The amount of R&D that went into this along with the growth of a strong supportive community built with how open you maintined this entire endeavor to be is both admirable and mind-blowing, congratulations on the release! With the expeirence and communtiy grown from the Ocra, very excited to see what other crazy projects you'll come up with in the near future!
.....yal realize the atf is our nightmare and they're unconstitutionaly taking our rights all the time, we just stand by and let it happen. How sad the idea that a plastic ar that ain't gone last long is the atf's worst nightmare, the constitution is the atf's nightmare. We allow them to live outside of it.
If the last few years have proven anything it's that all of the rifles in the US will just continue to collect dust in gun safes and the US government will continue to do whatever they want
@@uspittbullbreader RUclips is being stupid and flagging videos where it’s being shown how to insert the mag. They’re categorizing it as “showing how to assemble”
@@uspittbullbreader can’t show inserting a 30 round mag anymore. Or threading on a suppressor which is stupid because movies on here show that so like tf?
Long story short: you know that conspiracy theory that the Biden administration is as going to bring in cheap labor from down south and do away with us? 100% real. We are the cavalry. No one is coming to save us.
No they wouldn't. Madison the main framer was Vehemently against the people. The entire design of our 3 branch system was made to suppress the power of the majority and benefit the opulent minority. Even Washington and Franklin discuss how to give the illusion of Democracy while maintaining complete control over the majority. As Madison discusses in the articals of confederation, what would happen I'm Britton if the majority had the right to vote for changes, they of course would vote to take away from the wealthy and g8ve it to the workers. Thus would always be the way the working class majority would vote. Our forefather did not give a flying fuck about our liberty. The liberals don't give a flying fuck, the conservatives don't give a flying fuck, our founders didn't give a fuck.
@Blunt yea hunting Game aka animals which is completely different than hunting humans - in laymen terms killing children at schools, and people enjoying their everday life?
@@vincentlee7359 Are you talking about the guy that started Defense Distributed and DEFCAD? Because yeah, he got arrested, but not "directly" for the 2A things he did. IIrc, he got arrested for something akin to S*xual Misconduct with a Minor, or something similar. Probably pushed by the ATF to take his site down, but the site is still up, even after he went down.
Nice update on the AR's design. So many manufacturers always make their AR's look alike, and this dude literally added his own aesthetics to design. Very nice
@James Alexander no, for proving that people will always find a way to access firearms, whether it be legal or illegal. If the government outlawed all firearms, then the only people who will have firearms will be outlaws
@James Alexander People who want to end life will find a way. Gasoline, fertilizer, zip-guns, knives, poison, and much more are available. In fact, many of the most successful serial killers simply used knives. Samuel Little (60 confirmed 93 alleged) simply ended many women just by strangulation with his bare hands. If only you knew.
@@AmericanMadeAdventures you laughing it’s the truth . once 3d printing becomes even more simpler and available everyone will have a assault rifle or gun .which equals more mass shootings/violence by anyone ,hell they already illegally 3d print switches for pistols and etc unless we work on why we have mass shooters in our society ,it can only end badly. not gonna lie like it won’t
If social media like RUclips didn’t censor stuff they don’t agree with, content like this would get millions of views like it did 7-10 years ago. Think about that
@@RichardCranium321 I think they don't like that, but with the current rules where you can't even insert a magazine I'm not sure they have much to lose anymore
@@williwonti if you're simply telling people about "longer form" content on alternative platforms then they have to create another rule or guideline.... which is coming. How long until you can't show 20 round mags? RUclips says that all firearm content has to abide by federal laws as well as California laws.... so how long until they start banning review videos of off roster firearms? RUclips can go fornicate themselves with a wire brush... rumble is the way
You can insert magazines, you no longer can insert whatever they decide today is a hurk-a-persidy merguzrn, like one that holds fifty clips in a drum fed belt buckle or whatever they mis-understand some hoplophobe groups current new rules to be this particular wind blowing season.
