By the way I forgot to mention that I just bought the Steinberg UR22mkII today and I had followed all your instructions, and it was a smooth walk in the park while eating a piece of cake man!!! thanks again..
Very well done! You are a very decisive and clear communicator. Thank you for cutting out all the extra fluff and getting straight to the point! Extremely comprehensive video... I don't subscribe to many channels but you're on my list now! This was so helpful; easy to listen to and fun to watch. Thanks again!
Wow! 31 minutes from opening the box to a ready-to-mix song verse! It's a testament in its own right! I'd guess that your musicianship came before your recording-engineer status. Good Job and thanks! The installation process is usually intimidating to me. You made it look easy! BTW I have Reaper but use Cubase Pro and have never slept into the reaper's path. LOL
I'm just getting into home recording. Watching you set up the UR22 was super instructive and clear. Thank you!! A knowledgeable colleague and my local music store that caters to the pro musician both recommended this unit, too.
@@Purrrelll no its not its actually pretty decent i use to have this one. lmao if you cant make good music its not your interface its you. lmfao bunch of trolls
I think you are first supposed to install the Yamaha driver, only then your PC will recognize the audio interface when you plug it via USB. So it's normal that the USB light did not power on at the beginning of the video. Similarly, the firmware update file will only run if you have the interface already connected via USB to your computer (Windows 10 here). Thank you so much for the extremely useful video about this thingy.
I would like to thank you very much for your video. I watched it, took several notes and was able to set up my new studio in just a few hours. The whole recording process now goes smoothly and flawlessly. Thanks again. Your video was very helpful.
Thnku for giving... Such a good knowledge ..... Sir.... Each and evry thing u said from purchasing to explantion ... Line by line... But 1 sad think i have seen that ur subscriber is not much... I hope it will increase ... Carry on .. And give ur best.. From india..😍😘
Thanks for posting the video, been doing quite a bit of research for the beginner gear, and looking at this unit in particular. Think I'll pull the trigger.
Thank you for posting this video. I bought a UR22 a few years back and use Reaper but could not figure out how to exactly configure it since every programs settings are different.
You are an inspiration. I have paid attention to this audio interface for a while, I have a Line 6 UX1 and I am not happy with it. The only thing that concerns me is that I have read more than one time that the Steinberg doesn't have enough headphone output
The headphone output was a little low on my Sennheiser HD380 phones, so I'd imagine it'd be even lower with higher impedance phones. If it's a problem, you could always use a headphone amp like the little Behringer HA400
I have in mind a 35 ohm headphones. Yours are 54 ohms. Will that difference in ohms be noticeable enough in your opinion? Also, I am looking around for a headphone amp that is reasonably good an affordable but that is small and with internal battery so I can move it around, do you know of any?
That should be fine for headphones. I'm not aware of a battery operated headphone amp. But I'd be interested to see if there is such a thing, and if it can deliver long enough battery life to be worth it. I'll have to look around.
Great explanatory video, you are very sympathetic! I have a problem with it though, more specifically the interconnection to a Traktor Kontrol S2 Mk3. Its hooked up to the front of the UR22 with an RCA to Cinch cable, both are connected to my laptop via usb and yamaha speakers left and right at the back of the audio interface. Now Traktor Pro is giving me a hard time regarding the master control of the controller, I couldn't prelisten the tracks on it or change the volume via master, until I found out that the RCA to Cinch connection is needed. BUT NOW there is no bass coming out of the speakers, I tried it with and without the yamaha steinberg software, I tried different interconnections of master accesses, one time the interface was master, another time the controller (which has a soundcard build into it), and funnily enough every other source like YT for example works fine, bass is present. So I researched more and more and found out that the software inside of my computer might address a nonexistent subwoofer with the bassline...can I change that through the ASIO of the yamaha steinberg software (didn't look like it though -.-), where do I go for it in my laptop, or do I try with Traktor Pro first? What would you suggest, do you know of a problem similar maybe? Thank you for your help, stay tuned!
I'll need to read up on that control surface a bit more. I don't have any experience with anything like it, but I'll see if I can wrap my head around it.
pls someone help, i’m having the same problem where my interface won’t turn on when plugged directly into the computer how do i go about using a USB hub with it? don’t i need to plug the interface into the computer somehow too?
thanks for the wonderful video, watching you is really entertaining and educational at the same time, you made it all so much easy and interesting, more power to your channel,
I just love you right now for posting this video. Steinberg should do this because they've made their own products so hard to deal with. I know they will be going out of business soon probably because no one is going to want to deal with the many complications you face trying to get their products to work. There are numerous other products that I'm about 99% sure are like a millions times easier to deal with.
IMPORTANT: ALWAYS INSTALL THE DRIVERS BEFORE YOU PLUG THE AUDIO INTERFACE IN. It could cause problems otherwise. That's probably why nothing lit up when you plugged it at first, as your next step after that was installing the drivers
Hi, didn't you have to make any mismatch fixes? I have a presonus audiobox usb and it has mismatch errors when recording or with the midi, what PC are you using?
