Installing Bucket Seats in the Nissan Hardbody D21 | Flake Garage Pathfinder Seats
HTML-код
- Опубликовано: 15 авг 2024
- Today we are going to the junkyard and get a pair of bucket seats from a 94 Nissan Pathfinder to try to install in Bryan's Nissan Hardbody D21. We managed to get lucky and find a seat that needed some TLC. If you need the small cushion pad, you can pick it up here amzn.to/3jVcdGk (Affiliate)
Buckets seats from any 1987 - 1995 Nissan Pathfinder are straight bolt on for the Hardbody
Mixture for wet/dry vacuum:
1/2 cup of detergent
1 gallon of hot water
That's all you need to clean your interior and leave it smelling good.
→ Support the channel here: www.flakegarag...
→ Follow us on Instagram: / flakegarage
→ As an Amazon Associate I earn from qualifying purchases.
→ Check my Amazon page: www.amazon.com...
Intro (0:00)
Junkyard Speed Run (0:35)
Bucket Seat Overview (1:10)
Wet / Dry Vacuum (1:54)
Cleaning Seats (2:53)
Clean & Painting Trim (5:04)
Bench Seat Overview (6:25)
How To Remove Bench (7:08)
Floorboard and Seat Belts (8:18)
Bolt Locations (9:00)
Seats Installed (10:34)
Tips on Install (11:00)
Before & After (11:52)
Final Thoughts (12:12)
Disclaimer:
Due to factors beyond the control of Flake Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Flake Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flake Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flake Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flake Garage.
#nissan #hardbody #bucketseats #d21 #pathfinder #seats #bucketseatinstall #nissanhardbody #nissand21 #howtoinstallbucketseats #hardbodybucketseats #nissanhardbodyseats #howtoremovebenchseat - Авто/Мото
The color of those seat goes well with the walnut steering wheel and the walnut shift knob, nice score.
Yes, they matched perfect! Thank you again for sending the shift knob!
Soul Glo on those headrests
That is what I did for my 1991 D21 Hardbody
Looking forward to more videos! Have a D21 I’m working on
Hows your truck going?Check out my D21 if you like rust
What a score man! I’ve been dying for a set of red buckets. To match the red interior in mine. 🤙🤙 keep your the good work guys!
They have been working out great! Keep an eye on the junkyards, a set might pop up
After doing 10 straight tours of COD, this old vet can relate to the back pain. Nicely done fellas.
Apex legends is our back pain provider of choice
Wow! Those seats look totally different! That tip about the wet/dry vac from Home Depot tho!!!!
Thank you Tamara!
The sun is good for killin germs and such but down south you could put them in and that water would evaporate PDQ when the interior raises to the temp of an easy bake oven in the summer.looks great. I gotta do this. Short wife driving lessons. Great video. Thx for posting.
The south definitely gets hot! Glad you liked the video
I just bought a white 97 hardbody and i automaticly ordered some stickers for it from you guys💪🏽
Nice just bought a 95 hardbody, have to get some stickers to yo
Nice production, guys! Thanks!
Thanks . Have a ‘87 d21 . Im doing this . Any buckets from ‘87 - 95 Nissan Pathfinder. 👍. Brian is already standing tall . Great job and info. P.s i want that penney i saw 👀… under the seat ..
We’ll save you the penny lol
Love the job you guys did great job
You should use dawn dish soap it works wonders.
Since you guy did such a great job cleaning the seats, you should have thought of getting some cloth paint and freshen up the color a little or change it to another color.
We actually like the red color in the truck so we are ok with how it looks right now
Nice work guys !
That's awesome dudes 👏!
Dude don't be cheap take them to a upholstery place. You are so lucky to have found them in the first place.
But why? They look good red and got cleaned up pretty good lol
The previous owner of truck farted a lot and destroyed bench seat. 🤣🤛
🤣🤣
what hub is that he used for the steering wheel? not been having much luck finding one for my d21
Hey @flakes garage I recently bought a 1994 Nissan d21 hardbody and I also bought similar wheels to yours, I’m now stuck on deciding the tire size. What size tires are on your d21? And do you recommend stretch?
We rocking a 205/40/16 on the wheels and have a mild stretch. It’s been working out great for the hardbody. Depends on the size of your wheels but a slight stretch ain’t bad or could always go for the meaty look but might have to watch for some rubbing
Nice swap straight out, where did you get the detachable steering wheel?