This is pretty industry changing. Imagine being able to set up small arms production this way and the implications this could have on manufacturing. You could honestly be on the threshold of something revolutionary.
@@elliot1784 being able to move R&D locally to any conflict zone/locale and set up production. Now with polymer ammo we could be making rifles and ammo anywhere as long as we have plastic and limited metal parts. The savings in weight and shipping alone would be substantial.
Dude! right on!! way to go!!! I especially like the modern aesthetics, kind of a Sci-Fi look like I would expect from a modern AR platform from the 21st century I just wish I had a 3d printer I would love to have a few of those 3d printed parts for my AR like the stock and grips you designed
Never had much interest in a 3D printed gun... but this one looks pretty clean and I really like the design and look of the rifle. I might have to invest in a 3D printer. The only thing I would add is a little picatinny on the handguard so you can have a decent backup sight. Oh and maybe some picatinny on the side so you can mount a light.
@@74KU Ah yes, another lovely day, another stupid humanoid not understanding the meaning of "ADHD" and using it as a substitute for "mass shooter" and "psychopath". Almost makes you wanna be proud of having ADHD.
Great build and I am impressed with your giving credit to others for your inspiration and ideas. Makes it a true community effort and one worth doing for oneself :) Congrats on a well done rifle!!!
I absolutely love where this project ended up and appreciate the shoutout! I'm glad my #badcad practices can be used for good instead of evil. I also quite enjoy the employment of a B cam. bravo my man!
I am super happy to see this project, finally be completed and in it's finale Rendition. I honestly been an 80%er instead of a 3D printer, and I have been waiting on this project for my first print regardless of how many 3D printers I have, this is the project I have been waiting on..!!! I hope my one suggestion helped on the brass ejection in either case I am stoked>!!!!! 🥰🥰❤❤❤❤
My guy.....I think you would be the first person on RUclips I have seen fully dressed out in the field dual shooting automatic 3D printed firearms completely barefoot....I am deeply disturbed but impressed all at once.
Watching from the UK. I'm not doing anything illegal. To my fedboy: this movement is activism - non-violent activity with a specific goal in mind _re_ legislation. Fuck you.
@@HoffmanTactical I completely understand thank you. I didn’t know if you kept running tally for informational purposes. I’m sure a lot of builders would like to know if they buy cheaper parts how much they could get away with on a very cheap build printed in PLA plus/pro. I know if you go with a lot of parts from the poverty pony Anderson arms or PSA you’re looking closer to the $400 range but if you got a Gucci/BCM/LM&T your at the 1200 price point. Thank you for all your hard work you are truly skilled and highly respected.
I can understand why it's not, since different people like different grip angles, but it would be cool to see it as an option...or perhaps the core of the grip being integral, with different front, back, and side panels to adjust the size and angle to maintain the ability to customize The only AR lowers I can think of with an integral grip are the KP15, and the SCR
@@pdxmarine1430 that would be pretty cool to have a modular system with sleeves or inserts to change the shape of the grip, but still utilize an integrated grip to avoid using fasteners where possible.
What happens when the major gun companies in America start selling and advertising 3d printed products? Is Google going to ban them from RUclips too? 3d printed guns are the future, and RUclips needs to take a less hypocritical stance when it comes to banning small content creators for talking about 3d printing guns, but not major corporations who sponsor Google.
These kind of things will become priceless if a war ever emerges. Instead of large weapon manufacturing centers, these could be made easily and covertly.
Near the end he says, "This entire video was intended just to let you know that this rifle has been released," after spending 8 minutes giving thanks and credit and acknowledgements to those involved in the community. THAT alone would encourage me to support this guy. Well done, sir! And also, nice work on the rifle :)
Fun fact, Magpul m3 mags are angled higher than m2 mags as they were designed to keep green tip from wearing out feed ramps. Only needed if you run green tip and don't like money as they cost more.