I have this exact unit and cannot get it to work with an older MacBook Pro running high Sierra 10.6?. Digital input to Mac is severely distorted (like a bit rate mismatch). Also get a Midi error. Downloaded latest Steinberg driver....no help. Have run it off external power no help. Any ideas to resolve would be appreciated.
Gracias por el video.. son muy buenas las Interface Steinberg, y ha un precio Fantastico.. soy usuario de Steinberg desde siempre, Ahora con el Nuendo 11 super contento un saludo 🙌
Now that you've got a good modern computer, you can probably get your latency down low enough to start monitoring through the DAW. I just like it because I get to hear any effects that I have on the track as I record, but there's nothing wrong with direct monitoring either.
Cheers - would be handy if you could knock up a quick "how to" at some point for how to reduce your latency to its lowest possible level in Reaper. Reducing buffer sizes, sample rates etc. I just leave mine as default - 'cos I only ever direct monitor having a 20ms latency doesn't bother me much, its just irritating when programming drums.
Your first plug in attempt would have worked right away if you had first downloaded the software driver stuff on your computer, then it would have been able to read the interface with that first thing you tried to plug in and would have showed it light up right away for that too. Just FYI. Lol
Unfortunately, I don't think it would have helped. My USB ports apparently weren't providing enough power. As soon as I gave it a full 5V, it connected without drivers installed. Before that, it wasn't even giving a flashing USB connection light, it was just dead altogether. Maybe it was a particularly sensitive or faulty unit?
i need help i cant hear anything in my headphones unless the mix knob is twisted up a little bit even if my headphone volume knob is all the way up. when listening to anything not just in my daw
Hi! Thankyou for this great video, it has been very useful. I have two importants questions: - You need put the phones pot to the max with a 54 ohms headphones. I have a pair of DT-770 Pro 250 ohms, so that means that I won't listen my headphones at high volume if I need it? - Can you use the DI input without using the Hi-Z for electric guitars? Normally it's so annoying to send to the interface a too low gain signal because you have to push the amp sim and sometimes it simply can't, I mean: if you plug your guitar in with Hi-Z disabled you gets peaks all the time? Even if you have very low the gain knob? THANK YOU AGAIN!
I would expect a pair of 250 ohm headphones to be a little quieter, but I don't have a pair of phones on hand with that high of impedance. So I can't try it myself and give a definitive answer. As for the Hi-Z input, I'd expect it to have plenty of gain on tap. I wouldn't worry about not getting a strong enough signal. You can definitely try the Lo-Z line input, but the difference in input impedance will likely affect the tone. That may or may not be a bad thing, but it's worth a try.
your power light should be blinking without the driver--your going to have a ton of cracks and pops if you run this through a hub ( evidently not-Steinberg directions are wrong)----so far-I Am impressed with you -pretty good skills and a cool personality -cool riff-great bass :-)
In all of my years of learning about audio interfaces, running one through an USB hub has always been a big no-no. I was really surprised to see that it actually worked, and worked very well!
You need to select 32 samples to get in the 2-3ms latency range. Just bump it back up when you do your mixing to avoid playback errors (pops & clicks).
Nah, he should have checked the latency after choosing a frequency. The higher the frequency, the lower the latency, it helps the buffer. So that panel was probably showing much less latency after setting it in 48 (I'd recommend at least 96 though). Edit: Just in case I double checked his vid, you can see how going 48 lowered his latency both ways by .200 ms or so. Again, 96 makes it much lower, and this one goes up to 192, which is what I would personally use.
Sir my name is Sukhwinder Singh I'm from India ...Which is really the best audio interface ? Steinbergur22c or Audient Evo 4 or Audient id 4mkii .... I have to work with a window laptop, but I want to do a voiceover, please tell me which is best audio Interface for Voice over ?
I've heard they're better if youre running Windows. The focusrite's drivers don't like windows and you'll end up with blue screens. I've read a few people haven't had any issues with the focusrite and windows, but I'm not taking the chance.
One from best video tutorial on, from any sound cards ever. I buy this product because tutorial is best on youtube. And works it in Win7 and 10. Against Scarlett 2i2, which has a lot problems on PC. All sellers, rspectively Steinberg should by pay behind this video.
I plugged my in today and it worked fine with the USB port. The drivers are on the disk and it worked fine. It takes too long to do it the way you are doing it. I loaded the drivers from the disk in half the time you did.
What driver and firmware versions were on the disk? I highly recommend to ALWAYS download drivers and firmware directly from the manufacturer's website. That way you are guaranteed to get the most up-to-date drivers. There is no telling how long ago those drivers were written to that disk. They could be several versions old by the time you open the box. The disk is really only there for those without an internet connection.
mine works fine, no regrets. its like a soundcard. a century ago i had a soundblaster xf or something, with a control panel under the cd rom, and this reminds me of it. i wonder why there are no soundcards around any more. making music with the onboard stuff is crap.