Visit here for part details flakegarage.com/pages/nissan-hardbody-d21
Hey mate, great video! What steering wheel and hub you got there?
Links to parts here flakegarage.com/pages/nissan-hardbody-d21
Would 95 nissan pathfinder bucket seats be a direct fit on my 95 nissan pickup xe single cab
Yes the 95 pathfinder is the last year you can straight swap. The 96+ will not fit
i bet you could run by the car wash and spray with high pressure and dry in the sun cheaper. jmo no smoke please.
You'll just need to watch out for any electronics in the floor. I believe there's an abs sensor module. Besides that, you could potentially rinse it out yes
Where can I find a front a rear chrome bumper for my 1986 Nissan truck
You'll have to keep looking at ebay, rockauto, amazon for any of those to pop up. These trucks are old and most things are just not in one site if they have them at all
Do you know if you can swap a 91 nissan bucket seat into a 89 mazda b2200?
it wouldn't be a straight swap, you'd need to modify the bases
Or do you know where I can order them new
Yo guys, that looks good!are you going to change rest of the interior to red?
I don’t know if Bryan will go full on red interior yet haha
@@FlakeGarage It’s Porno “ RED “ .
Will 2001 Nissan pathfinder seat fit on 1997
No
Did you have to buy more bolts because you’re going from 4 to 8? Or did you use the existing ones that were already bolted down when placing the seat bracket on top? I plan on doing the same conversion.
That’s a great question and you will need extra bolts. Since we got these seats from a junkyard, we took the bolts from the pathfinder donor with us and used them here. If you find them like us, definitely take the bolts, if bought from someone ask for them or you’ll have to get them at the store
@@FlakeGarage Thank you for responding. This helps a lot!
Would the center console for the pathfinder fit between the seats of the truck?
Yeah I think it would if it’s the same transmission as your truck
Any recommendations for seats for a 720 singel cab I'm 6.1 ans I need some seats that won't take up much space
These pathfinder seats are not bad for a 6 ft guy talking from experience but if you wanted to have a little extra clearance you might have to go with a custom lower profile seat or perhaps a skinnier factory seat.Stone broke garage here on yt has a 720 and might be able to help you better with that question
What year was the pathfinder?
94 pathfinder, it's on the description
I got buckets from a 95 and I notice I sit kinda higher vs the bench, do you have the same issue?
Yes the buckets do sit a bit higher compared to the bench unfortunately. Most likely because of the padding on the bottom of the seat
What shift knob are you rocking ?
Thanks
Custom made by one of our viewers! His name is skrapr_arts on instagram
What size socket you need to remove the bench seat going to do the same to my hardbody 😅
I think it was a 14mm socket for the bench
@@FlakeGarage thank you so much 🙏
Is there any noticable difference in legroom or headroom?
Bryan feels like there is more legroom compared to the bench and a little more headroom. I felt like it did make you sit higher than before
@@FlakeGarage Thanks!
I live in chicago i had to ebay them it was$500
Wow! Where they mint condition? That seems a bit high but then again these parts are getting harder to come by
I see
Are yall brothers?
Good junkyard score! How come 96+ years are different tho, body styles look the same to me. Its 98 where they changed to d22.
They might look similar but from 96-00 is different specially when it comes to the seat mounting points. They are more closely related to the frontier than the hardbody. Specially on the point close to the trans tunnel. Can always give it a try but from what we seen, it will not fit
How much for the bench
It's been long gone
@@FlakeGarage you know where I can buy one
@@Daniel_lowcali junkyards, marketplace or local groups on facebook
What bolts on to the mazda 1991 xtra cab?
You can straight bolt other extra cab bucket seats or the bench from the regular cab. Anything will have need custom brackets
@@FlakeGarage them wheels are same hub as mazda? Are the nissan hub bore same or bigger then mazdas?
@@FlakeGarage i have dodge neon buckets on my 91 xtra cab i dont know if they swapped out rails or??? Never really looked into it
Hub size is the same I believe as the Nissan and Mazda. Those seats are not straight swap so they might have added the brackets to it or made new bolt holes for them
@@FlakeGarage 👍 thank you.
What year pathfinder did you pull those seats out from?
They were off a 93 pathfinder
Damn homie at least clean it up before putting seats