BROTHER YOU ARE LEAPS AND BOUNDS BEYOND OUR GOVT POLICIES AND RESTRICTIONS!!!KEEP ON MAKING GREAT CONTENT!!! AND ARMIMNG AMERICAN CITIZENS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Question, is it capable of being converted to .300blk without needing to modify the 3d printed parts? EDIT: I Read The Friendly Manual and it said that other calibers are at your own risk.
You are a beautiful human being and I hope you are blessed with a long wonderful life so we can see as much of this in the future as possible. You're based as hell.
I don't know if it was intentional or not, but I noticed the overall rounded design leading to a near total avoidance of sharp edges, combined with gradual tapers between transitions that drastically reduces the number of stress raisers in the material and should significantly prevent cracks from occurring, irrespective of material used.
Interesting how it seems we’ve gone from finding workarounds in the law to outright having an arms race of sorts with the govt to secure this technology.
awesome! now we gotta invent metal printing! I can't wait to see how far this technology will go! one day we really will have completely printable arms! 💪🏻🇺🇲💯
Metal printing is already invented, and may come to the home workshop (of the type of person who already has lathes and stuff) but not come to the home. To those that can legally do so, I suggest getting started with something blow-forward operated, since you don't need breech locking for that. Quarter-automatic (self-ejecting but not self-loading, like the PTRD) sounds perfectly achievable to me. To make the chamber for a tapered cartridge I suggest exploiting the 'unwanted' tapering in Cooper Zurad's ECM method. Not needing to feed from a magazine would also let you use the easier, self-headspacing cartridges like .45-70. Ejection could be as simple as tapping some muzzle gas to do direct-impingement ejection like the Striker-12 shotgun.
Amazing video and amazing build! I'm truly impressed by the design as well as the ability of printing as many of the parts as possible. The only issue I have with this video is a minor one. I have to watch it at 0.75 speed because you talk so way damn fast that I lose information as its playing. Nevertheless thats my problem. Can't wait for the continued testing and possible upgrades! 👍😎👍
'smooth on' task 7 flame out- cast from an old school mold ... cured it can handle an open flame for close to two minutes. It is strong and not immediately rigid.
@@HoffmanTactical my wife dated a black guy who was printing out 3d printed glocks and auto sears and he was selling them to gangs I hate these fools man they are the reason they are making gun laws in America bad . Like if you go to the town Stockton, California ur going to see so manny kids with ar pistols with braces dude kids walk around with ar15 pistols in there pants now because 9mm ain’t strong enough for them also you got these absolute animals for people in the streets with these guns the law makers have to go hard on them and for what ever reason they have to screw over the people who age the most responsible? This world is backwards 🧑🏿🦲s Aren’t smart they are filling or jails up and want to get rid of the police and just scam money so much money has to be spent because of these people. And these people blame the white people because we are privileged it’s not even that we are smarter and more superior to these idiots they haven’t don’t anything for this world are contributed. They just want to blame us for slavery generations later get over it . Every race has got it bad at some point we don’t need to play the blame game these people are lazy and just want money . I wish they never existed I wish they where out into cages and burnt to a crisp . After watching the Candace ownes documentary I really learned the truth about George Floyd that guy is a idiot he was on a bunch of fentanyl they lied those cops did absolutely nothing to him they did there job they are the true hero’s if you ask me .I just want to let you know this also if you got a issue with me what I do what I like and how I act please 🙏 please contact up “Tyler steel” @instagram I will reply so fast I have such a bad coke issue and have so much energy it’s noting for me to reply to ya fast and get into a argument that you won’t forget buddie I’m really proud of myself dude
My only questions are, if you do right how many rounds till failure? And if the nylon stuff is really good? Could you just print the whole thing out of it?
I support the right to bare feet
Grounding tames recoil and smoothes trigger pull
4:28
feet acquired 🔥🔥🔥🔥🔥🔥🔥🔥
hey thats neat
But what about the right to arm feet?
My god, that’s a beautiful rifle. I guess I’m a sucker for form-follows-function. It’s incredible to see how far 3D printing has advanced
The amount of R&D that went into this along with the growth of a strong supportive community built with how open you maintined this entire endeavor to be is both admirable and mind-blowing, congratulations on the release!