Hey thanks! Back then I was using a Canon Powershot G7X as my #2 camera. It's a great little camera, and you can probably find them relatively cheap on the secondhand market at this point.
Thanks for this. I have a question. With Loopback function enabled, I can let people via internet hear everything I play right? Like the old Stereo Mix function on windows. So if I play a karaoke and I sing on it with effects enabled via software, people can hear everything right?
Good question! I didn't end up playing with the loopback function while I had this interface, and now I wish I had. From what I understand by reading the online manual, I believe that it does what you're wanting. You might want to read page 7 of the manual here just to make sure that this is the behavior that you're wanting: download.steinberg.net/downloads_hardware/UR22mkII/UR22mkII_documentation/ur22mkII_en_om_a0.pdf
Please help I've done everything you did in the video and I still can't hear my guitar, I use guitar rig 5. Also I have usb headphones connected on my pc and I want to hear my guitar through them do I have to connect my headphones on the soundcard ?
I wonder how to connect this thing to work like a microphone on windows ten. Windows detects it as a line input, the sound goes only from one side of the headphone. How to convert the line input into a normal microphone input without any programs like voicemeter?
hey. i tride to start working whit ur 242 and i gut this~ "error ur is not detected. please check the connection and reboot this software". what can i do?
Good day, Sir! The video was informative and amusing. You kept me interested throughout the duration of the video. Anyways, I'd like some suggestion. I want to do podcast / stream / record audio in near future, hopefully. I am completely clueless regarding how all of this works. I was only aware of, or know a little bit about, USB-microphones. Which are often times frowned upon by most audiophiles and people with lots of experience and music know-how. I was planning to purchase Blue Yeti. But my budget allowed me to go a little ahead, emphasis on "little", and perhaps get the "real deal". There are not many places I can purchase from. I have been watching reviews of different microphones everyday. But I can't help but dazzled by the way more crisp sound of a "proper" set-up. Of course, I cannot afford that, but anything that comes close to it -for a start-up, would be really great! Here is the website that I plan to purchase some kind of set-up from. musicguide.com.pk I found this. Focusrite Scarlet 2i2 ( 2nd gen) + setup (package) at a price I can almost afford. My budget is almost 40,000rs. If you happen to have some free time on your hands, could you please browse around the site and recommend me a set-up from there? Like, most things that would be important for me to record decently. Please not that I can only use USB-based audio interface. Also, I do not plan to use any musical instruments with it anytime soon. As lower as it can get, while maintaining good value for money, is my goal.
Excuse, I am use only youtube translator. Therefore please, how is call studio, which is available for this Steinberg device? Some Cubase ? Some number? Thanks for reply. Reaper V5.80 is better program for work with sounds ? Respectively I need some maximale simpl software. Thankd for reply.
The UR22 comes with Cubase AI and Cubasis LE. Cubase AI is a lite edition of Cubase, with some of the more advanced features unavailable. Cubasis is a DAW for mobile devices. They should both be good options for someone just starting out. Personally, I prefer Reaper but I encourage you to try all of the DAW demos that you can find and choose which is best for your workflow.
Great regards, if you can tell me which is the better sound card of Steinberg UR22mkII or behringer umc202hd u-fora ... I am interested in and which is better in terms of latencies because I use quite a lot of effects in live .. what do you recommend me for shopping and why: ) and if you have a driver for the mixer behringer qx10002usb i have a problem with popup and now nzm has put the problem to the driver .. the big greeting
I haven't used the UMC404HD or its drivers, I've only used the UMC22 from the U-Phoria line, and that interface relies on ASIO4ALL drivers instead of dedicated drivers. So I'm not sure how well the UMC404 will perform. The UR22MkII did very well, with nice low latency at its lowest ASIO buffer sizes.
Hey, i just got my new Steinberg UR22mkll. I got a little bit coffused, do Steinberg have kind of Gearbox like what Line 6 got ? Hope you see this, it means a lot. Thankyou.
My headphone out sounds garbled and not sure what exactly is going wrong with it.. I have UR22C, but it is pretty much the same unit. What you made sounds like fun. Rest of it, my unit works fabulously well.. tried lowering the sample rate and the computer seems to handle it well.
Hi my friend, I have a question, I'll record guitar using a mic'd amp with the Shure sm57, so wich interface is the better choise for me, this one or the Focusrite 2i2?, I want to record two guitars as the same time. Using two mics and both interface inputs. Thanks for your amazing reviews!!!
