Easy way. Tightened without the black plastic thing just alittle then put it together by raising the spring legs in it’s appropriate positions and tighten finally. Works great.
I think my spring is broken😕 I put it on but one of the spring legs keep coming off the area it needs to stay in, so it goes all crazy when I turn it on
I promise u wasn’t lying about that rag…I was doing it without it then I heard u say it’s the step most ppl like to avoid but mane as soon as I used it it was so much easier!
Thank you so much I'm a full-time student and Barber college, took my clippers apart today to sharpen the blades and completely failed putting them back together thank you for your video
Fellas an easier way to do this is to put the spring and the blade holder in place first. Then bend the prongs back on the spring and slide the blade in. The spring is strong enough to snap right back in place. It’s way easier and you know it’s right bc that spring instantly pops into place.
I have a Wahl Lithium Ion 2.0 that I was cleaning and I took it apart too far. That spring popped out and I can't figure out how to get it back in. Any suggestions?
I was struggling to do this following the video, the spring would just keep popping out. I took everything off, then screwed in the bottom holder where the spring goes into, but halfway tight. Then turn it around so it actually faces the opposite way and not towards the blade. Slide the spring underneath and it should sit there, then you push this piece and the spring all the way round to face the right way up. Once that’s done, tighten the screw all the way and thats the hard bit done. Then just lift the 2 spring edges with a flathead screwdriver and slot the blade in underneath 2:04
You can’t really see anything you see most of your hands but the rest looks foggy didn’t really help me but thank you for sharing explain things very well😊
They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades
They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades
@@FadeMasterLos thanks for reply . I figured out in the end . There’s no screw that holds in spring it’s a case of just fitting spring into the holes and then snapping back on the unit while holding blades down firmly and screwing down .
Video didn’t help as the rag did nothing lol. I managed to get them in by putting the piece that goes on the spring backwards loose enough to slide the spring under it. I turned those around to how they are suppose to face and lifted the springs with some scissors so I could put in the black blade. You do have to insert the spring is shown above in order for them to work properly again!
i will describe how to do it since this guy doesnt watch what he record and doesnt show anything , the easier way for me was to put the blade it self for half so it can easier be. so what you need to do is put the string inside where it suppost to be then the bart with screw you put on top of the string , so the string is under the thing you need to have some force then you screw the bolt in and it will work fine
Bro this is a major F YOUUUUUUUUUU TO BABY liss bro ICANT EVEN USE THE TRIMMER AFTER TAKING IT APART TO SHARPEN IT THEY REALLY THINK THEY A FOREIGN CAR I FCKING HEATED YALL LUCKY IM NOT ASS OUT NOW I GOT 2.0s cuz THATS RIDICULOUS
babyliss pros are absolute garbage, i bought 2 of them and the bullshit spring kept slipping out of position on both, they over complicated something that doesnt need to be that difficult to fix, the moment that spring comes out thats practically it for those clippers, unless you make your own makeshift spring to hold it in place. theres cheaper clippers on amazon that look like babyliss that dont even have that issue
You guys need to know how to make a video because half the things you were doing was impossible to see and you took it away too quick please get somebody else to do your videos
I was disappointed because the video wasn’t focused, but if you actually listen and watch the full video it’s the best way
Thanks for having half the video out of focus, really helps!
😂
Shit didn’t work at all
Stfu bro be thankful someone took the time to help us that don’t know. Smh
Real shit
Ong I still can put shi together
So glad I aint the only one having issues with the spring, appreciate you 🙏
Did you watch the footage you captured? It's completely out of focus.
Didn’t see anything 😭 might wanna make another video focused
Easy way. Tightened without the black plastic thing just alittle then put it together by raising the spring legs in it’s appropriate positions and tighten finally. Works great.
After two hours thank you
after erasing my finger tips, thank you !!
What is “the black plastic thing”
goated
Bro on my momma this worked 😂😂😂😂 THANK YOU SO MUCH!!!!
This video was helpful thanks! I had gotten stuck and didn't want to break anything.