With the expeirence and communtiy grown from the Ocra, very excited to see what other crazy projects you'll come up with in the near future!
3D printed belt fed 🙏
Wow this is almost EU buildable 😅
ATF's worst nightmare, LOVE IT.
Can’t have a nightmare about that they don’t know about
.....yal realize the atf is our nightmare and they're unconstitutionaly taking our rights all the time, we just stand by and let it happen. How sad the idea that a plastic ar that ain't gone last long is the atf's worst nightmare, the constitution is the atf's nightmare. We allow them to live outside of it.
CCPs worst nightmare
No my friend, YOU are the ATF’s worst nightmare. One day they’ll stop dreaming
Pretty sure their worst nightmare is the one where they're visited by the 3 ghost dogs of gun control past, present, and future.
This young man is a true American. Thank you for your hard work and dedication to your channel!
Ensuring that no matter how hard they try, gun control will never work. It's beautiful.
@@dutch4260 Very sad that these coveted guns don't get used for their intended purpose, you know, overtaking a tyrannical government run by Israel?
If the last few years have proven anything it's that all of the rifles in the US will just continue to collect dust in gun safes and the US government will continue to do whatever they want
@@dutch4260 America is about Life Liberty and the Pursuit of Happiness - not about oversaturating the world with weapons.
Yep, now school shooters won't have to leave the house.
Lol that blurred mag insert. Great vid and design man! Can’t wait to build one!
I didn’t understand the need to blurt the reload.
@@uspittbullbreader youtube made new rules with guns no reloads, shooting and somthing else thats fucking dumb
@@uspittbullbreader RUclips is being stupid and flagging videos where it’s being shown how to insert the mag. They’re categorizing it as “showing how to assemble”
@@uspittbullbreader can’t show inserting a 30 round mag anymore. Or threading on a suppressor which is stupid because movies on here show that so like tf?
Appreciate the feedback. Crap I didn’t realize RUclips could get much dumber.
Your work is not only among the most impressive in the gun community but possibly among the most important.
Keep it up brother
Why?
Why consider this to be so important? Curious
@@elliot1784 because every man woman and child should have a rifle by their side. This makes it possible.
@@UnderwaterAlexJones 🇺🇸
Long story short: you know that conspiracy theory that the Biden administration is as going to bring in cheap labor from down south and do away with us? 100% real. We are the cavalry. No one is coming to save us.
Our forefathers would be proud of your work.
It was illegal to import iron into the colonies.
The king of England knew we would fight back.
No they wouldn't. Madison the main framer was Vehemently against the people. The entire design of our 3 branch system was made to suppress the power of the majority and benefit the opulent minority. Even Washington and Franklin discuss how to give the illusion of Democracy while maintaining complete control over the majority. As Madison discusses in the articals of confederation, what would happen I'm Britton if the majority had the right to vote for changes, they of course would vote to take away from the wealthy and g8ve it to the workers. Thus would always be the way the working class majority would vote. Our forefather did not give a flying fuck about our liberty. The liberals don't give a flying fuck, the conservatives don't give a flying fuck, our founders didn't give a fuck.
they would be, then they would roll over their grave when they discover the term "mass shooters" lol
Truly
@Blunt yea hunting Game aka animals which is completely different than hunting humans - in laymen terms killing children at schools, and people enjoying their everday life?
This is the first 3D printed firearms I've seen that just the design alone makes me much more comfortable with the idea of printing and using it.
ikr, live ammo in a plastic gun still sounds a bit sketchy for me though.
@@illuminerd3757 Kevlar is a form of plastic stronger than certain steels, though flammable but my point is that some plastics are very strong. 👍
There was another dude who did it first before this guy...but the US Government arrested him and YT banned his account.
@@vincentlee7359 Are you talking about the guy that started Defense Distributed and DEFCAD? Because yeah, he got arrested, but not "directly" for the 2A things he did. IIrc, he got arrested for something akin to S*xual Misconduct with a Minor, or something similar. Probably pushed by the ATF to take his site down, but the site is still up, even after he went down.