I recently tried out the 2i2 for recording direct guitar/bass, and its inputs are even hotter than the UR22. I'm not 100% sure that this lack of headroom carries over to the XLR input if you're recording a dynamic mic in front of a raging cranked amplifier, but it was definitely a concern for the direct inputs on both the 2i2 and the UR22.
when i got my self a UA-4FX from roland the first time that i plugged into my pc it didn't start up. After installing the usb driver the thing powered up. Maybe that's the case with this interface too.
Thanks! Honestly, they're really neck-and-neck. They're both solid all-around interfaces. The UR22mkII preamps have just a tiny bit more "personality", but it's really subtle. I don't think that you can go wrong with either.
@@YHRS Thanks! I may go with the Steinberg, as the variable latency knob seems to be a pretty handy feature. I do like the aesthetics of that Roland a little more though...
So this needs an external power supply to work? What would you recommend between UR22mkII and 2i2 2nd Gen for mostly recording guitars on the go with my laptop?
I had to plug it into a powered USB hub in order to get any signs of life out of it, but that may be more of an issue with the USB ports on my computer, rather than a problem with the unit itself. I'm not 100% sure. You could probably use a separate USB-->micro USB cable from another port on your laptop to power it. I wish I'd thought to test that before I sent the interface away! I haven't used a 2i2 2nd gen yet so I can't compare them directly. Although out of the ~$150 interfaces I've used so far, the Roland Rubix is still in the lead as my favorite. But any of them will be fine. If you've got super hot pickups, then you might run into troubles though.
Your Home Recording Studio Thanks for the reply! What about the U-Phoria UMC22? With these drivers (BEHRINGER_2902_X64_2.8.40) will it work ok on windows 10 64bit, with latency around 3-4ms? Or its totally random what i'm going to get, so i shouldn't bother and buy a UR22mkII that is guarantee to work with Reaper?
Have you experimented with mic pres to see if it kills the preamp noise floor these produce? I used to have the 8 channel and sropped recording and then got an itch to start again and I remember these having noise, but I also bought a grace m101.. just curious if you already knew if a good preamp would eliminate any noise that that sits under the sound. Partly why I quit was due to always having to mix out noise. recorded for 15 years strong and one day I just stopped. I still have every waves bundle, api, isotope, etc.. loads of stuff. I added it up long ago and was well over 150k in plugins. But I never bought a higher end decent mic pre to go with it until now.. just crappy art ma 2. And presonus junk... I got so good at editing with all of the plugs that I could neve justify buying one. But I think it will help give a stronger cleaner signal to manipulate.
![FNAF Into the Pit has A LOT of Unused Graphics | LOST BITS [TetraBitGaming]](http://i.ytimg.com/vi/6YhZCRdipl4/mqdefault.jpg)
By the way I forgot to mention that I just bought the Steinberg UR22mkII today and I had followed all your instructions, and it was a smooth walk in the park while eating a piece of cake man!!! thanks again..
That's great to hear! So glad that this was helpful!
@@YHRS I think I've just decided to buy UR22mkII. You gave my all the necessary informations first hand.
Very well done! You are a very decisive and clear communicator. Thank you for cutting out all the extra fluff and getting straight to the point! Extremely comprehensive video... I don't subscribe to many channels but you're on my list now! This was so helpful; easy to listen to and fun to watch. Thanks again!
Thank you so much!
Ta
Wow! 31 minutes from opening the box to a ready-to-mix song verse! It's a testament in its own right! I'd guess that your musicianship came before your recording-engineer status. Good Job and thanks! The installation process is usually intimidating to me. You made it look easy! BTW I have Reaper but use Cubase Pro and have never slept into the reaper's path. LOL
Thanks so much! Glad you enjoyed it, and thanks for the kind words.
Only 3 words:
Nice Review Sir
really appreciate this video , been trying to get my stuff to work for a long time and now back in action thanks to your channel
I'm just getting into home recording. Watching you set up the UR22 was super instructive and clear. Thank you!! A knowledgeable colleague and my local music store that caters to the pro musician both recommended this unit, too.
That's so great to hear! I hope it helped you get up and running and making music (instead of yelling curse words :D )
It is a poor interface.
@@Purrrelll no its not its actually pretty decent i use to have this one. lmao if you cant make good music its not your interface its you. lmfao bunch of trolls
Street Logic buzz off dude.
I think you are first supposed to install the Yamaha driver, only then your PC will recognize the audio interface when you plug it via USB. So it's normal that the USB light did not power on at the beginning of the video. Similarly, the firmware update file will only run if you have the interface already connected via USB to your computer (Windows 10 here). Thank you so much for the extremely useful video about this thingy.
This was quite informative - really learned a lot ! Thanks for making this video - good job!
I would like to thank you very much for your video. I watched it, took several notes and was able to set up my new studio in just a few hours. The whole recording process now goes smoothly and flawlessly. Thanks again. Your video was very helpful.
best teacher when it comes downloding hardware
Thanks so much. That really cleared things up a lot for 66 year old guy with limited it knowledge. Terrific thanks
Thanks for the refresher on these install topics! Saved me a stress
I've just bought myself the same Unit today and your tutorial was useful, thanks very much. I hope it will work for me too!
