon I said never again will touch doors or locks in this cars. owner should do it himself to see spanish way of engineering.
Thanks for the video Min: 5:05 you need remove the 3 screws of the door´s lock too, and you remove the clip inside the door handle, because the plastic is fixed there... drive.google.com/open?id=1ZNS0UNFYNVQjPUjmxCJ3YTaLWF8jfhrp I upload the document to my drive, enjoy!!!
+Michael Krøse fedt mange tak for hjælpen rigtig fed guide, har nu fået bekræftet af seat Amager, at det er samme type opsætning på begge modeler, tak for dine hurtige svar
Window regulator broke on Friday night. Could hear what were the cables breaking. On removal found to be frayed and rusted through, bought replacement window regulator kit from car europarts for £105 discounted to £65! Black Friday deal! Then 4 hours on Sunday morning did this with the panel and the other video to fit the new regulator. Thanks so much. Was fiddly to put back together but went slow and steady and taking pictures as I went all went back perfectly. Saved me a couple of hundred £££ labour alone without doubt. Anyone fairly competent can do this following these steps.
Thank you so much for these videos!!
I have to do the window regulator on my Altea tomorrow.
These two videos have saved me a TON of time!!
Thanks for this excellent video, I've just this minute replaced my window regulator and I couldnt have done it without it.
Thanks, and great to hear that you could use my guidance
Thanks so much for this video, and your window regulator one. Just done the whole job this evening and everything was clear using these. I now have a window which closes, and opens again... and it saved me a small fortune. Thanks again
you're welcome,
Cheers for your video, I want to take the door cards off to strengthen them for aftermarket speakers as well as deaden the door skins. This is about the only RUclips vid that shows you all you need to take them off fully. Useful hints on the airbag sensor, saves a trip to the Seat garage!Thank you.
You're welcome and I am glad that my video can help you to :-)
Thanks for the two helpful videos! Thought my car breaks before I also have to change the other window regulator - but after all the years car is still running but the window came down and I had to change it. It's quite tricky and takes longer as one thinks, esp. when heavy rain make you stop. Second person can help bringin it back in the right place.
Thank you Michael. I needed to remove the door panel in my Seat Altea in order to fix the door lock mechanism. Your video was really helpfull.
I'm glad to hear that the video can be used :-) I have repaired a couple of my Locks to :-)
Great thanks for this detailed video! Seat Altea Freetrack from Russia.
Thanks so much for this. I have a Toledo 3, same design doors. Just lubed the regulator cables and guides with silicone spray, window now working fine. The electric windows are a weak point on these cars.
Thanks for the video mate
There's several important parts you left out or edited out. One of the screws that holds the panel also holds that metallic track where the window rides. So, there's 3 things being titghened: door panel, door frame and metallic track...all by one screw. They need to be align. Use a flaslight. Near the lock there's a plastic part that's weirdly placed and needs some special care. After removing all screws you really need to pull up and the all panel....almost seems you have to push too hard. The "putting it all together" is even worse. You need finger strenght to fix manually sone tabs sonthe others don't come out. The top part near the window need to be fist-hammered. I swear. Make sure the screw holes are align before putting them. Don't force them. The best mind set is both: be confident and have a friend you can call as a plan B. Now i understand why mechanics complain about cat design and engineering. Jesus!
Very, very helpful !!! Thank you ! 🙏
Min elrude valgte at stå af så den video har været en kæmpe hjælp.. tak for det
Andreas Degn super at du kunne bruge video.
Thanks, Mate it was very helpful. I would never ever find it myself how to get to this damned side window and pull it up, until some pro fixes the broken mechanism. Piece of crap, which is, btw. Thanks again!
Hi!
That's not really how this was designed to be done.
This is a door trim module, which means that the door trim comes with all the mechanisms attached to it.
You don't need to do that much. You need to loosen the screws to the body in white and the glass from the window lifting mechanism and then you need to pull up for the hooks on the perimeter to be free. Afterwards it takes a bit of coming up and down and out to allow the window lifter mechanism to come oir of the hole of the body in white.
Once you have it all out in one piece, you can repair any of the mechanisms.
Btw. The strange attachment is a buffer for crash. The cones collapse in a way that your spine isn't broken during a side crash.
I hope that helps.
Thanks for the video, can you tell me maybe if you know how I can block the window? Since the crane stopped working and the mechanic that should replace it has time only in a few weeks. Thank you!
You can tape it from the inside
@@MichaelKroese Thanks!
Thanks it helped a lot man!!
Super video toll erklärt viele dank 👍👍👍
Hello. Is it necessary to disconnect the battery before disassembling the upholstery, so that when unplugging the airbag sensor it does not report a fault in the airbag system, is it enough to not turn on the ignition when the sensor is open ???
Yes it is enough to not turn on the ignition when the sensor is not connected
Thanks for the vid. One question, in order to change de front speaker ¿Do i have to strip all the door, or can it be done just by pulling the speaker cover?
You don't need to strip the door
removing the speaker cover only
Thank you so much. It`s very usefull and helpfull move with everything what I need to do myself. Great job.
Thanks
Would I have to do this to fix the left side mirror back into place? It's abit loose and I'm not sure weather I have to open the whole thing or not
On a seat ibiza *
Thank U so much!