@@blackmoon8459 common libertarian L. for some reason a lot of those guys just can't leave kids alone.
This right here is the kind of stuff we need
Nice update on the AR's design. So many manufacturers always make their AR's look alike, and this dude literally added his own aesthetics to design. Very nice
This dude is going to be in the history books. Amazing
@James Alexander LOL
@James Alexander NPC
@James Alexander no, for proving that people will always find a way to access firearms, whether it be legal or illegal. If the government outlawed all firearms, then the only people who will have firearms will be outlaws
@James Alexander People who want to end life will find a way. Gasoline, fertilizer, zip-guns, knives, poison, and much more are available. In fact, many of the most successful serial killers simply used knives. Samuel Little (60 confirmed 93 alleged) simply ended many women just by strangulation with his bare hands. If only you knew.
@@AmericanMadeAdventures you laughing it’s the truth . once 3d printing becomes even more simpler and available everyone will have a assault rifle or gun .which equals more mass shootings/violence by anyone ,hell they already illegally 3d print switches for pistols and etc unless we work on why we have mass shooters in our society ,it can only end badly. not gonna lie like it won’t
If social media like RUclips didn’t censor stuff they don’t agree with, content like this would get millions of views like it did 7-10 years ago. Think about that
You mean creators should be uploading uncensored videos to Rumble and then advertise the rumble videos here on RUclips? I couldn't agree more
@@RichardCranium321 I think they don't like that, but with the current rules where you can't even insert a magazine I'm not sure they have much to lose anymore
@@williwonti if you're simply telling people about "longer form" content on alternative platforms then they have to create another rule or guideline.... which is coming. How long until you can't show 20 round mags? RUclips says that all firearm content has to abide by federal laws as well as California laws.... so how long until they start banning review videos of off roster firearms?
RUclips can go fornicate themselves with a wire brush... rumble is the way
You can insert magazines, you no longer can insert whatever they decide today is a hurk-a-persidy merguzrn, like one that holds fifty clips in a drum fed belt buckle or whatever they mis-understand some hoplophobe groups current new rules to be this particular wind blowing season.
I nurture my skin..
Your hat is awesome. Whoever picked it out for you has good tastes......
I think so too!
I agree!
This is pretty industry changing. Imagine being able to set up small arms production this way and the implications this could have on manufacturing. You could honestly be on the threshold of something revolutionary.
Hard to imagine. What do you think?
@@elliot1784 being able to move R&D locally to any conflict zone/locale and set up production. Now with polymer ammo we could be making rifles and ammo anywhere as long as we have plastic and limited metal parts. The savings in weight and shipping alone would be substantial.
@@Alpine_Wanderer sounds like something out of metal gear solid
Supply arms to South American civilians to fight cartels
No this IS revolutionary
The future is now. And I'm extremely impressed by your efforts and result.
Thank you for continuing to push the envelope on what is possible Tim!
Dude! right on!! way to go!!! I especially like the modern aesthetics, kind of a Sci-Fi look like I would expect from a modern AR platform from the 21st century I just wish I had a 3d printer I would love to have a few of those 3d printed parts for my AR like the stock and grips you designed
RUclips: I am going to end this man’s career
Yup. Sad. But we will move forward.
Never had much interest in a 3D printed gun... but this one looks pretty clean and I really like the design and look of the rifle. I might have to invest in a 3D printer. The only thing I would add is a little picatinny on the handguard so you can have a decent backup sight. Oh and maybe some picatinny on the side so you can mount a light.
100%!
The amount of pure swagger this man has is beyond insane
Dude clearly has ADHD.. trust not a person with control issues.
@@74KU what makes you say he has ADHD?
@@74KU Ah yes, another lovely day, another stupid humanoid not understanding the meaning of "ADHD" and using it as a substitute for "mass shooter" and "psychopath". Almost makes you wanna be proud of having ADHD.
Haha, Founding Fathers would be proud of you. Keep up the good work.
CONGRATS FROM CHILE FOR THAT BEAUTIFUL RIFLE! THE BEST WISHES BRO!
Thank you Hoffman Tactical … You are the definition of a free American!
never stop innovating, never stop pushing back
Great build and I am impressed with your giving credit to others for your inspiration and ideas. Makes it a true community effort and one worth doing for oneself :) Congrats on a well done rifle!!!
Hands down the best 3D printing channel out here not to take anything away from the others I like all of them
Thanks for blurring that dirty mag insert. My sensitive eyes couldn’t have survived it. Thanks ytube sensors for protecting me
I absolutely love where this project ended up and appreciate the shoutout! I'm glad my #badcad practices can be used for good instead of evil. I also quite enjoy the employment of a B cam. bravo my man!
We appreciate all your work
Great work on the Orca, even better that you used its release to shout out a bunch of designers and their work in this video.
Any word on the *not an FRT* trigger?
I do concur sir. need to know. freedom is barefoot
Dude the production quality is amazing
Incredible
Didn't know you where into printing!
I am super happy to see this project, finally be completed and in it's finale Rendition. I honestly been an 80%er instead of a 3D printer, and I have been waiting on this project for my first print regardless of how many 3D printers I have, this is the project I have been waiting on..!!! I hope my one suggestion helped on the brass ejection in either case I am stoked>!!!!! 🥰🥰❤❤❤❤
Thanks for all your hard work. I printed your AR10 lower. It works great. I look forward to this project
Thank you Hoffman Tactical and everyone else who worked on this. I've been waiting for this release.
This man is a master engineer!
You are doing a great service to society! Good bless and good luck 🍀
Bro, that actually looks cool AF! You're awesome and desperately needed in these times of freedoms theft.
My guy.....I think you would be the first person on RUclips I have seen fully dressed out in the field dual shooting automatic 3D printed firearms completely barefoot....I am deeply disturbed but impressed all at once.
Hoffman is the youngest OG in the game, Bravo! 👏
this chad slaps hard
God bless you and your work, love this
Can’t wait for the reinforcement orca kit to be back in stock!!
God bless you sir. Your efforts will help the people defend themselves against the evils who sit on top and call themselves benevolent.
This video is full of freedom
Excited for this one!
This man just got us all put on a watch list
Ong he did
Come on now. Are you really even an American if you're not on a watch list? You're not trying hard enough. I've been on a watch list since 1987.
@@runningbear1982 I’ve been on one I feel like since I’ve been 7 😭
Watching from the UK. I'm not doing anything illegal. To my fedboy: this movement is activism - non-violent activity with a specific goal in mind _re_ legislation. Fuck you.
Bro you’re so passionate about this. Thank you so much.
Thank you for you contribution to FREEDOM!!
I swear I had a dream about AR-15s in this exact color scheme and style last week. Haven't seen your work before, but Godspeed.
ATF is definitely giving this guy a visit. That's looking like he's got a fun switch.
Nope. Super Safety.
@@HoffmanTactical not sure what that is, but I'll Google it. No need to elaborate on this platform. Love your work.
@@boblong6759 It's an active trigger I have developed.
@@HoffmanTactical nice. I'm even more impressed with your work now.
I guess its some type of bump-fire trigger. Looks full auto to me too.
May God smile on you and your wonderful family.
What would you say as of today, would be the cost of manufacturing and buying the parts for the orca as opposed to purchasing an AR?
Depends a lot on what parts you buy. I'd say 400 to 1200.
youtube being a broken mess not showing replies when i click
@@HoffmanTactical I completely understand thank you. I didn’t know if you kept running tally for informational purposes. I’m sure a lot of builders would like to know if they buy cheaper parts how much they could get away with on a very cheap build printed in PLA plus/pro. I know if you go with a lot of parts from the poverty pony Anderson arms or PSA you’re looking closer to the $400 range but if you got a Gucci/BCM/LM&T your at the 1200 price point.