Thanks for posting this video. It’s cleared up a lot of the questions I had, as I’m interested in buying one. 👍🏻
Super helpful video, thanks for doing this!
Awesome video please make more on this particular set up
Thnku for giving... Such a good knowledge ..... Sir.... Each and evry thing u said from purchasing to explantion ... Line by line... But 1 sad think i have seen that ur subscriber is not much... I hope it will increase ... Carry on .. And give ur best.. From india..😍😘
Thanks for posting the video, been doing quite a bit of research for the beginner gear, and looking at this unit in particular. Think I'll pull the trigger.
Very good, have a great time making music with the UR22mkII!
Thank you for posting this video. I bought a UR22 a few years back and use Reaper but could not figure out how to exactly configure it since every programs settings are different.
Very very helpfull! Thank you very much! Congrats for this video!
Terrific video. Super informative and offers a lot of clarity to setting up. Thanks.
You are an inspiration. I have paid attention to this audio interface for a while, I have a Line 6 UX1 and I am not happy with it. The only thing that concerns me is that I have read more than one time that the Steinberg doesn't have enough headphone output
The headphone output was a little low on my Sennheiser HD380 phones, so I'd imagine it'd be even lower with higher impedance phones. If it's a problem, you could always use a headphone amp like the little Behringer HA400
I have in mind a 35 ohm headphones. Yours are 54 ohms. Will that difference in ohms be noticeable enough in your opinion? Also, I am looking around for a headphone amp that is reasonably good an affordable but that is small and with internal battery so I can move it around, do you know of any?
That should be fine for headphones. I'm not aware of a battery operated headphone amp. But I'd be interested to see if there is such a thing, and if it can deliver long enough battery life to be worth it. I'll have to look around.
You just made my day! Had some issues at first but your video helped a god damn layman. Thanks alot!
Thanks, I'm so glad that you found it helpful!
Great explanatory video, you are very sympathetic! I have a problem with it though, more specifically the interconnection to a Traktor Kontrol S2 Mk3. Its hooked up to the front of the UR22 with an RCA to Cinch cable, both are connected to my laptop via usb and yamaha speakers left and right at the back of the audio interface. Now Traktor Pro is giving me a hard time regarding the master control of the controller, I couldn't prelisten the tracks on it or change the volume via master, until I found out that the RCA to Cinch connection is needed. BUT NOW there is no bass coming out of the speakers, I tried it with and without the yamaha steinberg software, I tried different interconnections of master accesses, one time the interface was master, another time the controller (which has a soundcard build into it), and funnily enough every other source like YT for example works fine, bass is present. So I researched more and more and found out that the software inside of my computer might address a nonexistent subwoofer with the bassline...can I change that through the ASIO of the yamaha steinberg software (didn't look like it though -.-), where do I go for it in my laptop, or do I try with Traktor Pro first? What would you suggest, do you know of a problem similar maybe? Thank you for your help, stay tuned!
I'll need to read up on that control surface a bit more. I don't have any experience with anything like it, but I'll see if I can wrap my head around it.
pls someone help, i’m having the same problem where my interface won’t turn on when plugged directly into the computer
how do i go about using a USB hub with it? don’t i need to plug the interface into the computer somehow too?
thanks for you your review, you are real a talent of digital music!
Thank you very much!
thanks for the wonderful video, watching you is really entertaining and educational at the same time, you made it all so much easy and interesting, more power to your channel,
My 10 years old MacBook powers it well. I also use a phone charger or power bank if I connect it to iPad.
Fun and complete review from a fellow reaper user about to get one of these used. Thank you : ) liked and subscribed
Thanks for this tutorial..I'll follow it.justbuy my audio interface like u.
I just love you right now for posting this video. Steinberg should do this because they've made their own products so hard to deal with. I know they will be going out of business soon probably because no one is going to want to deal with the many complications you face trying to get their products to work. There are numerous other products that I'm about 99% sure are like a millions times easier to deal with.
Thank you so much...!! You really saved me!!
Oh man, that's so great to hear!
IMPORTANT: ALWAYS INSTALL THE DRIVERS BEFORE YOU PLUG THE AUDIO INTERFACE IN. It could cause problems otherwise.
That's probably why nothing lit up when you plugged it at first, as your next step after that was installing the drivers
Thank you so much for helping.
your review was a pleasure
Hi, didn't you have to make any mismatch fixes? I have a presonus audiobox usb and it has mismatch errors when recording or with the midi, what PC are you using?
thanks for the video mate, it helped me a lot. cheers
I have this exact unit and cannot get it to work with an older MacBook Pro running high Sierra 10.6?. Digital input to Mac is severely distorted (like a bit rate mismatch). Also get a Midi error. Downloaded latest Steinberg driver....no help. Have run it off external power no help. Any ideas to resolve would be appreciated.