Man just saved my life with this video
I think my spring is broken😕
I put it on but one of the spring legs keep coming off the area it needs to stay in, so it goes all crazy when I turn it on
Man the exact same thing happens to mine, did you find out?
I promise u wasn’t lying about that rag…I was doing it without it then I heard u say it’s the step most ppl like to avoid but mane as soon as I used it it was so much easier!
Thank you so much I'm a full-time student and Barber college, took my clippers apart today to sharpen the blades and completely failed putting them back together thank you for your video
The quality was trash for me to see exactly what u did
Really helps that I can’t see cause of the blur great job 👏🏼
Does loudness on my trimmers depend on the spring only?
Fellas an easier way to do this is to put the spring and the blade holder in place first. Then bend the prongs back on the spring and slide the blade in. The spring is strong enough to snap right back in place. It’s way easier and you know it’s right bc that spring instantly pops into place.
??
Facts
THANK YOU DAMN ALL THESE VIDEOS I WATCHED …. all i had to do is read your comment
this was so much easier !!!
I did this way, and it's working bro, thanks, a lot easier. 👍🏽
Yes 🙌 can’t our this thing back in ! Thanks
Love blurry tutorials, thanks!
My dude I appreciate the video, it came in handy. I have a boost and it’s the same system.
Still couldn't get spring back in. Ended up using 2 zip ties in the other two screw holes then I screw the middle screw in. Much easier this way.
Could you dip that whole part, including the spring, into barbercide?
Once I opened and closed my gold babyliss trimmer, but it was never the same as before , it does not cut the hair anymore and just gets hairs and hurt
I have a Wahl Lithium Ion 2.0 that I was cleaning and I took it apart too far. That spring popped out and I can't figure out how to get it back in. Any suggestions?
Just saved me some money!!! Thanks
I was struggling to do this following the video, the spring would just keep popping out. I took everything off, then screwed in the bottom holder where the spring goes into, but halfway tight. Then turn it around so it actually faces the opposite way and not towards the blade. Slide the spring underneath and it should sit there, then you push this piece and the spring all the way round to face the right way up. Once that’s done, tighten the screw all the way and thats the hard bit done. Then just lift the 2 spring edges with a flathead screwdriver and slot the blade in underneath 2:04
Much love brothers and sisters 🙏❤️
My trimmers aren’t cutting like do I just need to buy a new blade? Cause the motor is fine and I just bought it like 3 months ago
Mine not cutting neither; after putting back together
This video saved me money
You can’t really see anything you see most of your hands but the rest looks foggy didn’t really help me but thank you for sharing explain things very well😊
would of been so helpful if I could see whatever the fuck you were trying to show in the most critical part of the reassembly.
The spring keep on popping out
Same
Yeah I’m having no luck.
same
I do it looks fine but it moves left and right and it wasn’t like that when I first unscrewed it. I have no idea what I did wrong
@fademasterlos where can i get a replacement screw that holds the spring down
God loves every single one no matter what🙏❤️
Will this work on a lo pro babyliss trimer
Yes it will just screw it in the push the prongs in and you'll be good
Atleast show properly how to attach the spring, everything is blurry except the title
Man I just did it but every time I turn it on, the red light goes on for a sec then nothing. And the batteries are full.
Thanks for the video where you can’t see any thing your doing 👍🏼
Where do you order a replacement spring for the Babyliss Pro clippers?
If you don’t have the spring. Usually better to buy a new set of blades.
Would u know how to do the babyliss pro trimmers?
Man thank you I almost brought a new blade 💪🏾🥶
My spring broke. Where can i buy one?
@49 Keyz Beats Amazon don't carry any.
Can you do another one?
Honestly they made the spring holder bs on purpose. It's designed to fail so you have to buy replacement parts. It's a god awful design.
I lost that small part is there any way tj geg jt back tigethrrv
This was clutch af thank bruh.
My spring keeps popping out every time I turn them on 🤦🏽♂️
Happend to me had to get a replacement unfortunately
Thank you king I was losing my damn mind
I love how you litterly can see nothing
Where to get the spring for the clippers?
They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades
Omg ty so much bro this helped
Your video is unclear no help
Access? It’s excess
Thank you 🙏🔥
In other words don't take that shit apart not worth time and effort.
Facts 💯
i had to use two people....i hold the plastic holder piece down flat with two thumbs while the second person screws
I was happy to find this video until I couldn’t see shit! Huh
u know where i can buy the spring ??? please
They don’t sell the spring by itself. You will have to buy the Babyliss trimmer blades for about $35-$40. They’ll come with a new spring with the blades
Having the prob on my supermotor uk .
It doesn’t have a spring holder
Uk trimmer are usually similar. Slightly different with power outlet.
@@FadeMasterLos thanks for reply . I figured out in the end . There’s no screw that holds in spring it’s a case of just fitting spring into the holes and then snapping back on the unit while holding blades down firmly and screwing down .
THANK YOU!!!!
i put it back and i jus bought my trimmers then it sounded bad
Thank you for your efforts but this is one of the most painful videos I’ve ever watched. Can’t see a thing.
Video didn’t help as the rag did nothing lol. I managed to get them in by putting the piece that goes on the spring backwards loose enough to slide the spring under it. I turned those around to how they are suppose to face and lifted the springs with some scissors so I could put in the black blade. You do have to insert the spring is shown above in order for them to work properly again!
God bless everyone 🙏❤️
you got the camera all blurry on the main part
Hell yea los I got it
Yo I still can’t get it bro
Which part you getting stuck on ?
Same I’m hella stuck
My metal part don’t lay flat when I put it down
@@jasonmoreno1895 I finally got it. You gotta add pressure bro
@@jasonmoreno1895 there not suppose to lay flat. The lay as if there a triangle facing up .
Lol got these babyliss fx skeletons a week ago and these motherfucking springs dont pop in🤦🏽♂️
You didn’t show where to put it back !
i will describe how to do it since this guy doesnt watch what he record and doesnt show anything , the easier way for me was to put the blade it self for half so it can easier be.
so what you need to do is put the string inside where it suppost to be then the bart with screw you put on top of the string , so the string is under the thing you need to have some force then you screw the bolt in and it will work fine
Bro this is a major F YOUUUUUUUUUU TO BABY liss bro ICANT EVEN USE THE TRIMMER AFTER TAKING IT APART TO SHARPEN IT THEY REALLY THINK THEY A FOREIGN CAR I FCKING HEATED YALL LUCKY IM NOT ASS OUT NOW I GOT 2.0s cuz THATS RIDICULOUS
Appreciate it cuz! 💪🏾
Can’t tell with the blurry vision
Ts don’t work for me
Thx you I love u bro
The very thing you are showing is unfocused. Common bro
Thanks, this shit was a pain
How can you use the clipper if the spring got lost
You must have the spring to use them.
Quality of that video is not good very blurry can’t really see
Gracias
Easyy????
Excess bruh excess
😂😂😂
Should be titled how to zoom your camera on your hands while I do something nobody can see
Great the hardes part wasn’t in focus
This was so blurry
can’t even see the thing bro
Jesus Christ thank u!!!
babyliss pros are absolute garbage, i bought 2 of them and the bullshit spring kept slipping out of position on both, they over complicated something that doesnt need to be that difficult to fix, the moment that spring comes out thats practically it for those clippers, unless you make your own makeshift spring to hold it in place. theres cheaper clippers on amazon that look like babyliss that dont even have that issue
3/4 out of focus impossible to see
Video is to blurry
Impossible
Access hair lol
Whole video out of focus….why even post this?
No grabas nada
Comon man remake the video focus sucks
I can’t with this fucking shit
We can’t see shit
couldn’t see half of the video thanks for nothing
Is very unfocused video
Kinda sucked couldn’t see crap but thanks for trying just not clear
You guys need to know how to make a video because half the things you were doing was impossible to see and you took it away too quick please get somebody else to do your videos
si ni se veee