Thank you for all your hard work you are truly skilled and highly respected.
@@HoffmanTactical KAK Value-Line plus code “PSR” gets you a great setup
You can't show loading actual weapons but will they block airsoft loading ?
I would love to see the integrated pistol grip incorporated into your regular mil-spec compatible lowers
So would I.
I can understand why it's not, since different people like different grip angles, but it would be cool to see it as an option...or perhaps the core of the grip being integral, with different front, back, and side panels to adjust the size and angle to maintain the ability to customize
The only AR lowers I can think of with an integral grip are the KP15, and the SCR
@@pdxmarine1430 that would be pretty cool to have a modular system with sleeves or inserts to change the shape of the grip, but still utilize an integrated grip to avoid using fasteners where possible.
Excellent work. Keep fighting the good fight.
What happens when the major gun companies in America start selling and advertising 3d printed products? Is Google going to ban them from RUclips too? 3d printed guns are the future, and RUclips needs to take a less hypocritical stance when it comes to banning small content creators for talking about 3d printing guns, but not major corporations who sponsor Google.
Liking this video is worth getting bumped up on the watch list.
That is insanely cool !!! i dont do printing but i love the leaps you guys are all making i wish u much luck !!!!!
These kind of things will become priceless if a war ever emerges. Instead of large weapon manufacturing centers, these could be made easily and covertly.
I have a lot of respect for any man who shoots his videos barefoot
Brandon Herrera: who are you
Hoffman: you but stronger
Finally, what 3d printing was missing. Actually looking pretty
Near the end he says, "This entire video was intended just to let you know that this rifle has been released," after spending 8 minutes giving thanks and credit and acknowledgements to those involved in the community. THAT alone would encourage me to support this guy. Well done, sir!
And also, nice work on the rifle :)
Good work brother. I'm proud there are still patriots like you around.
Fun fact, Magpul m3 mags are angled higher than m2 mags as they were designed to keep green tip from wearing out feed ramps. Only needed if you run green tip and don't like money as they cost more.
BROTHER YOU ARE LEAPS AND BOUNDS BEYOND OUR GOVT POLICIES AND RESTRICTIONS!!!KEEP ON MAKING GREAT CONTENT!!! AND ARMIMNG AMERICAN CITIZENS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This opening is way too fun. Good video, great cinematography as well
Have you thought of making a piston driven upper? Just thinking about mitigating the heat inside of the upper.
What a cool looking design! I literally love it
Question, is it capable of being converted to .300blk without needing to modify the 3d printed parts?
EDIT: I Read The Friendly Manual and it said that other calibers are at your own risk.
Exactly. 300 should work, but has not been tested yet.
Immensely pleased to have stumbled across a 3d-printed Botkin 👌
The hat brings the whole thing of together.
Keep up the hard work bubba, you have a great opportunity to use your knowledge and skills for a good cause! God bless you
The hero we need but don't deserve
You are a beautiful human being and I hope you are blessed with a long wonderful life so we can see as much of this in the future as possible.
You're based as hell.
Thanks for this, keep up the great work.
Aite, playa, excellent work - it looks like a very well designed rifle
Hoffman... You're awesome....
I don't know if it was intentional or not, but I noticed the overall rounded design leading to a near total avoidance of sharp edges, combined with gradual tapers between transitions that drastically reduces the number of stress raisers in the material and should significantly prevent cracks from occurring, irrespective of material used.
Exactly.
great work as always man. i cant wait to get this bad boy printed
God damnit Hoffman, your work is legendary!
Interesting how it seems we’ve gone from finding workarounds in the law to outright having an arms race of sorts with the govt to secure this technology.
awesome! now we gotta invent metal printing! I can't wait to see how far this technology will go! one day we really will have completely printable arms! 💪🏻🇺🇲💯
Umm, how about a cnc machine?
Metal printing is already invented, and may come to the home workshop (of the type of person who already has lathes and stuff) but not come to the home.
To those that can legally do so, I suggest getting started with something blow-forward operated, since you don't need breech locking for that. Quarter-automatic (self-ejecting but not self-loading, like the PTRD) sounds perfectly achievable to me. To make the chamber for a tapered cartridge I suggest exploiting the 'unwanted' tapering in Cooper Zurad's ECM method. Not needing to feed from a magazine would also let you use the easier, self-headspacing cartridges like .45-70. Ejection could be as simple as tapping some muzzle gas to do direct-impingement ejection like the Striker-12 shotgun.
Amazing video and amazing build! I'm truly impressed by the design as well as the ability of printing as many of the parts as possible.
The only issue I have with this video is a minor one. I have to watch it at 0.75 speed because you talk so way damn fast that I lose information as its playing. Nevertheless thats my problem.
Can't wait for the continued testing and possible upgrades! 👍😎👍
A modern Phillip Luty, I like it. Keep up the good work brother.
I'm not seeing the connection to Phillip Luty. They've both done good work, but in completely different domains.
son, you put the biggest smile on my face. sic semper tyrannus
Looks amazing. All the work put into a project like this… very impressive on all levels.
Really good job on the video also. I had to subscribe.
I'm getting a refined American version vibe of FPSRUSSIA here. im liking it. Keep on rockin dude.
I hope this project gets a lot of positive attention. We need more people on this wave.
'smooth on' task 7 flame out- cast from an old school mold ... cured it can handle an open flame for close to two minutes. It is strong and not immediately rigid.
Awesome work. I'm curious, does this still work with 22lr CMMG bolt? With the angled magazine, I'm wondering if there are any feed issues.
I wonder the same. Should try it...
GOAT.. liked sub'd and commented. Thanks dude.. keep it up!
when will the kit be back in stock ?
great video keep up the great work !!
Kit's are going up every afternoon.
@@HoffmanTacticalhow are you shooting full auto ? Do you have some special license 🪪
@@This-account-is-hacked "dO yOU HaVe sOmE sPeCiAL liCenSe???" 🤓🤡
@@This-account-is-hacked Nope. Super safety.
@@HoffmanTactical my wife dated a black guy who was printing out 3d printed glocks and auto sears and he was selling them to gangs I hate these fools man they are the reason they are making gun laws in America bad . Like if you go to the town Stockton, California ur going to see so manny kids with ar pistols with braces dude kids walk around with ar15 pistols in there pants now because 9mm ain’t strong enough for them also you got these absolute animals for people in the streets with these guns the law makers have to go hard on them and for what ever reason they have to screw over the people who age the most responsible? This world is backwards 🧑🏿🦲s Aren’t smart they are filling or jails up and want to get rid of the police and just scam money so much money has to be spent because of these people. And these people blame the white people because we are privileged it’s not even that we are smarter and more superior to these idiots they haven’t don’t anything for this world are contributed. They just want to blame us for slavery generations later get over it . Every race has got it bad at some point we don’t need to play the blame game these people are lazy and just want money . I wish they never existed I wish they where out into cages and burnt to a crisp . After watching the Candace ownes documentary I really learned the truth about George Floyd that guy is a idiot he was on a bunch of fentanyl they lied those cops did absolutely nothing to him they did there job they are the true hero’s if you ask me .I just want to let you know this also if you got a issue with me what I do what I like and how I act please 🙏 please contact up “Tyler steel” @instagram I will reply so fast I have such a bad coke issue and have so much energy it’s noting for me to reply to ya fast and get into a argument that you won’t forget buddie I’m really proud of myself dude
0:16 i thought that mag was gonna crush a toe or two... 16 seconds in and you already got my sphincter puckered in suspense....
Hat looks good
Second that. Hats need to make a comeback for style
Keep doing the great work. The future thanks you.
How about that trigger too?
Look reminds me of XM-8, beautiful creation!
Why are you always barefoot?
We all on a list now boys
I've been on the list. No regrets.
My only questions are, if you do right how many rounds till failure? And if the nylon stuff is really good? Could you just print the whole thing out of it?