Fixed it....update was being blocked by a security setting on my MBP . Works now.
Glad to hear that you got it sorted out!
Awesome! Thank you
Thanks a lot for the video! You're my saviour xD
Gracias por el video.. son muy buenas las Interface Steinberg, y ha un precio Fantastico.. soy usuario de Steinberg desde siempre, Ahora con el Nuendo 11 super contento
un saludo 🙌
Cheers mate. I've actually never monitored through the DAW.
Now that you've got a good modern computer, you can probably get your latency down low enough to start monitoring through the DAW. I just like it because I get to hear any effects that I have on the track as I record, but there's nothing wrong with direct monitoring either.
Cheers - would be handy if you could knock up a quick "how to" at some point for how to reduce your latency to its lowest possible level in Reaper. Reducing buffer sizes, sample rates etc. I just leave mine as default - 'cos I only ever direct monitor having a 20ms latency doesn't bother me much, its just irritating when programming drums.
Your first plug in attempt would have worked right away if you had first downloaded the software driver stuff on your computer, then it would have been able to read the interface with that first thing you tried to plug in and would have showed it light up right away for that too. Just FYI. Lol
Unfortunately, I don't think it would have helped. My USB ports apparently weren't providing enough power. As soon as I gave it a full 5V, it connected without drivers installed. Before that, it wasn't even giving a flashing USB connection light, it was just dead altogether. Maybe it was a particularly sensitive or faulty unit?
i need help i cant hear anything in my headphones unless the mix knob is twisted up a little bit even if my headphone volume knob is all the way up. when listening to anything not just in my daw
THANKS FOR THE HELP!!
Thank you for the video! very helpful !
thanks that was so helpful!
So what power input option u used to connect to usb bus power? The usb A port or the micro usb (5v) port?
Hi! Thankyou for this great video, it has been very useful. I have two importants questions:
- You need put the phones pot to the max with a 54 ohms headphones. I have a pair of DT-770 Pro 250 ohms, so that means that I won't listen my headphones at high volume if I need it?
- Can you use the DI input without using the Hi-Z for electric guitars? Normally it's so annoying to send to the interface a too low gain signal because you have to push the amp sim and sometimes it simply can't, I mean: if you plug your guitar in with Hi-Z disabled you gets peaks all the time? Even if you have very low the gain knob?
THANK YOU AGAIN!
I would expect a pair of 250 ohm headphones to be a little quieter, but I don't have a pair of phones on hand with that high of impedance. So I can't try it myself and give a definitive answer.
As for the Hi-Z input, I'd expect it to have plenty of gain on tap. I wouldn't worry about not getting a strong enough signal. You can definitely try the Lo-Z line input, but the difference in input impedance will likely affect the tone. That may or may not be a bad thing, but it's worth a try.
your power light should be blinking without the driver--your going to have a ton of cracks and pops if you run this through a hub ( evidently not-Steinberg directions are wrong)----so far-I Am impressed with you -pretty good skills and a cool personality -cool riff-great bass :-)
In all of my years of learning about audio interfaces, running one through an USB hub has always been a big no-no. I was really surprised to see that it actually worked, and worked very well!
Great video, thanks for the demo
You bet, and thanks for watching!
Thank you for the tutorial. Can u please share how tO setup the metronome?
I bought it... Best in this budget
You need to select 32 samples to get in the 2-3ms latency range. Just bump it back up when you do your mixing to avoid playback errors (pops & clicks).
Nah, he should have checked the latency after choosing a frequency. The higher the frequency, the lower the latency, it helps the buffer. So that panel was probably showing much less latency after setting it in 48 (I'd recommend at least 96 though).
Edit: Just in case I double checked his vid, you can see how going 48 lowered his latency both ways by .200 ms or so. Again, 96 makes it much lower, and this one goes up to 192, which is what I would personally use.
Great interaction, Thanks
What jack adapter you use?
I have a problem with headphones
Sir my name is Sukhwinder Singh
I'm from India ...Which is really the best audio interface ? Steinbergur22c or Audient Evo 4 or Audient id 4mkii ....
I have to work with a window laptop, but I want to do a voiceover, please tell me which is best audio Interface for Voice over ?
Are these Steinberg interfaces better than the Focusrite ones ?
I've heard they're better if youre running Windows. The focusrite's drivers don't like windows and you'll end up with blue screens.
I've read a few people haven't had any issues with the focusrite and windows, but I'm not taking the chance.
@@bryanmmusic I guess everything depends on your system...I've decided to go with a Focusrite Scarlett (Windows user)
what program did you use to record the video? How was it able to capture AISIO output without having the "loopback" feature on?
Thank you so much!!! This is really helpful
One from best video tutorial on, from any sound cards ever. I buy this product because tutorial is best on youtube. And works it in Win7 and 10. Against Scarlett 2i2, which has a lot problems on PC. All sellers, rspectively Steinberg should by pay behind this video.
Can you make a video on setting this interface with electronic drums?
Man, you're great :), thanks for that presentation
Thank you! I really appreciate it!
I plugged my in today and it worked fine with the USB port. The drivers are on the disk and it worked fine. It takes too long to do it the way you are doing it. I loaded the drivers from the disk in half the time you did.
What driver and firmware versions were on the disk? I highly recommend to ALWAYS download drivers and firmware directly from the manufacturer's website. That way you are guaranteed to get the most up-to-date drivers. There is no telling how long ago those drivers were written to that disk. They could be several versions old by the time you open the box. The disk is really only there for those without an internet connection.
love you from India, nice explained
Thank you!
Im using ur22c, why is my interface has massive reverb?
Yamaha own Steinberg now
Is it supported to mac mini or not?? can you please tell me
This helped a lot thank you!
mine works fine, no regrets. its like a soundcard. a century ago i had a soundblaster xf or something, with a control panel under the cd rom, and this reminds me of it. i wonder why there are no soundcards around any more. making music with the onboard stuff is crap.
hey man what was the camera you had on the mic stand/tripod? has the screen that flips forward. great videos man.
Hey thanks! Back then I was using a Canon Powershot G7X as my #2 camera. It's a great little camera, and you can probably find them relatively cheap on the secondhand market at this point.
Really helpful. Thank you!!
hey i need help. my mac recognize my steinberg as a MIDI. not an input device. how can i fix this? thankyou so much
Nice review as usual! Would you recommend this over the Roland Rubix 22?
Thanks for this. I have a question. With Loopback function enabled, I can let people via internet hear everything I play right? Like the old Stereo Mix function on windows. So if I play a karaoke and I sing on it with effects enabled via software, people can hear everything right?
Good question! I didn't end up playing with the loopback function while I had this interface, and now I wish I had. From what I understand by reading the online manual, I believe that it does what you're wanting. You might want to read page 7 of the manual here just to make sure that this is the behavior that you're wanting: download.steinberg.net/downloads_hardware/UR22mkII/UR22mkII_documentation/ur22mkII_en_om_a0.pdf
Please help I've done everything you did in the video and I still can't hear my guitar, I use guitar rig 5. Also I have usb headphones connected on my pc and I want to hear my guitar through them do I have to connect my headphones on the soundcard ?
yes you do
I wonder how to connect this thing to work like a microphone on windows ten. Windows detects it as a line input, the sound goes only from one side of the headphone. How to convert the line input into a normal microphone input without any programs like voicemeter?
hey. i tride to start working whit ur 242 and i gut this~ "error ur is not detected. please check the connection and reboot this software". what can i do?
Good day, Sir!
The video was informative and amusing.
You kept me interested throughout the duration of the video.
Anyways, I'd like some suggestion.
I want to do podcast / stream / record audio in near future, hopefully.
I am completely clueless regarding how all of this works.
I was only aware of, or know a little bit about, USB-microphones.
Which are often times frowned upon by most audiophiles and people with lots of experience and music know-how.
I was planning to purchase Blue Yeti.
But my budget allowed me to go a little ahead, emphasis on "little", and perhaps get the "real deal".
There are not many places I can purchase from.
I have been watching reviews of different microphones everyday.
But I can't help but dazzled by the way more crisp sound of a "proper" set-up.
Of course, I cannot afford that, but anything that comes close to it -for a start-up, would be really great!
Here is the website that I plan to purchase some kind of set-up from.
musicguide.com.pk
I found this.
Focusrite Scarlet 2i2 ( 2nd gen) + setup (package) at a price I can almost afford.
My budget is almost 40,000rs.
If you happen to have some free time on your hands, could you please browse around the site and recommend me a set-up from there?
Like, most things that would be important for me to record decently.
Please not that I can only use USB-based audio interface.
Also, I do not plan to use any musical instruments with it anytime soon.
As lower as it can get, while maintaining good value for money, is my goal.
Excuse, I am use only youtube translator. Therefore please, how is call studio, which is available for this Steinberg device?
Some Cubase ? Some number? Thanks for reply. Reaper V5.80 is better program for work with sounds ? Respectively I need some maximale simpl software. Thankd for reply.
The UR22 comes with Cubase AI and Cubasis LE. Cubase AI is a lite edition of Cubase, with some of the more advanced features unavailable. Cubasis is a DAW for mobile devices. They should both be good options for someone just starting out. Personally, I prefer Reaper but I encourage you to try all of the DAW demos that you can find and choose which is best for your workflow.
Thanks for explain, ....:-)
Your Home Recording Studio FL Studio is the best in all and im workflow especially too
It seems that UR 22 Mk2 is best choice.....Thanks...again...:-) Early I buy It....