This is great thanks for the video.
Hej Michael.
Great video, but how do you assemble the panel again, the easy way.
ruclips.net/video/Cl850ohKYnE/видео.html
Hej Michael. Jeg tager den lige på Dansk. Tak for dit svar.
Du når 6.45 minutter hen i din video og vups, så er panelet monteret. Min bil er en 2005 Altea. Jeg kan se at kablet til dørhåndtaget er monteret lidt anderledes i min. Som du også nævner det, kan jeg heller ikke se formålet med den apendix der sidder ved låsen, og hvordan den skal sidde. I bunden sidder der 2 løse beslag som jeg ikke har styr på. Kan du huske hvad du gjorde ved apendixen og beslagene i bunden.
tnx for the video really helped me
yes your right, but driver door handle only seems to have one screw, can't find the second one
+Mughal Piru There are two screws, the other is underneath the window contacts panel. You can se this video it should be the same as the Altea. ruclips.net/video/l9we1IA_zS8/видео.html
+Michael Krøse, found it under the window switch thanks, now I need to know how to dismantle the driver wing mirror, need to get behind the mirror.
+Mughal Piru , Maybe you can use this video ruclips.net/video/504cAwlQkvY/видео.html
Do you know how you take the driver door panel of, thanks
yes it only the dor handles There is a little different
thanks for help :)
thx for all
Hej Michael
Ved du om det er samme princip på en alm Altea? Skal hva skiftet min tweeter til et med komponent sæt, men har hørt at ruden sidder fast i dør beklædningen, eller noget i den still. Håber du Ka hjælpe
+lamin camara Jeg vil mene det er det samme, og du behøver ikke at fjerne dørbeklædningen, da højtalerne er lige til at pille ud uden :-)
+Michael Krøse Hej Michael & Lamin.
Nu er det godt nok 2 mdr siden i har skrevet, men jeg sidder med samme udfordring. Jeg skal skifte tweeter på min Altea. Og forsøgte at tage beklædningen af, men løb ind i det problem som Lamin beskriver med at døren sidder fast i vindues rammen, har i erfaring med at skifte tweeter? Jeg kan sagtens se at højtalleren nede i bunden er nem, men tweeteren er ikke nem. Hjælp ? :-)
Og tak Michael for en super flot guide !
+Thomas ilsø Hej Thomas
Lad vær med at skifte diskanten dem er limet fast til dørbeklædningen, såfremt du vælger at pille den af, så skal du finde en i samme størrelse som org, tweeter og denne skal så limes fast eller monteres ovenpå den gamles placering og det tror jeg bliver noget lort, det jeg har gjort efter at have ødelagt den ene, er at afmontere det stik der sidder til tweeteren og så har jeg fået lavet en løsning hvor de sidder i rude trekanten til sidespejlet, så sidder de lydmæssigt rigtig og peger i lytter retning. Hvilket komponet sæt har du købt?
+lamin camara
Jeg har fået fat i JL Audio cs3 650 komponent, som i mine ører lyder suverent ! :-) Men jeg har nu ikke fået dørbeklædningen af endnu. Fordi som du beskrev, så sidder der 4 arme fra vindues ophænget direkte ind i beklædningen, og det besværlig gjorde det så meget at jeg opgav til sidst. Så nu er jeg lidt på herrens mark, til jeg lige finder lidt hjælp :-)
Hi Michael, Thank you so much for doing this video, I followed it to do my drivers door and it made it a lot less daunting a job! I found I could leave a lot of the wiring in place to make it easier and would recommend the same for others. Did you find it tricky to the get the left regulator arm screwed in place? Doing it through the panel I found the screw holes needed to be forced higher up than they wanted to be?
+Jason Blay You are welcome. It depends on whether you need to remove the door panel completely how many wiring you must remove. I do not know what you mean by regulator arm, I had no problems with screws holes.
+Michael Krøse I changed the regulator for the window and it was one of the metal guide rails that was the problem. It was difficult to get it to line up for the long screw on the bottom of the door! Thanks again.
+Jason Blay It is very difficult to get it on, but my fitted well, maybe because I was orginal part
disassembling is easy. assembling is horror. I have done many audi, vw, skoda, and when I did altea/leon I said never again will touch doors or locks in this cars. owner should do it himself to see spanish way of engineering.
Thanks for the video
Min: 5:05 you need remove the 3 screws of the door´s lock too, and you remove the clip inside the door handle, because the plastic is fixed there...
drive.google.com/open?id=1ZNS0UNFYNVQjPUjmxCJ3YTaLWF8jfhrp
I upload the document to my drive, enjoy!!!
Thanks, I spent a long time trying to pry it off. Where did you find the diagram?
Ahh ok, men jeg mener diskanten der sidder oppe ved håndtaget,
+lamin camara OK så skal du have dør beklædningen af, men har aldrig hørt om nogle hvor ruden sidder fast i dørbklædningen.
+Michael Krøse fedt mange tak for hjælpen rigtig fed guide, har nu fået bekræftet af seat Amager, at det er samme type opsætning på begge modeler, tak for dine hurtige svar
lamin camara
tama
ya
PANEL DELANTERO DERECHO
Sag mir, dass du Deutsch bist, ohne mir zu sagen, dass du Deutsch bist: