I own 1 of these saws. And as long as you take care of it . They are little work horses. I've dropped mine out of a tree 40 ft picked it up and went right back to work. Good little saw.
I grabbed that other double bar studded $100 dollar 25cc top handle off eBay.,, it’s been a really great little saw! I’ve been very impressed by it! We dropped a 18” diameter oak tree that was 1/2 tore out by storm damage… I had the pole saw’s for the pruning job and we decided that it was ugly in front of the house…I added it’s removal cheap because it was going right into the woods line so no dumping.,, it was really impressive dropping that tree with my itty bitty saw and a wedge! LMFFAO! I love it for limbing and just clean up because it doesn’t weigh nothing!!! You can swing it around for a couple hours and you haven’t even been working!!! Super little weight.,, I’m gonna look into a panther bar and chain maybe! I’d love a little more bar…
cuts amazing, this model saw is really nostalgic to me, nice to see it cut that hard. i got clones like this when i started carving, very cheap parts, esspecially at the time, and i could get 1/4 pitch sprockets for m. got a walbro carb for it then as well. its a little bit of a lottery with these saws but they can run great, as you just demonstrated hehe 👍👍 great work! take care
I have always had trouble getting the screws out of an echo CS 300. Those four screws that hold the cylinder into the case are far beyond tight. I’ve had a few of those apart and they have all been the same. I dread when I have to take apart a top handle.
Last bit of carb tuning really bought it to life, sounds much more responsive and with a chunk more power too. If you want a bit more cutting speed .... drop the chain size to 0.043 narrow kerf bar and chain. My hopped up 26cc saw runs a modified Stihl 0.043 bar and chain, its a good step in right direction.
Hey Bud, thnx for the vid. appreciated! Is there a carb that can be bought for an upgrade? One guy commented on a Walbro. Whats your thoughts? I know you said at the time you couldnt find one
On a scale from 1 ..93, to 1125.. what’s this thing weigh, dressed? I don’t trust what the net says. I think they weighed the box. They also say my 193 is 7.28lbs and the 1125 is 5.2. But I’m almost positive that’s power head only. Anyone can help there’s a big thanks in it for ya. I just don’t know, I want a non clam so I can delete the base gasket and my (30cc clam) 193 is starting to give me cramps. I also have a 200t but knowing what I know I’m going to hang on to it. (…two 55’s, a 620.. and a 261c for toppin/chunkin;) With the published weights it don’t make sense till I know fo sho. I kinda want 1 of these and can buy 5 before I’m into what one 1125 costs. Can’t justify possibly getting a saw that weighs the same till then. Thanks. So if anyone knows what a dressed and wet 193, a 1125 and this guy weighs please post it up. Thanks again.
I own 1 of these saws. And as long as you take care of it . They are little work horses. I've dropped mine out of a tree 40 ft picked it up and went right back to work. Good little saw.
How much do you want for it?
Bless you Bellhopper. You always give us an amazing education watching you!!! It's always exciting, and the community is full of love and kindness!!!
That’s a mighty little Beast a little tune on cab and it come t life awesome job Hopper!!!!!!!!!!!!!
Bless you Bellhopper for sharing your life and Words of wisdom with us:)
That was so cool. That saw really woke up.
Great video series 😎👍
Great job again getting the SAW running better than it did before. Keep up the Good Work and Keep the Great Video's Coming.
I grabbed that other double bar studded $100 dollar 25cc top handle off eBay.,, it’s been a really great little saw! I’ve been very impressed by it! We dropped a 18” diameter oak tree that was 1/2 tore out by storm damage… I had the pole saw’s for the pruning job and we decided that it was ugly in front of the house…I added it’s removal cheap because it was going right into the woods line so no dumping.,, it was really impressive dropping that tree with my itty bitty saw and a wedge! LMFFAO! I love it for limbing and just clean up because it doesn’t weigh nothing!!! You can swing it around for a couple hours and you haven’t even been working!!! Super little weight.,, I’m gonna look into a panther bar and chain maybe! I’d love a little more bar…
Woke that baby right on up! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Sounds great Mr Hopper 👍
That's certainly Bellhoppered now 😉 it's certainly a happy little saw 👍👍👍👍
cuts amazing, this model saw is really nostalgic to me, nice to see it cut that hard.
i got clones like this when i started carving, very cheap parts, esspecially at the time, and i could get 1/4 pitch sprockets for m. got a walbro carb for it then as well. its a little bit of a lottery with these saws but they can run great, as you just demonstrated hehe 👍👍
great work! take care
Perfect timing
She's a rippa. ❤ from pnw oregon
God Bless and Protect you and your loving family:)
Looks like it’s ready for some climbing.
I have always had trouble getting the screws out of an echo CS 300. Those four screws that hold the cylinder into the case are far beyond tight. I’ve had a few of those apart and they have all been the same. I dread when I have to take apart a top handle.
Last bit of carb tuning really bought it to life, sounds much more responsive and with a chunk more power too. If you want a bit more cutting speed .... drop the chain size to 0.043 narrow kerf bar and chain. My hopped up 26cc saw runs a modified Stihl 0.043 bar and chain, its a good step in right direction.
Hope all is well buddy love the lil saw.
Very nice,sounds and cuts great
Impressive results for a 25cc saw, considering they can be had for under a 100 bucks stock.
Man, that runs way better!!!!
Good job. It runs so much better now. But I don't understand why they wouldn't come like that in the first place. Any disadvantages?
Wow she’s saucy 💪
Nice saw build
It needs a 372 carb
Fun build
hopper you lean it out a smidgen at the end? Also those little wren birds will take care of the ants and grubs
I richend it up she was lean buddy
How do these china saws compare to a old mini mac 110 or a eager beaver 2.0?
Hey Bud, thnx for the vid. appreciated! Is there a carb that can be bought for an upgrade? One guy commented on a Walbro. Whats your thoughts? I know you said at the time you couldnt find one
Hey buddy thank you i dont know of a carb that will just swap out im sure something could be
Can you run 50:1 mix in these, or do ya need to run 25:1 as I've read?
@@JD-ft2lr i dont recomend 50:1the bearings dont seem to hold up long without the extra oil buddy
Which setting we set if the engine is fully gassed after being released the engine is off or almost dead and then the gas is normal again
Thank..
Hello there Bellhopper. What size carb could you move up to on this saw? Can you give some advice on that one?
Hey buddy i couldnt find a carb to fit it thats why i drilled the bore on the carb on it
Surprised how decent these were even stock for the price ahahahah
Hey Bell, what do you recommend for a better chain option for it? Thnx!
Question is ware can you get cylinders and parts
Im guessing that little fella is sold already?
Hey! These saws are very loud. How to silence them? Do you have a way? Greetings from Poland!
Buy an electric saw.
What’s it cost to have that work done to a saw like that and how can one contact you
I just wish i could tune one right
Max revs for a stock one?
Hey, how much is one o dem dere digital thingamajiggey ?
Dyno joe has them im not sure what they cost now buddy
👍🔥
On a scale from 1 ..93, to 1125.. what’s this thing weigh, dressed? I don’t trust what the net says. I think they weighed the box. They also say my 193 is 7.28lbs and the 1125 is 5.2. But I’m almost positive that’s power head only. Anyone can help there’s a big thanks in it for ya. I just don’t know, I want a non clam so I can delete the base gasket and my (30cc clam) 193 is starting to give me cramps. I also have a 200t but knowing what I know I’m going to hang on to it. (…two 55’s, a 620.. and a 261c for toppin/chunkin;) With the published weights it don’t make sense till I know fo sho. I kinda want 1 of these and can buy 5 before I’m into what one 1125 costs. Can’t justify possibly getting a saw that weighs the same till then. Thanks. So if anyone knows what a dressed and wet 193, a 1125 and this guy weighs please post it up. Thanks again.
I never weight it but its not heavy its alittle heavier then the 2511
Where are you located?
P.S. l don't recommend dropping it 40 ft.😂🤣😂🤣