Love you men❤ thanks to help me
Great regards, if you can tell me which is the better sound card of Steinberg UR22mkII or behringer umc202hd u-fora ... I am interested in and which is better in terms of latencies because I use quite a lot of effects in live .. what do you recommend me for shopping and why: ) and if you have a driver for the mixer behringer qx10002usb i have a problem with popup and now nzm has put the problem to the driver .. the big greeting
I haven't used the UMC404HD or its drivers, I've only used the UMC22 from the U-Phoria line, and that interface relies on ASIO4ALL drivers instead of dedicated drivers. So I'm not sure how well the UMC404 will perform. The UR22MkII did very well, with nice low latency at its lowest ASIO buffer sizes.
Thank u very much, i have a quation..how can I install '' Reaper Preferences '' ? ist ok with Windows 7 ?
very thorough. thank you!
Hey, i just got my new Steinberg UR22mkll. I got a little bit coffused, do Steinberg have kind of Gearbox like what Line 6 got ? Hope you see this, it means a lot. Thankyou.
thank u for ur video
I was in a Music store they had one for 89.00 it was missing a power cord and didn’t come with software do you think it’s worth it.
My headphone out sounds garbled and not sure what exactly is going wrong with it.. I have UR22C, but it is pretty much the same unit. What you made sounds like fun. Rest of it, my unit works fabulously well.. tried lowering the sample rate and the computer seems to handle it well.
Hi my friend, I have a question, I'll record guitar using a mic'd amp with the Shure sm57, so wich interface is the better choise for me, this one or the Focusrite 2i2?, I want to record two guitars as the same time. Using two mics and both interface inputs. Thanks for your amazing reviews!!!
I recently tried out the 2i2 for recording direct guitar/bass, and its inputs are even hotter than the UR22. I'm not 100% sure that this lack of headroom carries over to the XLR input if you're recording a dynamic mic in front of a raging cranked amplifier, but it was definitely a concern for the direct inputs on both the 2i2 and the UR22.
I have an error problem. Error : UR is not detected. Please check the connection and rebot this software. How t fix it ? Help Me Please.
Did you ever figure out the problem? I have the same error code.
very very practical review!!!
when i got my self a UA-4FX from roland the first time that i plugged into my pc it didn't start up. After installing the usb driver the thing powered up. Maybe that's the case with this interface too.
thank you , great tutorial!
Hey man, great review! Would you pick this Steinberg over the Roland Rubix 22? Not sure which one to get...
Thanks! Honestly, they're really neck-and-neck. They're both solid all-around interfaces. The UR22mkII preamps have just a tiny bit more "personality", but it's really subtle. I don't think that you can go wrong with either.
@@YHRS Thanks! I may go with the Steinberg, as the variable latency knob seems to be a pretty handy feature. I do like the aesthetics of that Roland a little more though...
is anyone else having an issue with the audio being really quiet from it?
So this needs an external power supply to work? What would you recommend between UR22mkII and 2i2 2nd Gen for mostly recording guitars on the go with my laptop?
I had to plug it into a powered USB hub in order to get any signs of life out of it, but that may be more of an issue with the USB ports on my computer, rather than a problem with the unit itself. I'm not 100% sure. You could probably use a separate USB-->micro USB cable from another port on your laptop to power it. I wish I'd thought to test that before I sent the interface away!
I haven't used a 2i2 2nd gen yet so I can't compare them directly. Although out of the ~$150 interfaces I've used so far, the Roland Rubix is still in the lead as my favorite. But any of them will be fine. If you've got super hot pickups, then you might run into troubles though.
Your Home Recording Studio Thanks for the reply! What about the U-Phoria UMC22? With these drivers (BEHRINGER_2902_X64_2.8.40) will it work ok on windows 10 64bit, with latency around 3-4ms? Or its totally random what i'm going to get, so i shouldn't bother and buy a UR22mkII that is guarantee to work with Reaper?
Thank you every much
Cool!
Why most interfaces don't have the MIX KNOB (input/DAW) like this UR22mkII ?
This is so useful.
Which better ? roland rubix 22 or ur 22 mk ii ?
Have you experimented with mic pres to see if it kills the preamp noise floor these produce? I used to have the 8 channel and sropped recording and then got an itch to start again and I remember these having noise, but I also bought a grace m101.. just curious if you already knew if a good preamp would eliminate any noise that that sits under the sound. Partly why I quit was due to always having to mix out noise. recorded for 15 years strong and one day I just stopped. I still have every waves bundle, api, isotope, etc.. loads of stuff. I added it up long ago and was well over 150k in plugins. But I never bought a higher end decent mic pre to go with it until now.. just crappy art ma 2. And presonus junk... I got so good at editing with all of the plugs that I could neve justify buying one. But I think it will help give a stronger cleaner signal to manipulate.